mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-11-19 16:18:04 +07:00
| Message | SHA1 | |
|---|---|---|
x86/apic: Serialize LVTT and TSC_DEADLINE writes
The APIC LVTT register is MMIO mapped but the TSC_DEADLINE register is an MSR. The write to the TSC_DEADLINE MSR is not serializing, so it's not guaranteed that the write to LVTT has reached the APIC before the TSC_DEADLINE MSR is written. In such a case the write to the MSR is ignored and as a consequence the local timer interrupt never fires. The SDM decribes this issue for xAPIC and x2APIC modes. The serialization methods recommended by the SDM differ. xAPIC: "1. Memory-mapped write to LVT Timer Register, setting bits 18:17 to 10b. 2. WRMSR to the IA32_TSC_DEADLINE MSR a value much larger than current time-stamp counter. 3. If RDMSR of the IA32_TSC_DEADLINE MSR returns zero, go to step 2. 4. WRMSR to the IA32_TSC_DEADLINE MSR the desired deadline." x2APIC: "To allow for efficient access to the APIC registers in x2APIC mode, the serializing semantics of WRMSR are relaxed when writing to the APIC registers. Thus, system software should not use 'WRMSR to APIC registers in x2APIC mode' as a serializing instruction. Read and write accesses to the APIC registers will occur in program order. A WRMSR to an APIC register may complete before all preceding stores are globally visible; software can prevent this by inserting a serializing instruction, an SFENCE, or an MFENCE before the WRMSR." The xAPIC method is to just wait for the memory mapped write to hit the LVTT by checking whether the MSR write has reached the hardware. There is no reason why a proper MFENCE after the memory mapped write would not do the same. Andi Kleen confirmed that MFENCE is sufficient for the xAPIC case as well. Issue MFENCE before writing to the TSC_DEADLINE MSR. This can be done unconditionally as all CPUs which have TSC_DEADLINE also have MFENCE support. [ tglx: Massaged the changelog ] Signed-off-by: Shaohua Li <shli@fb.com> Reviewed-by: Ingo Molnar <mingo@kernel.org> Cc: <Kernel-team@fb.com> Cc: <lenb@kernel.org> Cc: <fenghua.yu@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: stable@vger.kernel.org #v3.7+ Link: http://lkml.kernel.org/r/20150909041352.GA2059853@devbig257.prn2.facebook.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
5d7c631d92 | |
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 apic updates from Thomas Gleixner:
"This udpate contains:
- rework the irq vector array to store a pointer to the irq
descriptor instead of the irq number to avoid a lookup of the irq
descriptor in the irq entry path
- lguest interrupt handling cleanups
- conversion of the local apic timer to the new clockevent callbacks
- preparatory changes for the irq argument removal of interrupt flow
handlers"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Do not dereference irq descriptor before checking it
tools/lguest: Clean up include dir
tools/lguest: Fix redefinition of struct virtio_pci_cfg_cap
x86/irq: Store irq descriptor in vector array
genirq: Provide irq_desc_has_action
x86/irq: Get rid of an indentation level
x86/irq: Rename VECTOR_UNDEFINED to VECTOR_UNUSED
x86/irq: Replace numeric constant
x86/irq: Protect smp_cleanup_move
x86/lguest: Do not setup unused irq vectors
x86/lguest: Clean up lguest_setup_irq
x86/apic: Drop local_irq_save/restore in timer callbacks
x86/apic: Migrate apic timer to new set_state interface
x86/irq: Use access helper irq_data_get_affinity_mask()
x86/irq: Use accessor irq_data_get_irq_handler_data()
x86/irq: Use accessor irq_data_get_node()
|
43af9872f5 | |
Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm changes from Ingo Molnar:
"The biggest changes in this cycle were:
- Revamp, simplify (and in some cases fix) Time Stamp Counter (TSC)
primitives. (Andy Lutomirski)
- Add new, comprehensible entry and exit handlers written in C.
(Andy Lutomirski)
- vm86 mode cleanups and fixes. (Brian Gerst)
- 32-bit compat code cleanups. (Brian Gerst)
The amount of simplification in low level assembly code is already
palpable:
arch/x86/entry/entry_32.S | 130 +----
arch/x86/entry/entry_64.S | 197 ++-----
but more simplifications are planned.
There's also the usual laudry mix of low level changes - see the
changelog for details"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (83 commits)
x86/asm: Drop repeated macro of X86_EFLAGS_AC definition
x86/asm/msr: Make wrmsrl() a function
x86/asm/delay: Introduce an MWAITX-based delay with a configurable timer
x86/asm: Add MONITORX/MWAITX instruction support
x86/traps: Weaken context tracking entry assertions
x86/asm/tsc: Add rdtscll() merge helper
selftests/x86: Add syscall_nt selftest
selftests/x86: Disable sigreturn_64
x86/vdso: Emit a GNU hash
x86/entry: Remove do_notify_resume(), syscall_trace_leave(), and their TIF masks
x86/entry/32: Migrate to C exit path
x86/entry/32: Remove 32-bit syscall audit optimizations
x86/vm86: Rename vm86->v86flags and v86mask
x86/vm86: Rename vm86->vm86_info to user_vm86
x86/vm86: Clean up vm86.h includes
x86/vm86: Move the vm86 IRQ definitions to vm86.h
x86/vm86: Use the normal pt_regs area for vm86
x86/vm86: Eliminate 'struct kernel_vm86_struct'
x86/vm86: Move fields from 'struct kernel_vm86_struct' to 'struct vm86'
x86/vm86: Move vm86 fields out of 'thread_struct'
...
|
5778077d03 | |
x86/apic: Fix fallout from x2apic cleanup
In the recent x2apic cleanup I got two things really wrong:
1) The safety check in __disable_x2apic which allows the function to
be called unconditionally is backwards. The check is there to
prevent access to the apic MSR in case that the machine has no
apic. Though right now it returns if the machine has an apic and
therefor the disabling of x2apic is never invoked.
2) x2apic_disable() sets x2apic_mode to 0 after registering the local
apic. That's wrong, because register_lapic_address() checks x2apic
mode and therefor takes the wrong code path.
This results in boot failures on machines with x2apic preenabled by
BIOS and can also lead to an fatal MSR access on machines without
apic.
The solutions are simple:
1) Correct the sanity check for apic availability
2) Clear x2apic_mode _before_ calling register_lapic_address()
Fixes:
|
a57e456a7b | |
x86/apic: Drop local_irq_save/restore in timer callbacks
These callbacks are called with interrupts disabled from the core code. Fixup the local caller to disable interrupts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> |
c948c26048 | |
x86/apic: Migrate apic timer to new set_state interface
Migrate apic driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. We weren't doing anything while switching to resume mode and so that callback isn't implemented. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: linaro-kernel@lists.linaro.org Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: Bandan Das <bsd@redhat.com> Link: http://lkml.kernel.org/r/1896ac5989d27f2ac37f4786af9bd537e1921b83.1437042675.git.viresh.kumar@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
b23d8e5278 | |
x86/asm/tsc: Rename native_read_tsc() to rdtsc()
Now that there is no paravirt TSC, the "native" is inappropriate. The function does RDTSC, so give it the obvious name: rdtsc(). Suggested-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/fd43e16281991f096c1e4d21574d9e1402c62d39.1434501121.git.luto@kernel.org [ Ported it to v4.2-rc1. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
4ea1636b04 | |
x86/asm/tsc: Replace rdtscll() with native_read_tsc()
Now that the ->read_tsc() paravirt hook is gone, rdtscll() is just a wrapper around native_read_tsc(). Unwrap it. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Huang Rui <ray.huang@amd.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm ML <kvm@vger.kernel.org> Link: http://lkml.kernel.org/r/d2449ae62c1b1fb90195bcfb19ef4a35883a04dc.1434501121.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> |
87be28aaf1 | |
x86/apic: Remove verify_local_APIC()
__verify_local_APIC() is detritus from the early APIC days. Its return value isn't used anywhere and the information it prints when debug is enabled is already part of APIC initialization messages printed to syslog. Off with it! Signed-off-by: Bandan Das <bsd@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/jpgy4mcsxsq.fsf@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
4399c03c67 | |
Revert "x86/apic: Only disable CPU x2apic mode when necessary"
This reverts commit
|
8329aa9fff | |
x86: Consolidate boot cpu timer setup
Now that the APIC bringup is consolidated we can move the setup call for the percpu clock event device to apic_bsp_setup(). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211704.162567839@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
9c4d9c73dd | |
x86/apic: Reuse apic_bsp_setup() for UP APIC setup
Extend apic_bsp_setup() so the same code flow can be used for APIC_init_uniprocessor(). Folded Jiangs fix to provide proper ordering of the UP setup. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211704.084765674@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
374aab339f | |
x86/smpboot: Move apic init code to apic.c
We better provide proper functions which implement the required code flow in the apic code rather than letting the smpboot code open code it. That allows to make more functions static and confines the APIC functionality to apic.c where it belongs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.907616730@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
05f7e46d2a | |
init: Get rid of x86isms
The UP local API support can be set up from an early initcall. No need for horrible hackery in the init code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.827943883@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
30b8b0066c | |
x86/apic: Move apic_init_uniprocessor code
Move the code to a different place so we can make other functions inline. Preparatory patch for further cleanups. No change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.731329006@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
e714a91f92 | |
x86/apic: Sanitize ioapic handling
We have proper stubs for the IOAPIC=n case and the setup/enable function have the required checks inside now. Remove the ifdeffery and the copy&pasted conditionals. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>C Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.569830549@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
35e4c6d30e | |
x86/x2apic: Use state information for disable
Use the state information to simplify the disable logic further. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.209387598@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
6d2d49d2cd | |
x86/x2apic: Split enable and setup function
enable_x2apic() is a convoluted unreadable mess because it is used for both enablement in early boot and for setup in cpu_init(). Split the code into x2apic_enable() for enablement and x2apic_setup() for setup of (secondary cpus). Make use of the new state tracking to simplify the logic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.129287153@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
659006bf3a | |
x86/x2apic: Disable x2apic from nox2apic setup
There is no point in postponing the hardware disablement of x2apic. It can be disabled right away in the nox2apic setup function. Disable it right away and set the state to DISABLED . This allows to remove all the nox2apic conditionals all over the place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.051214090@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
44e25ff9e6 | |
x86/x2apic: Add proper state tracking
Having 3 different variables to track the state is just silly and error prone. Add a proper state tracking variable which covers the three possible states: ON/OFF/DISABLED. We cannot use x2apic_mode for this as this would require to change all users of x2apic_mode with explicit comparisons for a state value instead of treating it as boolean. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.955392443@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
12e189d3cf | |
x86/x2apic: Clarify remapping mode for x2apic enablement
Rename the argument of try_to_enable_x2apic() so the purpose becomes more clear. Make the pr_warning more consistent and avoid the double print of "disabling". Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.876012628@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
62e61633da | |
x86/x2apic: Move code in conditional region
No point in having try_to_enable_x2apic() outside of the CONFIG_X86_X2APIC section and having inline functions and more ifdefs to deal with it. Move the code into the existing ifdef section and remove the inline cruft. Fixup the printk about not enabling interrupt remapping as suggested by Boris. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.795388613@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
55eae7de72 | |
x86/apic: Check x2apic early
No point in delaying the x2apic detection for the CONFIG_X86_X2APIC=n case to enable_IR_x2apic(). We rather detect that before we try to setup anything there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.702479404@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
d524165cb8 | |
x86/apic: Make disable x2apic work really
If x2apic_preenabled is not enabled, then disable_x2apic() is not called from various places which results in x2apic_disabled not being set. So other code pathes can happily reenable the x2apic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.621431109@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
9aa1636527 | |
x86/ioapic: Check x2apic really
The x2apic_preenabled flag is just a horrible hack and if X2APIC support is disabled it does not reflect the actual hardware state. Check the hardware instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.541280622@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
2ca5b40479 | |
x86/apic: Move x2apic code to one place
Having several disjunct pieces of code for x2apic support makes reading the code unnecessarily hard. Move it to one ifdeffed section. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.445212133@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
bfb0507029 | |
x86/apic: Make x2apic_mode depend on CONFIG_X86_X2APIC
No point in having a static variable around which is always 0. Let the compiler optimize code out if disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.363274310@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
81a46dd824 | |
x86/apic: Avoid open coded x2apic detection
enable_IR_x2apic() grew a open coded x2apic detection. Implement a proper helper function which shares the code with the already existing x2apic_enabled(). Made it use rdmsrl_safe as suggested by Boris. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.285038186@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
8d80696060 | |
iommu/irq_remapping: Kill function irq_remapping_supported() and related code
Simplify irq_remapping code by killing irq_remapping_supported() and related interfaces. Joerg posted a similar patch at https://lkml.org/lkml/2014/12/15/490, so assume an signed-off from Joerg. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-14-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
c392f56c94 | |
x86/apic: Only disable CPU x2apic mode when necessary
When interrupt remapping hardware is not in X2APIC, CPU X2APIC mode will be disabled if: 1) Maximum CPU APIC ID is bigger than 255 2) hypervisior doesn't support x2apic mode. But we should only check whether hypervisor supports X2APIC mode when hypervisor(CONFIG_HYPERVISOR_GUEST) is enabled, otherwise X2APIC will always be disabled when CONFIG_HYPERVISOR_GUEST is disabled and IR doesn't work in X2APIC mode. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Tested-by: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-12-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
5fcee53ce7 | |
x86/apic: Handle XAPIC remap mode proper.
If remapping is in XAPIC mode, the setup code just skips X2APIC initialization without checking max CPU APIC ID in system, which may cause problem if system has a CPU with APIC ID bigger than 255. Handle IR in XAPIC mode the same way as if remapping is disabled. [ tglx: Split out from previous patch ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
ef1b2b8ad1 | |
x86/apic: Refine enable_IR_x2apic() and related functions
Refine enable_IR_x2apic() and related functions for better readability. [ tglx: Removed the XAPIC mode change and split it out into a seperate patch. Added comments. ] Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-8-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
07806c50bd | |
x86/apic: Correctly detect X2APIC status in function enable_IR()
X2APIC will be disabled if user specifies "nox2apic" on kernel command line, even when x2apic_preenabled is true. So correctly detect X2APIC status by using x2apic_enabled() instead of x2apic_preenabled. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-7-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
89356cf20e | |
x86/apic: Kill useless variable x2apic_enabled in function enable_IR_x2apic()
Local variable x2apic_enabled has been assigned to but never referred, so kill it. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-6-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
7f530a2771 | |
x86/apic: Panic if kernel doesn't support x2apic but BIOS has enabled x2apic
When kernel doesn't support X2APIC but BIOS has enabled X2APIC, system may panic or hang without useful messages. On the other hand, it's hard to dynamically disable X2APIC when CONFIG_X86_X2APIC is disabled. So panic with a clear message in such a case. Now system panics as below when X2APIC is disabled and interrupt remapping is enabled: [ 0.316118] LAPIC pending interrupts after 512 EOI [ 0.322126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.368655] Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC [ 0.378300] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.0+ #340 [ 0.385300] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0051.L05.1406240953 06/24/2014 [ 0.396997] ffff88046dc03000 ffff88046c307dd8 ffffffff8179dada 00000000000043f2 [ 0.405629] ffffffff81a92158 ffff88046c307e58 ffffffff8179b757 0000000000000002 [ 0.414261] 0000000000000008 ffff88046c307e68 ffff88046c307e08 ffffffff813ad82b [ 0.422890] Call Trace: [ 0.425711] [<ffffffff8179dada>] dump_stack+0x45/0x57 [ 0.431533] [<ffffffff8179b757>] panic+0xc1/0x1f5 [ 0.436978] [<ffffffff813ad82b>] ? delay_tsc+0x3b/0x70 [ 0.442910] [<ffffffff8166fa2c>] panic_if_irq_remap+0x1c/0x20 [ 0.449524] [<ffffffff81d73645>] setup_IO_APIC+0x405/0x82e [ 0.464979] [<ffffffff81d6fcc2>] native_smp_prepare_cpus+0x2d9/0x31c [ 0.472274] [<ffffffff81d5d0ac>] kernel_init_freeable+0xd6/0x223 [ 0.479170] [<ffffffff81792ad0>] ? rest_init+0x80/0x80 [ 0.485099] [<ffffffff81792ade>] kernel_init+0xe/0xf0 [ 0.490932] [<ffffffff817a537c>] ret_from_fork+0x7c/0xb0 [ 0.497054] [<ffffffff81792ad0>] ? rest_init+0x80/0x80 [ 0.502983] ---[ end Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC System hangs as below when X2APIC and interrupt remapping are both disabled: [ 1.102782] pci 0000:00:02.0: System wakeup disabled by ACPI [ 1.109351] pci 0000:00:03.0: System wakeup disabled by ACPI [ 1.115915] pci 0000:00:03.2: System wakeup disabled by ACPI [ 1.122479] pci 0000:00:03.3: System wakeup disabled by ACPI [ 1.132274] pci 0000:00:1c.0: Enabling MPC IRBNCE [ 1.137620] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled [ 1.145239] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.151790] pci 0000:00:1c.7: Enabling MPC IRBNCE [ 1.157128] pci 0000:00:1c.7: Intel PCH root port ACS workaround enabled [ 1.164748] pci 0000:00:1c.7: System wakeup disabled by ACPI [ 1.171447] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 1.178612] acpiphp: Slot [8] registered [ 1.183095] pci 0000:00:02.0: PCI bridge to [bus 01] [ 1.188867] acpiphp: Slot [2] registered With this patch applied, the system panics in both cases with a proper panic message. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Tony Luck <tony.luck@intel.com> Cc: iommu@lists.linux-foundation.org Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Jan Beulich <JBeulich@suse.com> Cc: Richard Weinberger <richard@nod.at> Cc: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1420615903-28253-5-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
2599094f6e | |
x86/apic: Clear stale x2apic mode
If x2apic got disabled on the kernel command line, then the following
issue can happen:
enable_IR_x2apic()
....
x2apic_mode = 1;
enable_x2apic();
if (x2apic_disabled) {
__disable_x2apic();
return;
}
That leaves X2APIC disabled in hardware, but x2apic_mode stays 1. So
all other code which checks x2apic_mode gets the wrong information.
Set x2apic_mode to 0 after disabling it in hardware.
This is just a hotfix. The proper solution is to rework this code so
it has seperate functions for the initial setup on the boot processor
and the secondary cpus, but that's beyond the scope of this fix.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
|
f7ccadac2d | |
iommu, x86: Restructure setup of the irq remapping feature
enable_IR_x2apic() calls setup_irq_remapping_ops() which by default
installs the intel dmar remapping ops and then calls the amd iommu irq
remapping prepare callback to figure out whether we are running on an
AMD machine with irq remapping hardware.
Right after that it calls irq_remapping_prepare() which pointlessly
checks:
if (!remap_ops || !remap_ops->prepare)
return -ENODEV;
and then calls
remap_ops->prepare()
which is silly in the AMD case as it got called from
setup_irq_remapping_ops() already a few microseconds ago.
Simplify this and just collapse everything into
irq_remapping_prepare().
The irq_remapping_prepare() remains still silly as it assigns blindly
the intel ops, but that's not scope of this patch.
The scope here is to move the preperatory work, i.e. memory
allocations out of the atomic section which is required to enable irq
remapping.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Acked-and-tested-by: Joerg Roedel <joro@8bytes.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Oren Twaig <oren@scalemp.com>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20141205084147.232633738@linutronix.de
Link: http://lkml.kernel.org/r/1420615903-28253-2-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
a1dafe857d | |
x86: Avoid building unused IRQ entry stubs
When X86_LOCAL_APIC (i.e. unconditionally on x86-64), first_system_vector will never end up being higher than LOCAL_TIMER_VECTOR (0xef), and hence building stubs for vectors 0xef...0xff is pointlessly reducing code density. Deal with this at build time already. Taking into consideration that X86_64 implies X86_LOCAL_APIC, also simplify (and hence make easier to read and more consistent with the change done here) some #if-s in arch/x86/kernel/irqinit.c. While we could further improve the packing of the IRQ entry stubs (the four ones now left in the last set could be fit into the four padding bytes each of the final four sets have) this doesn't seem to provide any real benefit: Both irq_entries_start and common_interrupt getting cache line aligned, eliminating the 30th set would just produce 32 bytes of padding between the 29th and common_interrupt. [ tglx: Folded lguest fix from Dan Carpenter ] Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: lguest@lists.ozlabs.org Cc: Rusty Russell <rusty@rustcorp.com.au> Link: http://lkml.kernel.org/r/54574D5F0200007800044389@mail.emea.novell.com Link: http://lkml.kernel.org/r/20141115185718.GB6530@mwanda Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
2414e021ac | |
Linux 3.18-rc1
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJURGCfAAoJEHm+PkMAQRiG6toH/RUazjqZxqMvLlm1y+O6+7s9 OpFdcDl4ZQtrvymBRYipu46pbDUoAAsVbxQJllaLNtHE0UrvaQE76WihBQYM8qW/ WoESLsZRbNQqQYQixf55pOozX7uIuG+9LKHagC8JNfD1Bw/nQ+RleSXqFsBCdpMW i7SzcZBu2Iv+LnVmjvoGMOQa+loKzO6Pj1MpoHxxJQmeypH3dZR7mLVeBJNZQtLE BGY47gYraVzb9EjKnSbjrIKjpM9o0MIihoanrrjnq0JMrfm4pi6W5GgaGDUiaBVH w7Vmr5S2pjzrS41gKSVK9/XO1CrDG8tsp3QwA2+iIbjdR3wBDynyeG3UfnLABec= =hwbG -----END PGP SIGNATURE----- Merge tag 'v3.18-rc1' into x86/urgent Reason: Need to apply audit patch on top of v3.18-rc1. Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
db65bcfd95 | |
x86, apic: Handle a bad TSC more gracefully
If the TSC is unusable or disabled, then this patch fixes: - Confusion while trying to clear old APIC interrupts. - Division by zero and incorrect programming of the TSC deadline timer. This fixes boot if the CPU has a TSC deadline timer but a missing or broken TSC. The failure to boot can be observed with qemu using -cpu qemu64,-tsc,+tsc-deadline This also happens to me in nested KVM for unknown reasons. With this patch, I can boot cleanly (although without a TSC). Signed-off-by: Andy Lutomirski <luto@amacapital.net> Cc: Bandan Das <bsd@redhat.com> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/e2fa274e498c33988efac0ba8b7e3120f7f92d78.1413393027.git.luto@amacapital.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
b47dcbdc51 | |
x86: Replace __get_cpu_var uses
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x). This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.
Other use cases are for storing and retrieving data from the current
processors percpu area. __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.
__get_cpu_var() is defined as :
#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))
__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.
this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.
This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset. Thereby address calculations are avoided and less registers
are used when code is generated.
Transformations done to __get_cpu_var()
1. Determine the address of the percpu instance of the current processor.
DEFINE_PER_CPU(int, y);
int *x = &__get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(&y);
2. Same as #1 but this time an array structure is involved.
DEFINE_PER_CPU(int, y[20]);
int *x = __get_cpu_var(y);
Converts to
int *x = this_cpu_ptr(y);
3. Retrieve the content of the current processors instance of a per cpu
variable.
DEFINE_PER_CPU(int, y);
int x = __get_cpu_var(y)
Converts to
int x = __this_cpu_read(y);
4. Retrieve the content of a percpu struct
DEFINE_PER_CPU(struct mystruct, y);
struct mystruct x = __get_cpu_var(y);
Converts to
memcpy(&x, this_cpu_ptr(&y), sizeof(x));
5. Assignment to a per cpu variable
DEFINE_PER_CPU(int, y)
__get_cpu_var(y) = x;
Converts to
__this_cpu_write(y, x);
6. Increment/Decrement etc of a per cpu variable
DEFINE_PER_CPU(int, y);
__get_cpu_var(y)++
Converts to
__this_cpu_inc(y)
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Acked-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
89cbc76768 | |
x86, apic: Remove enable_apic_mode callback
The enable_apic_mode() apic callback is never called, so remove it. Signed-off-by: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302352320.17503@chino.kir.corp.google.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
2f078b9cb8 | |
x86, apic: Remove x86_32_numa_cpu_node callback
Since commit
|
80a2670379 | |
x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
When a vSMP Foundation box is detected, the function apic_cluster_num() counts the number of APIC clusters found. If more than one found, a multi board configuration is assumed, and TSC marked as unstable. This behavior is incorrect as vSMP Foundation may use processors from single node only, attached to memory of other nodes - and such node may have more than one APIC cluster (typically any recent intel box has more than single APIC_CLUSTERID(x)). To fix this, we simply remove the code which detects a vSMP Foundation box and affects apic_is_clusted_box() return value. This can be done because later the kernel checks by itself if the TSC is stable using the check_tsc_sync_[source|target]() functions and marks TSC as unstable if needed. Acked-by: Shai Fultheim <shai@scalemp.com> Signed-off-by: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1404036068-11674-1-git-send-email-oren@scalemp.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
411cf9ee29 | |
x86, mpparse: Simplify arch/x86/include/asm/mpspec.h
Simplify arch/x86/include/asm/mpspec.h by 1) Change max_physical_apicid to static as it's only used in apic.c. 2) Kill declaration of mpc_default_type, it's never defined. 3) Delete default_acpi_madt_oem_check(), it has already been declared in apic.h. 4) Make default_acpi_madt_oem_check() depends on CONFIG_X86_LOCAL_APIC instead of CONFIG_X86_64 to support i386. 5) Change mp_override_legacy_irq(), mp_config_acpi_legacy_irqs() and mp_register_gsi() as static because they are only used in acpi/boot.c. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Richard Weinberger <richard@nod.at> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1402302011-23642-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
a491cc902c | |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"This is a collection of minor fixes for x86, plus the IRET information
leak fix (forbid the use of 16-bit segments in 64-bit mode)"
NOTE! We may have to relax the "forbid the use of 16-bit segments in
64-bit mode" part, since there may be people who still run and depend on
16-bit Windows binaries under Wine.
But I'm taking this in the current unconditional form for now to see who
(if anybody) screams bloody murder. Maybe nobody cares. And maybe
we'll have to update it with some kind of runtime enablement (like our
vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already
need to tweak).
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
efi: Pass correct file handle to efi_file_{read,close}
x86/efi: Correct EFI boot stub use of code32_start
x86/efi: Fix boot failure with EFI stub
x86/platform/hyperv: Handle VMBUS driver being a module
x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround
x86, CMCI: Add proper detection of end of CMCI storms
|
8eab6cd031 | |
Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 old platform removal from Peter Anvin: "This patchset removes support for several completely obsolete platforms, where the maintainers either have completely vanished or acked the removal. For some of them it is questionable if there even exists functional specimens of the hardware" Geert Uytterhoeven apparently thought this was a April Fool's pull request ;) * 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, platforms: Remove NUMAQ x86, platforms: Remove SGI Visual Workstation x86, apic: Remove support for IBM Summit/EXA chipset x86, apic: Remove support for ia32-based Unisys ES7000 |
467cbd207a | |
x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround
A change introduced with commit
|
023de4a09f | |
x86/apic: Plug racy xAPIC access of CPU hotplug code
apic_icr_write() and its users in smpboot.c were apparently written under the assumption that this code would only run during early boot. But nowadays we also execute it when onlining a CPU later on while the system is fully running. That will make wakeup_cpu_via_init_nmi and, thus, also native_apic_icr_write run in plain process context. If we migrate the caller to a different CPU at the wrong time or interrupt it and write to ICR/ICR2 to send unrelated IPIs, we can end up sending INIT, SIPI or NMIs to wrong CPUs. Fix this by disabling interrupts during the write to the ICR halves and disable preemption around waiting for ICR availability and using it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-By: Igor Mammedov <imammedo@redhat.com> Link: http://lkml.kernel.org/r/52E6AFFE.3030004@siemens.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
ea7bdc65bc | |
x86, platforms: Remove SGI Visual Workstation
The SGI Visual Workstation seems to be dead; remove support so we don't have to continue maintaining it. Cc: Andrey Panin <pazke@donpac.ru> Cc: Michael Reed <mdr@sgi.com> Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
c5f9ee3d66 |