- Each network preference has been assigned a priority value so
that netd can know which uid range rule has higher priority. So
remove the restriction that all network preferences are
exclusive.
- Add priority check when getting request for uid.
Bug: 171872461
Test: atest FrameworksNetTests
Ignore-AOSP-First: Needs cherry-picks
Change-Id: I6912db753c8b4a194aa7af92b01ca6dcfec10d8b
Replace network[Add|Remove]UidRanges to
network[Add|Remove]UidRangesParcel. The new methods are passing
NativeUidRangeConfig which contains priority value for each uid
range rules.
Bug: 171872461
Test: atest FrameworksNetTests
Test: atest HostsideVpnTests
(cherry-pick from ag/14911836)
Merged-In: I08bbdbcb8450b08e6208fa730137348550f9e3d2
Change-Id: I08bbdbcb8450b08e6208fa730137348550f9e3d2
paulhuauthored and Paul Hucommited 2021-07-07 03:06:32 +00:00
qtaguid is long dead - test is thus a no-op
New test logs:
Running Tests...
x86 CtsNativeNetTestCases
-------------------------
CtsNativeNetTestCases (1 Test)
[1/1] BpfTest#bpfStructSizeTest: PASSED (0ms)
Summary
-------
x86 CtsNativeNetTestCases: Passed: 1, Failed: 0, Ignored: 0, Assumption Failed: 0,
All tests passed!
Test: atest CtsNativeNetTestCases, TreeHugger
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Change-Id: I9ff784dbfda0ce981904d53eacb7bc831cbe81da
Maciej Żenczykowskicommited 2021-07-06 22:15:44 +00:00
This test is required to ensure that the system is compatible
with future updates of the tethering mainline module, which
updates BPF .o files on device.
This test must already be passing on OEM devices because otherwise
the offload.o program in the Tethering mainline module would bootloop
the device.
Bug: 190519702
Test: atest CtsNativeNetTestCases, TreeHugger
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Original-Change: https://android-review.googlesource.com/1756440
Merged-In: Ibaedb8fcb28591ffba1506514f2305d55712a26b
Change-Id: Ibaedb8fcb28591ffba1506514f2305d55712a26b
Treehugger Robotauthored and Maciej Zenczykowskicommited 2021-07-06 21:13:24 +00:00
This test is required to ensure that the system is compatible
with future updates of the tethering mainline module, which
updates BPF .o files on device.
This test must already be passing on OEM devices because otherwise
the offload.o program in the Tethering mainline module would bootloop
the device.
Bug: 190519702
Test: atest CtsNativeNetTestCases, TreeHugger
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Change-Id: Ibaedb8fcb28591ffba1506514f2305d55712a26b
Maciej Żenczykowskicommited 2021-07-06 02:50:47 -07:00
Connect can error with BUSY if the framework is busy when connect is
called. Add retries so that if this happens, the connection can succeed
after the framework stops being busy.
Also log the level of scan results when several configurations are
available, and clarify the legacy broadcast assert.
Bug: 188077861
Test: atest CtsNetTestCases
Change-Id: I99ce72bd2604489cb419ea9984643b6985728461
The internal structure backing getAllNetworks is updated after
invoking lost callbacks, so the test needs to wait for the handler
to be idle before calling getAllNetworks.
Also avoid assertions in finally clauses, as it causes confusing
error messages.
Bug: 185081944
Change-Id: I8ad5ab45a3e65b0031672e6f594b1a6d6ad5abcb
Test: atest ConnectivityServiceTest
The test relied on waitForIdle to ensure diagnostics callbacks were called,
but as this may require several iterations in the handler queue, this makes
the test unreliable.
Use mockito timeouts on the verify() calls instead.
Bug: 192651465
Change-Id: Iae1704af7ae3649eae301c6aee223ac753629d55
Test: atest ConnectivityServiceTest
If config_tether_ncm_regexs is configured, load it to
tetherableUsbRegexs if ncm is used for TETHERING_USB. Load it to
tetherableNcmRegexs if ncm is used for TETHERING_NCM.
Bug: 185649441
Test: atest TetheringTests
Original-Change: https://android-review.googlesource.com/1755176
Merged-In: I0c542560bd04e8c0a6a78d632da5a00a34d9a3fa
Change-Id: I0c542560bd04e8c0a6a78d632da5a00a34d9a3fa
Lorenzo Colittiauthored and Mark Chiencommited 2021-07-06 04:32:35 +00:00
Before this change, usb IpServer would be created if corresponding
interface is available even there is no enable tethering attempt. And
usb IpServer only be disabled when interface is removed. Usb tethering
could not be stopped if interface is always avaialbe.
After this change, usb IpServer would be enabled and disabled according
to ACTION_USB_STATE.
Bug: 185649441
Test: atest TetheringCoverageTests
atest MtsTetheringTestLatestSdk
atest CtsTetheringTest
Original-Change: https://android-review.googlesource.com/1731453
Merged-In: I8375e3f998d677dc658370b2553facaec0d5ff7c
Change-Id: I8375e3f998d677dc658370b2553facaec0d5ff7c
Lorenzo Colittiauthored and Mark Chiencommited 2021-07-06 04:22:21 +00:00
* changes:
Apply jarjar rules on coverage tests
Re-skip connectivity unit tests before S
Move ConnectivityCoverageTests to general-tests
Fix ConnectivityManagerTest initialization on Q
Move test_mainline_modules to AndroidTest.xml
Add ConnectivityCoverageTests to postsubmit
Add connectivity coverage tests
Make tests compatible with mockito-extended
Fix KeepalivePacketDataUtilTest crash on eng build
Update connectivity TEST_MAPPING
Address a TODO to use WifiManager#connect to reconnect wifi, instead of
WifiManager#reconnect. #connect also clears the BSSID denylist; that
list has caused flakyness due to tests that cause the network not to
validate such as captive portal or invalid private DNS behavior tests,
causing wifi to ignore the access point in reconnect attempts.
Bug: 188077861
Test: atest CtsNetTestCasesLatestSdk
Change-Id: I5a11a802db8a4881c161e6038c1c183d2ac23a05
If config_tether_ncm_regexs is configured, load it to
tetherableUsbRegexs if ncm is used for TETHERING_USB. Load it to
tetherableNcmRegexs if ncm is used for TETHERING_NCM.
Bug: 185649441
Test: atest TetheringTests
Change-Id: I0c542560bd04e8c0a6a78d632da5a00a34d9a3fa
Before this change, usb IpServer would be created if corresponding
interface is available even there is no enable tethering attempt. And
usb IpServer only be disabled when interface is removed. Usb tethering
could not be stopped if interface is always avaialbe.
After this change, usb IpServer would be enabled and disabled according
to ACTION_USB_STATE.
Bug: 185649441
Test: atest TetheringCoverageTests
atest MtsTetheringTestLatestSdk
atest CtsTetheringTest
Change-Id: I8375e3f998d677dc658370b2553facaec0d5ff7c
Apply their respective jarjar rules on tethering and general
connectivity tests, then merge both into the coverage tests suite.
This is necessary to ensure that classes covered by tests have names
matching classes used in code.
Also fix IpConnectivityLogTest to use the module utility instead of the
hidden BitUtils, as the test would fail after internal utils are
jarjared.
Bug: 187935317
Test: atest ConnectivityCoverageTests TetheringCoverageTests
Original-Change: https://android-review.googlesource.com/1749680
Merged-In: Ib95b58dab93f7adebc445b662a6d15db1ce0e7c2
Change-Id: Ib95b58dab93f7adebc445b662a6d15db1ce0e7c2
Paul Hu
authored and
Automerger Merge Worker
commited 
Android (Google) Code Review
commited 
Treehugger Robot
authored and
Gerrit Code Review
commited 
Remi NGUYEN VAN
authored and
Maciej Żenczykowski
authored and
Lorenzo Colitti
authored and
Mark Chien
commited 
Junyu Lai
authored and