mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-11-22 01:46:57 +07:00
| Message | SHA1 | |
|---|---|---|
mtd: rawnand: provide only single helper function for ECC conf
Function nand_ecc_choose_conf() will be help for all the cases, so
other helper functions can be made static.
nand_check_ecc_caps(): Invoke nand_ecc_choose_conf() with
both chip->ecc.size and chip->ecc.strength
value set.
nand_maximize_ecc(): Invoke nand_ecc_choose_conf() with
NAND_ECC_MAXIMIZE flag.
nand_match_ecc_req(): Invoke nand_ecc_choose_conf() with either
chip->ecc.size or chip->ecc.strength value
set and without NAND_ECC_MAXIMIZE flag.
CC: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
0cf5c7dbaa | |
mtd: rawnand: helper function for setting up ECC configuration
commit
|
181ace9e1b | |
mtd: rawnand: add defines for ONFI version bits
Add defines for the ONFI version bits and use them in nand_flash_detect_onfi(). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> |
872b71ff08 | |
mtd: rawnand: add manufacturer fixup for ONFI parameter page
This is called after the ONFI parameter page checksum is verified and allows us to override the contents of the parameter page. Suggested-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> |
00ce4e039a | |
mtd: rawnand: add an option to specify NAND chip as a boot device
Allow to define a NAND chip as a boot device. This can be helpful for the selection of the ECC algorithm and strength in case the boot ROM supports only a subset of controller provided options. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> |
f922bd798b | |
mtd: rawnand: add Reed-Solomon error correction algorithm
Add Reed-Solomon (RS) to the enumeration of ECC algorithms. Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> |
f308d7353d | |
mtd: rawnand: fix return value check for bad block status
Positive return value from read_oob() is making false BAD
blocks. For some of the NAND controllers, OOB bytes will be
protected with ECC and read_oob() will return number of bitflips.
If there is any bitflip in ECC protected OOB bytes for BAD block
status page, then that block is getting treated as BAD.
Fixes:
|
e9893e6fa9 | |
MTD changes:
Core changes:
- Add a sysfs attribute to expose available OOB size
Driver changes:
- Remove HAS_DMA dependency on various drivers
- Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
- Replace msleep by usleep_range() in the dataflash driver
- Avoid VLA usage in nftl layers
- Remove useless .owner assignment in pismo
- Fix various issues in the CFI driver
- Improve TRX partition handling expose a DT compat for this part
parser
- Clarify OFFSET_CONTINUOUS meaning
NAND changes:
Core changes:
- Add Miquel as a NAND maintainer
- Add access mode to the nand_page_io_req struct
- Fix kernel-doc in rawnand.h
- Support bit-wise majority to recover from corrupted ONFI parameter
pages
- Stop checking FAIL bit after a SET_FEATURES, as documented in the
ONFI spec
Raw NAND Driver changes:
- Fix and cleanup the error path of many NAND controller drivers
- GPMI:
* Cleanup/simplification of a few aspects in the driver
* Take ECC setup specified in the DT into account
- sunxi: remove support for GPIO-based R/B polling
- MTK:
* Use of_device_get_match_data() instead of of_match_device()
* Add an entry in MAINTAINERS for this driver
* Fix nand-ecc-step-size and nand-ecc-strength description in the DT
bindings doc
- fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page
OneNAND driver changes:
- samsung: use dev_get_drvdata() instead of platform_get_drvdata()
SPI NOR changes:
Core changes:
- Add support for a bunch of SPI NOR chips
- Clear EAR reg when switching to 3-byte addressing mode on Winbond
chips
SPI NOR controller driver changes:
- cadence: Add DMA support for direct mode reads
- hisi: Prefix a few functions with hisi_
- intel:
* Mark the driver as "dangerous" in Kconfig
* Fix atomic sequence handling
* Pass a 40us delay (instead of 0us) to readl_poll_timeout()
- fsl:
* fix a typo in a function name
* add support for IP variants embedded in the ls2080a and ls1080a
SoCs
- stm32: request exclusive control of the reset line
-----BEGIN PGP SIGNATURE-----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=cHjU
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd
Pull MTD updates from Boris Brezillon:
"Core changes:
- Add a sysfs attribute to expose available OOB size
Driver changes:
- Remove HAS_DMA dependency on various drivers
- Use dev_get_drvdata() instead of platform_get_drvdata() in docg3
- Replace msleep by usleep_range() in the dataflash driver
- Avoid VLA usage in nftl layers
- Remove useless .owner assignment in pismo
- Fix various issues in the CFI driver
- Improve TRX partition handling expose a DT compat for this part
parser
- Clarify OFFSET_CONTINUOUS meaning
NAND core changes:
- Add Miquel as a NAND maintainer
- Add access mode to the nand_page_io_req struct
- Fix kernel-doc in rawnand.h
- Support bit-wise majority to recover from corrupted ONFI parameter
pages
- Stop checking FAIL bit after a SET_FEATURES, as documented in the
ONFI spec
Raw NAND Driver changes:
- Fix and cleanup the error path of many NAND controller drivers
- GPMI:
+ Cleanup/simplification of a few aspects in the driver
+ Take ECC setup specified in the DT into account
- sunxi: remove support for GPIO-based R/B polling
- MTK:
+ Use of_device_get_match_data() instead of of_match_device()
+ Add an entry in MAINTAINERS for this driver
+ Fix nand-ecc-step-size and nand-ecc-strength description in the
DT bindings doc
- fsl_ifc: fix ->cmdfunc() to read more than one ONFI parameter page
OneNAND driver changes:
- samsung: use dev_get_drvdata() instead of platform_get_drvdata()
SPI NOR core changes:
- Add support for a bunch of SPI NOR chips
- Clear EAR reg when switching to 3-byte addressing mode on Winbond
chips
SPI NOR controller driver changes:
- cadence: Add DMA support for direct mode reads
- hisi: Prefix a few functions with hisi_
- intel:
+ Mark the driver as "dangerous" in Kconfig
+ Fix atomic sequence handling
+ Pass a 40us delay (instead of 0us) to readl_poll_timeout()
- fsl:
+ fix a typo in a function name
+ add support for IP variants embedded in the ls2080a and ls1080a
SoCs
- stm32: request exclusive control of the reset line"
* tag 'mtd/for-4.18' of git://git.infradead.org/linux-mtd: (66 commits)
mtd: nand: Pass mode information to nand_page_io_req
mtd: cfi_cmdset_0002: Change erase one block to enable XIP once
mtd: cfi_cmdset_0002: Change erase functions to check chip good only
mtd: cfi_cmdset_0002: Change erase functions to retry for error
mtd: cfi_cmdset_0002: Change definition naming to retry write operation
mtd: cfi_cmdset_0002: Change write buffer to check correct value
mtd: cmdlinepart: Update comment for introduction of OFFSET_CONTINUOUS
mtd: bcm47xxpart: add of_match_table with a new DT binding
dt-bindings: mtd: document Broadcom's BCM47xx partitions
mtd: spi-nor: Add support for EN25QH32
mtd: spi-nor: Add support for is25wp series chips
mtd: spi-nor: Add Winbond w25q32jv support
mtd: spi-nor: fsl-quadspi: add support for ls2080a/ls1080a
mtd: spi-nor: stm32-quadspi: explicitly request exclusive reset control
mtd: spi-nor: intel: provide a range for poll_timout
mtd: spi-nor: fsl-quadspi: fix api naming typo _init_ahb_read
mtd: spi-nor: intel-spi: Explicitly mark the driver as dangerous in Kconfig
mtd: spi-nor: intel-spi: Fix atomic sequence handling
mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op
mtd: rawnand: use bit-wise majority to recover the ONFI param page
...
|
f4e70c2e5f | |
mtd: rawnand: Do not check FAIL bit when executing a SET_FEATURES op
The ONFI spec clearly says that FAIL bit is only valid for PROGRAM,
ERASE and READ-with-on-die-ECC operations, and should be ignored
otherwise.
It seems that checking it after sending a SET_FEATURES is a bad idea
because a previous READ, PROGRAM or ERASE op may have failed, and
depending on the implementation, the FAIL bit is not cleared until a
new READ, PROGRAM or ERASE is started.
This leads to ->set_features() returning -EIO while it actually worked,
which can sometimes stop a batch of READ/PROGRAM ops.
Note that we only fix the ->exec_op() path here, because some drivers
are abusing the NAND_STATUS_FAIL flag in their ->waitfunc()
implementation to propagate other kind of errors, like
wait-ready-timeout or controller-related errors. Let's not try to fix
those drivers since they worked fine so far.
Fixes:
|
782d1967d0 | |
mtd: rawnand: use bit-wise majority to recover the ONFI param page
Per ONFI specification (Rev. 4.0), if all parameter pages have invalid CRC values, the bit-wise majority may be used to recover the contents of the parameter page from the parameter page copies present. Signed-off-by: Jane Wan <Jane.Wan@nokia.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
39138c1f4a | |
mtd: rawnand: Make sure we wait tWB before polling the STATUS reg
NAND chips require a bit of time to take the NAND operation into
account and set the BUSY bit in the STATUS reg. Make sure we don't poll
the STATUS reg too early in nand_soft_waitrdy().
Fixes:
|
3057fcef38 | |
mtd: rawnand: add a way to pass an ID table with nand_scan()
As part of the work of migrating all the drivers to nand_scan(), and because nand_scan() does not provide a way to pass an ID table, rename the function nand_scan_with_ids() and add a third parameter to give a flash ID table (like what was done with nand_scan_ident()). Create a nand_scan() helper that is just a wrapper of nand_scan_with_ids(), passing NULL as the ID table. This way a controller drivers can continue using nand_scan() transparently. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
256c4fc76a | |
Core changes:
* Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices * Move onenand code base to the drivers/mtd/nand/ dir * Rework timing mode selection * Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported * Stop embedding ONFI/JEDEC param page in nand_chip Driver changes: * Rework/cleanup of the mxc driver * Various cleanups in the vf610 driver * Migrate the fsmc and vf610 to ->exec_op() * Get rid of the pxa driver (replaced by marvell_nand) * Support ->setup_data_interface() in the GPMI driver * Fix probe error path in several drivers * Remove support for unused hw_syndrome mode in sunxi_nand * Various minor improvements -----BEGIN PGP SIGNATURE----- iQI5BAABCAAjBQJavURPHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ Ze02AX4ItwDzsw//YqnrDG6JzEBGEEJ0c1I6O/2Zk9eDrXhDeKk2S4G292QGQ4by 8bKYpHo3al9TxTBb/to6+BexoP717tSwbn+AcW5W2YqGpIAeSGaw1POGau9E7l71 wQh1aECOXCpLVLKbv/JFspiKMJYj+irxoTjdR6/3FjawDx0ruLwCCLlvOFlfkUOM ESv+hZv9364jcq/SsydYTYaIc95IsfBOUZVYcXRRdtaI7hvD9ljfXRSGNh+Guovc Bmvyiv9VuUBRg/v26gdQjESVfs3k37YV6LfS5eQSPuCHs2WGaZa5S6mBpHunAxTN bhbd+vVwzMaDSmX29Xsml+isJnmTdBBJRcg4qusY/nBjeUHtY2nj5J3bq+CuhSwj q2MB6YyBStqeagzBvctt3wzG9S7ZsVGU+PMtpMkH4T8BY+Bff9yFCPmRZwTUOorK iVuVhS2NImvJZ05/hc9VchAmSqd4PozHM08oW0NC6FqnF63hinkzw0J3K6FXycFF q/6lioZFHE8qJbD3LhDqCrLJoRDQDpxVQmZP9RCL1iozW7GNIYD7/IrPrsgqSQNa P10PvPt8lbBNq3GU3mIMtajTVihRJmH4Kdxd2i08dRp4hxIakF9Zx3MOhw5gZc0b C0xoFgaEvxbyb5P3VGVy7LYTvTfvJ9KsacntTSn7LrIU3D7meXmwnHynq5A= =uvio -----END PGP SIGNATURE----- Merge tag 'nand/for-4.17' of git://git.infradead.org/linux-mtd into mtd/next Core changes: * Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices * Move onenand code base to the drivers/mtd/nand/ dir * Rework timing mode selection * Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported * Stop embedding ONFI/JEDEC param page in nand_chip Driver changes: * Rework/cleanup of the mxc driver * Various cleanups in the vf610 driver * Migrate the fsmc and vf610 to ->exec_op() * Get rid of the pxa driver (replaced by marvell_nand) * Support ->setup_data_interface() in the GPMI driver * Fix probe error path in several drivers * Remove support for unused hw_syndrome mode in sunxi_nand * Various minor improvements |
a88b5f3833 | |
mtd: rawnand: get rid of the ONFI parameter page in nand_chip
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. Now that there is a small nand_parameters structure that hold all needed ONFI parameters, remove the ONFI page from the nand_chip structure by just allocating it during the identification phase and removing it right after. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
bd0b64340c | |
mtd: rawnand: get rid of the JEDEC parameter page in nand_chip
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. Now that there is a small nand_parameters structure that can held generic parameters, remove the JEDEC page from the nand_chip structure by just allocating it during the identification phase and removing it right after. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
480139d922 | |
mtd: rawnand: allow vendors to declare (un)supported features
If SET/GET_FEATURES is available (from the parameter page), use a bitmap to declare what feature is actually supported. Initialize the bitmap in the core to support timing changes (only feature used by the core), also add support for Micron specific features used in Micron initialization code (in the init routine). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
789157e41a | |
mtd: rawnand: prepare the removal of the ONFI parameter page
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. ONFI-related parameters that will be used outside from the identification function are stored in a separate onfi_parameters structure embedded in nand_parameters, this small structure that already hold generic parameters. For now, the onfi_parameters structure is allocated statically. However, after some deep rework in the NAND framework, it will be possible to do dynamic allocations from the NAND identification phase, and this strcuture will then be dynamically allocated when needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
a97421c753 | |
mtd: rawnand: prepare the removal of ONFI/JEDEC parameter pages
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. To prepare to the removal of such huge structure, a small NAND parameter structure is allocated statically and contains only very few members that are generic to all chips and actually used elsewhere in the code. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
f4531b2b19 | |
mtd: rawnand: avoid setting again the timings to mode 0 after a reset
After a nand_reset_data_interface(), both the NAND chip and the NAND controller use timing mode 0. The previously defined data interface for this chip has been saved and is supposed to be restored after that. However, if the saved data interface also refers to timing mode 0, there is no need to re-apply them again. Also, as nand_setup_data_interface() uses ->set/get_features(), it could lead to issues when doing the reset at probe time as the parameter page is not available yet to know if these functions are supported or not. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
107b7d6a7a | |
mtd: rawnand: check ONFI timings have been acked by the chip
Choosing ONFI timings when ->set/get_features() calls are supported by the NAND chip is a matter of reading the chip's ONFI parameter page and telling the chip the chosen mode (between all of the supported ones) with ->set_feature(). Add a check on whether the chip "acked" the timing mode or not. This can be a problem for NAND chips that do not follow entirely the ONFI specification. These chips actually support other modes than "mode 0", but either: 1/ do not update the timing mode register once a timing mode has been selected. or 2/ do not support the TIMING_MODE featured and thus do not require users to change the timing mode at all. These issues will be addressed in another patch that will add the feature to overwrite NAND chips features within the parameter page, from the NAND chip driver. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
415ae78ffb | |
mtd: rawnand: move calls to ->select_chip() in nand_setup_data_interface()
After a ->set_features(TIMINGS), the chip is supposed to be working at a new speed. In order for all the transactions to be perperly handled, the NAND controller should also be configured to this same speed. Calling ->setup_data_interface() is not enough and the chip should be de-asserted/re-asserted through calls to ->select_chip(). Prepare the next change in nand_setup_data_interface() where timings will be checked after being applied. Because assertions of the CS pin will be needed from within this function, move the calls to ->select_chip() inside nand_setup_data_interface() for later consistency. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
29714d6bd7 | |
mtd: rawnand: handle differently chip/controller errors about timings
Usually, the source of the error when setting/getting features does not matter (if the controller does not support sending the command or if the chip does not support the operation). When it comes to timings, if the controller fails it is an error while if the chip does not support the operation, it can be silently supposed that it already works with the maximum supported timings. Introduce some logic in nand_setup_data_interface() to handle that difference. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
993447b746 | |
mtd: rawnand: use wrappers to call onfi GET/SET_FEATURES
Prepare the fact that some features managed by GET/SET_FEATURES could be overloaded by vendor code. To handle this logic, use new wrappers instead of directly call the ->get/set_features() hooks. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
97baea1e6b | |
mtd: rawnand: rename SET/GET FEATURES related functions
SET/GET FEATURES are flagged ONFI-compliant because of their name. This is not accurate as non-ONFI NAND chips support it and use it. Rename the hooks and helpers to remove the "onfi" prefix. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
b958758e68 | |
mtd: rawnand: rename default ->onfi_get/set_features() implementations
Prepare future work on the ->onfi_get/set_features() hooks by renaming the core's implementation as 'default' ones. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
fc2f30a4b4 | |
mtd: nand: move raw NAND related code to the raw/ subdir
As part of the process of sharing more code between different NAND based devices, we need to move all raw NAND related code to the raw/ subdirectory. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> |
93db446a42 |
Renamed from drivers/mtd/nand/nand_base.c (Browse further)