Watch
1
0
Fork
You've already forked kernel_a52xq
0
mirror of https://github.com/a52xq-dev/kernel.git synced 2026-11-22 01:46:57 +07:00
kernel_a52xq/drivers/mtd/nand/raw
Repository files (latest commit first)
Filename Latest commit message Latest commit date
Masahiro Yamada 9cc1cbc1c6 mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
[ Upstream commit 0d55c668b218a1db68b5044bce4de74e1bd0f0c8 ]

NAND devices need additional data area (OOB) for error correction,
but it is also used for Bad Block Marker (BBM).  In many cases, the
first byte in OOB is used for BBM, but the location actually depends
on chip vendors.  The NAND controller should preserve the precious
BBM to keep track of bad blocks.

In Denali IP, the SPARE_AREA_SKIP_BYTES register is used to specify
the number of bytes to skip from the start of OOB.  The ECC engine
will automatically skip the specified number of bytes when it gets
access to OOB area.

The same value for SPARE_AREA_SKIP_BYTES should be used between
firmware and the operating system if you intend to use the NAND
device across the control hand-off.

In fact, the current denali.c code expects firmware to have already
set the SPARE_AREA_SKIP_BYTES register, then reads the value out.

If no firmware (or bootloader) has initialized the controller, the
register value is zero, which is the default after power-on-reset.
In other words, the Linux driver cannot initialize the controller
by itself.

Some possible solutions are:

 [1] Add a DT property to specify the skipped bytes in OOB
 [2] Associate the preferred value with compatible
 [3] Hard-code the default value in the driver

My first attempt was [1], but in the review process, [3] was suggested
as a counter-implementation.
(https://lore.kernel.org/patchwork/patch/983055/)

The default value 8 was chosen to match to the boot ROM of the UniPhier
platform.  The preferred value may vary by platform.  If so, please
trade up to a different solution.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13 11:08:23 -08:00
..
atmel mtd: rawnand: atmel: convert driver to nand_scan() 2018-07-31 09:46:09 +02:00
bcm47xxnflash
brcmnand Char/Misc driver patches for 4.19-rc1 2018-08-18 11:04:51 -07:00
gpmi-nand mtd: rawnand: gpmi: convert driver to nand_scan() 2018-07-31 09:45:58 +02:00
ams-delta.c
au1550nd.c mtd: rawnand: au1550nd: Remove unneeded gpio.h inclusion 2018-07-31 09:45:54 +02:00
cafe_nand.c mtd: rawnand: cafe: convert driver to nand_scan() 2018-07-31 09:46:07 +02:00
cmx270_nand.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
cs553x_nand.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
davinci_nand.c mtd: rawnand: davinci: convert driver to nand_scan() 2018-07-31 09:45:55 +02:00
denali.c mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset 2018-11-13 11:08:23 -08:00
denali.h mtd: rawnand: denali: optimize timing parameters for data interface 2018-07-18 09:24:14 +02:00
denali_dt.c mtd: rawnand: denali: optimize timing parameters for data interface 2018-07-18 09:24:14 +02:00
denali_pci.c mtd: rawnand: denali: optimize timing parameters for data interface 2018-07-18 09:24:14 +02:00
diskonchip.c mtd: rawnand: Kill the chip->scan_bbt() hook 2018-07-18 10:10:12 +02:00
docg4.c mtd: rawnand: docg4: Remove wrong __init annotations 2018-08-27 10:16:56 +02:00
fsl_elbc_nand.c mtd: rawnand: fsl_elbc: convert driver to nand_scan() 2018-07-31 09:45:57 +02:00
fsl_ifc_nand.c mtd: rawnand: fsl_ifc: convert driver to nand_scan() 2018-07-31 09:45:57 +02:00
fsl_upm.c
fsmc_nand.c mtd: rawnand: fsmc: convert driver to nand_scan() 2018-07-31 09:45:57 +02:00
gpio.c
hisi504_nand.c mtd: rawnand: hisi504: convert driver to nand_scan() 2018-07-31 09:45:58 +02:00
jz4740_nand.c mtd: rawnand: jz4740: convert driver to nand_scan() 2018-07-31 09:46:11 +02:00
jz4780_bch.c
jz4780_bch.h
jz4780_nand.c mtd: rawnand: jz4780: convert driver to nand_scan() 2018-07-31 09:45:59 +02:00
Kconfig mtd: rawnand: atmel: Select GENERIC_ALLOCATOR 2018-08-11 18:07:44 +02:00
lpc32xx_mlc.c mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan() 2018-07-31 09:46:07 +02:00
lpc32xx_slc.c mtd: rawnand: lpc32xx_slc: convert driver to nand_scan() 2018-07-31 09:45:59 +02:00
Makefile mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver 2018-07-02 09:02:06 +02:00
marvell_nand.c mtd: rawnand: marvell: fix the IRQ handler complete() condition 2018-11-13 11:08:14 -08:00
mpc5121_nfc.c
mtk_ecc.c mtd: rawnand: mtk: use of_device_get_match_data() 2018-04-29 08:56:41 +02:00
mtk_ecc.h
mtk_nand.c mtd: rawnand: mtk: convert driver to nand_scan() 2018-07-31 09:46:00 +02:00
mxc_nand.c mtd: rawnand: mxc: convert driver to nand_scan() 2018-07-31 09:46:01 +02:00
nand_amd.c
nand_base.c mtd: rawnand: allocate dynamically ONFI parameters during detection 2018-08-01 09:45:59 +02:00
nand_bbt.c mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt() 2018-07-18 09:34:22 +02:00
nand_bch.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
nand_ecc.c
nand_hynix.c mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op() 2018-07-18 10:10:15 +02:00
nand_ids.c
nand_macronix.c mtd: rawnand: All AC chips have a broken GET_FEATURES(TIMINGS). 2018-06-22 00:31:22 +02:00
nand_micron.c mtd: rawnand: allocate dynamically ONFI parameters during detection 2018-08-01 09:45:59 +02:00
nand_samsung.c
nand_timings.c mtd: rawnand: allocate dynamically ONFI parameters during detection 2018-08-01 09:45:59 +02:00
nand_toshiba.c
nandsim.c mtd: rawnand: nandsim: convert driver to nand_scan() 2018-07-31 09:46:01 +02:00
ndfc.c mtd: rawnand: better name for the controller structure 2018-07-31 09:45:52 +02:00
nuc900_nand.c
omap2.c mtd: rawnand: omap2: convert driver to nand_scan() 2018-07-31 09:46:08 +02:00
omap_elm.c
orion_nand.c mtd: rawnand: orion: Handle cases where __LINUX_ARM_ARCH__ is not defined 2018-07-31 09:45:51 +02:00
oxnas_nand.c mtd: rawnand: better name for the controller structure 2018-07-31 09:45:52 +02:00
pasemi_nand.c
plat_nand.c mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}() 2018-07-18 10:10:12 +02:00
qcom_nandc.c mtd: rawnand: qcom: convert driver to nand_scan() 2018-07-31 09:46:05 +02:00
r852.c
r852.h
s3c2410.c mtd: rawnand: s3c2410: convert driver to nand_scan() 2018-07-31 09:46:01 +02:00
sh_flctl.c mtd: rawnand: sh_flctl: convert driver to nand_scan() 2018-07-31 09:46:02 +02:00
sharpsl.c mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers 2018-07-18 09:34:16 +02:00
sm_common.c mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() 2018-07-31 09:46:04 +02:00
sm_common.h
socrates_nand.c
sunxi_nand.c mtd: rawnand: sunxi: convert driver to nand_scan() 2018-07-31 09:46:02 +02:00
tango_nand.c mtd: rawnand: tango: convert driver to nand_scan() 2018-07-31 09:46:03 +02:00
tegra_nand.c mtd: rawnand: tegra: convert driver to nand_scan() 2018-07-31 09:46:12 +02:00
tmio_nand.c
txx9ndfmc.c mtd: rawnand: txx9ndfmc: convert driver to nand_scan() 2018-07-31 09:46:13 +02:00
vf610_nfc.c mtd: rawnand: vf610: convert driver to nand_scan() 2018-07-31 09:46:04 +02:00
xway_nand.c