If config_tether_ncm_regexs is configured, load it to
tetherableUsbRegexs if ncm is used for TETHERING_USB. Load it to
tetherableNcmRegexs if ncm is used for TETHERING_NCM.
Bug: 185649441
Test: atest TetheringTests
Change-Id: I0c542560bd04e8c0a6a78d632da5a00a34d9a3fa
Before this change, usb IpServer would be created if corresponding
interface is available even there is no enable tethering attempt. And
usb IpServer only be disabled when interface is removed. Usb tethering
could not be stopped if interface is always avaialbe.
After this change, usb IpServer would be enabled and disabled according
to ACTION_USB_STATE.
Bug: 185649441
Test: atest TetheringCoverageTests
atest MtsTetheringTestLatestSdk
atest CtsTetheringTest
Change-Id: I8375e3f998d677dc658370b2553facaec0d5ff7c
Apply their respective jarjar rules on tethering and general
connectivity tests, then merge both into the coverage tests suite.
This is necessary to ensure that classes covered by tests have names
matching classes used in code.
Also fix IpConnectivityLogTest to use the module utility instead of the
hidden BitUtils, as the test would fail after internal utils are
jarjared.
Bug: 187935317
Test: atest ConnectivityCoverageTests TetheringCoverageTests
Change-Id: Ib95b58dab93f7adebc445b662a6d15db1ce0e7c2
Allow stop TETHERING_NCM no matter ncm is used for TETHERING_USB or
TETHERING_NCM.
Add a test:
1. NCM is started for TETHERING_NCM
2. The config changes to use NCM for TETHERING_USB.
3. Then the config changes to use RNDIS for TETHERING_USB.
Also let some logs not only print in dumpsys, but also in logcat to
easiler debug unit test.
Bug: 185649441
Test: atest TetheringTests
Change-Id: Ia8d76a29646f36941cbb16cd68ae6887100ec8ec
markchienauthored and Mark Chiencommited 2021-06-28 02:59:33 +00:00
The test can't have TetheringManager as an argument to methods or a
field, otherwise the test runner will crash when scanning the class for
tests because TetheringManager did not exist in Q. Although
testFactoryReset is already skipped on Q, the test runner would fail
at initialization time, before starting the run.
Use CtsTetheringUtils instead. This ensures that TetheringManager does
not have method signatures or members that reference classes that do not
exist on Q, so the test runner can scan the class successfully before
starting the run.
Bug: 188851796
Test: atest ConnectivityManagerTest on Q
Change-Id: I87488d0f23628a1ef2d7af0242513fcc5401d598
Data warning is not supported on R, and the notifyWarningOrLimitReached
callback also only exists in S.
Bug: 182962001
Test: atest OffloadControllerTest
Change-Id: I4914240967bba341f16e505acd29b80b90ab8569
This is supported by:
1. Utilize the new API from both NetworkStatsProvider
and IOffloadControl to send data warning quota to hardware.
And pass the warning reached notification back to NPMS.
2. Disable software solution introduced in R release for
V1.1+ hardware, since now we can fully offload data warning
and limit notification to hardware.
Test: atest TetheringTests
Fix: 149467454
Merged-In: Ie49461694d77ab7f25a549433b01b5b0167bd489
Change-Id: Ie49461694d77ab7f25a549433b01b5b0167bd489
(cherry-picked from ag/13981692)
junyulaiauthored and Junyu Laicommited 2021-06-24 08:33:28 +00:00
This is a no-op change that just adapt new API from
NetworkStatsProvider to get warning and limit bytes at the same
time. This change also stores them locally for subsequent
patches to set warning bytes to hardware.
Test: Will be included in the subsequent patch.
Bug: 149467454
Merged-In: Iec01cb01fd1ce481ce0bd736762baddde1e38084
Change-Id: Iec01cb01fd1ce481ce0bd736762baddde1e38084
(cherry-picked from ag/13981691)
junyulaiauthored and Junyu Laicommited 2021-06-24 08:33:28 +00:00
This is a no-op change that redirect both V1.0 and V1.1 callback
events to the same handling function. Since the V1.1 callback
is extended from V1.0 callback, we can safely use V1.1
callback for both V1.0 and V1.1 control.
The change also provides interface for subsequent
OffloadController changes to set warning and limit at the
same time.
Test: atest TetheringTests
Bug: 149467454
Merged-In: I6505a04de8c57357dd1fa9ce898c13395e497816
Change-Id: I6505a04de8c57357dd1fa9ce898c13395e497816
(cherry-picked from ag/13973147)
junyulaiauthored and Junyu Laicommited 2021-06-24 08:33:28 +00:00
Remove NetworkCallbackInfo to use Handler directly, and separate
registerSystemDefaultNetworkCallback from requestNetwork.
Also verify that requestNetwork is only used with a default-like network
request on R, as S should be using registerSystemDefaultNetworkCallback.
Test: atest TetheringTests
Bug: 189581241
Change-Id: If6b9124b2d795b9db1e85256c694d0120c852542
The stable connectivity shims are updated to now contain S API, so
tethering tests that assumed that compatibility R behavior was used need
to be updated.
To avoid such failures Tethering tests should have a test target using
updated shims (TetheringNextTests), but this was not done in S
timeframe.
Bug: 189581241
Test: atest TetheringTests
Merged-In: Ibc04e64a1e9d82b67aff10d1a6d77f9e6b1bbdfb
Change-Id: Ibc04e64a1e9d82b67aff10d1a6d77f9e6b1bbdfb
Needed because the BPF maps offloads IPv4 traffic. The kernel can't
trace the offloaded traffic to keep the conntrack entry.
Bug: 190783768
Test: atest TetheringCoverageTests
Change-Id: Idbcf686c9b2124b192944156ac5111be741744fb
The condition for deleting IPv4 forwarding rules.
1. When the tethering client has gone, deletes the client and its
rules.
2. When the upstream has gone, deletes all rules.
3. When the upstream has changed, deletes all rules.
Test: atest TetheringCoverageTests and check IPv4 offload rules
via dumpsys tethering in the following test cases.
Bug: 190783768
Test cases:
a. Loss upstream interface while tethering
1. Enable WIFI tethering
2. Disable upstream interface
3. Check the rules are removed.
b. Loss downstream interfaces while tethering
1. Enable WIFI tethering
2. Enable BT tethering
3. Disable BT tethering
4. Check the BT tether rules are removed.
5. Disable WIFI tethering
6. Check the WIFI tether rules are removed.
c. Switch upstream interface while tethering
1. Enable WIFI tethering
2. Enable BT tethering
3. Switch upstream interface from cellular to wifi.
4. Check all rules are removed.
d. Enable NAT failure (manual)
Log:
The rule deletion in each case.
- IpServer#stopIPv4: case b and case d.
- BpfCoordinator#updateUpstreamNetworkState: case a and case c.
Test case a
06-23 09:58:59.245 [...] Tethering: [BpfCoordinator]
updateUpstreamNetworkState tetherOffloadRule4Clear wlan2
Test case b
06-07 22:17:51.886 [..] Tethering: [bt-pan] cleanupUpstream bt-pan
06-07 22:17:51.888 [..] Tethering: [bt-pan] stopIPv4 bt-pan
06-07 22:18:23.769 [..] Tethering: [wlan2] cleanupUpstream wlan2
06-07 22:18:23.772 [..] Tethering: [wlan2] stopIPv4 wlan2
Test case c
06-08 11:11:48.277 [..] Tethering: [BpfCoordinator]
updateUpstreamNetworkState tetherOffloadRule4Clear bt-pan
06-08 11:11:48.396 [..] Tethering: [BpfCoordinator]
updateUpstreamNetworkState tetherOffloadRule4Clear wlan2
06-08 11:11:48.579 [..] Tethering: [wlan2] cleanupUpstreamInterface
wlan2
06-08 11:11:48.808 [..] Tethering: [bt-pan] cleanupUpstreamInterface
bt-pan
Enabling NAT failure
06-08 13:04:18.117 [..] Tethering: [wlan2] Exception enabling NAT [..]
06-08 13:04:18.234 [..] Tethering: [wlan2] cleanupUpstream wlan2
06-08 13:04:18.246 [..] Tethering: [wlan2] stopIPv4 wlan2
Change-Id: Id505a3deb277bbe0f44403234d8ca8bbf01eec80
Adding the configuration to decide using rndis or ncm for usb tethering.
If ncm is configured for TETHEIRNG_USB, then TETHERING_NCM is not
available.
Bug: 162920185
Test: atest TetheringTests
manul testing usb tethering
Change-Id: Ifc7eee2457a950a0e2d1c3cc89a3373a7ad23c9c
The coverage tests will allow measuring code coverage for all
Connectivity+Tethering code.
This is a combination of the current TetheringCoverageTests, and
FrameworksNetTests.
Adding min_sdk_version to the test prevents it from using deprecated
IoUtils utilities. Replace it with the non-deprecated alternative.
Test: atest ConnectivityCoverageTests
Change-Id: I5366e1cc9cd6ddb41f24718246381cc2b1cc1383
The test will currently fail if it is run in a package that has
ACCESS_NETWORK_STATE. Add utilities to mock permissions, and mock the
ACCESS_NETWORK_STATE permission to be denied.
Bug: 187935317
Test: atest TetheringServiceTest
Change-Id: I8df5f2ac21bf0314098e8c2e5ba583676ae8ab38
The stable connectivity shims are updated to now contain S API, so
tethering tests that assumed that compatibility R behavior was used need
to be updated.
To avoid such failures Tethering tests should have a test target using
updated shims (TetheringNextTests), but this was not done in S
timeframe.
Ignore-AOSP-First: topic needs differences in AOSP
Bug: 189581241
Test: atest TetheringTests
Change-Id: Ibc04e64a1e9d82b67aff10d1a6d77f9e6b1bbdfb
startTrackDefaultNetwork was allowed to called multiple times
before even though there is no one actually do it. However,
in the TetheringTest#verifyDefaultNetworkRequestFiled, a
manual invocation is used to ensure that function supports
multiple entrance.
But with aosp/1697371, startTrackDefaultNetwork is no longer
allowed to be called multiple times, it would lead to log.wtf
and crash system in eng build.
Since the manual invocation of startTrackDefaultNetwork is not
realistic and no longer valid anymore, remove the invocation
that caused the trouble.
Test: atest TetheringCoverageTests
Bug: 188613493
Merged-In: I61f6088783d521fd17ae1e87370842b4239fbe75
Change-Id: I61f6088783d521fd17ae1e87370842b4239fbe75
(cherry-picked from aosp/1711433)
junyulaiauthored and Junyu Laicommited 2021-06-09 01:57:37 +00:00
The existing isWifiTetheringSupported only check if tethering side
supports wifi tethering or not but not wifi side. A expected
behavior should include both of them, so add the wifi side check
into the helper function. Also update in the existing caller side
due to a new parameter added.
Bug: 186061922
Test: atest MtsTetheringTestLatestSdk
Megred-In: Id69ac1d30ab2bbf23e870193335b139f54672636
Change-Id: Id69ac1d30ab2bbf23e870193335b139f54672636
Ignore-AOSP-First: cherry-pick
The existing isWifiTetheringSupported only check if tethering side
supports wifi tethering or not but not wifi side. A expected
behavior should include both of them, so add the wifi side check
into the helper function. Also update in the existing caller side
due to a new parameter added.
Bug: 186061922
Test: atest MtsTetheringTestLatestSdk
Change-Id: Id69ac1d30ab2bbf23e870193335b139f54672636
The old callback only report interface list, new callback could provide
the mapping of interface and type. Replace old callback usage in cts
with new callback and check whether old callback could get the correct
interface list by comparing the result between old and new callback.
Bug: 162920185
Bug: 152203943
Test: atest CtsTetheringTest on S
atest CtsTetheringTestLatestSdk on R
atest MtsTetheringTestLatestSdk on S and R
Merged-In: I2a0b8c43fb340c3eaed7f0f90464199222a24280
Change-Id: I2a0b8c43fb340c3eaed7f0f90464199222a24280
markchienauthored and Chiachang Wangcommited 2021-06-01 14:36:09 +08:00
Before this change, tethering always report a list of tethered
interfaces and the caller need to use each tethering type's interface
regex to matching tethered list to manual implement the mapping of
tethering type and interface. This change allow caller to get rid of
tethering interface regex.
Bug: 162920185
Bug: 152203943
Test: atest CtsTetheringTest on S
Merged-In: I91bcccd676d109c1b974497ac29bd366a41b8899
Change-Id: I91bcccd676d109c1b974497ac29bd366a41b8899
markchienauthored and Chiachang Wangcommited 2021-06-01 14:35:39 +08:00
Lorenzo Colitti
authored and
Automerger Merge Worker
commited 
Gerrit Code Review
commited 
markchien
commited 
Remi NGUYEN VAN
authored and
Treehugger Robot
authored and
Nucca Chen
authored and
junyulai
authored and
Chiachang Wang
commited