Watch
1
0
Fork
You've already forked kernel_a52xq
0
mirror of https://github.com/a52xq-dev/kernel.git synced 2026-11-22 01:46:57 +07:00
kernel_a52xq/drivers/mtd/nand/raw
Repository files (latest commit first)
Filename Latest commit message Latest commit date
Miquel Raynal 6a943386ee mtd: rawnand: add default values for dynamic timings
Some timings like tBERS (block erase time), tCCs (change column setup
time), tPROG (page program time) and tR (page read time) are derived
from the ONFI parameter page. They are set in the SDR interface only
if the chip is ONFI compliant.

It makes these timings unreliable and prevent the driver to use one of
these four values with a non-ONFI chip.

Fix this situation by taking the highest possible value (or a default
one) value for each missing timing (stored as unsigned 16-bit entries in
the parameter page).

This makes tBERS and tPROG being ~65ms while typical values are at most
a few milliseconds. As these are timeouts, it is not impacting at all
the performances in nominal use.

tR maximum time and tCCS minimum time (delay to wait after a change
column) are set, according to the ONFI specification, to default 'slow'
values; respectively 200us and 500ns.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-07-19 23:14:13 +02:00
..
atmel mtd: rawnand: atmel: Add an __iomem cast on gen_pool_dma_alloc() call 2018-07-18 10:10:16 +02:00
bcm47xxnflash
brcmnand
gpmi-nand mtd: rawnand: gpmi: Switch to SPDX identifier 2018-07-18 10:10:13 +02:00
ams-delta.c
au1550nd.c
cafe_nand.c mtd: rawnand: Kill cafe_nand_bug() 2018-07-18 09:34:20 +02:00
cmx270_nand.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
cs553x_nand.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
davinci_nand.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
denali.c mtd: rawnand: denali: optimize timing parameters for data interface 2018-07-18 09:24:14 +02:00
denali.h mtd: rawnand: denali: optimize timing parameters for data interface 2018-07-18 09:24:14 +02:00
denali_dt.c mtd: rawnand: denali: optimize timing parameters for data interface 2018-07-18 09:24:14 +02:00
denali_pci.c mtd: rawnand: denali: optimize timing parameters for data interface 2018-07-18 09:24:14 +02:00
diskonchip.c mtd: rawnand: Kill the chip->scan_bbt() hook 2018-07-18 10:10:12 +02:00
docg4.c mtd: rawnand: docg4: fix the probe function error path 2018-07-18 09:24:15 +02:00
fsl_elbc_nand.c mtd: rawnand: fsl_elbc: fix probe function error path 2018-04-29 08:56:42 +02:00
fsl_ifc_nand.c mtd: rawnand: fsl_ifc: Add an __iomem specifier on eccstat_regs 2018-07-18 10:10:22 +02:00
fsl_upm.c
fsmc_nand.c mtd: rawnand: fsmc: Use uintptr_t casts instead of unsigned ones 2018-07-18 10:10:20 +02:00
gpio.c
hisi504_nand.c mtd: rawnand: hisi504: fix the probe function error path 2018-04-29 08:56:44 +02:00
jz4740_nand.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
jz4780_bch.c
jz4780_bch.h
jz4780_nand.c
Kconfig mtd: rawnand: MTD_NAND_BCM47XXNFLASH needs CONFIG_BCMA 2018-07-19 23:14:11 +02:00
lpc32xx_mlc.c mtd: rawnand: lpc32xx_mlc: fix the probe function error path 2018-04-29 08:56:45 +02:00
lpc32xx_slc.c mtd: rawnand: lpc32xx_slc: fix the probe function error path 2018-04-29 08:56:46 +02:00
Makefile mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver 2018-07-02 09:02:06 +02:00
marvell_nand.c mtd: rawnand: marvell: set reg_clk to NULL if it can't be obtained 2018-07-18 10:10:15 +02:00
mpc5121_nfc.c
mtk_ecc.c mtd: rawnand: mtk: use of_device_get_match_data() 2018-04-29 08:56:41 +02:00
mtk_ecc.h
mtk_nand.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
mxc_nand.c mtd: rawnand: mxc: Switch to SPDX identifier 2018-07-18 10:10:13 +02:00
nand_amd.c
nand_base.c mtd: rawnand: Kill the chip->scan_bbt() hook 2018-07-18 10:10:12 +02:00
nand_bbt.c mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt() 2018-07-18 09:34:22 +02:00
nand_bch.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
nand_ecc.c
nand_hynix.c mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op() 2018-07-18 10:10:15 +02:00
nand_ids.c
nand_macronix.c mtd: rawnand: All AC chips have a broken GET_FEATURES(TIMINGS). 2018-06-22 00:31:22 +02:00
nand_micron.c mtd: rawnand: micron: add fixup for ONFI revision 2018-07-02 09:02:28 +02:00
nand_samsung.c
nand_timings.c mtd: rawnand: add default values for dynamic timings 2018-07-19 23:14:13 +02:00
nand_toshiba.c
nandsim.c mtd: rawnand: Kill the chip->scan_bbt() hook 2018-07-18 10:10:12 +02:00
ndfc.c
nuc900_nand.c
omap2.c
omap_elm.c
orion_nand.c mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready() 2018-07-18 10:10:12 +02:00
oxnas_nand.c
pasemi_nand.c
plat_nand.c mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}() 2018-07-18 10:10:12 +02:00
qcom_nandc.c mtd: rawnand: qcom: erased page bitflips detection 2018-07-18 09:24:16 +02:00
r852.c
r852.h
s3c2410.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
sh_flctl.c
sharpsl.c mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers 2018-07-18 09:34:16 +02:00
sm_common.c
sm_common.h
socrates_nand.c
sunxi_nand.c mtd: rawnand: sunxi: Make sure ret is initialized in sunxi_nfc_read_byte() 2018-07-18 10:10:19 +02:00
tango_nand.c
tegra_nand.c mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver 2018-07-02 09:02:06 +02:00
tmio_nand.c
txx9ndfmc.c mtd: rawnand: use mtd_device_register() where applicable 2018-07-19 23:14:12 +02:00
vf610_nfc.c
xway_nand.c