Watch
1
0
Fork
You've already forked kernel_a52xq
0
mirror of https://github.com/a52xq-dev/kernel.git synced 2026-11-22 01:46:57 +07:00
Commit graph kernel_a52xq/drivers/mtd/nand/raw/nand_micron.c
Message SHA1
mtd: rawnand: micron: add fixup for ONFI revision
Some Micron NAND chips (MT29F1G08ABAFAWP-ITE:F) report 00 00 for the
revision number field of the ONFI parameter page. Rather than rejecting
these outright assume ONFI version 1.0 if the revision number is 00 00.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Chris Packham   authored and   Miquel Raynal   commited 2018-07-02 09:02:28 +02:00
243f37cb1f
mtd: rawnand: micron: Update ecc_stats.corrected
Even if we can't update ecc_stats.corrected with an accurate value we
should at least increase the number of bitflips so that MTD users can
know that there was some bitflips.

Just add chip->ecc.strength to mtd->ecc_stats.corrected which should
account for the worst case situation.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

Boris Brezillon   authored and   Miquel Raynal   commited 2018-07-02 09:01:34 +02:00
ac8cf0b9e7
mtd: rawnand: micron: add ONFI_FEATURE_ON_DIE_ECC to supported features
Add ONFI_FEATURE_ON_DIE_ECC to the set/get features list for Micron
NAND flash.

Fixes: 789157e41a ("mtd: rawnand: allow vendors to declare (un)supported features")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

Chris Packham   authored and   Boris Brezillon   commited 2018-06-19 11:12:30 +02:00
12baf77211
mtd: rawnand: allow vendors to declare (un)supported features
If SET/GET_FEATURES is available (from the parameter page), use a
bitmap to declare what feature is actually supported.

Initialize the bitmap in the core to support timing changes (only
feature used by the core), also add support for Micron specific features
used in Micron initialization code (in the init routine).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

Miquel Raynal   authored and   Boris Brezillon   commited 2018-03-20 11:59:58 +01:00
789157e41a
mtd: rawnand: prepare the removal of the ONFI parameter page
The NAND chip parameter page is statically allocated within the
nand_chip structure, which reserves a lot of space. Even not ONFI nor
JEDEC chips have it embedded. Also, only a few parameters are actually
read from the parameter page after the detection.

ONFI-related parameters that will be used outside from the
identification function are stored in a separate onfi_parameters
structure embedded in nand_parameters, this small structure that
already hold generic parameters.

For now, the onfi_parameters structure is allocated statically. However,
after some deep rework in the NAND framework, it will be possible to do
dynamic allocations from the NAND identification phase, and this
strcuture will then be dynamically allocated when needed.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

Miquel Raynal   authored and   Boris Brezillon   commited 2018-03-20 11:59:54 +01:00
a97421c753
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
Prepare the fact that some features managed by GET/SET_FEATURES could be
overloaded by vendor code. To handle this logic, use new wrappers
instead of directly call the ->get/set_features() hooks.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

Miquel Raynal   authored and   Boris Brezillon   commited 2018-03-20 09:46:02 +01:00
97baea1e6b
mtd: rawnand: rename SET/GET FEATURES related functions
SET/GET FEATURES are flagged ONFI-compliant because of their name. This
is not accurate as non-ONFI NAND chips support it and use it.

Rename the hooks and helpers to remove the "onfi" prefix.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

Miquel Raynal   authored and   Boris Brezillon   commited 2018-03-20 09:33:22 +01:00
b958758e68
mtd: nand: move raw NAND related code to the raw/ subdir
As part of the process of sharing more code between different NAND
based devices, we need to move all raw NAND related code to the raw/
subdirectory.

Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>

Boris Brezillon   commited 2018-02-16 10:09:34 +01:00
93db446a42
Renamed from drivers/mtd/nand/nand_micron.c (Browse further)