Watch
1
0
Fork
You've already forked kernel_a52xq
0
mirror of https://github.com/a52xq-dev/kernel.git synced 2026-11-22 01:46:57 +07:00
Commit graph kernel_a52xq/drivers/mtd/nand/raw
Message SHA1
MIPS: txx9: Move the ndfc.h header to include/linux/platform_data/txx9
This way we will be able to compile the ndfmc driver when
COMPILE_TEST=y.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:23 +02:00
dc2865ac35
mtd: rawnand: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y
It just makes maintainers' life easier by allowing them to compile-test
this driver without having FSL_SOC, ARCH_LAYERSCAPE or SOC_LS1021A
enabled.

We also need to add a dependency on HAS_IOMEM to make sure the
driver compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:22 +02:00
a6be5051cd
mtd: rawnand: fsl_ifc: Add an __iomem specifier on eccstat_regs
The local eccstat_regs variable in fsl_ifc_run_command() is missing an
__iomem specifier, and sparce complains about that.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:22 +02:00
62a316088d
mtd: rawnand: fsmc: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having PLAT_SPEAR, ARCH_NOMADIK,
ARCH_U8500 or MACH_U300 enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:21 +02:00
17c09ed706
mtd: rawnand: fsmc: Use uintptr_t casts instead of unsigned ones
uintptr_t should be used when casting a pointer to an unsigned int so
that the code compiles without warnings even on 64-bit architectures.

This is needed if we want to allow selection of this driver when
COMPILE_TEST=y.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:20 +02:00
f55824c6fa
mtd: rawnand: fscm: Avoid collision on PC def when compiling for MIPS
We want to allow this driver to be selected when COMPILE_TEST=y, this
means the driver can be compiled for any arch, including MIPS. When
compiling this driver for MIPS, we end up with a collision on the 'PC'
macro definition (also defined in arch/mips/include/asm/ptrace.h).

Prefix the fsmc one with FSMC_ to avoid this problem.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:20 +02:00
8f3931ed97
mtd: rawnand: sunxi: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_SUNXI enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:20 +02:00
e37db6df41
mtd: rawnand: sunxi: Make sure ret is initialized in sunxi_nfc_read_byte()
Fixes the following smatch warning:

drivers/mtd/nand/raw/sunxi_nand.c:551 sunxi_nfc_read_byte() error: uninitialized symbol 'ret'.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:19 +02:00
06c8b5dc93
mtd: rawnand: sunxi: Add an U suffix to NFC_PAGE_OP definition
Fixes the "warning: large integer implicitly truncated to unsigned type
[-Woverflow]" warning when compiled for x86.

This is needed in order to allow compiling this driver when
COMPILE_TEST=y.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:19 +02:00
cf3e3fd2e9
mtd: rawnand: davinci: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_DAVINCI or ARCH_KEYSTONE
enabled.

We also need to add a dependency on HAS_IOMEM to make sure the
driver compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:18 +02:00
b9221470b0
mtd: rawnand: fix indentation in Kconfig
Rules about Kconfig are simple but in the raw NAND directory indentation
is somehow archaic. Fix the indentation in the whole file.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Miquel Raynal   commited 2018-07-18 10:10:18 +02:00
d3691813b0
mtd: rawnand: davinci: Use uintptr_t casts instead of unsigned ones
uintptr_t should be used when casting a pointer to an unsigned int so
that the code compiles without warnings even on 64-bit architectures.

This is needed if we want to allow selection of this driver when
COMPILE_TEST=y.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:17 +02:00
cc53d5ca38
mtd: rawnand: davinci: Stop doing iomem pointer <-> u32 conversions
There is no point in doing this sort of conversion since we can
replace |= by += operations which are perfectly valid on pointers.

This is done in preparation of COMPILE_TEST addition to the NAND_DAVINCI
Kconfig entry, since building for x86 generates several warnings because
of inappropriate u32 <-> void * conversions (pointers are 64-bit large
on x86_64).

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:17 +02:00
c5b76d8dd2
mtd: rawnand: atmel: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_AT91 enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:16 +02:00
88a40e7dca
mtd: rawnand: atmel: Add an __iomem cast on gen_pool_dma_alloc() call
gen_pool_dma_alloc() return type is void *, while internally, the
memory region exposed by the sram driver has been mapped with
ioremap().

Add a void * to void __iomem * cast to make sparse happy.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:16 +02:00
d28395c908
mtd: rawnand: atmel: Use uintptr_t casts instead of unsigned int
When casting a pointer to an unsigned int, uintptr_t should be used to
cope with the pointer size differences between 32-bit and 64-bit
architectures.

This is needed if we want to allow compilation of this driver when
COMPILE_TEST=y.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:15 +02:00
e6848511d0
mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op()
Modern NAND controller drivers implement ->exec_op() instead of
->cmdfunc(), make sure we don't end up with a NULL pointer dereference
when hynix_nand_reg_write_op() is called.

Fixes: 8878b126df ("mtd: nand: add ->exec_op() implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:15 +02:00
20366e19e2
mtd: rawnand: marvell: set reg_clk to NULL if it can't be obtained
Don't keep an error-pointer around in the private struct. If this optional
clock can't be obtained, simply set the pointer to NULL instead so we can
use clk_prepare_enable() on it without further checks,

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Daniel Mack   authored and   Miquel Raynal   commited 2018-07-18 10:10:15 +02:00
f9e64d6104
mtd: rawnand: marvell: remove bogus comment in marvell_nfc_select_chip()
The comment in marvell_nfc_select_chip() about ndtr0 and ndtr1 didn't
reflect what the driver was doing.

The values of NDTR0 and NDTR1 are read from the registers at probe time
and a copy is retained in 'struct marvell_nand_chip'. If keep-config is
set in the DT properties, there are no other writers of these timing
variables so they can safely be used when the chip is selected.

As suggested by Miquel Raynal, simply remove the comment.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Daniel Mack   authored and   Miquel Raynal   commited 2018-07-18 10:10:14 +02:00
7734a275a7
mtd: rawnand: marvell: add suspend and resume hooks
This patch restores the suspend and resume hooks that the old driver used
to have. Apart from stopping and starting the clocks, the resume callback
also nullifies the selected_chip pointer, so the next command that is issued
will re-select the chip and thereby restore the timing registers.

Factor out some code from marvell_nfc_init() into a new function
marvell_nfc_reset() and also call it at resume time to reset some registers
that don't retain their contents during low-power mode.

Without this patch, a PXA3xx based system would cough up an error similar to
the one below after resume.

[   44.660162] marvell-nfc 43100000.nand-controller: Timeout waiting for  RB signal
[   44.671492] ubi0 error: ubi_io_write: error -110 while writing 2048 bytes to PEB 102:38912, written 0 bytes
[   44.682887] CPU: 0 PID: 1417 Comm: remote-control Not tainted 4.18.0-rc2+ #344
[   44.691197] Hardware name: Marvell PXA3xx (Device Tree Support)
[   44.697111] Backtrace:
[   44.699593] [<c0106458>] (dump_backtrace) from [<c0106718>] (show_stack+0x18/0x1c)
[   44.708931]  r7:00000800 r6:00009800 r5:00000066 r4:c6139000
[   44.715833] [<c0106700>] (show_stack) from [<c0678a60>] (dump_stack+0x20/0x28)
[   44.724206] [<c0678a40>] (dump_stack) from [<c0456cbc>] (ubi_io_write+0x3d4/0x630)
[   44.732925] [<c04568e8>] (ubi_io_write) from [<c0454428>] (ubi_eba_write_leb+0x690/0x6fc)
...

Fixes: 02f26ecf8c ("mtd: nand: add reworked Marvell NAND controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Daniel Mack   authored and   Miquel Raynal   commited 2018-07-18 10:10:14 +02:00
bd9c3f9b3c
mtd: rawnand: mxc: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Fabio Estevam   authored and   Miquel Raynal   commited 2018-07-18 10:10:13 +02:00
c786bbcc1a
mtd: rawnand: gpmi: Switch to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Fabio Estevam   authored and   Miquel Raynal   commited 2018-07-18 10:10:13 +02:00
b04a3fe314
mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}()
None of the board files are overloading those hooks, so let's drop them
from struct platform_nand_ctrl.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:12 +02:00
dc2d8856a7
mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready()
None of the boards seem to overload the ->dev_ready() hook, just drop
this field from orion_nand_data.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:12 +02:00
f0f01838f7
mtd: rawnand: Kill the chip->scan_bbt() hook
None of the existing drivers are overloading the ->scan_bbt() method,
let's get rid of it and replace calls to ->scan_bbt() by
nand_create_bbt() ones.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 10:10:12 +02:00
e80eba7581
mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt()
Rename nand_default_bbt() into nand_create_bbt() and pass it a nand_chip
object to prepare removal of the chip->scan_bbt() hook.

We add a temporary nand_default_bbt() wrapper which will be dropped
after the removal of ->scan_bbt().

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:22 +02:00
44b07b921d
mtd: rawnand: Kill cafe_nand_bug()
Leaving a function pointer to NULL should be enough to trigger a NULL
pointer exception, and anyway, if we want to BUG() when some missing
hooks are called, this should be done in the core, so let's drop the
cafe_nand_bug() dummy function.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:20 +02:00
5dcddebb1b
mtd: rawnand: nuc900: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_W90X900 enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:19 +02:00
d4de09e5bb
mtd: rawnand: qcom: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_QCOM enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:19 +02:00
b2d55fe2ad
mtd: rawnand: mxc: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_MXC enabled.

We also need to add a dependency on HAS_IOMEM to make sure the
driver compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:18 +02:00
434bc2e148
mtd: rawnand: mxc: Avoid inclusion of asm/mach headers
asm/mach/flash.h does not seem to be needed, drop this #include to make
the code completely machine and arch independent and allow one to
compile it when COMPILE_TEST=y.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:18 +02:00
c03f3cf37e
mtd: rawnand: brcmnand: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARM, ARM64 or MIPS enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:17 +02:00
0beb487241
mtd: rawnand: lpc32xx: Allow selection of these drivers when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test these drivers without having ARCH_LPC32XX enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:17 +02:00
ee70e5e796
mtd: rawnand: sharpsl: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_PXA enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:17 +02:00
18331b9810
mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers
We don't need mach/hardware.h and sm/mach-types.h, and asm/io.h can be
replaced by linux/io.h.

Now that we removed those inclusions, we're ready to allow selection of
this driver when COMPILE_TEST=y.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:16 +02:00
b22a8b075d
mtd: rawnand: omap2: Allow selection of this driver when COMPILE_TEST=y
It just makes NAND maintainers' life easier by allowing them to
compile-test this driver without having ARCH_OMAP2PLUS or ARCH_KEYSTONE
enabled.

We also need to add a dependency on HAS_IOMEM to make sure the driver
compiles correctly.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:16 +02:00
31ac1a53eb
mtd: rawnand: Add 'depends on HAS_IOMEM' where missing
When COMPILE_TEST is allowed and the platform needs uses the iomem API
we need to add an explicit dependency on HAS_IOMEM to avoid selection
of these drivers when building for an arch that has no iomem support
(this is the case of arch/um).

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:15 +02:00
45e9f40f46
mtd: rawnand: gpmi: Remove useless dependency on MTD_NAND
The MTD_NAND_GPMI_NAND entry is already defined in an 'if MTD_NAND'
block, no need to add an extra "depends on MTD_NAND".

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-18 09:34:15 +02:00
4d54df4335
mtd: rawnand: qcom: erased page bitflips detection
NAND parts can have bitflips in an erased page due to the
process technology used. In this case, QCOM NAND controller
is not able to identify that page as an erased page.
Currently the driver calls nand_check_erased_ecc_chunk() for
identifying the erased pages but this won’t work always since the
checking is being with ECC engine returned data. In case of
bitflips, the ECC engine tries to correct the data and then it
generates the uncorrectable error. Now, this data is not equal to
original raw data. For erased CW identification, the raw data
should be read again from NAND device and this
nand_check_erased_ecc_chunk function() should be called for raw
data only.

Now following logic is being added to identify the erased
codeword bitflips.

1. In most of the cases, not all the codewords will have bitflips
   and only single CW will have bitflips. So, there is no need to
   read the complete raw page data. The NAND raw read can be
   scheduled for any CW in page. The NAND controller works on CW
   basis and it will update the status register after each CW read.
   Maintain the bitmask for the CW which generated the uncorrectable
   error.
2. Do raw read for all the CW's which generated the uncorrectable
   error.
3. Both DATA and OOB need to be checked for number of 0. The
   top-level API can be called with only data buf or OOB buf so use
   chip->databuf if data buf is null and chip->oob_poi if
   OOB buf is null for copying the raw bytes temporarily.
4. For each CW, check the number of 0 in cw_data and usable
   oob bytes, The bbm and spare (unused) bytes bit flip won’t
   affect the ECC so don’t check the number of bitflips in this area.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Abhishek Sahu   authored and   Miquel Raynal   commited 2018-07-18 09:24:16 +02:00
9f43deee43
mtd: rawnand: gpmi: remove redundant variable payload_virt
Variable payload_virt is being assigned but is never used hence it is
redundant and can be removed.

Cleans up clang warning:
warning: variable 'payload_virt' set but not used [-Wunused-but-set-variable]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Colin Ian King   authored and   Miquel Raynal   commited 2018-07-18 09:24:15 +02:00
da8eb7d227
mtd: rawnand: docg4: fix the probe function error path
nand_release() should not be called on an MTD device that has not been
registered. While it should work thanks to the checks done in
mtd_device_unregister() it's a bad practice to cleanup/release
something that has not previously been initialized/allocated.

Rework the error path to follow this rule.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Miquel Raynal   commited 2018-07-18 09:24:15 +02:00
8604e6346e
mtd: rawnand: denali: optimize timing parameters for data interface
This commit improves the ->setup_data_interface() hook.

The denali_setup_data_interface() needs the frequency of clk_x
and the ratio of clk_x / clk.

The latter is currently hardcoded in the driver, like this:

  #define DENALI_CLK_X_MULT       6

The IP datasheet requires that clk_x / clk be 4, 5, or 6.  I just
chose 6 because it is the most defensive value, but it is not optimal.
By getting the clock rate of both "clk" and "clk_x", the driver can
compute the timing values more precisely.

To not break the existing platforms, the fallback value, 50 MHz is
provided.  It is true for all upstreamed platforms.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Masahiro Yamada   authored and   Miquel Raynal   commited 2018-07-18 09:24:14 +02:00
1dfac31a5a
mtd: rawnand: denali_dt: add more clocks based on IP datasheet
Currently, denali_dt.c requires a single anonymous clock, but
the Denali User's Guide requires three clocks for this IP:

 - clk: controller core clock

 - clk_x: bus interface clock

 - ecc_clk: clock at which ECC circuitry is run

This commit supports these named clocks to represent the real hardware.

For the backward compatibility, the driver still accepts a single clock
just as before.  The clk_x_rate is taken from the clock driver again if
the named clock "clk_x" is available.  This will happen only for future
DT, hence the existing DT files are not affected.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Masahiro Yamada   authored and   Miquel Raynal   commited 2018-07-18 09:24:14 +02:00
6f1fe97bec
mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
The probe function references &pdev->dev many times, and I will add
more soon.  Add 'dev' as a shorthand.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Masahiro Yamada   authored and   Miquel Raynal   commited 2018-07-18 09:24:13 +02:00
cd1beffa83
mtd: rawnand: mxc: remove __init qualifier from mxcnd_probe_dt
Using the sysfs unbind, bind nodes, mxcnd_probe and mxcnd_probe_dt can
potentially be called at any time. After the __init functions are cleaned,
mxcnd_probe_dt is no longer available. Calling it anyway causes a crash.

mxcnd_probe used to be marked as __init, this was removed years ago.
Remove the __init qualifier from from mxcnd_probe_dt as well.

Fixes: 06f2551069 ("mtd: remove use of __devinit")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Martin Kaiser   authored and   Miquel Raynal   commited 2018-07-18 09:24:13 +02:00
24f0ae995d
mtd: rawnand: provide only single helper function for ECC conf
Function nand_ecc_choose_conf() will be help for all the cases, so
other helper functions can be made static.

nand_check_ecc_caps(): Invoke nand_ecc_choose_conf() with
                       both chip->ecc.size and chip->ecc.strength
                       value set.

nand_maximize_ecc(): Invoke nand_ecc_choose_conf() with
                     NAND_ECC_MAXIMIZE flag.

nand_match_ecc_req(): Invoke nand_ecc_choose_conf() with either
                      chip->ecc.size or chip->ecc.strength value
                      set and without NAND_ECC_MAXIMIZE flag.

CC: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Abhishek Sahu   authored and   Miquel Raynal   commited 2018-07-18 09:24:10 +02:00
0cf5c7dbaa
mtd: rawnand: qcom: code reorganization for raw read
Make separate function to perform raw read for one codeword and
call this function multiple times for each codeword in case of
raw page read. This separate function will help in subsequent
patches related with erased codeword bitflip detection.

It will decrease throughput for raw page read. Raw page read
is used for debug purpose so it won't affect normal flash
operations.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Abhishek Sahu   authored and   Miquel Raynal   commited 2018-07-18 09:24:09 +02:00
85632c1719
mtd: rawnand: qcom: check for operation errors in case of raw read
Currently there is no error checking for raw read. For raw
reads, there won’t be any ECC failure but the operational
failures are possible, so schedule the NAND_FLASH_STATUS read
after each codeword.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Abhishek Sahu   authored and   Miquel Raynal   commited 2018-07-18 09:24:09 +02:00
5bc36b2bf6
mtd: rawnand: qcom: fix return value for raw page read
Fix value returned by ->read_page_raw() to be the
actual operation status, instead of always 0.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Abhishek Sahu   authored and   Miquel Raynal   commited 2018-07-18 09:24:09 +02:00
783b5bf9bd
mtd: rawnand: qcom: modify write_oob to remove read codeword part
QCOM NAND controller layout protects available OOB data bytes with
ECC also so when ecc->write_oob() is being called then it
can't update just OOB bytes. Currently, it first reads the last
codeword which includes old OOB bytes. Then it updates the old OOB
bytes with new ones and then again writes the codeword back.
The reading codeword is unnecessary since user is responsible to
have these bytes cleared to 0xFF.

This patch removes the read part and updates the OOB bytes with
data area padded with OxFF.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Abhishek Sahu   authored and   Miquel Raynal   commited 2018-07-18 09:24:08 +02:00
28eed9f6ca