mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-19 06:08:12 +07:00
783,905 commits
| SHA1 | ||
|---|---|---|
[ Upstream commit 25355252607ca288f329ee033f387764883393f6 ] A cpumask structure on the stack can cause a warning with CONFIG_NR_CPUS=8192 (e.g. Ubuntu 16.04 and 18.04 use this): drivers/hv//channel_mgmt.c: In function ‘init_vp_index’: drivers/hv//channel_mgmt.c:702:1: warning: the frame size of 1032 bytes is larger than 1024 bytes [-Wframe-larger-than=] Nowadays it looks most distros enable CONFIG_CPUMASK_OFFSTACK=y, and hence we can work around the warning by using cpumask_var_t. Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: <Stable@vger.kernel.org> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Dexuan Cui
authored and
 Greg Kroah-Hartman
commited |
56628c1936 | |
[ Upstream commit fb7d70db305a1446864227abf711b756568f8242 ]
When running fault injection test, I hit somewhat wrong behavior in f2fs_gc ->
gc_data_segment():
0. fault injection generated some PageError'ed pages
1. gc_data_segment
-> f2fs_get_read_data_page(REQ_RAHEAD)
2. move_data_page
-> f2fs_get_lock_data_page()
-> f2f_get_read_data_page()
-> f2fs_submit_page_read()
-> submit_bio(READ)
-> return EIO due to PageError
-> fail to move data
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaegeuk Kim
authored and
Greg Kroah-Hartman
commited |
a28549b8c1 | |
[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ]
For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:
* Active: Security chip is functional
* Inactive: Security chip is visible, but is not functional
* Disabled: Security chip is hidden and is not functional
When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.
Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
tpm tpm0: TPM is disabled/deactivated (0x6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass! (rc=6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.
In that case the kernel log is cleaner and less confusing for users, i.e:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: TPM is disabled/deactivated (0x6)
ima: No TPM chip found, activating TPM-bypass! (rc=6)
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Javier Martinez Canillas
authored and
Greg Kroah-Hartman
commited |
f4b5f4393b | |
[ Upstream commit 554fab6dbf20ee7298ed2d4e8398b85e6058abb7 ] Currently when requesting a specific voltage or current through the psy interface, for PPS, when reading back from that interface the values will always be the same as previously given, if the request was successful. However PPS only allows for 20mV voltage steps and 50mA current steps, and the psy class expects microvolt and micro amp requests, so inbetween values can be provided through this interface. Really when reading back the true values negotiated should be given, and not the ones originally asked for. To report the actual values negotiated with the Source, the values stored are now rounded down to the relevant step units prior to building the PPS request, so that those values are later correctly reported through the psy interface. In addition this improves the adjustments made to meet the operating power requirements of the platform, which previously could have been slightly out due to not using valid PPS units of voltage and current. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Adam Thomson
authored and
Greg Kroah-Hartman
commited |
1808341191 | |
[ Upstream commit 0652d4b6b56f73c81abbdbc7e26f772cb2dfe370 ]
The IRQ physical address is allocated from region 0, rather than
the highest region. Update the driver to reserve this region in
the bitmap and to use region 0 for all types of interrupt.
This corrects a problem which prevents the interrupt being
signalled correctly if using the first address in the AXI region,
since an offset of zero will always be mapped to region 0.
Fixes:
Alan Douglas
authored and
Greg Kroah-Hartman
commited |
7c190bb8c9 | |
[ Upstream commit 074d6f32689ce05a084b6fa3db38445745bf11cc ]
The Mediatek's host controller has two slots, each with its own control
registers. The host driver needs to identify what slot is connected to
what port in order to access the device's configuration space.
Current code retrieving slot connected to a given endpoint device.
Assuming each slot is connected to one endpoint device as below:
host bridge
bus 0 --> __________|_______
| |
| |
slot 0 slot 1
bus 1 -->| bus 2 --> |
| |
EP 0 EP 1
During PCI enumeration, system software will scan all the PCI devices on
every bus starting from devfn 0. Using PCI_SLOT(devfn) for matching an
endpoint to its slot is erroneous in that the devfn does not contain the
hierarchical bus numbering in it. In order to match an endpoint with its
slot (and related port), the PCI tree must be walked up to the root bus
(where the root ports are situated) and then the PCI_SLOT(devfn)
matching logic can be correctly applied for matching.
This patch fixes the mtk_pcie_find_port() slot matching logic by adding
appropriate PCI tree walking code to retrieve the slot/port a given
endpoint is connected to.
Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Honghui Zhang
authored and
Greg Kroah-Hartman
commited |
1a5908ddbe | |
[ Upstream commit 325b9313ec3be56c8e2fe03f977fee19cec75820 ] atmel,oc-gpio is optional. Request its irq only when atmel,oc is set in device tree. devm_gpiod_get_index_optional returns NULL if -ENOENT. Check its return value for NULL before error, because it is more probable that atmel,oc is not set. This fixes the following errors on boards where atmel,oc is not set in device tree: [ 0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ [ 0.960000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ [ 0.970000] at91_ohci 500000.ohci: failed to request gpio "overcurrent" IRQ Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Tudor.Ambarus@microchip.com
authored and
Greg Kroah-Hartman
commited |
49c8a09eaa | |
[ Upstream commit d455f29f6d76a5f94881ca1289aaa1e90617ff5d ] Fix possible recursive lock warning. Its a false warning as the locks are part of two differnt HW Queue data structure - cmdq and creq. Debug kernel is throwing the following warning and stack trace. [ 783.914967] ============================================ [ 783.914970] WARNING: possible recursive locking detected [ 783.914973] 4.19.0-rc2+ #33 Not tainted [ 783.914976] -------------------------------------------- [ 783.914979] swapper/2/0 is trying to acquire lock: [ 783.914982] 000000002aa3949d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.914999] but task is already holding lock: [ 783.915002] 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915013] other info that might help us debug this: [ 783.915016] Possible unsafe locking scenario: [ 783.915019] CPU0 [ 783.915021] ---- [ 783.915034] lock(&(&hwq->lock)->rlock); [ 783.915035] lock(&(&hwq->lock)->rlock); [ 783.915037] *** DEADLOCK *** [ 783.915038] May be due to missing lock nesting notation [ 783.915039] 1 lock held by swapper/2/0: [ 783.915040] #0: 00000000be73920d (&(&hwq->lock)->rlock){..-.}, at: bnxt_qplib_service_creq+0x2a/0x350 [bnxt_re] [ 783.915044] stack backtrace: [ 783.915046] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.0-rc2+ #33 [ 783.915047] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 783.915048] Call Trace: [ 783.915049] <IRQ> [ 783.915054] dump_stack+0x90/0xe3 [ 783.915058] __lock_acquire+0x106c/0x1080 [ 783.915061] ? sched_clock+0x5/0x10 [ 783.915063] lock_acquire+0xbd/0x1a0 [ 783.915065] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915069] _raw_spin_lock_irqsave+0x4a/0x90 [ 783.915071] ? bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915073] bnxt_qplib_service_creq+0x232/0x350 [bnxt_re] [ 783.915078] tasklet_action_common.isra.17+0x197/0x1b0 [ 783.915081] __do_softirq+0xcb/0x3a6 [ 783.915084] irq_exit+0xe9/0x100 [ 783.915085] do_IRQ+0x6a/0x120 [ 783.915087] common_interrupt+0xf/0xf [ 783.915088] </IRQ> Use nested notation for the spin_lock to avoid this warning. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Selvin Xavier
authored and
Greg Kroah-Hartman
commited |
6a89b3a67a | |
[ Upstream commit ed51efd2ce44091a858ad829f666727e7c95695e ] In the failure path, nq->bar_reg_iomem gets accessed without initializing. Avoid this by calling the bnxt_qplib_nq_stop_irq only if the initialization is complete. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes:
Selvin Xavier
authored and
Greg Kroah-Hartman
commited |
0b27b2b279 | |
[ Upstream commit 4d6e4d12da2c308f8f976d3955c45ee62539ac98 ] IPCB should be cleared before icmp_send, since it may contain data from previous layers and the data could be misinterpreted as ip header options, which later caused the ihl to be set to an invalid value and resulted in the following stack corruption: [ 1083.031512] ib0: packet len 57824 (> 2048) too long to send, dropping [ 1083.031843] ib0: packet len 37904 (> 2048) too long to send, dropping [ 1083.032004] ib0: packet len 4040 (> 2048) too long to send, dropping [ 1083.032253] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.032481] ib0: packet len 23960 (> 2048) too long to send, dropping [ 1083.033149] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033439] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.033700] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034124] ib0: packet len 63800 (> 2048) too long to send, dropping [ 1083.034387] ================================================================== [ 1083.034602] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0xf08/0x1310 [ 1083.034798] Write of size 4 at addr ffff880353457c5f by task kworker/u16:0/7 [ 1083.034990] [ 1083.035104] CPU: 7 PID: 7 Comm: kworker/u16:0 Tainted: G O 4.19.0-rc5+ #1 [ 1083.035316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 1083.035573] Workqueue: ipoib_wq ipoib_cm_skb_reap [ib_ipoib] [ 1083.035750] Call Trace: [ 1083.035888] dump_stack+0x9a/0xeb [ 1083.036031] print_address_description+0xe3/0x2e0 [ 1083.036213] kasan_report+0x18a/0x2e0 [ 1083.036356] ? __ip_options_echo+0xf08/0x1310 [ 1083.036522] __ip_options_echo+0xf08/0x1310 [ 1083.036688] icmp_send+0x7b9/0x1cd0 [ 1083.036843] ? icmp_route_lookup.constprop.9+0x1070/0x1070 [ 1083.037018] ? netif_schedule_queue+0x5/0x200 [ 1083.037180] ? debug_show_all_locks+0x310/0x310 [ 1083.037341] ? rcu_dynticks_curr_cpu_in_eqs+0x85/0x120 [ 1083.037519] ? debug_locks_off+0x11/0x80 [ 1083.037673] ? debug_check_no_obj_freed+0x207/0x4c6 [ 1083.037841] ? check_flags.part.27+0x450/0x450 [ 1083.037995] ? debug_check_no_obj_freed+0xc3/0x4c6 [ 1083.038169] ? debug_locks_off+0x11/0x80 [ 1083.038318] ? skb_dequeue+0x10e/0x1a0 [ 1083.038476] ? ipoib_cm_skb_reap+0x2b5/0x650 [ib_ipoib] [ 1083.038642] ? netif_schedule_queue+0xa8/0x200 [ 1083.038820] ? ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.038996] ipoib_cm_skb_reap+0x544/0x650 [ib_ipoib] [ 1083.039174] process_one_work+0x912/0x1830 [ 1083.039336] ? wq_pool_ids_show+0x310/0x310 [ 1083.039491] ? lock_acquire+0x145/0x3a0 [ 1083.042312] worker_thread+0x87/0xbb0 [ 1083.045099] ? process_one_work+0x1830/0x1830 [ 1083.047865] kthread+0x322/0x3e0 [ 1083.050624] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 1083.053354] ret_from_fork+0x3a/0x50 For instance __ip_options_echo is failing to proceed with invalid srr and optlen passed from another layer via IPCB [ 762.139568] IPv4: __ip_options_echo rr=0 ts=0 srr=43 cipso=0 [ 762.139720] IPv4: ip_options_build: IPCB 00000000f3cd969e opt 000000002ccb3533 [ 762.139838] IPv4: __ip_options_echo in srr: optlen 197 soffset 84 [ 762.139852] IPv4: ip_options_build srr=0 is_frag=0 rr_needaddr=0 ts_needaddr=0 ts_needtime=0 rr=0 ts=0 [ 762.140269] ================================================================== [ 762.140713] IPv4: __ip_options_echo rr=0 ts=0 srr=0 cipso=0 [ 762.141078] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x12ec/0x1680 [ 762.141087] Write of size 4 at addr ffff880353457c7f by task kworker/u16:0/7 Signed-off-by: Denis Drozdov <denisd@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Denis Drozdov
authored and
Greg Kroah-Hartman
commited |
ebd7595dca | |
[ Upstream commit e54b6a3bcd1ec972b25a164bdf495d9e7120b107 ]
Add missing check for failure of cm_init_av_by_path
Fixes:
Leon Romanovsky
authored and
Greg Kroah-Hartman
commited |
9f7a37efdf | |
[ Upstream commit 0f6ef65d1c6ec8deb5d0f11f86631ec4cfe8f22e ]
If the provider driver (such as rdma_rxe) doesn't support pma counters,
avoid exposing its directory similar to optional hw_counters directory.
If core fails to read the PMA counter, return an error so that user can
retry later if needed.
Fixes:
Parav Pandit
authored and
Greg Kroah-Hartman
commited |
bc280cf529 | |
[ Upstream commit 47db7873136a9c57c45390a53b57019cf73c8259 ] In megasas_mgmt_compat_ioctl_fw(), to handle the structure compat_megasas_iocpacket 'cioc', a user-space structure megasas_iocpacket 'ioc' is allocated before megasas_mgmt_ioctl_fw() is invoked to handle the packet. Since the two data structures have different fields, the data is copied from 'cioc' to 'ioc' field by field. In the copy process, 'sense_ptr' is prepared if the field 'sense_len' is not null, because it will be used in megasas_mgmt_ioctl_fw(). To prepare 'sense_ptr', the user-space data 'ioc->sense_off' and 'cioc->sense_off' are copied and saved to kernel-space variables 'local_sense_off' and 'user_sense_off' respectively. Given that 'ioc->sense_off' is also copied from 'cioc->sense_off', 'local_sense_off' and 'user_sense_off' should have the same value. However, 'cioc' is in the user space and a malicious user can race to change the value of 'cioc->sense_off' after it is copied to 'ioc->sense_off' but before it is copied to 'user_sense_off'. By doing so, the attacker can inject different values into 'local_sense_off' and 'user_sense_off'. This can cause undefined behavior in the following execution, because the two variables are supposed to be same. This patch enforces a check on the two kernel variables 'local_sense_off' and 'user_sense_off' to make sure they are the same after the copy. In case they are not, an error code EINVAL will be returned. Signed-off-by: Wenwen Wang <wang6495@umn.edu> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Wenwen Wang
authored and
Greg Kroah-Hartman
commited |
51b6d8b00d | |
[ Upstream commit cfb634fe3052aefc4e1360fa322018c9a0b49755 ]
According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit
qualification field for debug exceptions are reserved (cleared to
0). However, the SDM is incorrect about bit 16 (corresponding to
DR6.RTM). This bit should be set if a debug exception (#DB) or a
breakpoint exception (#BP) occurred inside an RTM region while
advanced debugging of RTM transactional regions was enabled. Note that
this is the opposite of DR6.RTM, which "indicates (when clear) that a
debug exception (#DB) or breakpoint exception (#BP) occurred inside an
RTM region while advanced debugging of RTM transactional regions was
enabled."
There is still an issue with stale DR6 bits potentially being
misreported for the current debug exception. DR6 should not have been
modified before vectoring the #DB exception, and the "new DR6 bits"
should be available somewhere, but it was and they aren't.
Fixes:
Jim Mattson
authored and
Greg Kroah-Hartman
commited |
3223e55786 | |
[ Upstream commit 9607871f37dc3e717639694b8d0dc738f2a68efc ]
The following code in the linux/ndctl header file:
static inline const char *nvdimm_bus_cmd_name(unsigned cmd)
{
static const char * const names[] = {
[ND_CMD_ARS_CAP] = "ars_cap",
[ND_CMD_ARS_START] = "ars_start",
[ND_CMD_ARS_STATUS] = "ars_status",
[ND_CMD_CLEAR_ERROR] = "clear_error",
[ND_CMD_CALL] = "cmd_call",
};
if (cmd < ARRAY_SIZE(names) && names[cmd])
return names[cmd];
return "unknown";
}
is broken in a number of ways:
(1) ARRAY_SIZE() is not generally defined.
(2) g++ does not support "non-trivial" array initialisers fully yet.
(3) Every file that calls this function will acquire a copy of names[].
The same goes for nvdimm_cmd_name().
Fix all three by converting to a switch statement where each case returns a
string. That way if cmd is a constant, the compiler can trivially reduce it
and, if not, the compiler can use a shared lookup table if it thinks that is
more efficient.
A better way would be to remove these functions and their arrays from the
header entirely.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells
authored and
Greg Kroah-Hartman
commited |
cd888e8a12 | |
[ Upstream commit f4bb7704699beee9edfbee875daa9089c86cf724 ] With commit 
Evan Green
authored and
Greg Kroah-Hartman
commited |
f2470959c1 | |
[ Upstream commit fd47d919d0c336e7c22862b51ee94927ffea227a ]
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:
scsi host1: DMA length is zero!
scsi host1: cur adr[04380000] len[00000000]
The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.
The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.
Fixes:
Finn Thain
authored and
Greg Kroah-Hartman
commited |
1057c64748 | |
[ Upstream commit 173ee3962959a1985a109f81539a403b5cd07ae7 ] Commit 
Rob Herring
authored and
Greg Kroah-Hartman
commited |
1db5dec2dd | |
[ Upstream commit 6aaa58c994277647f8b05ffef3b9b225a2d08f36 ] I noticed kmemleak report memory leak when run create/stop md in a loop, backtrace: [<000000001ca975e7>] mempool_create_node+0x86/0xd0 [<0000000095576bcd>] md_run+0x1057/0x1410 [md_mod] [<000000007b45c5fc>] do_md_run+0x15/0x130 [md_mod] [<000000001ede9ec0>] md_ioctl+0x1f49/0x25d0 [md_mod] [<000000004142cacf>] blkdev_ioctl+0x680/0xd00 The root cause is we alloc mddev->flush_pool and mddev->flush_bio_pool in md_run, but from do_md_stop will not call into md_stop but __md_stop, move the mempool_destroy to __md_stop fixes the problem for me. The bug was introduced in 
Jack Wang
authored and
Greg Kroah-Hartman
commited |
b5e07d44b0 | |
[ Upstream commit af9b926de9c5986ab009e64917de87c9758bab10 ]
flush_pool is leaked when flush bio size is zero
Fixes:
Xiao Ni
authored and
Greg Kroah-Hartman
commited |
fbf975efbf | |
[ Upstream commit 78efac537de33faab9a4302cc05a70bb4a8b3b63 ] Now, we have supported cgroup writeback, it depends on correctly IO account of specified filesystem. But in commit 
Chao Yu
authored and
Greg Kroah-Hartman
commited |
64c90d9c15 | |
[ Upstream commit ac63043d8cb5503c7e0fe110f947eacf2663804e ]
Use the new of_get_compatible_child() helper to lookup the mdio-internal
child node instead of using of_find_compatible_node(), which searches
the entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the mdio-mux node). Fortunately, this was inadvertently
balanced by a failure to drop the mdio-mux reference after lookup.
While at it, also fix the related mdio-internal- and phy-node reference
leaks.
Fixes:
Johan Hovold
authored and
Greg Kroah-Hartman
commited |
5151f4407d | |
[ Upstream commit a90e90b7d55e789c71d85b946ffb5c1ab2f137ca ] We have seen a customer complaining about soft lockups on !PREEMPT kernel config with 4.4 based kernel [1072141.435366] NMI watchdog: BUG: soft lockup - CPU#21 stuck for 22s! [systemd:1] [1072141.444090] Modules linked in: mpt3sas raid_class binfmt_misc af_packet 8021q garp mrp stp llc xfs libcrc32c bonding iscsi_ibft iscsi_boot_sysfs msr ext4 crc16 jbd2 mbcache cdc_ether usbnet mii joydev hid_generic usbhid intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_ssif mgag200 i2c_algo_bit ttm ipmi_devintf drbg ixgbe drm_kms_helper vxlan ansi_cprng ip6_udp_tunnel drm aesni_intel udp_tunnel aes_x86_64 iTCO_wdt syscopyarea ptp xhci_pci lrw iTCO_vendor_support pps_core gf128mul ehci_pci glue_helper sysfillrect mdio pcspkr sb_edac ablk_helper cryptd ehci_hcd sysimgblt xhci_hcd fb_sys_fops edac_core mei_me lpc_ich ses usbcore enclosure dca mfd_core ipmi_si mei i2c_i801 scsi_transport_sas usb_common ipmi_msghandler shpchp fjes wmi processor button acpi_pad btrfs xor raid6_pq sd_mod crc32c_intel megaraid_sas sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod md_mod autofs4 [1072141.444146] Supported: Yes [1072141.444149] CPU: 21 PID: 1 Comm: systemd Not tainted 4.4.121-92.80-default #1 [1072141.444150] Hardware name: LENOVO Lenovo System x3650 M5 -[5462P4U]- -[5462P4U]-/01GR451, BIOS -[TCE136H-2.70]- 06/13/2018 [1072141.444151] task: ffff880191bd0040 ti: ffff880191bd4000 task.ti: ffff880191bd4000 [1072141.444153] RIP: 0010:[<ffffffff815229f9>] [<ffffffff815229f9>] update_classid_sock+0x29/0x40 [1072141.444157] RSP: 0018:ffff880191bd7d58 EFLAGS: 00000286 [1072141.444158] RAX: ffff883b177cb7c0 RBX: 0000000000000000 RCX: 0000000000000000 [1072141.444159] RDX: 00000000000009c7 RSI: ffff880191bd7d5c RDI: ffff8822e29bb200 [1072141.444160] RBP: ffff883a72230980 R08: 0000000000000101 R09: 0000000000000000 [1072141.444161] R10: 0000000000000008 R11: f000000000000000 R12: ffffffff815229d0 [1072141.444162] R13: 0000000000000000 R14: ffff881fd0a47ac0 R15: ffff880191bd7f28 [1072141.444163] FS: 00007f3e2f1eb8c0(0000) GS:ffff882000340000(0000) knlGS:0000000000000000 [1072141.444164] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1072141.444165] CR2: 00007f3e2f200000 CR3: 0000001ffea4e000 CR4: 00000000001606f0 [1072141.444166] Stack: [1072141.444166] ffffffa800000246 00000000000009c7 ffffffff8121d583 ffff8818312a05c0 [1072141.444168] ffff8818312a1100 ffff880197c3b280 ffff881861422858 ffffffffffffffea [1072141.444170] ffffffff81522b1c ffffffff81d0ca20 ffff8817fa17b950 ffff883fdd8121e0 [1072141.444171] Call Trace: [1072141.444179] [<ffffffff8121d583>] iterate_fd+0x53/0x80 [1072141.444182] [<ffffffff81522b1c>] write_classid+0x4c/0x80 [1072141.444187] [<ffffffff8111328b>] cgroup_file_write+0x9b/0x100 [1072141.444193] [<ffffffff81278bcb>] kernfs_fop_write+0x11b/0x150 [1072141.444198] [<ffffffff81201566>] __vfs_write+0x26/0x100 [1072141.444201] [<ffffffff81201bed>] vfs_write+0x9d/0x190 [1072141.444203] [<ffffffff812028c2>] SyS_write+0x42/0xa0 [1072141.444207] [<ffffffff815f58c3>] entry_SYSCALL_64_fastpath+0x1e/0xca [1072141.445490] DWARF2 unwinder stuck at entry_SYSCALL_64_fastpath+0x1e/0xca If a cgroup has many tasks with many open file descriptors then we would end up in a large loop without any rescheduling point throught the operation. Add cond_resched once per task. Signed-off-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Michal Hocko
authored and
Greg Kroah-Hartman
commited |
48936133e3 | |
[ Upstream commit cb5c2e63948451d38c977685fffc06e23beb4517 ] When processing the mids for compounds we would only add credits based on the last successful mid in the compound which would leak credits and eventually triggering a re-connect. Fix this by splitting the mid processing part into two loops instead of one where the first loop just waits for all mids and then counts how many credits we were granted for the whole compound. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Ronnie Sahlberg
authored and
Greg Kroah-Hartman
commited |
c24f57c612 | |
[ Upstream commit 760eea43f8c6d48684f1f34b8a02fddc1456e849 ] The workqueue used for monitoring the hardware may run while the device is already suspended. Fix this by using the freezable system workqueue instead, cfr. commit 
Geert Uytterhoeven
authored and
Greg Kroah-Hartman
commited |
c016b6d3c9 | |
[ Upstream commit 697ee786f15d7b65c7f3045d45fe3a05d28e0911 ]
When testing bind/unbind on r8a7791/koelsch:
WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10
This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.
Fixes:
Geert Uytterhoeven
authored and
Greg Kroah-Hartman
commited |
509859e49b | |
[ Upstream commit a435ab4f80f983c53b4ca4f8c12b3ddd3ca17670 ] med_power_with_dipm causes my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q). Switching the LPM to max_performance fixes this issue. Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Diego Viola
authored and
Greg Kroah-Hartman
commited |
aa3bbb8d78 | |
[ Upstream commit a9911937e7d332761e8c4fcbc7ba0426bdc3956f ] When running in AP mode, ath10k sometimes suffers from TX credit starvation. The issue is hard to reproduce and shows up once in a few days, but has been repeatedly seen with QCA9882 and a large range of firmwares, including 10.2.4.70.67. Once the module is in this state, TX credits are never replenished, which results in "SWBA overrun" errors, as no beacons can be sent. Even worse, WMI commands run in a timeout while holding the conf mutex for three seconds each, making any further operations slow and the whole system unresponsive. The firmware/driver never recovers from that state automatically, and triggering TX flush or warm restarts won't work over WMI. So issue a hardware restart if a WMI command times out due to missing TX credits. This implies a connectivity outage of about 1.4s in AP mode, but brings back the interface and the whole system to a usable state. WMI command timeouts have not been seen in absent of this specific issue, so taking such drastic actions seems legitimate. Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Martin Willi
authored and
Greg Kroah-Hartman
commited |
27baa32c5e | |
[ Upstream commit 84f16fbb62384fb209cd35741d94eb00b5ca2746 ] RX SKBs are released in both wil6210 rmmod and RX handle. As there is no lock to protect the buffers DMA unmap, the SKB pointer in buff_arr is used to check if the buffer memory was already released. Setting wil->rx_buff_mgmt.buff_arr[buff_id].skb to NULL before the DMA memory unmap will prevent duplicate unmapping of the same memory. Move the buffer ID to the free list also in case the SKB is NULL. Signed-off-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Maya Erez
authored and
Greg Kroah-Hartman
commited |
b83452446e | |
[ Upstream commit 7fb94bd58dd6650a0158e68d414e185077d8b57a ] While VF2VF with RSS communication, RSS Type were wrongly recognized and RSS hash was not calculated as it should be. Packets was distributed on various queues by accident. This commit fixes that behaviour and causes proper RSS Type recognition. Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Sebastian Basierski
authored and
Greg Kroah-Hartman
commited |
ef172c7415 | |
[ Upstream commit 47b6f50077e68bcd544f657526dad4bfdce7e87d ] There seems to be a problem in the x540's internal switch wherein if SR-IOV mode is enabled and an offloaded IPsec packet is sent to a local VF, the packet is silently dropped. This might never be a problem as it is somewhat a corner case, but if someone happens to be using IPsec offload from the PF to a VF that just happens to get migrated to the local box, communication will mysteriously fail. Not good. A simple way to protect from this is to simply not allow any IPsec offloads for outgoing packets when num_vfs != 0. This doesn't help any offloads that were created before SR-IOV was enabled, but we'll get to that later. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Shannon Nelson
authored and
Greg Kroah-Hartman
commited |
d0530284dd | |
[ Upstream commit bfba223dcc4548632d8f3bfd15690a86d4c68504 ] Sometimes we have empty banks within the GPIO block. This commit allows proper handling of 0 width GPIO banks. We handle 0 width GPIO banks by incrementing the bank and number of GPIOs, but not initializing them. This will mean a call into the non-existent GPIOs will return an error. Also remove "GPIO registered" dev print. This information is misleading since the incremented banks and gpio_base do not reflect the actual GPIOs that get initialized. We leave this information out since it is already printed with dev_dbg. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Justin Chen
authored and
Greg Kroah-Hartman
commited |
545a030314 | |
[ Upstream commit 941ab4eb66c10bc5c7234e83a7a858b2806ed151 ] There is a bug in FW where the sequence control may be incorrect, and the driver overrides it with the value of the ieee80211 header. However, in BAR there is no sequence control in the header, which result with arbitrary sequence. This access to an unknown location is bad and it makes the logs very confusing - so fix it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Sara Sharon
authored and
Greg Kroah-Hartman
commited |
8ba36c16bc | |
[ Upstream commit 3348ef6a6a126706d6a73ed40c18d8033df72783 ]
If recvlength is less than MESSAGE_HEADER_LEN (4) we would end up
corrupting memory.
Fixes:
Dan Carpenter
authored and
Greg Kroah-Hartman
commited |
44e0f15b31 | |
[ Upstream commit baa8caf4ab7af2d9e84b566b99fe919a4e9e7562 ] During testing in ARM32 platforms, observed below kernel panic, as driver accessing data beyond the allocated memory while submitting URB to USB. Fix: Resolved this by specifying correct length by considering 64 bit alignment. so that, USB bus driver will access only allocated memory. Unit-test: Tested and confirm that driver bring up and scanning, connection and data transfer works fine with this fix. ...skipping... [ 25.389450] Unable to handle kernel paging request at virtual address 5aa11422 [ 25.403078] Internal error: Oops: 5 [#1] SMP ARM [ 25.407703] Modules linked in: rsi_usb [ 25.411473] CPU: 1 PID: 317 Comm: RX-Thread Not tainted 4.18.0-rc7 #1 [ 25.419221] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 25.425764] PC is at skb_release_data+0x90/0x168 [ 25.430393] LR is at skb_release_all+0x28/0x2c [ 25.434842] pc : [<807435b0>] lr : [<80742ba0>] psr: 200e0013 5aa1141e [ 25.464633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 25.477524] Process RX-Thread (pid: 317, stack limit = 0x(ptrval)) [ 25.483709] Stack: (0xedf69ed8 to 0xedf6a000) [ 25.569907] Backtrace: [ 25.572368] [<80743520>] (skb_release_data) from [<80742ba0>] (skb_release_all+0x28/0x2c) [ 25.580555] r9:7f00258c r8:00000001 r7:ee355000 r6:eddab0d0 r5:eddab000 r4:eddbb840 [ 25.588308] [<80742b78>] (skb_release_all) from [<807432cc>] (consume_skb+0x30/0x50) [ 25.596055] r5:eddab000 r4:eddbb840 [ 25.599648] [<8074329c>] (consume_skb) from [<7f00117c>] (rsi_usb_rx_thread+0x64/0x12c [rsi_usb]) [ 25.608524] r5:eddab000 r4:eddbb840 [ 25.612116] [<7f001118>] (rsi_usb_rx_thread [rsi_usb]) from [<80142750>] (kthread+0x11c/0x15c) [ 25.620735] r10:ee9ff9e0 r9:edcde3b8 r8:ee355000 r7:edf68000 r6:edd3a780 r5:00000000 [ 25.628567] r4:edcde380 [ 25.631110] [<80142634>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) [ 25.638336] Exception stack(0xedf69fb0 to 0xedf69ff8) [ 25.682929] ---[ end trace 8236a5496f5b5d3b ]--- Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Siva Rebbagondla
authored and
Greg Kroah-Hartman
commited |
14e0b9bba9 | |
[ Upstream commit 9b2fd48d36e25b9be9ddb8be8cc1eb263a1d1843 ]
Cleanup {tx,rx} and mcu queues if resume operation fails
Fixes:
Lorenzo Bianconi
authored and
Greg Kroah-Hartman
commited |
3041b096a3 | |
[ Upstream commit c309b158090d788e96ee597444965cb79b040484 ]
After changing to the needed page, actually write the value to the
register!
Fixes:
Andrew Lunn
authored and
Greg Kroah-Hartman
commited |
6436e7900c | |
[ Upstream commit 41dafea2af781d8e3ab8626d236b52e4172905a3 ]
There are only 128 entries in vf vlan table, if user has added
more than 128 vlan, fw will ignore it and disable the vf vlan
table. So when user deletes the vlan entry that has not been
set to vf vlan table, fw will return not found result and driver
treat that as error, which will cause vlan delete failed problem.
This patch fixes it by returning ok when fw returns not found
result.
Fixes:
Yunsheng Lin
authored and
Greg Kroah-Hartman
commited |
6797a427f8 | |
[ Upstream commit 3f8601f0f5716c4e63a9f215bbc581df42859d61 ]
When ping is runnig and user executes the loopback selftest, the
ping cmd will stop and exit.
This patch fixes it by using the hns3_nic_net_open/stop to offline
the netdev when doing loopback selftest.
Fixes:
Yunsheng Lin
authored and
Greg Kroah-Hartman
commited |
0e80397c86 | |
[ Upstream commit daaa8521760ee4d4e65f309c4c37b3a1e58c9d4e ]
When netdev is down, the stack will delete the vlan from
hardware including vlan0, which will cause problem when
doing loopback selftest when netdev is down.
This patch fixes it by always preserving vlan 0 in hardware,
because vlan 0 is defalut vlan, which should always be in
hardware.
Fixes:
Yunsheng Lin
authored and
Greg Kroah-Hartman
commited |
35aafd40b1 | |
[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ] If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice it looks like nonsense. The problem is fairly well described in commit 
Douglas Anderson
authored and
Greg Kroah-Hartman
commited |
e6ae1e7b0f | |
[ Upstream commit 0d5b476f8f57fcb06c45fe27681ac47254f63fd2 ] If you look at "pinconf-groups" in debugfs for ssbi-mpp you'll notice it looks like nonsense. The problem is fairly well described in commit
Douglas Anderson
authored and
Greg Kroah-Hartman
commited |
a87aba1525 | |
[ Upstream commit 1632936480a53d85ef3012cd9f290e247251cbb9 ]
When we don't have the iputils-debuginfo package installed, i.e. when we
don't have the DWARF information needed to resolve ping's samples, we
end up failing this 'perf test' entry:
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : Ok
# rpm -e iputils-debuginfo
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Fix it to accept "[unknown]" where the symbol + offset, when resolved,
is expected.
I think this will fail in the other arches as well, but since I can't
test now, I'm leaving s390x and ppc cases as-is.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
Arnaldo Carvalho de Melo
authored and
Greg Kroah-Hartman
commited |
e7af99165b | |
[ Upstream commit 9e7e6cabf371cc008cb2244a04c012b516753693 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/net/net_failover.c: In function 'net_failover_slave_unregister':
drivers/net/net_failover.c:598:35: warning:
variable 'primary_dev' set but not used [-Wunused-but-set-variable]
There should check the validity of 'slave_dev'.
Fixes:
YueHaibing
authored and
Greg Kroah-Hartman
commited |
f60d53ef57 | |
[ Upstream commit a9c676bc8fc58d00eea9836fb14ee43c0346416a ]
Edward Cree says:
In check_mem_access(), for the PTR_TO_CTX case, after check_ctx_access()
has supplied a reg_type, the other members of the register state are set
appropriately. Previously reg.range was set to 0, but as it is in a
union with reg.map_ptr, which is larger, upper bytes of the latter were
left in place. This then caused the memcmp() in regsafe() to fail,
preventing some branches from being pruned (and occasionally causing the
same program to take a varying number of processed insns on repeated
verifier runs).
Fix the instability by clearing bpf_reg_state in __mark_reg_[un]known()
Fixes:
Alexei Starovoitov
authored and
Greg Kroah-Hartman
commited |
e12da4273c | |
[ Upstream commit 89c68b102f13f123aaef22b292526d6b92501334 ]
It looks like we parse the drive strength setting here, but never
actually write it into the hardware to update it. Parse the setting and
then write it at the end of the pinconf setting function so that it
actually sticks in the hardware.
Fixes:
Stephen Boyd
authored and
Greg Kroah-Hartman
commited |
9906a9300d | |
[ Upstream commit 240714061c58e6b1abfb3322398a7634151c06cb ] Bay and Cherry Trail DSTDs represent a different set of devices depending on which OS the device think it is booting. One set of decices for Windows and another set of devices for Android which targets the Android-x86 Linux kernel fork (which e.g. used to have its own display driver instead of using the i915 driver). Which set of devices we are actually going to get is out of our control, this is controlled by the ACPI OSID variable, which gets either set through an EFI setup option, or sometimes is autodetected. So we need to support both. This commit adds support for the 80862286 and 808622C0 ACPI HIDs which we get for the first resp. second DMA controller on Cherry Trail devices when OSID is set to Android. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Hans de Goede
authored and
Greg Kroah-Hartman
commited |
fe68a585e9 | |
[ Upstream commit abf5feef3ff0cefade0c76be53b59e55fdd46093 ] There is a logical problem in spi-gpio with host just assigning a MOSI line and no MISO: this is interpreted as the host cannot do RX and the host is flagged with SPI_MASTER_NO_RX. This is wrong: since GPIO lines can switch direction, in 3WIRE operation the host will simply reverse the direction of the GPIO line and start reading from it, there is even code for doing this in the driver, but it went unnoticed because it was tested by using a master with 4 wires but a device using just 3 wires. Remove the offending flag. Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Linus Walleij
authored and
Greg Kroah-Hartman
commited |
74e8d28794 | |
[ Upstream commit 819319fc93461c07b9cdb3064f154bd8cfd48172 ] Make reuse_unused_kprobe() to return error code if it fails to reuse unused kprobe for optprobe instead of calling BUG_ON(). Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Masami Hiramatsu
authored and
Greg Kroah-Hartman
commited |
82b0f70fd3 | |
[ Upstream commit 0bf0f444b2c49241b2b39aa3cf210d7c95ef6c34 ] Rather than panic() when taking an undefined instruction exception from EL1, allow a hook to be registered in case we want to emulate the instruction, like we will for the SSBS PSTATE manipulation instructions. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Will Deacon
authored and
Greg Kroah-Hartman
commited |
313c940d15 |