Miquel Raynal
107b7d6a7a
mtd: rawnand: avoid setting again the timings to mode 0 after a reset
...
After a nand_reset_data_interface(), both the NAND chip and the NAND
controller use timing mode 0. The previously defined data interface for
this chip has been saved and is supposed to be restored after that.
However, if the saved data interface also refers to timing mode 0, there
is no need to re-apply them again.
Also, as nand_setup_data_interface() uses ->set/get_features(), it could
lead to issues when doing the reset at probe time as the parameter page
is not available yet to know if these functions are supported or not.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20 09:51:01 +01:00
..
atmel
bcm47xxnflash
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
brcmnand
gpmi-nand
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
2018-03-20 09:46:02 +01:00
ams-delta.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
au1550nd.c
cafe_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
cmx270_nand.c
cs553x_nand.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
davinci_nand.c
denali.c
denali.h
denali_dt.c
denali_pci.c
diskonchip.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
docg4.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_elbc_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_ifc_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
fsl_upm.c
fsmc_nand.c
gpio.c
hisi504_nand.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
jz4740_nand.c
jz4780_bch.c
jz4780_bch.h
jz4780_nand.c
Kconfig
mtd: rawnand: makes the Kconfig entry clear when it comes to raw NANDs
2018-03-19 10:53:59 +01:00
lpc32xx_mlc.c
lpc32xx_slc.c
Makefile
mtd: rawnand: remove bf5xx_nand driver
2018-03-17 15:35:32 +01:00
marvell_nand.c
mpc5121_nfc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
mtk_ecc.c
mtk_ecc.h
mtk_nand.c
mxc_nand.c
mtd: rawnand: mxc: remove useless checks in GET/SET_FEATURES functions
2018-03-20 09:48:45 +01:00
nand_amd.c
nand_base.c
mtd: rawnand: avoid setting again the timings to mode 0 after a reset
2018-03-20 09:51:01 +01:00
nand_bbt.c
nand_bch.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
nand_ecc.c
mtd: rawnand: remove STANDALONE compile mode of nand_ecc
2018-03-15 16:42:33 +01:00
nand_hynix.c
nand_ids.c
nand_macronix.c
nand_micron.c
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
2018-03-20 09:46:02 +01:00
nand_samsung.c
nand_timings.c
nand_toshiba.c
nandsim.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
ndfc.c
nuc900_nand.c
omap2.c
omap_elm.c
orion_nand.c
oxnas_nand.c
pasemi_nand.c
plat_nand.c
qcom_nandc.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
r852.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
r852.h
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
s3c2410.c
sh_flctl.c
mtd: rawnand: rename SET/GET FEATURES related functions
2018-03-20 09:33:22 +01:00
sharpsl.c
sm_common.c
mtd: rawnand: Replace printk() with appropriate pr_*() macro
2018-03-15 15:57:05 +01:00
sm_common.h
socrates_nand.c
sunxi_nand.c
tango_nand.c
tmio_nand.c
txx9ndfmc.c
vf610_nfc.c
mtd: rawnand: vf610_nfc: support ONFI SET/GET_FEATURES commands
2018-03-17 15:35:32 +01:00
xway_nand.c