Sekhar Nori
a8e3923ab5
mtd: rawnand: davinci: don't acquire and enable clock
...
NAND itself is an asynchronous interface, it does not have any
clock input. DaVinci NAND driver acquires clock for AEMIF
(asynchronous external memory interface) which is an on-chip
IP to which NAND is connected.
The same clock is also enabled in AEMIF driver (either present
drivers/memory or from machine code for some older platforms).
AEMIF timing must be initialized before NAND can be accessed.
This ensures that AEMIF clock is enabled too.
Remove the superfluous clock acquisition and enable in DaVinci
NAND driver.
Tested on K2L, K2HK, K2E, DA850 EVM, DA850 LCDK in device-tree
boot and DM644x EVM in legacy boot.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-26 19:55:40 +02:00
..
atmel
MTD changes:
2018-04-06 12:15:41 -07:00
bcm47xxnflash
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
brcmnand
mtd: rawnand: brcmnand: fix probe function error path
2018-03-29 09:38:18 +02:00
gpmi-nand
mtd: rawnand: gpmi: use core timings instead of an empirical derivation
2018-03-20 12:00:00 +01:00
ams-delta.c
au1550nd.c
cafe_nand.c
mtd: rawnand: cafe: fix probe function error path
2018-03-29 09:38:18 +02:00
cmx270_nand.c
cs553x_nand.c
davinci_nand.c
mtd: rawnand: davinci: don't acquire and enable clock
2018-04-26 19:55:40 +02:00
denali.c
mtd: rawnand: denali: fix probe function error path
2018-03-29 09:38:19 +02:00
denali.h
denali_dt.c
denali_pci.c
diskonchip.c
docg4.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_elbc_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_ifc_nand.c
MTD changes:
2018-04-06 12:15:41 -07:00
fsl_upm.c
fsmc_nand.c
gpio.c
hisi504_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
jz4740_nand.c
jz4780_bch.c
jz4780_bch.h
jz4780_nand.c
Kconfig
Linux 4.16-rc2
2018-04-04 22:13:35 +02:00
lpc32xx_mlc.c
lpc32xx_slc.c
Makefile
mtd: rawnand: remove bf5xx_nand driver
2018-03-17 15:35:32 +01:00
marvell_nand.c
mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk
2018-03-29 09:38:21 +02:00
mpc5121_nfc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
mtk_ecc.c
mtk_ecc.h
mtk_nand.c
mxc_nand.c
mtd: rawnand: mxc: fix probe function error path
2018-03-29 09:38:19 +02:00
nand_amd.c
nand_base.c
Core changes:
2018-04-04 22:11:36 +02:00
nand_bbt.c
Core changes:
2018-04-04 22:11:36 +02:00
nand_bch.c
nand_ecc.c
mtd: rawnand: remove STANDALONE compile mode of nand_ecc
2018-03-15 16:42:33 +01:00
nand_hynix.c
nand_ids.c
nand_macronix.c
mtd: rawnand: macronix: nack the support of changing timings for one chip
2018-03-20 11:59:58 +01:00
nand_micron.c
mtd: rawnand: allow vendors to declare (un)supported features
2018-03-20 11:59:58 +01:00
nand_samsung.c
nand_timings.c
mtd: rawnand: prepare the removal of the ONFI parameter page
2018-03-20 11:59:54 +01:00
nand_toshiba.c
nandsim.c
ndfc.c
nuc900_nand.c
omap2.c
mtd: rawnand: omap2: fix the probe function error path
2018-03-29 09:38:20 +02:00
omap_elm.c
orion_nand.c
oxnas_nand.c
pasemi_nand.c
plat_nand.c
qcom_nandc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
r852.c
r852.h
s3c2410.c
mtd: rawnand: s3c2410: enhance the probe function error path
2018-03-29 09:38:21 +02:00
sh_flctl.c
mtd: rawnand: sh_flctl: fix the probe function error path
2018-03-29 09:38:20 +02:00
sharpsl.c
sm_common.c
sm_common.h
socrates_nand.c
sunxi_nand.c
mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode
2018-03-29 09:38:17 +02:00
tango_nand.c
mtd: rawnand: tango: fix probe function error path
2018-03-29 09:38:20 +02:00
tmio_nand.c
txx9ndfmc.c
vf610_nfc.c
Linux 4.16-rc2
2018-04-04 22:13:35 +02:00
xway_nand.c