mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-11-20 08:32:36 +07:00
| Message | SHA1 | |
|---|---|---|
x86, apic: Remove multi_timer_check callback
Since commit
|
e76661ba09 | |
x86, irq: Clean up irqdomain transition code
Now we have completely switched to irqdomain, so clean up transition code in IOAPIC drivers. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-43-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
b81975eade | |
x86, irq: Introduce helper functions to release IOAPIC pin
Introduce function mp_unmap_irq() to release IOAPIC IRQ when IRQ is not used any more, which will typically called by pcibios_disabled_irq. And function mp_irqdomain_unmap() is a common implementation of irq_domain_ops.unmap for IOAPIC. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-38-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
df334bead7 | |
x86, irq: Simplify the way to handle ISA IRQ
On startup, setup_IO_APIC_irqs() will program all IOAPIC pins for ISA IRQs. Later when mp_map_pin_to_irq() is called, it just returns ISA IRQ number without programming corresponding IOAPIC pin. This patch consolidates the way to program IOAPIC pins for both ISA and non-ISA IRQs into mp_map_pin_to_irq() as below: 1) For ISA IRQs, mp_irqs array is used to map IOAPIC pin to IRQ and mp_irqdomain_map() is used to actually program the pin. 2) For non-ISA IRQs, irqdomain is used to map IOAPIC pin to IRQ, and mp_irqdomain_map() is also used to actually program the pin. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Link: http://lkml.kernel.org/r/1402302011-23642-36-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
16ee7b3dcc | |
x86, irq: Clean up unused IOAPIC interface
Now we have converted all x86 platforms to use the common irqdomain map interface. There's no caller of io_apic_set_pci_routing(), setup_IO_APIC_irq_extra() and io_apic_setup_irq_pin_once() any more, so kill them. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-35-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
9f354b0252 | |
x86, irq: Introduce two helper functions to support irqdomain map operation
Currently there are multiple entries to program IOAPIC pins, such as io_apic_setup_irq_pin_once(), io_apic_set_pci_routing() and setup_IO_APIC_irq_extra() etc. This patch introduces two functions to help consolidate the code to program IOAPIC pins. Function mp_set_pin_attr() is used to optionally set trigger, polarity and NUMA node property for an IOAPIC pin. If mp_set_pin_attr() is not invoked for a pin, the default configuration from BIOS will be used. Function mp_irqdomain_map() is an common implementation of irqdomain map() operation. It figures out attribures for pin and then actually programs the IOAPIC pin. We hope this will be the only entrance for programming IOAPIC pin. And the flow will: 1) caller such as xxx_pci_irq_enable figures out pin attributes. 2) Invoke mp_set_pin_attr() to set attributes for a pin. If the pin has already bin programmed, mp_set_pin_attr() will aslo detects attribute confictions. 3) Invoke mp_map_pin_to_irq() 3.1) If IRQ has already been assigned, return irq_find_mapping() 3.2) Else irq_create_mapping() ->irq_domain_associate() ->mp_irqdomain_map() ->io_apic_setup_irq_pin() So every pin will only programmed once by mp_irqdomain_map(), so we could kill io_apic_setup_irq_pin_once(), io_apic_set_pci_routing() and setup_IO_APIC_irq_extra() etc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-30-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
15a3c7cc91 | |
x86, irq: Enhance mp_register_ioapic() to support irqdomain
Enhance function mp_register_ioapic() to support irqdomain. When registering IOAPIC, caller may provide callbacks and parameters for creating irqdomain. The IOAPIC core will create irqdomain later if caller has passed in corresponding parameters. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: sfi-devel@simplefirmware.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Lindgren <tony@atomide.com> Link: http://lkml.kernel.org/r/1402302011-23642-25-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
44767bfaae | |
x86, irq: Introduce mechanisms to support dynamically allocate IRQ for IOAPIC
Currently x86 support identity mapping between GSI(IOAPIC pin) and IRQ number, so continous IRQs at low end are statically allocated to IOAPICs at boot time. This design causes trouble to support IOAPIC hotplug. This patch implements basic mechanism to dynamically allocate IRQ on demand for IOAPIC pins by using irqdomain framework. It first adds several fields into struct ioapic to support irqdomain. Then it implements an algorithm to dynamically allocate IRQ number for IOAPIC pins on demand. Currently it supports three types of irqdomain: 1) LEGACY: used to support IOAPIC hosting legacy IRQs and building identity mapping for legacy IRQs. A speical case, we dynamically allocate IRQ number for IOAPIC pin which has GSI number below nr_legacy_irqs() but isn't legacy IRQ. This is for backward compatibility and avoid regression. 2) STRICT: build identity mapping between GSI and IRQ nubmer. 3) DYNAMIC: dynamically allocate IRQ number for IOAPIC pin on demand. Legacy(ISA) IRQs is not managed by irqdomain because there may be multiple pins sharing the same IRQ number and current irqdomain only supports 1:1 mapping between pins and IRQ. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Link: http://lkml.kernel.org/r/1402302011-23642-24-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
d7f3d47818 | |
x86, ACPI, irq: Consolidate algorithm of mapping (ioapic, pin) to IRQ number
Currently ACPI and ioapic both implement algorithms to map (ioapic, pin) to IRQ number. So consolidate the common part into one place, which is also preparing for irqdomain support. It introduces mp_map_gsi_to_irq(), which will be used to allocate IRQ number IOAPIC pins when irqdomain is enabled. Also rename gsi_to_irq() to map_gsi_to_irq(), later we will introduce unmap_gsi_to_irq() when enabling IOAPIC hotplug. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Link: http://lkml.kernel.org/r/1402380812-32446-1-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
6b9fb70824 | |
x86, irq: Simplify arch_early_irq_init()
Simplify function arch_early_irq_init() and kill static array irq_cfgx[]. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-21-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
4b92b4f754 | |
x86, irq: Count legacy IRQs by legacy_pic->nr_legacy_irqs instead of NR_IRQS_LEGACY
Some platforms, such as Intel MID and mshypv, do not support legacy interrupt controllers. So count legacy IRQs by legacy_pic->nr_legacy_irqs instead of hard-coded NR_IRQS_LEGACY. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: xen-devel@lists.xenproject.org Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Tony Lindgren <tony@atomide.com> Acked-by: David Vrabel <david.vrabel@citrix.com> Link: http://lkml.kernel.org/r/1402302011-23642-20-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
95d76acc75 | |
x86, irq: Introduce some helper utilities to improve readability
It also fixes an off by one bug in if ((ioapic_idx > 0) && (irq > NR_IRQS_LEGACY)) It should be if ((ioapic_idx > 0) && (irq >= NR_IRQS_LEGACY)) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-17-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
18e4855186 | |
x86, irq: Reorganize IO_APIC_get_PCI_irq_vector() to prepare for irqdomain
Reorganize function IO_APIC_get_PCI_irq_vector() a bit to better support coming irqdomain. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-16-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
79598505ae | |
x86, ioapic: Use irq_cfg() instead of irq_get_chip_data() for better readability
Use defined helper function irq_cfg() instead of irq_get_chip_data() for better readability. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-15-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
32f5ef5d8d | |
x86, ioapic: Introduce helper utilities to walk ioapics and pins
Introduce helper utilities for_each_ioapic(), for_each_ioapic_reverse(), for_each_pin() and for_each_ioapic_pin() to walk ioapics and pins. They will be rewritten e will rewrite later to support IOAPIC hotplug. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-14-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
f44d169296 | |
x86, ioapic: Kill static variable nr_irqs_gsi
Static variable nr_irqs_gsi is used to maintain the lowest dynamic allocatable IRQ number. It may cause trouble when enabling dynamic IRQ allocation for IOAPIC, so use arch_dynirq_lower_bound() to avoid directly accessing nr_irqs_gsi and kill nr_irqs_gsi. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-13-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
518b2c63fc | |
x86, ioapic: Kill unused global variable timer_through_8259
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-12-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
4035ed0134 | |
x86, irq, trivial: Minor improvements of IRQ related code
1) Kill unused MAX_HARDIRQS_PER_CPU. 2) Improve function prototype declararions. 3) Simple typo fix, change "gsit" to "gsi". 4) Use macro VECTOR_UNDEFINED instead of hard-coded -1. 5) Kill redundant comments. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiri Kosina <trivial@kernel.org> Link: http://lkml.kernel.org/r/1402302011-23642-11-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
3eb2be5f49 | |
Merge branch 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq fixes from Ingo Molnar: "Two changes: a cpu-hotplug/irq race fix, plus a HyperV related fix" * 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Fix fixup_irqs() error handling x86, irq, pic: Probe for legacy PIC and set legacy_pic appropriately |
71998d1be4 | |
x86, irq: Remove pointless irq_reserve_irqs() call
That's a leftover from the time where x86 supported SPARSE_IRQ=n. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140507154338.967285614@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
18a67d32c3 | |
x86: Remove create/destroy_irq()
No more users. Remove the cruft Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140507154336.760446122@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
54859f59fc | |
x86: Get rid of get_nr_irqs_gsi()
No need to expose this outside of the ioapic code. The dynamic
allocations are guaranteed not to happen in the gsi space. See commit
|
d07c9f1875 | |
x86: ioapic: Use irq_alloc/free_hwirq()
No functional change just less crap. This does not replace the requirement to move x86 to irq domains, but it limits the mess to some degree. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140507154335.749579081@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
be47be6c28 | |
x86: Implement arch_setup/teardown_hwirq()
This is just a cleanup to get rid of the create/destroy_irq variants which were designed in hell. The long term solution for x86 is to switch over to irq domains and cleanup the whole vector allocation mess. The generic irq_alloc_hwirqs() interface deliberately prevents multi-MSI vector allocation to further enforce the irq domain conversion (aside of the desire to support ioapic hotplug). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20140507154334.482904047@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
b1ee544174 | |
asmlinkage, x86: Add explicit __visible to arch/x86/*
As requested by Linus add explicit __visible to the asmlinkage users. This marks all functions visible to assembler. Tree sweep for arch/x86/* Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1398984278-29319-3-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
2605fc216f | |
genirq: x86: Ensure that dynamic irq allocation does not conflict
On x86 the allocation of irq descriptors may allocate interrupts which are in the range of the GSI interrupts. That's wrong as those interrupts are hardwired and we don't have the irq domain translation like PPC. So one of these interrupts can be hooked up later to one of the devices which are hard wired to it and the io_apic init code for that particular interrupt line happily reuses that descriptor with a completely different configuration so hell breaks lose. Inside x86 we allocate dynamic interrupts from above nr_gsi_irqs, except for a few usage sites which have not yet blown up in our face for whatever reason. But for drivers which need an irq range, like the GPIO drivers, we have no limit in place and we don't want to expose such a detail to a driver. To cure this introduce a function which an architecture can implement to impose a lower bound on the dynamic interrupt allocations. Implement it for x86 and set the lower bound to nr_gsi_irqs, which is the end of the hardwired interrupt space, so all dynamic allocations happen above. That not only allows the GPIO driver to work sanely, it also protects the bogus callsites of create_irq_nr() in hpet, uv, irq_remapping and htirq code. They need to be cleaned up as well, but that's a separate issue. Reported-by: Jin Yao <yao.jin@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Krogerus Heikki <heikki.krogerus@intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1404241617360.28206@ionos.tec.linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
62a08ae2a5 | |
x86/irq: Fix fixup_irqs() error handling
Several patches to fix cpu hotplug and the down'd cpu's irq relocations have been submitted in the past month or so. The patches should resolve the problems with cpu hotplug and irq relocation, however, there is always a possibility that a bug still exists. The big problem with debugging these irq reassignments is that the cpu down completes and then we get random stack traces from drivers for which irqs have not been properly assigned to a new cpu. The stack traces are a mix of storage, network, and other kernel subsystem (I once saw the serial port stop working ...) warnings and failures. The problem with these failures is that they are difficult to diagnose. There is no warning in the cpu hotplug down path to indicate that an IRQ has failed to be assigned to a new cpu, and all we are left with is a stack trace from a driver, or a non-functional device. If we had some information on the console debugging these situations would be much easier; after all we can map an IRQ to a device by simply using lspci or /proc/interrupts. The current code, fixup_irqs(), which migrates IRQs from the down'd cpu and is called close to the end of the cpu down path, calls chip->set_irq_affinity which eventually calls __assign_irq_vector(). Errors are not propogated back from this function call and this results in silent irq relocation failures. This patch fixes this issue by returning the error codes up the call stack and prints out a warning if there is a relocation failure. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rui Wang <rui.y.wang@intel.com> Cc: Liu Ping Fan <kernelfans@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Steven Rostedt (Red Hat) <rostedt@goodmis.org> Cc: Li Fei <fei.li@intel.com> Cc: gong.chen@linux.intel.com Link: http://lkml.kernel.org/r/1396440673-18286-1-git-send-email-prarit@redhat.com [ Made small cleanliness tweaks. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
fb24da8057 | |
ACPI and power management updates for 3.14-rc1
- ACPI core changes to make it create a struct acpi_device object for every
device represented in the ACPI tables during all namespace scans regardless
of the current status of that device. In accordance with this, ACPI hotplug
operations will not delete those objects, unless the underlying ACPI tables
go away.
- On top of the above, new sysfs attribute for ACPI device objects allowing
user space to check device status by triggering the execution of _STA for
its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating the
PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the code
"glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for the
DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug
facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization earlier.
That should allow us to use ACPI during the timekeeping initialization
and possibly to simplify the EFI initialization too. From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over from
Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in drivers
that uses _DSM to execute it via the new helper. From Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo,
Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria,
Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support, from
Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias,
Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled
during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa,
Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a cpupower
tool cleanup from One Thousand Gnomes.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=dRf6
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"As far as the number of commits goes, the top spot belongs to ACPI
this time with cpufreq in the second position and a handful of PM
core, PNP and cpuidle updates. They are fixes and cleanups mostly, as
usual, with a couple of new features in the mix.
The most visible change is probably that we will create struct
acpi_device objects (visible in sysfs) for all devices represented in
the ACPI tables regardless of their status and there will be a new
sysfs attribute under those objects allowing user space to check that
status via _STA.
Consequently, ACPI device eject or generally hot-removal will not
delete those objects, unless the table containing the corresponding
namespace nodes is unloaded, which is extremely rare. Also ACPI
container hotplug will be handled quite a bit differently and cpufreq
will support CPU boost ("turbo") generically and not only in the
acpi-cpufreq driver.
Specifics:
- ACPI core changes to make it create a struct acpi_device object for
every device represented in the ACPI tables during all namespace
scans regardless of the current status of that device. In
accordance with this, ACPI hotplug operations will not delete those
objects, unless the underlying ACPI tables go away.
- On top of the above, new sysfs attribute for ACPI device objects
allowing user space to check device status by triggering the
execution of _STA for its ACPI object. From Srinivas Pandruvada.
- ACPI core hotplug changes reducing code duplication, integrating
the PCI root hotplug with the core and reworking container hotplug.
- ACPI core simplifications making it use ACPI_COMPANION() in the
code "glueing" ACPI device objects to "physical" devices.
- ACPICA update to upstream version 20131218. This adds support for
the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves
debug facilities. From Bob Moore, Lv Zheng and Betty Dall.
- Init code change to carry out the early ACPI initialization
earlier. That should allow us to use ACPI during the timekeeping
initialization and possibly to simplify the EFI initialization too.
From Chun-Yi Lee.
- Clenups of the inclusions of ACPI headers in many places all over
from Lv Zheng and Rashika Kheria (work in progress).
- New helper for ACPI _DSM execution and rework of the code in
drivers that uses _DSM to execute it via the new helper. From
Jiang Liu.
- New Win8 OSI blacklist entries from Takashi Iwai.
- Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun
Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava,
Rashika Kheria, Tang Chen, Zhang Rui.
- intel_pstate driver updates, including proper Baytrail support,
from Dirk Brandewie and intel_pstate documentation from Ramkumar
Ramachandra.
- Generic CPU boost ("turbo") support for cpufreq from Lukasz
Majewski.
- powernow-k6 cpufreq driver fixes from Mikulas Patocka.
- cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark
Brown.
- Assorted cpufreq drivers fixes and cleanups from Anson Huang, John
Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh
Kumar.
- cpuidle cleanups from Bartlomiej Zolnierkiewicz.
- Support for hibernation APM events from Bin Shi.
- Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC
disabled during thaw transitions from Bjørn Mork.
- PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf
Hansson.
- PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente
Kurusa, Rashika Kheria.
- New tool for profiling system suspend from Todd E Brandt and a
cpupower tool cleanup from One Thousand Gnomes"
* tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits)
thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412)
cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ
Documentation: cpufreq / boost: Update BOOST documentation
cpufreq: exynos: Extend Exynos cpufreq driver to support boost
cpufreq / boost: Kconfig: Support for software-managed BOOST
acpi-cpufreq: Adjust the code to use the common boost attribute
cpufreq: Add boost frequency support in core
intel_pstate: Add trace point to report internal state.
cpufreq: introduce cpufreq_generic_get() routine
ARM: SA1100: Create dummy clk_get_rate() to avoid build failures
cpufreq: stats: create sysfs entries when cpufreq_stats is a module
cpufreq: stats: free table and remove sysfs entry in a single routine
cpufreq: stats: remove hotplug notifiers
cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly
cpufreq: speedstep: remove unused speedstep_get_state
platform: introduce OF style 'modalias' support for platform bus
PM / tools: new tool for suspend/resume performance optimization
ACPI: fix module autoloading for ACPI enumerated devices
ACPI: add module autoloading support for ACPI enumerated devices
ACPI: fix create_modalias() return value handling
...
|
09da8dfa98 | |
x86/irq: Fix kbuild warning in smp_irq_move_cleanup_interrupt()
Fengguang Wu's 0day kernel build service reported the following build warning: arch/x86/kernel/apic/io_apic.c:2211 smp_irq_move_cleanup_interrupt() warn: always true condition '(irq <= -1) => (0-u32max <= (-1))' because irq is defined as an unsigned int instead of an int. Fix this trivial error by redefining irq as a signed int. The remaining consumers of the int are okay. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Cc: Joerg Roedel <joro@8bytes.org> Cc: Fengguang Wu <fengguang.wu@intel.com> Link: http://lkml.kernel.org/r/1389620420-7110-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
c7a730fa46 | |
x86/irq: Fix do_IRQ() interrupt warning for cpu hotplug retriggered irqs
During heavy CPU-hotplug operations the following spurious kernel warnings can trigger: do_IRQ: No ... irq handler for vector (irq -1) [ See: https://bugzilla.kernel.org/show_bug.cgi?id=64831 ] When downing a cpu it is possible that there are unhandled irqs left in the APIC IRR register. The following code path shows how the problem can occur: 1. CPU 5 is to go down. 2. cpu_disable() on CPU 5 executes with interrupt flag cleared by local_irq_save() via stop_machine(). 3. IRQ 12 asserts on CPU 5, setting IRR but not ISR because interrupt flag is cleared (CPU unabled to handle the irq) 4. IRQs are migrated off of CPU 5, and the vectors' irqs are set to -1. 5. stop_machine() finishes cpu_disable() 6. cpu_die() for CPU 5 executes in normal context. 7. CPU 5 attempts to handle IRQ 12 because the IRR is set for IRQ 12. The code attempts to find the vector's IRQ and cannot because it has been set to -1. 8. do_IRQ() warning displays warning about CPU 5 IRQ 12. I added a debug printk to output which CPU & vector was retriggered and discovered that that we are getting bogus events. I see a 100% correlation between this debug printk in fixup_irqs() and the do_IRQ() warning. This patchset resolves this by adding definitions for VECTOR_UNDEFINED(-1) and VECTOR_RETRIGGERED(-2) and modifying the code to use them. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=64831 Signed-off-by: Prarit Bhargava <prarit@redhat.com> Reviewed-by: Rui Wang <rui.y.wang@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: janet.morgan@Intel.com Cc: tony.luck@Intel.com Cc: ruiv.wang@gmail.com Link: http://lkml.kernel.org/r/1388938252-16627-1-git-send-email-prarit@redhat.com [ Cleaned up the code a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
9345005f4e | |
ACPI: Clean up inclusions of ACPI header files
Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
8b48463f89 | |
x86/ioapic: Check attr against the previous setting when programmed more than once
When programming ioapic pinX more than once, current code does not check whether the later attr (trigger & polarity) is the same as the former or not. This causes broken semantics which can be observed in a qemu q35 machine, where ioapic's ioredtbl[x] can never be set as low-active, even if the hpet driver registered it. And hpet driver may share a high-level active IRQ line with other devices. So in qemu, when hpet-dev asserts low-level as kernel expects, the kernel has no response. With this patch, we can observe an ioredtbl[x] set as low-active for hpet. Fix it by reporting -EBUSY to the caller, when attr is different. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Cc: Kevin Hao <haokexin@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1377248327-19633-1-git-send-email-pingfank@linux.vnet.ibm.com [ Made small readability edits to both the changelog and the code. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
25aa295797 | |
x86/ioapic/kcrash: Prevent crash_kexec() from deadlocking on ioapic_lock
Prevent crash_kexec() from deadlocking on ioapic_lock. When
crash_kexec() is executed on a CPU, the CPU will take ioapic_lock
in disable_IO_APIC(). So if the cpu gets an NMI while locking
ioapic_lock, a deadlock will happen.
In this patch, ioapic_lock is zapped/initialized before disable_IO_APIC().
You can reproduce this deadlock the following way:
1. Add mdelay(1000) after raw_spin_lock_irqsave() in
native_ioapic_set_affinity()@arch/x86/kernel/apic/io_apic.c
Although the deadlock can occur without this modification, it will increase
the potential of the deadlock problem.
2. Build and install the kernel
3. Set up the OS which will run panic() and kexec when NMI is injected
# echo "kernel.unknown_nmi_panic=1" >> /etc/sysctl.conf
# vim /etc/default/grub
add "nmi_watchdog=0 crashkernel=256M" in GRUB_CMDLINE_LINUX line
# grub2-mkconfig
4. Reboot the OS
5. Run following command for each vcpu on the guest
# while true; do echo <CPU num> > /proc/irq/<IO-APIC-edge or IO-APIC-fasteoi>/smp_affinitity; done;
By running this command, cpus will get ioapic_lock for setting affinity.
6. Inject NMI (push a dump button or execute 'virsh inject-nmi <domain>' if you
use VM). After injecting NMI, panic() is called in an nmi-handler context.
Then, kexec will normally run in panic(), but the operation will be stopped
by deadlock on ioapic_lock in crash_kexec()->machine_crash_shutdown()->
native_machine_crash_shutdown()->disable_IO_APIC()->clear_IO_APIC()->
clear_IO_APIC_pin()->ioapic_read_entry().
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/20130820070107.28245.83806.stgit@yunodevel
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
17405453f4 | |
x86, io_apic: Introduce eoi_ioapic_pin call-back
This callback replaces the old __eoi_ioapic_pin function which needs a special path for interrupt remapping. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
da165322df | |
x86, msi: Introduce x86_msi.compose_msi_msg call-back
This call-back points to the right function for initializing the msi_msg structure. The old code for msi_msg generation was split up into the irq-remapped and the default case. The irq-remapped case just calls into the specific Intel or AMD implementation when the device is behind an IOMMU. Otherwise the default function is called. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
7601384f91 | |
x86, irq: Introduce setup_remapped_irq()
This function does irq-remapping specific interrupt setup like modifying the chip defaults. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
2976fd8417 | |
x86, irq: Move irq_remapped() check into free_remapped_irq
The function is called unconditionally now in IO-APIC code removing another irq_remapped() check from x86 core code. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
11b4a1cc38 | |
x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq()
This function is only called from default_ioapic_set_affinity() which is only used when interrupt remapping is disabled since the introduction of the set_affinity function pointer. So the check will always evaluate as true and can be removed. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
9f9d39e403 | |
x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core
Move all the code to either to the header file asm/irq_remapping.h or to drivers/iommu/. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
9b1b0e42f5 | |
x86, io_apic: Remove irq_remapping_enabled check in setup_timer_IRQ0_pin
This function is only called when irq-remapping is disabled. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
1d254428c0 | |
x86, io_apic: Move irq_remapping_enabled checks out of check_timer()
Move these checks to IRQ remapping code by introducing the panic_on_irq_remap() function. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
6a9f5de272 | |
x86, io_apic: Convert setup_ioapic_entry to function pointer
This pointer is changed to a different function when IRQ remapping is enabled. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
a6a25dd327 | |
x86, io_apic: Introduce set_affinity function pointer
With interrupt remapping a special function is used to change the affinity of an IO-APIC interrupt. Abstract this with a function pointer. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
373dd7a27f | |
x86, msi: Use IRQ remapping specific setup_msi_irqs routine
Use seperate routines to setup MSI IRQs for both irq_remapping_enabled cases. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
5afba62cc8 | |
x86, hpet: Introduce x86_msi_ops.setup_hpet_msi
This function pointer can be overwritten by the IRQ remapping code. The irq_remapping_enabled check can be removed from default_setup_hpet_msi. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
71054d8841 | |
x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging
This call-back is used to dump IO-APIC entries for debugging purposes into the kernel log. VT-d needs a special routine for this and will overwrite the default. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
afcc8a40a0 | |
x86, io_apic: Introduce x86_io_apic_ops.disable()
This function pointer is used to call a system-specific function for disabling the IO-APIC. Currently this is used for IRQ remapping which has its own disable routine. Also introduce the necessary infrastructure in the interrupt remapping code to overwrite this and other function pointers as necessary by interrupt remapping. Signed-off-by: Joerg Roedel <joro@8bytes.org> Acked-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> |
1c4248ca4e | |
x86/MSI: Support multiple MSIs in presense of IRQ remapping
The MSI specification has several constraints in comparison with MSI-X, most notable of them is the inability to configure MSIs independently. As a result, it is impossible to dispatch interrupts from different queues to different CPUs. This is largely devalues the support of multiple MSIs in SMP systems. Also, a necessity to allocate a contiguous block of vector numbers for devices capable of multiple MSIs might cause a considerable pressure on x86 interrupt vector allocator and could lead to fragmentation of the interrupt vectors space. This patch overcomes both drawbacks in presense of IRQ remapping and lets devices take advantage of multiple queues and per-IRQ affinity assignments. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/c8bd86ff56b5fc118257436768aaa04489ac0a4c.1353324359.git.agordeev@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
51906e779f | |
Merge branch 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 timer update from Ingo Molnar: "This tree includes HPET fixes and also implements a calibration-free, TSC match driven APIC timer interrupt mode: 'TSC deadline mode' supported in SandyBridge and later CPUs." * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: hpet: Fix inverted return value check in arch_setup_hpet_msi() x86: hpet: Fix masking of MSI interrupts x86: apic: Use tsc deadline for oneshot when available |
1ebaf4f4e6 | |
Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar: "Small cleanups." * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix the error of using "const" in gen-insn-attr-x86.awk x86, apic: Cleanup cfg->domain setup for legacy interrupts x86: Remove dead hlt_use_halt code |
e9a5a91971 |