Miquel Raynal
29714d6bd7
mtd: rawnand: move calls to ->select_chip() in nand_setup_data_interface()
...
After a ->set_features(TIMINGS), the chip is supposed to be working at a
new speed. In order for all the transactions to be perperly handled, the
NAND controller should also be configured to this same speed. Calling
->setup_data_interface() is not enough and the chip should be
de-asserted/re-asserted through calls to ->select_chip().
Prepare the next change in nand_setup_data_interface() where timings
will be checked after being applied. Because assertions of the CS pin
will be needed from within this function, move the calls to
->select_chip() inside nand_setup_data_interface() for later
consistency.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:49:11 +01:00
..
atmel
bcm47xxnflash
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
brcmnand
gpmi-nand
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
2018-03-20 09:46:02 +01:00
ams-delta.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
au1550nd.c
cafe_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
cmx270_nand.c
cs553x_nand.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
davinci_nand.c
denali.c
denali.h
denali_dt.c
denali_pci.c
diskonchip.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
docg4.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_elbc_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_ifc_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_upm.c
fsmc_nand.c
gpio.c
hisi504_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
jz4740_nand.c
jz4780_bch.c
jz4780_bch.h
jz4780_nand.c
Kconfig
mtd: rawnand: makes the Kconfig entry clear when it comes to raw NANDs
2018-03-19 10:53:59 +01:00
lpc32xx_mlc.c
lpc32xx_slc.c
Makefile
mtd: rawnand: remove bf5xx_nand driver
2018-03-17 15:35:32 +01:00
marvell_nand.c
mpc5121_nfc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
mtk_ecc.c
mtk_ecc.h
mtk_nand.c
mxc_nand.c
mtd: rawnand: mxc: remove useless checks in GET/SET_FEATURES functions
2018-03-20 09:48:45 +01:00
nand_amd.c
nand_base.c
mtd: rawnand: move calls to ->select_chip() in nand_setup_data_interface()
2018-03-20 09:49:11 +01:00
nand_bbt.c
nand_bch.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
nand_ecc.c
mtd: rawnand: remove STANDALONE compile mode of nand_ecc
2018-03-15 16:42:33 +01:00
nand_hynix.c
nand_ids.c
nand_macronix.c
nand_micron.c
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
2018-03-20 09:46:02 +01:00
nand_samsung.c
nand_timings.c
nand_toshiba.c
nandsim.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
ndfc.c
nuc900_nand.c
omap2.c
omap_elm.c
orion_nand.c
oxnas_nand.c
pasemi_nand.c
plat_nand.c
qcom_nandc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
r852.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
r852.h
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
s3c2410.c
sh_flctl.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
sharpsl.c
sm_common.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
sm_common.h
socrates_nand.c
sunxi_nand.c
tango_nand.c
tmio_nand.c
txx9ndfmc.c
vf610_nfc.c
mtd: rawnand: vf610_nfc: support ONFI SET/GET_FEATURES commands
2018-03-17 15:35:32 +01:00
xway_nand.c