Miquel Raynal
415ae78ffb
mtd: rawnand: check ONFI timings have been acked by the chip
...
Choosing ONFI timings when ->set/get_features() calls are supported
by the NAND chip is a matter of reading the chip's ONFI parameter page
and telling the chip the chosen mode (between all of the supported ones)
with ->set_feature().
Add a check on whether the chip "acked" the timing mode or not.
This can be a problem for NAND chips that do not follow entirely the
ONFI specification. These chips actually support other modes than
"mode 0", but either:
1/ do not update the timing mode register once a timing mode has been
selected.
or
2/ do not support the TIMING_MODE featured and thus do not require users
to change the timing mode at all.
These issues will be addressed in another patch that will add the
feature to overwrite NAND chips features within the parameter page, from
the NAND chip driver.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:49:41 +01:00
..
atmel
bcm47xxnflash
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
brcmnand
gpmi-nand
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
2018-03-20 09:46:02 +01:00
ams-delta.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
au1550nd.c
cafe_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
cmx270_nand.c
cs553x_nand.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
davinci_nand.c
denali.c
denali.h
denali_dt.c
denali_pci.c
diskonchip.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
docg4.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_elbc_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_ifc_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_upm.c
fsmc_nand.c
gpio.c
hisi504_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
jz4740_nand.c
jz4780_bch.c
jz4780_bch.h
jz4780_nand.c
Kconfig
mtd: rawnand: makes the Kconfig entry clear when it comes to raw NANDs
2018-03-19 10:53:59 +01:00
lpc32xx_mlc.c
lpc32xx_slc.c
Makefile
mtd: rawnand: remove bf5xx_nand driver
2018-03-17 15:35:32 +01:00
marvell_nand.c
mpc5121_nfc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
mtk_ecc.c
mtk_ecc.h
mtk_nand.c
mxc_nand.c
mtd: rawnand: mxc: remove useless checks in GET/SET_FEATURES functions
2018-03-20 09:48:45 +01:00
nand_amd.c
nand_base.c
mtd: rawnand: check ONFI timings have been acked by the chip
2018-03-20 09:49:41 +01:00
nand_bbt.c
nand_bch.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
nand_ecc.c
mtd: rawnand: remove STANDALONE compile mode of nand_ecc
2018-03-15 16:42:33 +01:00
nand_hynix.c
nand_ids.c
nand_macronix.c
nand_micron.c
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
2018-03-20 09:46:02 +01:00
nand_samsung.c
nand_timings.c
nand_toshiba.c
nandsim.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
ndfc.c
nuc900_nand.c
omap2.c
omap_elm.c
orion_nand.c
oxnas_nand.c
pasemi_nand.c
plat_nand.c
qcom_nandc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
r852.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
r852.h
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
s3c2410.c
sh_flctl.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
sharpsl.c
sm_common.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
sm_common.h
socrates_nand.c
sunxi_nand.c
tango_nand.c
tmio_nand.c
txx9ndfmc.c
vf610_nfc.c
mtd: rawnand: vf610_nfc: support ONFI SET/GET_FEATURES commands
2018-03-17 15:35:32 +01:00
xway_nand.c