Linus Torvalds
b0f85fa11a
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next ...
Pull networking updates from David Miller:
Changes of note:
1) Allow to schedule ICMP packets in IPVS, from Alex Gartrell.
2) Provide FIB table ID in ipv4 route dumps just as ipv6 does, from
David Ahern.
3) Allow the user to ask for the statistics to be filtered out of
ipv4/ipv6 address netlink dumps. From Sowmini Varadhan.
4) More work to pass the network namespace context around deep into
various packet path APIs, starting with the netfilter hooks. From
Eric W Biederman.
5) Add layer 2 TX/RX checksum offloading to qeth driver, from Thomas
Richter.
6) Use usec resolution for SYN/ACK RTTs in TCP, from Yuchung Cheng.
7) Support Very High Throughput in wireless MESH code, from Bob
Copeland.
8) Allow setting the ageing_time in switchdev/rocker. From Scott
Feldman.
9) Properly autoload L2TP type modules, from Stephen Hemminger.
10) Fix and enable offload features by default in 8139cp driver, from
David Woodhouse.
11) Support both ipv4 and ipv6 sockets in a single vxlan device, from
Jiri Benc.
12) Fix CWND limiting of thin streams in TCP, from Bendik Rønning
Opstad.
13) Fix IPSEC flowcache overflows on large systems, from Steffen
Klassert.
14) Convert bridging to track VLANs using rhashtable entries rather than
a bitmap. From Nikolay Aleksandrov.
15) Make TCP listener handling completely lockless, this is a major
accomplishment. Incoming request sockets now live in the
established hash table just like any other socket too.
From Eric Dumazet.
15) Provide more bridging attributes to netlink, from Nikolay
Aleksandrov.
16) Use hash based algorithm for ipv4 multipath routing, this was very
long overdue. From Peter Nørlund.
17) Several y2038 cures, mostly avoiding timespec. From Arnd Bergmann.
18) Allow non-root execution of EBPF programs, from Alexei Starovoitov.
19) Support SO_INCOMING_CPU as setsockopt, from Eric Dumazet. This
influences the port binding selection logic used by SO_REUSEPORT.
20) Add ipv6 support to VRF, from David Ahern.
21) Add support for Mellanox Spectrum switch ASIC, from Jiri Pirko.
22) Add rtl8xxxu Realtek wireless driver, from Jes Sorensen.
23) Implement RACK loss recovery in TCP, from Yuchung Cheng.
24) Support multipath routes in MPLS, from Roopa Prabhu.
25) Fix POLLOUT notification for listening sockets in AF_UNIX, from Eric
Dumazet.
26) Add new QED Qlogic river, from Yuval Mintz, Manish Chopra, and
Sudarsana Kalluru.
27) Don't fetch timestamps on AF_UNIX sockets, from Hannes Frederic
Sowa.
28) Support ipv6 geneve tunnels, from John W Linville.
29) Add flood control support to switchdev layer, from Ido Schimmel.
30) Fix CHECKSUM_PARTIAL handling of potentially fragmented frames, from
Hannes Frederic Sowa.
31) Support persistent maps and progs in bpf, from Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1790 commits)
sh_eth: use DMA barriers
switchdev: respect SKIP_EOPNOTSUPP flag in case there is no recursion
net: sched: kill dead code in sch_choke.c
irda: Delete an unnecessary check before the function call "irlmp_unregister_service"
net: dsa: mv88e6xxx: include DSA ports in VLANs
net: dsa: mv88e6xxx: disable SA learning for DSA and CPU ports
net/core: fix for_each_netdev_feature
vlan: Invoke driver vlan hooks only if device is present
arcnet/com20020: add LEDS_CLASS dependency
bpf, verifier: annotate verbose printer with __printf
dp83640: Only wait for timestamps for packets with timestamping enabled.
ptp: Change ptp_class to a proper bitmask
dp83640: Prune rx timestamp list before reading from it
dp83640: Delay scheduled work.
dp83640: Include hash in timestamp/packet matching
ipv6: fix tunnel error handling
net/mlx5e: Fix LSO vlan insertion
net/mlx5e: Re-eanble client vlan TX acceleration
net/mlx5e: Return error in case mlx5e_set_features() fails
net/mlx5e: Don't allow more than max supported channels
...
2015-11-04 09:41:05 -08:00
iio:dac: Add support for the ad5449
2012-10-19 18:46:51 +01:00
staging:iio:ad7291: Move out of staging
2014-07-08 21:17:30 +01:00
staging:iio: Move the ad7298 driver out of staging
2012-11-19 22:22:15 +00:00
iio:dac: Add support for the AD7303
2013-06-11 20:25:58 +01:00
staging:iio: Move ad7793 driver out of staging
2012-11-30 12:57:08 +00:00
staging:iio: Move the ad7887 driver out of staging
2012-11-05 20:39:54 +00:00
ASoC: Add ADAU1381/ADAU1781 audio CODEC support
2014-05-27 20:54:51 +01:00
ASoC: Add ADAU1977 CODEC driver
2014-02-19 13:36:15 +09:00
hwmon: (ads7828) driver cleanup
2012-12-05 10:55:54 -08:00
ARM: ux500: move PM-related PRCMU functions to machine
2013-04-08 13:57:53 +02:00
ARM: imx: remove header file mach/irqs.h
2012-10-15 10:05:43 +08:00
ASoC: Samsung: Add quirk for internal DMA
2014-11-07 10:38:17 +00:00
ASoC: s3c24xx: Remove invalid file reference
2014-02-25 21:29:31 +09:00
ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h
2013-12-30 11:50:16 +00:00
ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion
2014-01-07 15:36:09 +00:00
misc: (at24) move header to linux/platform_data/
2013-09-30 06:02:34 +02:00
iio: adc: at91_adc: Add support for touchscreens without TSMR
2014-05-07 18:28:40 +02:00
ata: pata_samsung_cf: removes s5pc100 related ata codes
2014-06-30 10:48:08 -04:00
can: at91: remove at91_can_data
2015-10-13 17:42:35 +02:00
Input: atmel_mxt_ts - use deep sleep mode when stopped
2015-08-04 17:03:52 -07:00
net: bcmgenet: enable driver to work without a device tree
2014-12-08 20:26:59 -05:00
backlight: Add ROHM BD6107 backlight driver
2013-07-16 13:01:19 +09:00
Input: bfin_rotary - move pin lists into into platform data
2015-02-15 16:06:27 -08:00
brcmfmac: abstract tx packet processing functions
2013-08-15 16:07:55 -04:00
staging/bluetooth: Add hci_h4p driver
2014-02-07 10:13:53 -08:00
[media] V4L2: mx3_camera: add support for asynchronous subdevice registration
2013-08-18 09:06:37 -03:00
[media] V4L2: soc_camera: Renesas R-Car VIN driver
2013-08-18 09:01:10 -03:00
ARM: integrator: switch to fetch clocks from device tree
2014-02-13 11:20:42 +01:00
ACPI / LPSS: register clock device for Lynxpoint DMA properly
2013-05-14 10:23:58 +05:30
clk/ARM: move Ux500 PRCC bases to the device tree
2015-08-24 16:49:14 -07:00
media: coda: use genalloc API
2013-04-29 18:28:13 -07:00
cpuidle: exynos: add coupled cpuidle support for exynos4210
2015-01-30 08:39:15 +09:00
ARM: AT91SAM9G45: same platform data structure for all crypto peripherals
2013-03-10 16:46:41 +08:00
ARM: plat-nomadik: move DMA40 header to <linux/platform_data>
2012-11-05 09:55:32 +01:00
Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
2013-06-30 21:24:21 -07:00
ASoC: davinci-mcasp: Rename platform data struct
2014-02-03 18:26:59 +00:00
Thermal: Add ST-Ericsson DB8500 thermal driver.
2012-11-15 20:50:34 +08:00
dmaengine: at_hdmac: extend hardware handshaking interface identification
2013-07-05 11:40:29 +05:30
dma: coh901318: create a proper platform data file
2013-01-07 17:35:57 +01:00
dmaengine: dw: define DW_DMA_MAX_NR_MASTERS
2015-02-04 22:39:44 -08:00
dmaengine: append hsu DMA driver
2015-03-07 03:23:02 +01:00
dmaengine: imx-sdma: Add support for version 3 firmware
2015-03-18 13:53:33 +05:30
dmaengine: imx-sdma: Add a new DMATYPE for SAI
2014-11-17 13:50:43 +05:30
dma: mmp_tdma: Fix build for ARM64
2015-02-03 17:47:35 -08:00
dma: mv_xor: Cleanup in dma-mv_xor.h header
2014-01-13 13:30:31 +05:30
dma: add driver for R-Car HPB-DMAC
2013-09-02 17:35:55 +05:30
ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
2013-10-21 05:32:48 +09:00
dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
2013-06-04 11:12:11 +02:00
ARM: OMAP: Add platform data header for DMTIMERs
2012-11-16 10:35:08 -06:00
Input: drv260x - add TI drv260x haptics driver
2014-08-19 22:19:28 -07:00
usb: dwc3: omap: remove platform data associated with dwc3-omap
2013-03-18 11:16:38 +02:00
ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue
2014-07-28 17:03:13 +05:30
spi: new controller driver for efm32 SoCs
2013-08-09 17:32:57 +01:00
nand: omap2: Remove horrible ifdefs to fix module probe
2014-09-22 11:37:51 -07:00
memory: emif: Handle devices which are not rated for >85C
2013-03-25 13:18:12 -07:00
net: Cleanup in eth-netx.h
2014-01-02 03:30:35 -05:00
Add support for GMT G762/G763 PWM fan controllers
2013-06-27 10:31:42 -07:00
MIPS: ath79: Add OF support to the GPIO driver
2015-06-21 21:54:09 +02:00
gpio: remove obsolete tnetv107x driver
2014-03-05 10:44:44 +08:00
GPIO: gpio-dwapb: Enable platform driver binding to MFD driver
2014-09-23 17:51:37 +02:00
ARM: lpc32xx: move custom GPIO header
2013-12-03 11:26:06 +01:00
gpio: omap: Allow building as a loadable module
2015-05-06 15:23:03 +02:00
gpio-rcar: Add RCAR_GP_PIN macro
2013-06-04 21:03:56 +09:00
gpio: add TS-5500 DIO blocks support
2012-12-10 11:23:25 +01:00
backlight: Add GPIO-based backlight driver
2013-07-16 13:01:05 +09:00
ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin
2015-03-27 12:19:37 +01:00
hwmon: (s3c) Trivial cleanup in hwmon-s3c.h
2014-01-14 21:36:52 -08:00
i2c: i2c-cbus-gpio: introduce driver
2012-11-19 09:57:16 +01:00
i2c: davinci: use ICPFUNC to toggle I2C as gpio for bus recovery
2015-04-10 17:57:28 +02:00
i2c: designware: add support of platform data to set I2C mode
2014-09-29 22:41:17 +02:00
i2c: mux: Add register-based mux i2c-mux-reg
2015-08-24 14:05:18 +02:00
i2c: s3c2410: Trivial cleanup in header file
2014-03-10 17:32:28 +01:00
watchdog: add Intel MID watchdog driver support
2014-06-10 21:48:16 +02:00
Invensense MPU6050 Device Driver.
2013-02-10 17:42:43 +00:00
iommu/omap: Remove platform data da_start and da_end fields
2014-07-29 12:39:56 +02:00
arm: sa1100: move irda header to linux/platform_data
2014-12-30 18:44:07 -05:00
irqchip: intc-irqpin: GPL header for platform data
2013-03-18 21:26:06 +09:00
regulator: isl9305: Add Intersil ISL9305/H driver
2014-09-06 12:43:05 +01:00
mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform data
2015-08-11 15:03:21 +01:00
Input: update email-id of Rajeev Kumar
2015-05-22 10:59:55 -07:00
Input: keypad-ep93xx - cleanup header file
2013-12-27 17:20:21 -08:00
Input: keypad-omap - cleanup header file
2013-12-27 17:20:22 -08:00
Input: pxa27x-keypad - use matrix_keymap for matrix keys
2013-06-18 22:56:51 -07:00
leds: netxbig: add device tree binding
2015-11-03 08:59:25 +01:00
leds: leds-ns2: move LED modes mapping outside of the driver
2015-08-28 14:06:06 +02:00
leds: lp55xx: handle enable pin in driver
2013-10-25 10:13:25 -07:00
ARM: OMAP: Move plat/led.h to include/linux/platform_data
2012-10-17 12:03:18 -07:00
leds-pca9633: Rename to leds-pca963x
2013-08-26 17:22:14 -07:00
leds: leds-s3c24xx: Trivial cleanup in header file
2014-02-27 09:57:11 -08:00
backlight: lm3630: apply chip revision
2013-11-13 12:09:15 +09:00
backlight: lp855x: Use private data for regulator control
2015-08-25 08:40:44 +01:00
regulator: lp8755: new driver for LP8755
2012-12-24 16:32:34 +00:00
backlight: Add Sanyo LV5207LP backlight driver
2013-07-16 13:01:10 +09:00
net/macb: convert to kernel doc
2015-07-27 01:10:29 -07:00
ARM: OMAP2+: add user and fifo info to mailbox platform data
2013-06-11 11:41:30 -05:00
hwmon: (max197) add include guard
2014-01-14 21:36:53 -08:00
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
2014-05-29 11:19:30 -07:00
hwmon: Driver for Maxim MAX6697 and compatibles
2013-02-06 09:57:56 -08:00
net: mdio-gpio: move platform data header
2015-10-21 19:50:44 -07:00
mfd: Cleanup mfd-mcp-sa11x0.h header
2014-01-21 08:28:59 +00:00
NFC: Initial support for Inside Secure microread
2013-02-03 20:37:42 +01:00
mmc: atmel-mci: move mach header to platform_data
2014-11-10 12:40:37 +01:00
ARM: davinci: mmc: derive version information from device name
2013-04-03 09:42:16 +05:30
mmc: sdhci-esdhc-imx: add tuning-step setting support
2015-08-27 14:50:50 +02:00
mmc: mvsdio: Cleanup mmc-mvsdio.h header
2014-02-25 15:43:23 -05:00
mmc: omap_hsmmc: remove prepare/complete system suspend support.
2015-01-19 09:56:08 +01:00
ARM: pxa: propagate errors from regulator_enable() to pxamci
2013-07-23 12:15:15 -07:00
mmc: sdhci-s3c: remove platform dependencies
2013-04-19 13:51:23 +02:00
ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif
2014-02-23 20:33:18 +05:30
nand: omap2: Add support for flash-based bad block table
2014-09-17 01:02:48 -07:00
mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
2014-05-21 12:55:09 -07:00
mtd: nand: s3c2410: Trivial cleanup in header file
2014-03-10 22:42:26 -07:00
mtd: omap2: Cleanup header files
2014-01-11 11:39:18 -08:00
mtd: orion: Cleanup mtd-orion_nand.h header
2014-01-11 11:39:23 -08:00
usb: mv_usb: remove clock name from pdata
2013-04-02 11:42:47 +03:00
cw1200: rename the cw1200 platform definition header
2013-06-03 15:54:56 -04:00
NFC: nfcmrvl: add i2c driver
2015-10-27 04:21:14 +01:00
hwmon: (ntc_thermistor) Add support for ncpXXwf104
2015-05-31 22:58:36 -07:00
NFC: nxp-nci: Add support for NXP NCI chips
2015-03-26 11:07:50 +01:00
ASoC: omap-twl4030: Update the header file to support more boards
2012-12-07 12:54:31 +09:00
ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer
2012-10-29 20:49:44 -06:00
staging: drm/omap: add support for ARCH_MULTIPLATFORM
2012-10-30 11:10:00 -07:00
gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-29 12:33:52 -07:00
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.
2013-09-19 14:37:27 +02:00
pinctrl: single: Add support for auxdata
2013-10-10 15:30:47 -07:00
Input: pixcir_i2c_ts - switch the device over to gpiod
2015-07-11 17:28:08 -07:00
nfc: Fix FSF address in file headers
2013-12-11 10:56:21 -05:00
ARM: move udc_pxa2xx.h to linux/platform_data
2012-11-16 11:35:30 +00:00
mmc: sdhci-pxav3: Move private driver data to driver source
2014-11-10 12:40:31 +01:00
Input: add regulator haptic driver
2014-12-21 18:59:20 -08:00
remoteproc/omap: fix a sparse warning
2013-07-01 15:30:51 +03:00
ARM defconfigs: add missing inclusions of linux/platform_device.h
2013-02-14 15:14:32 -08:00
ARM: move serial_sa1100.h header file to linux/platform_data
2012-11-16 11:35:29 +00:00
serial: imx: drop support for IRDA
2015-03-07 03:26:32 +01:00
ARM: OMAP: serial: remove last vestige of DTR_gpio support.
2014-11-10 09:06:44 -08:00
Revert "serial: sccnxp: Add DT support"
2013-08-02 15:25:19 +08:00
iommu/shmobile: Add iommu driver for Renesas IPMMU modules
2013-02-06 10:57:25 +01:00
hwmon: (sht15) add include guard
2014-01-14 21:36:53 -08:00
hwmon: add support for Sensirion SHTC1 sensor
2014-06-12 08:36:48 -07:00
clk: si5351: Do not pass struct clk in platform_data
2015-05-08 11:22:30 -07:00
fbdev changes for 3.12:
2013-09-05 09:49:32 -07:00
backlight: Add support Skyworks SKY81452 backlight driver
2015-03-12 09:08:19 +00:00
spi/clps711x: New SPI master driver
2012-12-05 23:14:38 +00:00
spi: davinci: Choose correct pre-scaler limit based on SOC
2015-07-24 17:35:51 +01:00
spi: mediatek: fix spi incorrect endian usage
2015-08-20 11:09:47 -07:00
spi: nuc900: Cleanup spi-nuc900.h header
2013-12-30 12:46:20 +00:00
spi: spi-omap2-mcspi.c: Toggle CS after each word
2013-01-26 17:00:04 +08:00
spi/s3c64xx: Trivial cleanup in header file
2014-02-16 09:59:13 +08:00
ASoC: Add ssm2518 support
2013-05-25 10:33:30 -04:00
NFC: st-nci: Add ese-present/uicc-present dts properties
2015-10-27 03:55:10 +01:00
NFC: st21nfca: Adding support for secure element
2015-01-28 00:03:36 +01:00
tpm/tpm_i2c_stm_st33: Split tpm_i2c_tpm_st33 in 2 layers (core + phy)
2015-03-18 22:43:06 +01:00
Input: st1232 - add reset pin handling
2013-04-15 10:00:44 -07:00
iio: Added ST-sensors platform data to select the DRDY interrupt pin
2013-08-03 18:40:28 +01:00
mfd: syscon: Add platform data with a regmap config name
2014-05-15 17:02:19 +01:00
Input: s3c2410 - trivial cleanup in header file
2014-02-14 00:09:43 -08:00
iio:light:tsl2563 move out of staging
2013-01-27 17:37:24 +00:00
Add new uio device for dynamic memory allocation
2012-10-24 15:39:08 -07:00
uio: uio_pruss: replace private SRAM API with genalloc
2012-10-27 16:28:32 +05:30
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
usb: ehci: Cleanup usb-ehci-orion.h header
2014-01-03 12:37:57 -08:00
usb: musb: ux500: move channel number knowledge into the driver
2013-06-04 11:12:02 +02:00
mfd: omap-usb-host: override number of ports from platform data
2013-02-13 13:22:49 +02:00
usb: omap1: add extcon to platform data
2013-12-06 14:36:37 -06:00
phy-rcar-usb: add R8A7778 support
2013-06-11 16:11:16 +09:00
usb: misc: usb3503: Add to select the ports to disable
2013-05-30 21:32:52 +09:00
watchdog: Add support for ux500_wdt watchdog
2013-02-14 00:22:53 +01:00
video: fix up versatile CLCD helper move
2014-07-23 17:41:00 +02:00
ARM/fb: ep93xx: switch framebuffer to use modedb only
2015-08-13 12:25:44 +02:00
video: imxfb: Remove unused fields from platform data structure
2014-02-28 12:35:22 +02:00
video: pxa: Cleanup video-pxafb.h header
2014-01-17 10:57:42 +02:00
video/s3c: move platform_data out of arch/arm
2013-04-11 14:49:20 +03:00
remoteproc/wkup_m3: add a remoteproc driver for TI Wakeup M3
2015-06-17 09:58:08 +03:00
Input: zforce_ts - convert to use the gpiod interface
2015-07-08 21:50:57 -07:00
b0f85fa11a