mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-11-20 00:22:36 +07:00
| Message | SHA1 | |
|---|---|---|
x86/apic: Prevent pointless warning messages
Markus reported that he sees new warnings:
APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 4/0x84 ignored.
APIC: NR_CPUS/possible_cpus limit of 4 reached. Processor 5/0x85 ignored.
This comes from the recent persistant cpuid - nodeid changes. The code
which emits the warning has been called prior to these changes only for
enabled processors. Now it's called for disabled processors as well to get
the possible cpu accounting correct. So if the kernel is compiled for the
number of actual available/enabled CPUs and the BIOS reports disabled CPUs
as well then the above warnings are printed.
That's a pointless exercise as it only makes sense if there are more CPUs
enabled than the kernel supports.
Nake the warning conditional on enabled processors so we are back to the
state before these changes.
Fixes:
|
df610d6788 | |
x86/irq: Prevent force migration of irqs which are not in the vector domain
When a CPU is about to be offlined we call fixup_irqs() that resets IRQ affinities related to the CPU in question. The same thing is also done when the system is suspended to S-states like S3 (mem). For each IRQ we try to complete any on-going move regardless whether the IRQ is actually part of x86_vector_domain. For each IRQ descriptor we fetch its chip_data, assume it is of type struct apic_chip_data and manipulate it by clearing old_domain mask etc. For irq_chips that are not part of the x86_vector_domain, like those created by various GPIO drivers, will find their chip_data being changed unexpectly. Below is an example where GPIO chip owned by pinctrl-sunrisepoint.c gets corrupted after resume: # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in hi # rtcwake -s10 -mmem <10 seconds passes> # cat /sys/kernel/debug/gpio gpiochip0: GPIOs 360-511, parent: platform/INT344B:00, INT344B:00: gpio-511 ( |sysfs ) in ? Note '?' in the output. It means the struct gpio_chip ->get function is NULL whereas before suspend it was there. Fix this by first checking that the IRQ belongs to x86_vector_domain before we try to use the chip_data as struct apic_chip_data. Reported-and-tested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable@vger.kernel.org # 4.4+ Link: http://lkml.kernel.org/r/20161003101708.34795-1-mika.westerberg@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
db91aa793f | |
Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
"Yet another batch of cpu hotplug core updates and conversions:
- Provide core infrastructure for multi instance drivers so the
drivers do not have to keep custom lists.
- Convert custom lists to the new infrastructure. The block-mq custom
list conversion comes through the block tree and makes the diffstat
tip over to more lines removed than added.
- Handle unbalanced hotplug enable/disable calls more gracefully.
- Remove the obsolete CPU_STARTING/DYING notifier support.
- Convert another batch of notifier users.
The relayfs changes which conflicted with the conversion have been
shipped to me by Andrew.
The remaining lot is targeted for 4.10 so that we finally can remove
the rest of the notifiers"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
cpufreq: Fix up conversion to hotplug state machine
blk/mq: Reserve hotplug states for block multiqueue
x86/apic/uv: Convert to hotplug state machine
s390/mm/pfault: Convert to hotplug state machine
mips/loongson/smp: Convert to hotplug state machine
mips/octeon/smp: Convert to hotplug state machine
fault-injection/cpu: Convert to hotplug state machine
padata: Convert to hotplug state machine
cpufreq: Convert to hotplug state machine
ACPI/processor: Convert to hotplug state machine
virtio scsi: Convert to hotplug state machine
oprofile/timer: Convert to hotplug state machine
block/softirq: Convert to hotplug state machine
lib/irq_poll: Convert to hotplug state machine
x86/microcode: Convert to hotplug state machine
sh/SH-X3 SMP: Convert to hotplug state machine
ia64/mca: Convert to hotplug state machine
ARM/OMAP/wakeupgen: Convert to hotplug state machine
ARM/shmobile: Convert to hotplug state machine
arm64/FP/SIMD: Convert to hotplug state machine
...
|
597f03f9d1 | |
Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar: "Header file and a wrapper functions cleanup" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Migrate exception table users off module.h and onto extable.h x86: Clean up various simple wrapper functions |
a8adc0f091 | |
Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull low-level x86 updates from Ingo Molnar:
"In this cycle this topic tree has become one of those 'super topics'
that accumulated a lot of changes:
- Add CONFIG_VMAP_STACK=y support to the core kernel and enable it on
x86 - preceded by an array of changes. v4.8 saw preparatory changes
in this area already - this is the rest of the work. Includes the
thread stack caching performance optimization. (Andy Lutomirski)
- switch_to() cleanups and all around enhancements. (Brian Gerst)
- A large number of dumpstack infrastructure enhancements and an
unwinder abstraction. The secret long term plan is safe(r) live
patching plus maybe another attempt at debuginfo based unwinding -
but all these current bits are standalone enhancements in a frame
pointer based debug environment as well. (Josh Poimboeuf)
- More __ro_after_init and const annotations. (Kees Cook)
- Enable KASLR for the vmemmap memory region. (Thomas Garnier)"
[ The virtually mapped stack changes are pretty fundamental, and not
x86-specific per se, even if they are only used on x86 right now. ]
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
x86/asm: Get rid of __read_cr4_safe()
thread_info: Use unsigned long for flags
x86/alternatives: Add stack frame dependency to alternative_call_2()
x86/dumpstack: Fix show_stack() task pointer regression
x86/dumpstack: Remove dump_trace() and related callbacks
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder
oprofile/x86: Convert x86_backtrace() to use the new unwinder
x86/stacktrace: Convert save_stack_trace_*() to use the new unwinder
perf/x86: Convert perf_callchain_kernel() to use the new unwinder
x86/unwind: Add new unwind interface and implementations
x86/dumpstack: Remove NULL task pointer convention
fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y
sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK
lib/syscall: Pin the task stack in collect_syscall()
x86/process: Pin the target stack in get_wchan()
x86/dumpstack: Pin the target stack when dumping it
kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function
sched/core: Add try_get_task_stack() and put_task_stack()
x86/entry/64: Fix a minor comment rebase error
iommu/amd: Don't put completion-wait semaphore on stack
...
|
1a4a2bc460 | |
x86/apic: Fix silent & fatal merge conflict in __generic_processor_info()
Fix up the silent merge conflict between commit |
eb6296dec1 | |
Merge branch 'x86/urgent' into x86/apic
Bring in the upstream modifications so we can fixup the silent merge conflict which is introduced by this merge. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
1e1b37273c | |
x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that, when node online/offline happens, cache based on cpuid <-> nodeid mapping such as wq_numa_possible_cpumask will not cause any problem. It contains 4 steps: 1. Enable apic registeration flow to handle both enabled and disabled cpus. 2. Introduce a new array storing all possible cpuid <-> apicid mapping. 3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid. 4. Establish all possible cpuid <-> nodeid mapping. This patch finishes step 2. In this patch, we introduce a new static array named cpuid_to_apicid[], which is large enough to store info for all possible cpus. And then, we modify the cpuid calculation. In generic_processor_info(), it simply finds the next unused cpuid. And it is also why the cpuid <-> nodeid mapping changes with node hotplug. After this patch, we find the next unused cpuid, map it to an apicid, and store the mapping in cpuid_to_apicid[], so that cpuid <-> apicid mapping will be persistent. And finally we will use this array to make cpuid <-> nodeid persistent. cpuid <-> apicid mapping is established at local apic registeration time. But non-present or disabled cpus are ignored. In this patch, we establish all possible cpuid <-> apicid mapping when registering local apic. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-4-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
8f54969dc8 | |
x86/acpi: Enable acpi to register all possible cpus at boot time
cpuid <-> nodeid mapping is firstly established at boot time. And workqueue caches
the mapping in wq_numa_possible_cpumask in wq_numa_init() at boot time.
When doing node online/offline, cpuid <-> nodeid mapping is established/destroyed,
which means, cpuid <-> nodeid mapping will change if node hotplug happens. But
workqueue does not update wq_numa_possible_cpumask.
So here is the problem:
Assume we have the following cpuid <-> nodeid in the beginning:
Node | CPU
------------------------
node 0 | 0-14, 60-74
node 1 | 15-29, 75-89
node 2 | 30-44, 90-104
node 3 | 45-59, 105-119
and we hot-remove node2 and node3, it becomes:
Node | CPU
------------------------
node 0 | 0-14, 60-74
node 1 | 15-29, 75-89
and we hot-add node4 and node5, it becomes:
Node | CPU
------------------------
node 0 | 0-14, 60-74
node 1 | 15-29, 75-89
node 4 | 30-59
node 5 | 90-119
But in wq_numa_possible_cpumask, cpu30 is still mapped to node2, and the like.
When a pool workqueue is initialized, if its cpumask belongs to a node, its
pool->node will be mapped to that node. And memory used by this workqueue will
also be allocated on that node.
static struct worker_pool *get_unbound_pool(const struct workqueue_attrs *attrs){
...
/* if cpumask is contained inside a NUMA node, we belong to that node */
if (wq_numa_enabled) {
for_each_node(node) {
if (cpumask_subset(pool->attrs->cpumask,
wq_numa_possible_cpumask[node])) {
pool->node = node;
break;
}
}
}
Since wq_numa_possible_cpumask is not updated, it could be mapped to an offline node,
which will lead to memory allocation failure:
SLUB: Unable to allocate memory on node 2 (gfp=0x80d0)
cache: kmalloc-192, object size: 192, buffer size: 192, default order: 1, min order: 0
node 0: slabs: 6172, objs: 259224, free: 245741
node 1: slabs: 3261, objs: 136962, free: 127656
It happens here:
create_worker(struct worker_pool *pool)
|--> worker = alloc_worker(pool->node);
static struct worker *alloc_worker(int node)
{
struct worker *worker;
worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, node); --> Here, useing the wrong node.
......
return worker;
}
[Solution]
There are four mappings in the kernel:
1. nodeid (logical node id) <-> pxm
2. apicid (physical cpu id) <-> nodeid
3. cpuid (logical cpu id) <-> apicid
4. cpuid (logical cpu id) <-> nodeid
1. pxm (proximity domain) is provided by ACPI firmware in SRAT, and nodeid <-> pxm
mapping is setup at boot time. This mapping is persistent, won't change.
2. apicid <-> nodeid mapping is setup using info in 1. The mapping is setup at boot
time and CPU hotadd time, and cleared at CPU hotremove time. This mapping is also
persistent.
3. cpuid <-> apicid mapping is setup at boot time and CPU hotadd time. cpuid is
allocated, lower ids first, and released at CPU hotremove time, reused for other
hotadded CPUs. So this mapping is not persistent.
4. cpuid <-> nodeid mapping is also setup at boot time and CPU hotadd time, and
cleared at CPU hotremove time. As a result of 3, this mapping is not persistent.
To fix this problem, we establish cpuid <-> nodeid mapping for all the possible
cpus at boot time, and make it persistent. And according to init_cpu_to_node(),
cpuid <-> nodeid mapping is based on apicid <-> nodeid mapping and cpuid <-> apicid
mapping. So the key point is obtaining all cpus' apicid.
apicid can be obtained by _MAT (Multiple APIC Table Entry) method or found in
MADT (Multiple APIC Description Table). So we finish the job in the following steps:
1. Enable apic registeration flow to handle both enabled and disabled cpus.
This is done by introducing an extra parameter to generic_processor_info to let the
caller control if disabled cpus are ignored.
2. Introduce a new array storing all possible cpuid <-> apicid mapping. And also modify
the way cpuid is calculated. Establish all possible cpuid <-> apicid mapping when
registering local apic. Store the mapping in this array.
3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid.
This is also done by introducing an extra parameter to these apis to let the caller
control if disabled cpus are ignored.
4. Establish all possible cpuid <-> nodeid mapping.
This is done via an additional acpi namespace walk for processors.
This patch finished step 1.
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: mika.j.penttila@gmail.com
Cc: len.brown@intel.com
Cc: rafael@kernel.org
Cc: rjw@rjwysocki.net
Cc: yasu.isimatu@gmail.com
Cc: linux-mm@kvack.org
Cc: linux-acpi@vger.kernel.org
Cc: isimatu.yasuaki@jp.fujitsu.com
Cc: gongzhaogang@inspur.com
Cc: tj@kernel.org
Cc: izumi.taku@jp.fujitsu.com
Cc: cl@linux.com
Cc: chen.tang@easystack.cn
Cc: akpm@linux-foundation.org
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: lenb@kernel.org
Link: http://lkml.kernel.org/r/1472114120-3281-3-git-send-email-douly.fnst@cn.fujitsu.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
f7c28833c2 | |
x86/apic: Get rid of apic_version[] array
The array has a size of MAX_LOCAL_APIC, which can be as large as 32k, so it can consume up to 128k. The array has been there forever and was never used for anything useful other than a version mismatch check which was introduced in 2009. There is no reason to store the version in an array. The kernel is not prepared to handle different APIC versions anyway, so the real important part is to detect a version mismatch and warn about it, which can be done with a single variable as well. [ tglx: Massaged changelog ] Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com> CC: Andy Lutomirski <luto@amacapital.net> CC: Borislav Petkov <bp@alien8.de> CC: Brian Gerst <brgerst@gmail.com> CC: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20160913181232.30815-1-dvlasenk@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
cff9ab2b29 | |
x86/apic/uv: Convert to hotplug state machine
Install the callbacks via the state machine. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160906170457.32393-19-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
b067a7be41 | |
Merge branch 'linus' into x86/asm, to pick up recent fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
d4b80afbba | |
x86: Clean up various simple wrapper functions
Remove unneeded variables and assignments. While we are here, let's fix the following as well: - Remove unnecessary parentheses - Remove unnecessary unsigned-suffix 'U' from constant values - Reword the comment in set_apic_id() (suggested by Thomas Gleixner) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Borislav Petkov <bp@suse.de> Cc: Daniel J Blueman <daniel@numascale.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Mike Travis <travis@sgi.com> Cc: Nathan Zimmer <nzimmer@sgi.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steffen Persvold <sp@numascale.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Wei Jiangang <weijg.fnst@cn.fujitsu.com> Link: http://lkml.kernel.org/r/1473573502-27954-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
f148b41e8b | |
Merge branch 'x86/mm' into x86/asm, to unify the two branches for simplicity
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
2b3061c77c | |
x86/apic: Fix num_processors value in case of failure
If the topology package map check of the APIC ID and the CPU is a failure, we don't generate the processor info for that APIC ID yet we increase disabled_cpus by one - which is buggy. Only increase num_processors once we are sure we don't fail. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1473214893-16481-1-git-send-email-douly.fnst@cn.fujitsu.com [ Rewrote the changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
c291b01515 | |
x86/apic: Update comment about disabling processor focus
Fix references to discarded end_level_ioapic_irq(). Signed-off-by: Wei Jiangang <weijg.fnst@cn.fujitsu.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@suse.de Link: http://lkml.kernel.org/r/1471576957-12961-2-git-send-email-weijg.fnst@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
5035da4199 | |
x86/apic: Do not init irq remapping if ioapic is disabled
native_smp_prepare_cpus
-> default_setup_apic_routing
-> enable_IR_x2apic
-> irq_remapping_prepare
-> intel_prepare_irq_remapping
-> intel_setup_irq_remapping
So IR table is setup even if "noapic" boot parameter is added. As a result we
crash later when the interrupt affinity is set due to a half initialized
remapping infrastructure.
Prevent remap initialization when IOAPIC is disabled.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Joerg Roedel <joro@8bytes.org>
Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
2e63ad4bd5 | |
x86/apic, ACPI: Remove the repeated lapic address override entry parsing
The ACPI MADT has a 32-bit field providing lapic address at which each processor can access its lapic information. MADT also contains an optional entry to provide a 64-bit address to override the 32-bit one. However the current code does the lapic address override entry parsing twice. One is in early_acpi_boot_init() because AMD NUMA need get boot_cpu_id earlier. The other is in acpi_boot_init() which parses all MADT entries. So in this patch we remove the repeated code in the 2nd part. Meanwhile print lapic override entry information like other MADT entry, this will be added to boot log. This patch is not supposed to change any runtime behavior, other than improving kernel messages. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-acpi@vger.kernel.org Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/1470985033-22493-2-git-send-email-bhe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
6de421198c | |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar: "This is bigger than usual - the reason is partly a pent-up stream of fixes after the merge window and partly accidental. The fixes are: - five patches to fix a boot failure on Andy Lutomirsky's laptop - four SGI UV platform fixes - KASAN fix - warning fix - documentation update - swap entry definition fix - pkeys fix - irq stats fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe() x86/efi: Allocate a trampoline if needed in efi_free_boot_services() x86/boot: Rework reserve_real_mode() to allow multiple tries x86/boot: Defer setup_real_mode() to early_initcall time x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly x86/boot: Run reserve_bios_regions() after we initialize the memory map x86/irq: Do not substract irq_tlb_count from irq_call_count x86/mm: Fix swap entry comment and macro x86/mm/kaslr: Fix -Wformat-security warning x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET x86/mm: Disable preemption during CR3 read+write x86/mm/KASLR: Increase BRK pages for KASLR memory randomization x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text |
01ea443982 | |
x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe()
I made a mistake while converting the driver to the hotplug state
machine and as a result x2apic_cluster_probe() was accessing
cpus_in_cluster before allocating it.
This patch fixes it by setting the cpumask after the allocation the
memory succeeded.
While at it, I marked two functions static which are only used within
this file.
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
|
d52c0569ba | |
x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems
The latest UV kernel support panics when RHEL7 kexec's the kdump kernel to make a dumpfile. This patch fixes the problem by turning off all UV support if NUMA is off. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.577755634@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
5a52e8f822 | |
x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values
There are some circumstances where the UV4 BIOS cannot provide the correct Proximity Node values to associate with specific Sockets and Physical Nodes. The decision was made to remove these values from BIOS and for the kernel to get these values from the standard ACPI tables. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.414210079@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
22ac2bca92 | |
x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous
The UV4 Socket IDs are not guaranteed to equate to Node values which can cause the GAM (Global Addressable Memory) table lookups to fail. Fix this by using an independent index into the GAM table instead of the Socket ID to reference the base address. Tested-by: Frank Ramsay <framsay@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Reviewed-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160801184050.048755337@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
054f621fd5 | |
x86: Apply more __ro_after_init and const
Guided by grsecurity's analogous __read_only markings in arch/x86, this applies several uses of __ro_after_init to structures that are only updated during __init, and const for some structures that are never updated. Additionally extends __init markings to some functions that are only used during __init, and cleans up some missing C99 style static initializers. Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: PaX Team <pageexec@freemail.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Link: http://lkml.kernel.org/r/20160808232906.GA29731@www.outflux.net Signed-off-by: Ingo Molnar <mingo@kernel.org> |
404f6aac9b | |
Merge branch 'linus' into timers/urgent, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org> |
fdbdfefbab | |
x86/timers/apic: Inform TSC deadline clockevent device about recalibration
This patch eliminates a source of imprecise APIC timer interrupts, which imprecision may result in double interrupts or even late interrupts. The TSC deadline clockevent devices' configuration and registration happens before the TSC frequency calibration is refined in tsc_refine_calibration_work(). This results in the TSC clocksource and the TSC deadline clockevent devices being configured with slightly different frequencies: the former gets the refined one and the latter are configured with the inaccurate frequency detected earlier by means of the "Fast TSC calibration using PIT". Within the APIC code, introduce the notifier function lapic_update_tsc_freq() which reconfigures all per-CPU TSC deadline clockevent devices with the current tsc_khz. Call it from the TSC code after TSC calibration refinement has happened. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Christopher S. Hall <christopher.s.hall@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lkml.kernel.org/r/20160714152255.18295-3-nicstange@gmail.com [ Pushed #ifdef CONFIG_X86_LOCAL_APIC into header, improved changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
6731b0d611 | |
x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error
I noticed the following bug/misbehavior on certain Intel systems: with a single task running on a NOHZ CPU on an Intel Haswell, I recognized that I did not only get the one expected local_timer APIC interrupt, but two per second at minimum. (!) Further tracing showed that the first one precedes the programmed deadline by up to ~50us and hence, it did nothing except for reprogramming the TSC deadline clockevent device to trigger shortly thereafter again. The reason for this is imprecise calibration, the timeout we program into the APIC results in 'too short' timer interrupts. The core (hr)timer code notices this (because it has a precise ktime source and sees the short interrupt) and fixes it up by programming an additional very short interrupt period. This is obviously suboptimal. The reason for the imprecise calibration is twofold, and this patch fixes the first reason: In setup_APIC_timer(), the registered clockevent device's frequency is calculated by first dividing tsc_khz by TSC_DIVISOR and multiplying it with 1000 afterwards: (tsc_khz / TSC_DIVISOR) * 1000 The multiplication with 1000 is done for converting from kHz to Hz and the division by TSC_DIVISOR is carried out in order to make sure that the final result fits into an u32. However, with the order given in this calculation, the roundoff error introduced by the division gets magnified by a factor of 1000 by the following multiplication. To fix it, reversing the order of the division and the multiplication a la: (tsc_khz * 1000) / TSC_DIVISOR ... reduces the roundoff error already. Furthermore, if TSC_DIVISOR divides 1000, associativity holds: (tsc_khz * 1000) / TSC_DIVISOR = tsc_khz * (1000 / TSC_DIVISOR) and thus, the roundoff error even vanishes and the whole operation can be carried out within 32 bits. The powers of two that divide 1000 are 2, 4 and 8. A value of 8 for TSC_DIVISOR still allows for TSC frequencies up to 2^32 / 10^9ns * 8 = 34.4GHz which is way larger than anything to expect in the next years. Thus we also replace the current TSC_DIVISOR value of 32 by 8. Reverse the order of the divison and the multiplication in the calculation of the registered clockevent device's frequency. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Christopher S. Hall <christopher.s.hall@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: http://lkml.kernel.org/r/20160714152255.18295-2-nicstange@gmail.com [ Improved changelog. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
1a9e4c564a | |
tree-wide: replace config_enabled() with IS_ENABLED()
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
97f2645f35 | |
Merge branch 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 header cleanups from Ingo Molnar: "This tree is a cleanup of the x86 tree reducing spurious uses of module.h - which should improve build performance a bit" * 'x86-headers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, crypto: Restore MODULE_LICENSE() to glue_helper.c so it loads x86/apic: Remove duplicated include from probe_64.c x86/ce4100: Remove duplicated include from ce4100.c x86/headers: Include spinlock_types.h in x8664_ksyms_64.c for missing spinlock_t x86/platform: Delete extraneous MODULE_* tags fromm ts5500 x86: Audit and remove any remaining unnecessary uses of module.h x86/kvm: Audit and remove any unnecessary uses of module.h x86/xen: Audit and remove any unnecessary uses of module.h x86/platform: Audit and remove any unnecessary uses of module.h x86/lib: Audit and remove any unnecessary uses of module.h x86/kernel: Audit and remove any unnecessary uses of module.h x86/mm: Audit and remove any unnecessary uses of module.h x86: Don't use module.h just for AUTHOR / LICENSE tags |
aeb35d6b74 | |
Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp hotplug updates from Thomas Gleixner:
"This is the next part of the hotplug rework.
- Convert all notifiers with a priority assigned
- Convert all CPU_STARTING/DYING notifiers
The final removal of the STARTING/DYING infrastructure will happen
when the merge window closes.
Another 700 hundred line of unpenetrable maze gone :)"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
timers/core: Correct callback order during CPU hot plug
leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
powerpc/numa: Convert to hotplug state machine
arm/perf: Fix hotplug state machine conversion
irqchip/armada: Avoid unused function warnings
ARC/time: Convert to hotplug state machine
clocksource/atlas7: Convert to hotplug state machine
clocksource/armada-370-xp: Convert to hotplug state machine
clocksource/exynos_mct: Convert to hotplug state machine
clocksource/arm_global_timer: Convert to hotplug state machine
rcu: Convert rcutree to hotplug state machine
KVM/arm/arm64/vgic-new: Convert to hotplug state machine
smp/cfd: Convert core to hotplug state machine
x86/x2apic: Convert to CPU hotplug state machine
profile: Convert to hotplug state machine
timers/core: Convert to hotplug state machine
hrtimer: Convert to hotplug state machine
x86/tboot: Convert to hotplug state machine
arm64/armv8 deprecated: Convert to hotplug state machine
hwtracing/coresight-etm4x: Convert to hotplug state machine
...
|
a6408f6cb6 | |
xen: features and fixes for 4.8-rc0
- ACPI support for guests on ARM platforms.
- Generic steal time support for arm and x86.
- Support cases where kernel cpu is not Xen VCPU number (e.g., if
in-guest kexec is used).
- Use the system workqueue instead of a custom workqueue in various
places.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXmLlrAAoJEFxbo/MsZsTRvRQH/1wOMF8BmlbZfR7H3qwDfjst
ApNifCiZE08xDtWBlwUaBFAQxyflQS9BBiNZDVK0sysIdXeOdpWV7V0ZjRoLL+xr
czsaaGXDcmXxJxApoMDVuT7FeP6rEk6LVAYRoHpVjJjMZGW3BbX1vZaMW4DXl2WM
9YNaF2Lj+rpc1f8iG31nUxwkpmcXFog6ct4tu7HiyCFT3hDkHt/a4ghuBdQItCkd
vqBa1pTpcGtQBhSmWzlylN/PV2+NKcRd+kGiwd09/O/rNzogTMCTTWeHKAtMpPYb
Cu6oSqJtlK5o0vtr0qyLSWEGIoyjE2gE92s0wN3iCzFY1PldqdsxUO622nIj+6o=
=G6q3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"Features and fixes for 4.8-rc0:
- ACPI support for guests on ARM platforms.
- Generic steal time support for arm and x86.
- Support cases where kernel cpu is not Xen VCPU number (e.g., if
in-guest kexec is used).
- Use the system workqueue instead of a custom workqueue in various
places"
* tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits)
xen: add static initialization of steal_clock op to xen_time_ops
xen/pvhvm: run xen_vcpu_setup() for the boot CPU
xen/evtchn: use xen_vcpu_id mapping
xen/events: fifo: use xen_vcpu_id mapping
xen/events: use xen_vcpu_id mapping in events_base
x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info
x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op
xen: introduce xen_vcpu_id mapping
x86/acpi: store ACPI ids from MADT for future usage
x86/xen: update cpuid.h from Xen-4.7
xen/evtchn: add IOCTL_EVTCHN_RESTRICT
xen-blkback: really don't leak mode property
xen-blkback: constify instance of "struct attribute_group"
xen-blkfront: prefer xenbus_scanf() over xenbus_gather()
xen-blkback: prefer xenbus_scanf() over xenbus_gather()
xen: support runqueue steal time on xen
arm/xen: add support for vm_assist hypercall
xen: update xen headers
xen-pciback: drop superfluous variables
xen-pciback: short-circuit read path used for merging write values
...
|
08fd8c1768 | |
Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"The irq department delivers:
- new core infrastructure to allow better management of multi-queue
devices (interrupt spreading, node aware descriptor allocation ...)
- a new interrupt flow handler to support the new fangled Intel VMD
devices.
- yet another new interrupt controller driver.
- a series of fixes which addresses sparse warnings, missing
includes, missing static declarations etc from Ben Dooks.
- a fix for the error handling in the hierarchical domain allocation
code.
- the usual pile of small updates to core and driver code"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
genirq: Fix missing irq allocation affinity hint
irqdomain: Fix irq_domain_alloc_irqs_recursive() error handling
irq/Documentation: Correct result of echnoing 5 to smp_affinity
MAINTAINERS: Remove Jiang Liu from irq domains
genirq/msi: Fix broken debug output
genirq: Add a helper to spread an affinity mask for MSI/MSI-X vectors
genirq/msi: Make use of affinity aware allocations
genirq: Use affinity hint in irqdesc allocation
genirq: Add affinity hint to irq allocation
genirq: Introduce IRQD_AFFINITY_MANAGED flag
genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
irqchip/s3c24xx: Fixup IO accessors for big endian
irqchip/exynos-combiner: Fix usage of __raw IO
irqdomain: Fix disposal of mappings for interrupt hierarchies
irqchip/aspeed-vic: Add irq controller for Aspeed
doc/devicetree: Add Aspeed VIC bindings
x86/PCI/VMD: Use untracked irq handler
genirq: Add untracked irq handler
irqchip/mips-gic: Populate irq_domain names
irqchip/gicv3-its: Implement two-level(indirect) device table support
...
|
e65805251f | |
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"This update provides the following changes:
- The rework of the timer wheel which addresses the shortcomings of
the current wheel (cascading, slow search for next expiring timer,
etc). That's the first major change of the wheel in almost 20
years since Finn implemted it.
- A large overhaul of the clocksource drivers init functions to
consolidate the Device Tree initialization
- Some more Y2038 updates
- A capability fix for timerfd
- Yet another clock chip driver
- The usual pile of updates, comment improvements all over the place"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (130 commits)
tick/nohz: Optimize nohz idle enter
clockevents: Make clockevents_subsys static
clocksource/drivers/time-armada-370-xp: Fix return value check
timers: Implement optimization for same expiry time in mod_timer()
timers: Split out index calculation
timers: Only wake softirq if necessary
timers: Forward the wheel clock whenever possible
timers/nohz: Remove pointless tick_nohz_kick_tick() function
timers: Optimize collect_expired_timers() for NOHZ
timers: Move __run_timers() function
timers: Remove set_timer_slack() leftovers
timers: Switch to a non-cascading wheel
timers: Reduce the CPU index space to 256k
timers: Give a few structs and members proper names
hlist: Add hlist_is_singular_node() helper
signals: Use hrtimer for sigtimedwait()
timers: Remove the deprecated mod_timer_pinned() API
timers, net/ipv4/inet: Initialize connection request timers as pinned
timers, drivers/tty/mips_ejtag: Initialize the poll timer as pinned
timers, drivers/tty/metag_da: Initialize the poll timer as pinned
...
|
55392c4c06 | |
x86/acpi: store ACPI ids from MADT for future usage
Currently we don't save ACPI ids (unlike LAPIC ids which go to x86_cpu_to_apicid) from MADT and we may need this information later. Particularly, ACPI ids is the only existent way for a PVHVM Xen guest to figure out Xen's idea of its vCPUs ids before these CPUs boot and in some cases these ids diverge from Linux's cpu ids. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com> |
3e9e57fad3 | |
x86/apic: Remove duplicated include from probe_64.c
Remove duplicated include. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Link: http://lkml.kernel.org/r/1468929740-8999-1-git-send-email-weiyj_lk@163.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
f6329088b3 | |
x86/x2apic: Convert to CPU hotplug state machine
Install the callbacks via the state machine and let the core invoke the callbacks on the already online CPUs. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160713153337.736898691@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> |
6b2c28471d | |
x86/apic: Remove the unused struct apic::apic_id_mask field
The only user verify_local_APIC() had been removed by commit:
|
102bb9fef6 | |
x86/kernel: Audit and remove any unnecessary uses of module.h
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. The advantage in doing so is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h was the source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each obj-y/bool instance for the presence of either and replace as needed. Build testing revealed some implicit header usage that was fixed up accordingly. Note that some bool/obj-y instances remain since module.h is the header for some exception table entry stuff, and for things like __init_or_module (code that is tossed when MODULES=n). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160714001901.31603-4-paul.gortmaker@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
186f43608a | |
timers, x86/apic/uv: Initialize the UV heartbeat timer as pinned
Pinned timers must carry the pinned attribute in the timer structure itself, so convert the code to the new API. No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: Eric Dumazet <edumazet@google.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094341.133837204@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org> |
920a4a70c5 | |
genirq: Add affinity hint to irq allocation
Add an extra argument to the irq(domain) allocation functions, so we can hand down affinity hints to the allocator. Thats necessary to implement proper support for multiqueue devices. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-block@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-nvme@lists.infradead.org Cc: axboe@fb.com Cc: agordeev@redhat.com Link: http://lkml.kernel.org/r/1467621574-8277-4-git-send-email-hch@lst.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
06ee6d571f | |
x86/apic: Fix misspelled APIC
Signed-off-by: Claudio Fontana <claudio.fontana@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: trivial@kernel.org Link: http://lkml.kernel.org/r/1465468318-19867-1-git-send-email-hw.claudio@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
3c8fad9183 | |
x86/ioapic: Simplify ioapic_setup_resources()
Optimize the function by removing the variable 'num'. Signed-off-by: Rui Wang <rui.y.wang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: tony.luck@intel.com Cc: linux-pci@vger.kernel.org Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bhelgaas@google.com Link: http://lkml.kernel.org/r/1465369193-4816-4-git-send-email-rui.y.wang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
4855531eb8 | |
x86/ioapic: Fix incorrect pointers in ioapic_setup_resources()
On a 4-socket Brickland system, hot-removing one ioapic is fine.
Hot-removing the 2nd one causes panic in mp_unregister_ioapic()
while calling release_resource().
It is because the iomem_res pointer has already been released
when removing the first ioapic.
To explain the use of &res[num] here: res is assigned to ioapic_resources,
and later in ioapic_insert_resources() we do:
struct resource *r = ioapic_resources;
for_each_ioapic(i) {
insert_resource(&iomem_resource, r);
r++;
}
Here 'r' is treated as an arry of 'struct resource', and the r++ ensures
that each element of the array is inserted separately. Thus we should call
release_resouce() on each element at &res[num].
Fix it by assigning the correct pointers to ioapics[i].iomem_res in
ioapic_setup_resources().
Signed-off-by: Rui Wang <rui.y.wang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: tony.luck@intel.com
Cc: linux-pci@vger.kernel.org
Cc: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1465369193-4816-3-git-send-email-rui.y.wang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
9d98bcec73 | |
printk/nmi: generic solution for safe printk in NMI
printk() takes some locks and could not be used a safe way in NMI
context.
The chance of a deadlock is real especially when printing stacks from
all CPUs. This particular problem has been addressed on x86 by the
commit
|
42a0bb3f71 | |
Merge branch 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar: "The main change is the addition of SGI/UV4 support" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/platform/UV: Fix incorrect nodes and pnodes for cpuless and memoryless nodes x86/platform/UV: Remove Obsolete GRU MMR address translation x86/platform/UV: Update physical address conversions for UV4 x86/platform/UV: Build GAM reference tables x86/platform/UV: Support UV4 socket address changes x86/platform/UV: Add obtaining GAM Range Table from UV BIOS x86/platform/UV: Add UV4 addressing discovery function x86/platform/UV: Fold blade info into per node hub info structs x86/platform/UV: Allocate common per node hub info structs on local node x86/platform/UV: Move blade local processor ID to the per cpu info struct x86/platform/UV: Move scir info to the per cpu info struct x86/platform/UV: Create per cpu info structs to replace per hub info structs x86/platform/UV: Update MMIOH setup function to work for both UV3 and UV4 x86/platform/UV: Clean up redunduncies after merge of UV4 MMR definitions x86/platform/UV: Add UV4 Specific MMR definitions x86/platform/UV: Prep for UV4 MMR updates x86/platform/UV: Add UV MMR Illegal Access Function x86/platform/UV: Add UV4 Specific Defines x86/platform/UV: Add UV Architecture Defines x86/platform/UV: Add Initial UV4 definitions ... |
bc231d9ede | |
Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- MSR access API fixes and enhancements (Andy Lutomirski)
- early exception handling improvements (Andy Lutomirski)
- user-space FS/GS prctl usage fixes and improvements (Andy
Lutomirski)
- Remove the cpu_has_*() APIs and replace them with equivalents
(Borislav Petkov)
- task switch micro-optimization (Brian Gerst)
- 32-bit entry code simplification (Denys Vlasenko)
- enhance PAT handling in enumated CPUs (Toshi Kani)
... and lots of other cleanups/fixlets"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
x86/arch_prctl/64: Restore accidentally removed put_cpu() in ARCH_SET_GS
x86/entry/32: Remove asmlinkage_protect()
x86/entry/32: Remove GET_THREAD_INFO() from entry code
x86/entry, sched/x86: Don't save/restore EFLAGS on task switch
x86/asm/entry/32: Simplify pushes of zeroed pt_regs->REGs
selftests/x86/ldt_gdt: Test set_thread_area() deletion of an active segment
x86/tls: Synchronize segment registers in set_thread_area()
x86/asm/64: Rename thread_struct's fs and gs to fsbase and gsbase
x86/arch_prctl/64: Remove FSBASE/GSBASE < 4G optimization
x86/segments/64: When load_gs_index fails, clear the base
x86/segments/64: When loadsegment(fs, ...) fails, clear the base
x86/asm: Make asm/alternative.h safe from assembly
x86/asm: Stop depending on ptrace.h in alternative.h
x86/entry: Rename is_{ia32,x32}_task() to in_{ia32,x32}_syscall()
x86/asm: Make sure verify_cpu() has a good stack
x86/extable: Add a comment about early exception handlers
x86/msr: Set the return value to zero when native_rdmsr_safe() fails
x86/paravirt: Make "unsafe" MSR accesses unsafe even if PARAVIRT=y
x86/paravirt: Add paravirt_{read,write}_msr()
x86/msr: Carry on after a non-"safe" MSR access fails
...
|
168f1a7163 | |
Merge branch 'x86/urgent' into x86/platform, to resolve conflict
Conflicts: arch/x86/kernel/apic/x2apic_uv_x.c Signed-off-by: Ingo Molnar <mingo@kernel.org> |
3cd0b53553 | |
x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init
A while back the following commit: |
08914f436b | |
x86/platform/UV: Fix incorrect nodes and pnodes for cpuless and memoryless nodes
This patch fixes the problem of incorrect nodes and pnodes being returned when referring to nodes that either have no cpus (AKA "headless") or no memory. Tested-by: John Estabrook <estabrook@sgi.com> Tested-by: Gary Kroening <gfk@sgi.com> Tested-by: Nathan Zimmer <nzimmer@sgi.com> Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160429215406.192644884@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
f68376fc9e | |
x86/platform/UV: Update physical address conversions for UV4
This patch builds support for the new conversions of physical addresses to and from sockets, pnodes and nodes in UV4. It is designed to be as efficient as possible as lookups are done inside an interrupt context in some cases. It will be further optimized when physical hardware is available to measure execution time. Tested-by: Dimitri Sivanich <sivanich@sgi.com> Tested-by: John Estabrook <estabrook@sgi.com> Tested-by: Gary Kroening <gfk@sgi.com> Tested-by: Nathan Zimmer <nzimmer@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Cc: Andrew Banman <abanman@sgi.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Len Brown <len.brown@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Russ Anderson <rja@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20160429215405.841051741@asylum.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
c85375cd19 |