mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-19 06:08:12 +07:00
| SHA1 | ||
|---|---|---|
Pull timer fixes from Ingo Molnar: "A clocksource driver fix and a revert" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: arm_arch_timer: Set arch_mem_timer cpumask to cpu_possible_mask Revert "tick: Prefer a lower rating device only if it's CPU local device" 
Linus Torvalds
commited |
3951dbf232 | |
Pull rseq fixes from Ingo Molnar: "Various rseq ABI fixes and cleanups: use get_user()/put_user(), validate parameters and use proper uapi types, etc" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rseq/selftests: cleanup: Update comment above rseq_prepare_unload rseq: Remove unused types_32_64.h uapi header rseq: uapi: Declare rseq_cs field as union, update includes rseq: uapi: Update uapi comments rseq: Use get_user/put_user rather than __get_user/__put_user rseq: Use __u64 for rseq_cs fields, validate user inputs
Linus Torvalds
commited |
ae4ea3975d | |
own patch internally for. I took it back in 4.13. Now he realizes that he had a mistake, and swapped the values from what Android had. This means that the old Android tools will break when using a new kernel that has the new feature on it. The options are: 1. To swap it back to what Android wants. 2. Add a command line option or something to do the swap 3. Just let Android carry a patch that swaps it back Since it requires setting a tracing option to enable this anyway, I doubt there are other users of this than Android. Thus, I've decided to take option 1. If someone else is actually depending on the order that is in the kernel, then we will have to revert this change and go to option 2 or 3. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW0ib3BQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qpH2APwJb1C72w6/QF9QK8I7HWzK3BN+9KuK xfJA+58HXzu7SgD+IXzhXW9tODU+sWbYr9cVOyj2ad6p8CYNDkPlVAJulwM= =XJE5 -----END PGP SIGNATURE----- Merge tag 'trace-v4.18-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixlet from Steven Rostedt: "Joel Fernandes asked to add a feature in tracing that Android had its own patch internally for. I took it back in 4.13. Now he realizes that he had a mistake, and swapped the values from what Android had. This means that the old Android tools will break when using a new kernel that has the new feature on it. The options are: 1. To swap it back to what Android wants. 2. Add a command line option or something to do the swap 3. Just let Android carry a patch that swaps it back Since it requires setting a tracing option to enable this anyway, I doubt there are other users of this than Android. Thus, I've decided to take option 1. If someone else is actually depending on the order that is in the kernel, then we will have to revert this change and go to option 2 or 3" * tag 'trace-v4.18-rc3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Reorder display of TGID to be after PID
Linus Torvalds
commited |
35a84f34cf | |
Currently ftrace displays data in trace output like so:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID CPU TGID |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 [000] ( 1091) d..2 28.313544: sched_switch:
However Android's trace visualization tools expect a slightly different
format due to an out-of-tree patch patch that was been carried for a
decade, notice that the TGID and CPU fields are reversed:
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID TGID CPU |||| TIMESTAMP FUNCTION
| | | | |||| | |
bash-1091 ( 1091) [002] d..2 64.965177: sched_switch:
From kernel v4.13 onwards, during which TGID was introduced, tracing
with systrace on all Android kernels will break (most Android kernels
have been on 4.9 with Android patches, so this issues hasn't been seen
yet). From v4.13 onwards things will break.
The chrome browser's tracing tools also embed the systrace viewer which
uses the legacy TGID format and updates to that are known to be
difficult to make.
Considering this, I suggest we make this change to the upstream kernel
and backport it to all Android kernels. I believe this feature is merged
recently enough into the upstream kernel that it shouldn't be a problem.
Also logically, IMO it makes more sense to group the TGID with the
TASK-PID and the CPU after these.
Link: http://lkml.kernel.org/r/20180626000822.113931-1-joel@joelfernandes.org
Cc: jreck@google.com
Cc: tkjos@google.com
Cc: stable@vger.kernel.org
Fixes:
Joel Fernandes (Google)
authored and
 Steven Rostedt (VMware)
commited |
f8494fa3dd | |
-----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW0ZhphQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qlxwAP4jKOp86ljtdqHSlh9mOHChnvwdMprQ kaQ82WiamGikIwD/Vo/6ynsVl5eYMDO2VQSv6W1DHmhV9I/KgdqcQBl8jAk= =RF9o -----END PGP SIGNATURE----- Merge tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull kprobe fix from Steven Rostedt: "This fixes a memory leak in the kprobe code" * tag 'trace-v4.18-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobe: Release kprobe print_fmt properly
Linus Torvalds
commited |
c25c74b747 | |
We don't release tk->tp.call.print_fmt when destroying
local uprobe. Also there's missing print_fmt kfree in
create_local_trace_kprobe error path.
Link: http://lkml.kernel.org/r/20180709141906.2390-1-jolsa@kernel.org
Cc: stable@vger.kernel.org
Fixes:
Jiri Olsa
authored and
Steven Rostedt (VMware)
commited |
0fc8c3581d | |
Declaring the rseq_cs field as a union between __u64 and two __u32 allows both 32-bit and 64-bit kernels to read the full __u64, and therefore validate that a 32-bit user-space cleared the upper 32 bits, thus ensuring a consistent behavior between native 32-bit kernels and 32-bit compat tasks on 64-bit kernels. Check that the rseq_cs value read is < TASK_SIZE. The asm/byteorder.h header needs to be included by rseq.h, now that it is not using linux/types_32_64.h anymore. Considering that only __32 and __u64 types are declared in linux/rseq.h, the linux/types.h header should always be included for both kernel and user-space code: including stdint.h is just for u64 and u32, which are not used in this header at all. Use copy_from_user()/clear_user() to interact with a 64-bit field, because arm32 does not implement 64-bit __get_user, and ppc32 does not 64-bit get_user. Considering that the rseq_cs pointer does not need to be loaded/stored with single-copy atomicity from the kernel anymore, we can simply use copy_from_user()/clear_user(). Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Watson <davejwatson@fb.com> Cc: Paul Turner <pjt@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Chris Lameter <cl@linux.com> Cc: Ben Maurer <bmaurer@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Joel Fernandes <joelaf@google.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180709195155.7654-5-mathieu.desnoyers@efficios.com 
Mathieu Desnoyers
authored and
 Thomas Gleixner
commited |
ec9c82e03a | |
Update rseq uapi header comments to reflect that user-space need to do thread-local loads/stores from/to the struct rseq fields. As a consequence of this added requirement, the kernel does not need to perform loads/stores with single-copy atomicity. Update the comment associated to the "flags" fields to describe more accurately that it's only useful to facilitate single-stepping through rseq critical sections with debuggers. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Watson <davejwatson@fb.com> Cc: Paul Turner <pjt@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Chris Lameter <cl@linux.com> Cc: Ben Maurer <bmaurer@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Joel Fernandes <joelaf@google.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180709195155.7654-4-mathieu.desnoyers@efficios.com
Mathieu Desnoyers
authored and
Thomas Gleixner
commited |
0fb9a1abc8 | |
__get_user()/__put_user() is used to read values for address ranges that
were already checked with access_ok() on rseq registration.
It has been recognized that __get_user/__put_user are optimizing the
wrong thing. Replace them by get_user/put_user across rseq instead.
If those end up showing up in benchmarks, the proper approach would be to
use user_access_begin() / unsafe_{get,put}_user() / user_access_end()
anyway.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-api@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Watson <davejwatson@fb.com>
Cc: Paul Turner <pjt@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Chris Lameter <cl@linux.com>
Cc: Ben Maurer <bmaurer@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lkml.kernel.org/r/20180709195155.7654-3-mathieu.desnoyers@efficios.com
Mathieu Desnoyers
authored and
Thomas Gleixner
commited |
8f28177014 | |
Change the rseq ABI so rseq_cs start_ip, post_commit_offset and abort_ip fields are seen as 64-bit fields by both 32-bit and 64-bit kernels rather that ignoring the 32 upper bits on 32-bit kernels. This ensures we have a consistent behavior for a 32-bit binary executed on 32-bit kernels and in compat mode on 64-bit kernels. Validating the value of abort_ip field to be below TASK_SIZE ensures the kernel don't return to an invalid address when returning to userspace after an abort. I don't fully trust each architecture code to consistently deal with invalid return addresses. Validating the value of the start_ip and post_commit_offset fields prevents overflow on arithmetic performed on those values, used to check whether abort_ip is within the rseq critical section. If validation fails, the process is killed with a segmentation fault. When the signature encountered before abort_ip does not match the expected signature, return -EINVAL rather than -EPERM to be consistent with other input validation return codes from rseq_get_rseq_cs(). Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-api@vger.kernel.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Watson <davejwatson@fb.com> Cc: Paul Turner <pjt@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Chris Lameter <cl@linux.com> Cc: Ben Maurer <bmaurer@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Joel Fernandes <joelaf@google.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lkml.kernel.org/r/20180709195155.7654-2-mathieu.desnoyers@efficios.com
Mathieu Desnoyers
authored and
Thomas Gleixner
commited |
e96d71359e | |
This reverts commit
Sudeep Holla
authored and
Thomas Gleixner
commited |
5b5ccbc2b0 | |
Pull scheduler fixes from Thomas Gleixner: - The hopefully final fix for the reported race problems in kthread_parkme(). The previous attempt still left a hole and was partially wrong. - Plug a race in the remote tick mechanism which triggers a warning about updates not being done correctly. That's a false positive if the race condition is hit as the remote CPU is idle. Plug it by checking the condition again when holding run queue lock. - Fix a bug in the utilization estimation of a run queue which causes the estimation to be 0 when a run queue is throttled. - Advance the global expiration of the period timer when the timer is restarted after a idle period. Otherwise the expiry time is stale and the timer fires prematurely. - Cure the drift between the bandwidth timer and the runqueue accounting, which leads to bogus throttling of runqueues - Place the call to cpufreq_update_util() correctly so the function will observe the correct number of running RT tasks and not a stale one. * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kthread, sched/core: Fix kthread_parkme() (again...) sched/util_est: Fix util_est_dequeue() for throttled cfs_rq sched/fair: Advance global expiration when period timer is restarted sched/fair: Fix bandwidth timer clock drift condition sched/rt: Fix call to cpufreq_update_util() sched/nohz: Skip remote tick on idle task entirely
Linus Torvalds
commited |
6fb2489d7f | |
in the noise. These are minor bug fixes and clean ups. Those include: - Avoiding a string overflow - Code that didn't match the comment (but should) - A small code optimization (use of a conditional) - Quieting printf warnings - Nuking unused code - Fixing function graph interrupt annotation -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWz7ARhQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qmMqAQDTS7uvFLRR603WXyOazX6Y7FeiYFWp MUUZjnbG9u0bawEAulW53AM0OL3EAAaZKtPi8VtsT+uktR1GIynXrp+yoww= =yQDv -----END PGP SIGNATURE----- Merge tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes and cleanups from Steven Rostedt: "While cleaning out my INBOX, I found a few patches that were lost in the noise. These are minor bug fixes and clean ups. Those include: - avoid a string overflow - code that didn't match the comment (but should) - a small code optimization (use of a conditional) - quiet printf warnings - nuke unused code - fix function graph interrupt annotation" * tag 'trace-v4.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix missing return symbol in function_graph output ftrace: Nuke clear_ftrace_function tracing: Use __printf markup to silence compiler tracing: Optimize trace_buffer_iter() logic tracing: Make create_filter() code match the comments tracing: Avoid string overflow
Linus Torvalds
commited |
97f4e14229 | |
The function_graph tracer does not show the interrupt return marker for the
leaf entry. On leaf entries, we see an unbalanced interrupt marker (the
interrupt was entered, but nevern left).
Before:
1) | SyS_write() {
1) | __fdget_pos() {
1) 0.061 us | __fget_light();
1) 0.289 us | }
1) | vfs_write() {
1) 0.049 us | rw_verify_area();
1) + 15.424 us | __vfs_write();
1) ==========> |
1) 6.003 us | smp_apic_timer_interrupt();
1) 0.055 us | __fsnotify_parent();
1) 0.073 us | fsnotify();
1) + 23.665 us | }
1) + 24.501 us | }
After:
0) | SyS_write() {
0) | __fdget_pos() {
0) 0.052 us | __fget_light();
0) 0.328 us | }
0) | vfs_write() {
0) 0.057 us | rw_verify_area();
0) | __vfs_write() {
0) ==========> |
0) 8.548 us | smp_apic_timer_interrupt();
0) <========== |
0) + 36.507 us | } /* __vfs_write */
0) 0.049 us | __fsnotify_parent();
0) 0.066 us | fsnotify();
0) + 50.064 us | }
0) + 50.952 us | }
Link: http://lkml.kernel.org/r/1517413729-20411-1-git-send-email-changbin.du@intel.com
Cc: stable@vger.kernel.org
Fixes:
Changbin Du
authored and
Steven Rostedt (VMware)
commited |
1fe4293f4b | |
clear_ftrace_function is not used outside of ftrace.c and is not help to use a function, so nuke it per Steve's suggestion. Link: http://lkml.kernel.org/r/1517537689-34947-1-git-send-email-xieyisheng1@huawei.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 
Yisheng Xie
authored and
Steven Rostedt (VMware)
commited |
5ccba64a56 | |
Silence warnings (triggered at W=1) by adding relevant __printf attributes. CC kernel/trace/trace.o kernel/trace/trace.c: In function ‘__trace_array_vprintk’: kernel/trace/trace.c:2979:2: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] len = vscnprintf(tbuffer, TRACE_BUF_SIZE, fmt, args); ^~~ AR kernel/trace/built-in.o Link: http://lkml.kernel.org/r/20180308205843.27447-1-malat@debian.org Signed-off-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 
Mathieu Malaterre
authored and
Steven Rostedt (VMware)
commited |
26b68dd2f4 | |
Simplify and optimize the logic in trace_buffer_iter() to use a conditional operation instead of an if conditional. Link: http://lkml.kernel.org/r/20180408113631.3947-1-cugyly@163.com Signed-off-by: yuan linyu <Linyu.Yuan@alcatel-sbell.com.cn> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 
yuan linyu
authored and
Steven Rostedt (VMware)
commited |
f26808ba72 | |
The comment in create_filter() states that the passed in filter pointer (filterp) will either be NULL or contain an error message stating why the filter failed. But it also expects the filter pointer to point to NULL when passed in. If it is not, the function create_filter_start() will warn and return an error message without updating the filter pointer. This is not what the comment states. As we always expect the pointer to point to NULL, if it is not, trigger a WARN_ON(), set it to NULL, and then continue the path as the rest will work as the comment states. Also update the comment to state it must point to NULL. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware)
commited |
f90658725b | |
'err' is used as a NUL-terminated string, but using strncpy() with the length
equal to the buffer size may result in lack of the termination:
kernel/trace/trace_events_hist.c: In function 'hist_err_event':
kernel/trace/trace_events_hist.c:396:3: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
strncpy(err, var, MAX_FILTER_STR_VAL);
This changes it to use the safer strscpy() instead.
Link: http://lkml.kernel.org/r/20180328140920.2842153-1-arnd@arndb.de
Cc: stable@vger.kernel.org
Fixes:
Arnd Bergmann
authored and
Steven Rostedt (VMware)
commited |
cf4d418e65 | |
Gaurav reports that commit: 
Peter Zijlstra
authored and
 Ingo Molnar
commited |
1cef1150ef | |
When a cfs_rq is throttled, parent cfs_rq->nr_running is decreased and
everything happens at cfs_rq level. Currently util_est stays unchanged
in such case and it keeps accounting the utilization of throttled tasks.
This can somewhat make sense as we don't dequeue tasks but only throttled
cfs_rq.
If a task of another group is enqueued/dequeued and root cfs_rq becomes
idle during the dequeue, util_est will be cleared whereas it was
accounting util_est of throttled tasks before. So the behavior of util_est
is not always the same regarding throttled tasks and depends of side
activity. Furthermore, util_est will not be updated when the cfs_rq is
unthrottled as everything happens at cfs_rq level. Main results is that
util_est will stay null whereas we now have running tasks. We have to wait
for the next dequeue/enqueue of the previously throttled tasks to get an
up to date util_est.
Remove the assumption that cfs_rq's estimated utilization of a CPU is 0
if there is no running task so the util_est of a task remains until the
latter is dequeued even if its cfs_rq has been throttled.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
Vincent Guittot
authored and
Ingo Molnar
commited |
3482d98bbc | |
When period gets restarted after some idle time, start_cfs_bandwidth() doesn't update the expiration information, expire_cfs_rq_runtime() will see cfs_rq->runtime_expires smaller than rq clock and go to the clock drift logic, wasting needless CPU cycles on the scheduler hot path. Update the global expiration in start_cfs_bandwidth() to avoid frequent expire_cfs_rq_runtime() calls once a new period begins. Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ben Segall <bsegall@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180620101834.24455-2-xlpang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Xunlei Pang
authored and
Ingo Molnar
commited |
f1d1be8aee | |
I noticed that cgroup task groups constantly get throttled even
if they have low CPU usage, this causes some jitters on the response
time to some of our business containers when enabling CPU quotas.
It's very simple to reproduce:
mkdir /sys/fs/cgroup/cpu/test
cd /sys/fs/cgroup/cpu/test
echo 100000 > cpu.cfs_quota_us
echo $$ > tasks
then repeat:
cat cpu.stat | grep nr_throttled # nr_throttled will increase steadily
After some analysis, we found that cfs_rq::runtime_remaining will
be cleared by expire_cfs_rq_runtime() due to two equal but stale
"cfs_{b|q}->runtime_expires" after period timer is re-armed.
The current condition to judge clock drift in expire_cfs_rq_runtime()
is wrong, the two runtime_expires are actually the same when clock
drift happens, so this condtion can never hit. The orginal design was
correctly done by this commit:
Xunlei Pang
authored and
Ingo Molnar
commited |
512ac999d2 | |
With commit:
Vincent Guittot
authored and
Ingo Molnar
commited |
296b2ffe7f | |
Some people have reported that the warning in sched_tick_remote() occasionally triggers, especially in favour of some RCU-Torture pressure: WARNING: CPU: 11 PID: 906 at kernel/sched/core.c:3138 sched_tick_remote+0xb6/0xc0 Modules linked in: CPU: 11 PID: 906 Comm: kworker/u32:3 Not tainted 4.18.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: events_unbound sched_tick_remote RIP: 0010:sched_tick_remote+0xb6/0xc0 Code: e8 0f 06 b8 00 c6 03 00 fb eb 9d 8b 43 04 85 c0 75 8d 48 8b 83 e0 0a 00 00 48 85 c0 75 81 eb 88 48 89 df e8 bc fe ff ff eb aa <0f> 0b eb +c5 66 0f 1f 44 00 00 bf 17 00 00 00 e8 b6 2e fe ff 0f b6 Call Trace: process_one_work+0x1df/0x3b0 worker_thread+0x44/0x3d0 kthread+0xf3/0x130 ? set_worker_desc+0xb0/0xb0 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 This happens when the remote tick applies on an idle task. Usually the idle_cpu() check avoids that, but it is performed before we lock the runqueue and it is therefore racy. It was intended to be that way in order to prevent from useless runqueue locks since idle task tick callback is a no-op. Now if the racy check slips out of our hands and we end up remotely ticking an idle task, the empty task_tick_idle() is harmless. Still it won't pass the WARN_ON_ONCE() test that ensures rq_clock_task() is not too far from curr->se.exec_start because update_curr_idle() doesn't update the exec_start value like other scheduler policies. Hence the reported false positive. So let's have another check, while the rq is locked, to make sure we don't remote tick on an idle task. The lockless idle_cpu() still applies to avoid unecessary rq lock contention. Reported-by: Jacek Tomaka <jacekt@dug.com> Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reported-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1530203381-31234-1-git-send-email-frederic@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Frederic Weisbecker
authored and
Ingo Molnar
commited |
d9c0ffcabd | |
Pull networking fixes from David Miller:
1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.
2) Need to bump memory lock rlimit for test_sockmap bpf test, from
Yonghong Song.
3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.
4) Fix uninitialized read in nf_log, from Jann Horn.
5) Fix raw command length parsing in mlx5, from Alex Vesker.
6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
Varadhan.
7) Fix regressions in FIB rule matching during create, from Jason A.
Donenfeld and Roopa Prabhu.
8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.
9) More bpfilter build fixes/adjustments from Masahiro Yamada.
10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
Dangaard Brouer.
11) fib_tests.sh file permissions were broken, from Shuah Khan.
12) Make sure BH/preemption is disabled in data path of mac80211, from
Denis Kenzior.
13) Don't ignore nla_parse_nested() return values in nl80211, from
Johannes berg.
14) Properly account sock objects ot kmemcg, from Shakeel Butt.
15) Adjustments to setting bpf program permissions to read-only, from
Daniel Borkmann.
16) TCP Fast Open key endianness was broken, it always took on the host
endiannness. Whoops. Explicitly make it little endian. From Yuching
Cheng.
17) Fix prefix route setting for link local addresses in ipv6, from
David Ahern.
18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.
19) Various bpf sockmap fixes, from John Fastabend.
20) Use after free for GRO with ESP, from Sabrina Dubroca.
21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
Eric Biggers.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
qede: Adverstise software timestamp caps when PHC is not available.
qed: Fix use of incorrect size in memcpy call.
qed: Fix setting of incorrect eswitch mode.
qed: Limit msix vectors in kdump kernel to the minimum required count.
ipvlan: call dev_change_flags when ipvlan mode is reset
ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
net: fix use-after-free in GRO with ESP
tcp: prevent bogus FRTO undos with non-SACK flows
bpf: sockhash, add release routine
bpf: sockhash fix omitted bucket lock in sock_close
bpf: sockmap, fix smap_list_map_remove when psock is in many maps
bpf: sockmap, fix crash when ipv6 sock is added
net: fib_rules: bring back rule_exists to match rule during add
hv_netvsc: split sub-channel setup into async and sync
net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
atm: zatm: Fix potential Spectre v1
s390/qeth: consistently re-enable device features
s390/qeth: don't clobber buffer on async TX completion
s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
s390/qeth: fix race when setting MAC address
...
Linus Torvalds
commited |
4e33d7d479 | |
-----BEGIN PGP SIGNATURE----- iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAls4b+ILHGhjaEBsc3Qu ZGUACgkQD55TZVIEUYNrVw//SiXXoTDekxaQmyExQcEhac4ZzTjERoDFaE9zo14D x7iwdOXFQN9pRJwtUX70QDxQxc8iJT1j6CXMRUJZL9ZKdEOVbqfX2k7P8W4TJkhU id2PeZTxmreWOKL8EJB1mEjckZxP/qQLKBp9qwNET6rPf18WmSDb6wQuUcaLgDhl n4UJrzXuiCaEQNor30BvGDM4jQ4IOFh2JVjWqwPubcgPgOoopZ0TWSPeAxRo38MH 2hDTSMFEV/QqM/slDhHxJacwFyMc2mWxyHg66/YGzTmX/ZciABq2eMiTwhSMumSp wDP/4/9TvaM6QGPkWblTFr18sRECBaNo59e5Lz0g/KtJCXwIeAiBqCKaIct6CYAf hHdSaxvYzPgIOs91uSgGbhtlweg3TdjSRJIbB8k1xkub7uAnT0hpeHnqPy4DUfjy DB25YTt0Qabnmfyz37UpbCQN0PPYY4TLvZc9N81WXiKW2BOIogvNeiCNbS06rvXa wxn/haocbMSbh3k41jxbkrFBKiALiz1QaZRgH0omdOvXSN//WgI8qAt6F8begDc8 dBu5aTu50oDv6kLoe4aONTH72Jrt/q6xBI9dN5cD73luBm1p+QyoYhekHUPNMef7 7ek/lBJLo1Xq+bEuqgnaPZRC7mWYGTvnEe+r0uYW3cOw+PGx/VNfPc6B43J/YaCS Hv4= =IUWC -----END PGP SIGNATURE----- Merge tag 'dma-mapping-4.18-2' of git://git.infradead.org/users/hch/dma-mapping Pull dma mapping fixlet from Christoph Hellwig: "Add a missing export required by riscv and unicore" * tag 'dma-mapping-4.18-2' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: export swiotlb_dma_ops
Linus Torvalds
commited |
c350d6d1d7 | |
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-01 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) A bpf_fib_lookup() helper fix to change the API before freeze to return an encoding of the FIB lookup result and return the nexthop device index in the params struct (instead of device index as return code that we had before), from David. 2) Various BPF JIT fixes to address syzkaller fallout, that is, do not reject progs when set_memory_*() fails since it could still be RO. Also arm32 JIT was not using bpf_jit_binary_lock_ro() API which was an issue, and a memory leak in s390 JIT found during review, from Daniel. 3) Multiple fixes for sockmap/hash to address most of the syzkaller triggered bugs. Usage with IPv6 was crashing, a GPF in bpf_tcp_close(), a missing sock_map_release() routine to hook up to callbacks, and a fix for an omitted bucket lock in sock_close(), from John. 4) Two bpftool fixes to remove duplicated error message on program load, and another one to close the libbpf object after program load. One additional fix for nfp driver's BPF offload to avoid stopping offload completely if replace of program failed, from Jakub. 5) Couple of BPF selftest fixes that bail out in some of the test scripts if the user does not have the right privileges, from Jeffrin. 6) Fixes in test_bpf for s390 when CONFIG_BPF_JIT_ALWAYS_ON is set where we need to set the flag that some of the test cases are expected to fail, from Kleber. 7) Fix to detangle BPF_LIRC_MODE2 dependency from CONFIG_CGROUP_BPF since it has no relation to it and lirc2 users often have configs without cgroups enabled and thus would not be able to use it, from Sean. 8) Fix a selftest failure in sockmap by removing a useless setrlimit() call that would set a too low limit where at the same time we are already including bpf_rlimit.h that does the job, from Yonghong. 9) Fix BPF selftest config with missing missing NET_SCHED, from Anders. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> 
David S. Miller
commited |
271b955e52 | |
Add map_release_uref pointer to hashmap ops. This was dropped when
original sockhash code was ported into bpf-next before initial
commit.
Fixes:
John Fastabend
authored and
 Daniel Borkmann
commited |
caac76a517 | |
First the sk_callback_lock() was being used to protect both the
sock callback hooks and the psock->maps list. This got overly
convoluted after the addition of sockhash (in sockmap it made
some sense because masp and callbacks were tightly coupled) so
lets split out a specific lock for maps and only use the callback
lock for its intended purpose. This fixes a couple cases where
we missed using maps lock when it was in fact needed. Also this
makes it easier to follow the code because now we can put the
locking closer to the actual code its serializing.
Next, in sock_hash_delete_elem() the pattern was as follows,
sock_hash_delete_elem()
[...]
spin_lock(bucket_lock)
l = lookup_elem_raw()
if (l)
hlist_del_rcu()
write_lock(sk_callback_lock)
.... destroy psock ...
write_unlock(sk_callback_lock)
spin_unlock(bucket_lock)
The ordering is necessary because we only know the {p}sock after
dereferencing the hash table which we can't do unless we have the
bucket lock held. Once we have the bucket lock and the psock element
it is deleted from the hashmap to ensure any other path doing a lookup
will fail. Finally, the refcnt is decremented and if zero the psock
is destroyed.
In parallel with the above (or free'ing the map) a tcp close event
may trigger tcp_close(). Which at the moment omits the bucket lock
altogether (oops!) where the flow looks like this,
bpf_tcp_close()
[...]
write_lock(sk_callback_lock)
for each psock->maps // list of maps this sock is part of
hlist_del_rcu(ref_hash_node);
.... destroy psock ...
write_unlock(sk_callback_lock)
Obviously, and demonstrated by syzbot, this is broken because
we can have multiple threads deleting entries via hlist_del_rcu().
To fix this we might be tempted to wrap the hlist operation in a
bucket lock but that would create a lock inversion problem. In
summary to follow locking rules the psocks maps list needs the
sk_callback_lock (after this patch maps_lock) but we need the bucket
lock to do the hlist_del_rcu.
To resolve the lock inversion problem pop the head of the maps list
repeatedly and remove the reference until no more are left. If a
delete happens in parallel from the BPF API that is OK as well because
it will do a similar action, lookup the lock in the map/hash, delete
it from the map/hash, and dec the refcnt. We check for this case
before doing a destroy on the psock to ensure we don't have two
threads tearing down a psock. The new logic is as follows,
bpf_tcp_close()
e = psock_map_pop(psock->maps) // done with map lock
bucket_lock() // lock hash list bucket
l = lookup_elem_raw(head, hash, key, key_size);
if (l) {
//only get here if elmnt was not already removed
hlist_del_rcu()
... destroy psock...
}
bucket_unlock()
And finally for all the above to work add missing locking around map
operations per above. Then add RCU annotations and use
rcu_dereference/rcu_assign_pointer to manage values relying on RCU so
that the object is not free'd from sock_hash_free() while it is being
referenced in bpf_tcp_close().
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
Fixes:
John Fastabend
authored and
Daniel Borkmann
commited |
e9db4ef6bf | |
If a hashmap is free'd with open socks it removes the reference to
the hash entry from the psock. If that is the last reference to the
psock then it will also be free'd by the reference counting logic.
However the current logic that removes the hash reference from the
list of references is broken. In smap_list_remove() we first check
if the sockmap entry matches and then check if the hashmap entry
matches. But, the sockmap entry sill always match because its NULL in
this case which causes the first entry to be removed from the list.
If this is always the "right" entry (because the user adds/removes
entries in order) then everything is OK but otherwise a subsequent
bpf_tcp_close() may reference a free'd object.
To fix this create two list handlers one for sockmap and one for
sockhash.
Reported-by: syzbot+0ce137753c78f7b6acc1@syzkaller.appspotmail.com
Fixes:
John Fastabend
authored and
Daniel Borkmann
commited |
54fedb42c6 | |
This fixes a crash where we assign tcp_prot to IPv6 sockets instead
of tcpv6_prot.
Previously we overwrote the sk->prot field with tcp_prot even in the
AF_INET6 case. This patch ensures the correct tcp_prot and tcpv6_prot
are used.
Tested with 'netserver -6' and 'netperf -H [IPv6]' as well as
'netperf -H [IPv4]'. The ESTABLISHED check resolves the previously
crashing case here.
Fixes:
John Fastabend
authored and
Daniel Borkmann
commited |
9901c5d77e | |
Partially undo commit
Daniel Borkmann
authored and
 Alexei Starovoitov
commited |
85782e037f | |
For architectures that do not use per-device dma ops we need to export
the dma_map_ops structure returned from get_arch_dma_ops().
Fixes:
Christoph Hellwig
commited |
210d0797c9 | |
Fix non-fatal warning triggered during compilation with W=1: kernel/events/core.c:6106:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static void __always_inline ^~~~~~ Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180626202301.20270-1-malat@debian.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mathieu Malaterre
authored and
Ingo Molnar
commited |
9331510135 | |
If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not
possible to attach, detach or query IR BPF programs to /dev/lircN devices,
making them impossible to use. For embedded devices, it should be possible
to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled.
This change requires some refactoring, since bpf_prog_{attach,detach,query}
functions are now always compiled, but their code paths for cgroups need
moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c,
moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not
require #ifdefs since that is already conditionally compiled.
Fixes:
Sean Young
authored and
Daniel Borkmann
commited |
fdb5c4531c | |
Pull perf fixes from Thomas Gleixner:
"A pile of perf updates:
Kernel side:
- Remove an incorrect warning in uprobe_init_insn() when
insn_get_length() fails. The error return code is handled at the
call site.
- Move the inline keyword to the right place in the perf ringbuffer
code to address a W=1 build warning.
Tooling:
perf stat:
- Fix metric column header display alignment
- Improve error messages for default attributes, providing better
output for error in command line.
- Add --interval-clear option, to provide a 'watch' like printing
perf script:
- Show hw-cache events too
perf c2c:
- Fix data dependency problem in layout of 'struct c2c_hist_entry'
Core:
- Do not blindly assume that 'struct perf_evsel' can be obtained via
a straight forward container_of() as there are call sites which
hand in a plain 'struct hist' which is not part of a container.
- Fix error index in the PMU event parser, so that error messages can
point to the problematic token"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Move the inline keyword at the beginning of the function declaration
uprobes/x86: Remove incorrect WARN_ON() in uprobe_init_insn()
perf script: Show hw-cache events
perf c2c: Keep struct hist_entry at the end of struct c2c_hist_entry
perf stat: Add event parsing error handling to add_default_attributes
perf stat: Allow to specify specific metric column len
perf stat: Fix metric column header display alignment
perf stat: Use only color_fprintf call in print_metric_only
perf stat: Add --interval-clear option
perf tools: Fix error index for pmu event parser
perf hists: Reimplement hists__has_callchains()
perf hists browser gtk: Use hist_entry__has_callchains()
perf hists: Make hist_entry__has_callchains() work with 'perf c2c'
perf hists: Save the callchain_size in struct hist_entry
Linus Torvalds
commited |
c81b995f00 | |
Pull rseq fixes from Thomas Gleixer:
"A pile of rseq related fixups:
- Prevent infinite recursion when delivering SIGSEGV
- Remove the abort of rseq critical section on fork() as syscalls
inside rseq critical sections are explicitely forbidden. So no
point in doing the abort on the child.
- Align the rseq structure on 32 bytes in the ARM selftest code.
- Fix file permissions of the test script"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Avoid infinite recursion when delivering SIGSEGV
rseq/cleanup: Do not abort rseq c.s. in child on fork()
rseq/selftests/arm: Align 'struct rseq_cs' on 32 bytes
rseq/selftests: Make run_param_test.sh executable
Linus Torvalds
commited |
2ce413ec16 | |
Pull locking fixes from Thomas Gleixner:
"A set of fixes and updates for the locking code:
- Prevent lockdep from updating irq state within its own code and
thereby confusing itself.
- Buid fix for older GCCs which mistreat anonymous unions
- Add a missing lockdep annotation in down_read_non_onwer() which
causes up_read_non_owner() to emit a lockdep splat
- Remove the custom alpha dec_and_lock() implementation which is
incorrect in terms of ordering and use the generic one.
The remaining two commits are not strictly fixes. They provide irqsave
variants of atomic_dec_and_lock() and refcount_dec_and_lock(). These
are required to merge the relevant updates and cleanups into different
maintainer trees for 4.19, so routing them into mainline without
actual users is the sanest approach.
They should have been in -rc1, but last weekend I took the liberty to
just avoid computers in order to regain some mental sanity"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/qspinlock: Fix build for anonymous union in older GCC compilers
locking/lockdep: Do not record IRQ state within lockdep code
locking/rwsem: Fix up_read_non_owner() warning with DEBUG_RWSEMS
locking/refcounts: Implement refcount_dec_and_lock_irqsave()
atomic: Add irqsave variant of atomic_dec_and_lock()
alpha: Remove custom dec_and_lock() implementation
Linus Torvalds
commited |
2da2ca24a3 | |
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for time(r) related issues:
- Fix a long standing conversion issue in jiffies_to_msecs() for odd
HZ values like 1024 or 1200 which resulted in returning 0 for small
jiffies values due to rounding down.
- Use the proper CONFIG symbol in the new Y2038 safe compat code for
posix-timers. Not yet a visible breakage, but this will immediately
trigger when the architecture support for the new interfaces is
merged.
- Return an error code in the STM32 clocksource driver on failure
instead of success.
- Remove the redundant and stale irq disabled check in the posix cpu
timer code. The check is at the wrong place anyway and lockdep
already covers it via the sighand lock locking coverage"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Make sure jiffies_to_msecs() preserves non-zero time periods
posix-timers: Fix nanosleep_copyout() for CONFIG_COMPAT_32BIT_TIME
clocksource/drivers/stm32: Fix error return code
posix-cpu-timers: Remove lockdep_assert_irqs_disabled()
Linus Torvalds
commited |
6242258b6b | |
Pull irq fixes from Thomas Gleixner:
"A set of fixes mostly for the ARM/GIC world:
- Fix the MSI affinity handling in the ls-scfg irq chip driver so it
updates and uses the effective affinity mask correctly
- Prevent binding LPIs to offline CPUs and respect the Cavium erratum
which requires that LPIs which belong to an offline NUMA node are
not bound to a CPU on a different NUMA node.
- Free only the amount of allocated interrupts in the GIC-V2M driver
instead of trying to free log2(nrirqs).
- Prevent emitting SYNC and VSYNC targetting non existing interrupt
collections in the GIC-V3 ITS driver
- Ensure that the GIV-V3 interrupt redistributor is correctly
reprogrammed on CPU hotplug
- Remove a stale unused helper function"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdesc: Delete irq_desc_get_msi_desc()
irqchip/gic-v3-its: Fix reprogramming of redistributors on CPU hotplug
irqchip/gic-v3-its: Only emit VSYNC if targetting a valid collection
irqchip/gic-v3-its: Only emit SYNC if targetting a valid collection
irqchip/gic-v3-its: Don't bind LPI to unavailable NUMA node
irqchip/gic-v2m: Fix SPI release on error path
irqchip/ls-scfg-msi: Fix MSI affinity handling
genirq/debugfs: Add missing IRQCHIP_SUPPORTS_LEVEL_MSI debug
Linus Torvalds
commited |
78fea6334f | |
- A bad merge caused an "endif" to go in the wrong place in
scripts/Makefile.build
- Softirq tracing fix for tracing that corrupts lockdep and causes a false
splat
- Histogram documentation typo fixes
- Fix a bad memory reference when passing in no filter to the filter code
- Simplify code by using the swap macro instead of open coding the swap
-----BEGIN PGP SIGNATURE-----
iIkEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWy2gMBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsqWAPdmoudDVf9Wi+THEJzlZL7ZhfYSDQyi
A5Y3mc3iKoZeAQCq7PD7uH4Q1IMaVbAKG8OxvGVb69ijkMsSL4XxD33sAQ==
=U1V7
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains a few fixes and a clean up.
- a bad merge caused an "endif" to go in the wrong place in
scripts/Makefile.build
- softirq tracing fix for tracing that corrupts lockdep and causes a
false splat
- histogram documentation typo fixes
- fix a bad memory reference when passing in no filter to the filter
code
- simplify code by using the swap macro instead of open coding the
swap"
* tag 'trace-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount
tracing: Fix some errors in histogram documentation
tracing: Use swap macro in update_max_tr
softirq: Reorder trace_softirqs_on to prevent lockdep splat
tracing: Check for no filter when processing event filters
Linus Torvalds
commited |
81f9c4e417 | |
When delivering a signal to a task that is using rseq, we call into __rseq_handle_notify_resume() so that the registers pushed in the sigframe are updated to reflect the state of the restartable sequence (for example, ensuring that the signal returns to the abort handler if necessary). However, if the rseq management fails due to an unrecoverable fault when accessing userspace or certain combinations of RSEQ_CS_* flags, then we will attempt to deliver a SIGSEGV. This has the potential for infinite recursion if the rseq code continuously fails on signal delivery. Avoid this problem by using force_sigsegv() instead of force_sig(), which is explicitly designed to reset the SEGV handler to SIG_DFL in the case of a recursive fault. In doing so, remove rseq_signal_deliver() from the internal rseq API and have an optional struct ksignal * parameter to rseq_handle_notify_resume() instead. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: peterz@infradead.org Cc: paulmck@linux.vnet.ibm.com Cc: boqun.feng@gmail.com Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com 
Will Deacon
authored and
Thomas Gleixner
commited |
784e0300fe | |
For the common cases where 1000 is a multiple of HZ, or HZ is a multiple of 1000, jiffies_to_msecs() never returns zero when passed a non-zero time period. However, if HZ > 1000 and not an integer multiple of 1000 (e.g. 1024 or 1200, as used on alpha and DECstation), jiffies_to_msecs() may return zero for small non-zero time periods. This may break code that relies on receiving back a non-zero value. jiffies_to_usecs() does not need such a fix: one jiffy can only be less than one µs if HZ > 1000000, and such large values of HZ are already rejected at build time, twice: - include/linux/jiffies.h does #error if HZ >= 12288, - kernel/time/time.c has BUILD_BUG_ON(HZ > USEC_PER_SEC). Broken since forever. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-alpha@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180622143357.7495-1-geert@linux-m68k.org 
Geert Uytterhoeven
authored and
Thomas Gleixner
commited |
abcbcb80cd | |
Debug is missing the IRQCHIP_SUPPORTS_LEVEL_MSI debug entry, making debugfs
slightly less useful.
Take this opportunity to also add a missing comment in the definition of
IRQCHIP_SUPPORTS_LEVEL_MSI.
Fixes:
Marc Zyngier
authored and
Thomas Gleixner
commited |
72a8edc2d9 | |
When building perf with W=1 the following warning triggers: CC kernel/events/ring_buffer.o kernel/events/ring_buffer.c:105:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] static bool __always_inline ^~~~~~ ... Move the inline keyword to the beginning of the function declaration. Signed-off-by: Mathieu Malaterre <malat@debian.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: trival@kernel.org Link: http://lkml.kernel.org/r/20180308202856.9378-1-malat@debian.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mathieu Malaterre
authored and
Ingo Molnar
commited |
57d6a7938a | |
Make use of the swap macro and remove unnecessary variable _buf_. This makes the code easier to read and maintain. Also, reduces the stack usage. This code was detected with the help of Coccinelle. Link: http://lkml.kernel.org/r/20180209175316.GA18720@embeddedgus Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> 
Gustavo A. R. Silva
authored and
Steven Rostedt (VMware)
commited |
08ae88f810 | |
I'm able to reproduce a lockdep splat with config options:
CONFIG_PROVE_LOCKING=y,
CONFIG_DEBUG_LOCK_ALLOC=y and
CONFIG_PREEMPTIRQ_EVENTS=y
$ echo 1 > /d/tracing/events/preemptirq/preempt_enable/enable
[ 26.112609] DEBUG_LOCKS_WARN_ON(current->softirqs_enabled)
[ 26.112636] WARNING: CPU: 0 PID: 118 at kernel/locking/lockdep.c:3854
[...]
[ 26.144229] Call Trace:
[ 26.144926] <IRQ>
[ 26.145506] lock_acquire+0x55/0x1b0
[ 26.146499] ? __do_softirq+0x46f/0x4d9
[ 26.147571] ? __do_softirq+0x46f/0x4d9
[ 26.148646] trace_preempt_on+0x8f/0x240
[ 26.149744] ? trace_preempt_on+0x4d/0x240
[ 26.150862] ? __do_softirq+0x46f/0x4d9
[ 26.151930] preempt_count_sub+0x18a/0x1a0
[ 26.152985] __do_softirq+0x46f/0x4d9
[ 26.153937] irq_exit+0x68/0xe0
[ 26.154755] smp_apic_timer_interrupt+0x271/0x280
[ 26.156056] apic_timer_interrupt+0xf/0x20
[ 26.157105] </IRQ>
The issue was this:
preempt_count = 1 << SOFTIRQ_SHIFT
__local_bh_enable(cnt = 1 << SOFTIRQ_SHIFT) {
if (softirq_count() == (cnt && SOFTIRQ_MASK)) {
trace_softirqs_on() {
current->softirqs_enabled = 1;
}
}
preempt_count_sub(cnt) {
trace_preempt_on() {
tracepoint() {
rcu_read_lock_sched() {
// jumps into lockdep
Where preempt_count still has softirqs disabled, but
current->softirqs_enabled is true, and we get a splat.
Link: http://lkml.kernel.org/r/20180607201143.247775-1-joel@joelfernandes.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Glexiner <tglx@linutronix.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Todd Kjos <tkjos@google.com>
Cc: Erick Reyes <erickreyes@google.com>
Cc: Julia Cartwright <julia@ni.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: stable@vger.kernel.org
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fixes:
Joel Fernandes (Google)
authored and
Steven Rostedt (VMware)
commited |
1a63dcd876 | |
The syzkaller detected a out-of-bounds issue with the events filter code,
specifically here:
prog[N].pred = NULL; /* #13 */
prog[N].target = 1; /* TRUE */
prog[N+1].pred = NULL;
prog[N+1].target = 0; /* FALSE */
-> prog[N-1].target = N;
prog[N-1].when_to_branch = false;
As that's the first reference to a "N-1" index, it appears that the code got
here with N = 0, which means the filter parser found no filter to parse
(which shouldn't ever happen, but apparently it did).
Add a new error to the parsing code that will check to make sure that N is
not zero before going into this part of the code. If N = 0, then -EINVAL is
returned, and a error message is added to the filter.
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
commited |
70303420b5 | |
While debugging where things were going wrong with mapping enabling/disabling interrupts with the lockdep state and actual real enabling and disabling interrupts, I had to silent the IRQ disabling/enabling in debug_check_no_locks_freed() because it was always showing up as it was called before the splat was. Use raw_local_irq_save/restore() for not only debug_check_no_locks_freed() but for all internal lockdep functions, as they hide useful information about where interrupts were used incorrectly last. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/lkml/20180404140630.3f4f4c7a@gandalf.local.home Signed-off-by: Ingo Molnar <mingo@kernel.org>
Steven Rostedt (VMware)
authored and
Ingo Molnar
commited |
fcc784be83 |