mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-19 06:08:12 +07:00
| Message | SHA1 | |
|---|---|---|
memory-failure: change type of action_result's param 3 to enum
Change type of action_result's param 3 to enum for type consistency, and rename mf_outcome to mf_result for clearly. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jim Davis <jim.epost@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
cc3e2af42e | |
memory-failure: export page_type and action result
Export 'outcome' and 'action_page_type' to mm.h, so we could use this emnus outside. This patch is preparation for adding trace events for memory-failure recovery action. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Chen Gong <gong.chen@linux.intel.com> Cc: Jim Davis <jim.epost@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
cc637b1704 | |
mm/memory-failure: introduce get_hwpoison_page() for consistent refcount handling
memory_failure() can run in 2 different mode (specified by MF_COUNT_INCREASED) in page refcount perspective. When MF_COUNT_INCREASED is set, memory_failure() assumes that the caller takes a refcount of the target page. And if cleared, memory_failure() takes it in it's own. In current code, however, refcounting is done differently in each caller. For example, madvise_hwpoison() uses get_user_pages_fast() and hwpoison_inject() uses get_page_unless_zero(). So this inconsistent refcounting causes refcount failure especially for thp tail pages. Typical user visible effects are like memory leak or VM_BUG_ON_PAGE(!page_count(page)) in isolate_lru_page(). To fix this refcounting issue, this patch introduces get_hwpoison_page() to handle thp tail pages in the same manner for each caller of hwpoison code. memory_failure() might fail to split thp and in such case it returns without completing page isolation. This is not good because PageHWPoison on the thp is still set and there's no easy way to unpoison such thps. So this patch try to roll back any action to the thp in "non anonymous thp" case and "thp split failed" case, expecting an MCE(SRAR) generated by later access afterward will properly free such thps. [akpm@linux-foundation.org: fix CONFIG_HWPOISON_INJECT=m] Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
ead07f6a86 | |
mm: avoid tail page refcounting on non-THP compound pages
Reintroduce
|
c761471b58 | |
Revert "mm: avoid tail page refcounting on non-THP compound pages"
This reverts commit
|
f3ca10dde4 | |
mm: new pfn_mkwrite same as page_mkwrite for VM_PFNMAP
This will allow FS that uses VM_PFNMAP | VM_MIXEDMAP (no page structs) to
get notified when access is a write to a read-only PFN.
This can happen if we mmap() a file then first mmap-read from it to
page-in a read-only PFN, than we mmap-write to the same page.
We need this functionality to fix a DAX bug, where in the scenario above
we fail to set ctime/mtime though we modified the file. An xfstest is
attached to this patchset that shows the failure and the fix. (A DAX
patch will follow)
This functionality is extra important for us, because upon dirtying of a
pmem page we also want to RDMA the page to a remote cluster node.
We define a new pfn_mkwrite and do not reuse page_mkwrite because
1 - The name ;-)
2 - But mainly because it would take a very long and tedious
audit of all page_mkwrite functions of VM_MIXEDMAP/VM_PFNMAP
users. To make sure they do not now CRASH. For example current
DAX code (which this is for) would crash.
If we would want to reuse page_mkwrite, We will need to first
patch all users, so to not-crash-on-no-page. Then enable this
patch. But even if I did that I would not sleep so well at night.
Adding a new vector is the safest thing to do, and is not that
expensive. an extra pointer at a static function vector per driver.
Also the new vector is better for performance, because else we
Will call all current Kernel vectors, so to:
check-ha-no-page-do-nothing and return.
No need to call it from do_shared_fault because do_wp_page is called to
change pte permissions anyway.
Signed-off-by: Yigal Korman <yigal@plexistor.com>
Signed-off-by: Boaz Harrosh <boaz@plexistor.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
dd9061846a | |
mm: uninline and cleanup page-mapping related helpers
Most-used page->mapping helper -- page_mapping() -- has already uninlined.
Let's uninline also page_rmapping() and page_anon_vma(). It saves us
depending on configuration around 400 bytes in text:
text data bss dec hex filename
660318 99254 410000
|
e39155ea11 | |
include/linux/mm.h: simplify flag check
Flip the flag test so that it is the simplest. No functional change, just a small readability improvement: No code changed: # arch/x86/kernel/sys_x86_64.o: text data bss dec hex filename 1551 24 0 1575 627 sys_x86_64.o.before 1551 24 0 1575 627 sys_x86_64.o.after md5: 70708d1b1ad35cc891118a69dc1a63f9 sys_x86_64.o.before.asm 70708d1b1ad35cc891118a69dc1a63f9 sys_x86_64.o.after.asm Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
cdd7875e0c | |
mm: avoid tail page refcounting on non-THP compound pages
THP uses tail page refcounting to be able to split huge pages at any time. Tail page refcounting is not needed for other users of compound pages and it's harmful because of overhead. We try to exclude non-THP pages from tail page refcounting using __compound_tail_refcounted() check. It excludes most common non-THP compound pages: SL*B and hugetlb, but it doesn't catch rest of __GFP_COMP users -- drivers. And it's not only about overhead. Drivers might want to use compound pages to get refcounting semantics suitable for mapping high-order pages to userspace. But tail page refcounting breaks it. Tail page refcounting uses ->_mapcount in tail pages to store GUP pins on them. It means GUP pins would affect page_mapcount() for tail pages. It's not a problem for THP, because it never maps tail pages. But unlike THP, drivers map parts of compound pages with PTEs and it makes page_mapcount() be called for tail pages. In particular, GUP pins would shift PSS up and affect /proc/kpagecount for such pages. But, I'm not aware about anything which can lead to crash or other serious misbehaviour. Since currently all THP pages are anonymous and all drivers pages are not, we can fix the __compound_tail_refcounted() check by requiring PageAnon() to enable tail page refcounting. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
8d63d99a5d | |
mm: consolidate all page-flags helpers in <linux/page-flags.h>
Currently we take a naive approach to page flags on compound pages - we set the flag on the page without consideration if the flag makes sense for tail page or for compound page in general. This patchset try to sort this out by defining per-flag policy on what need to be done if page-flag helper operate on compound page. The last patch in the patchset also sanitizes usege of page->mapping for tail pages. We don't define the meaning of page->mapping for tail pages. Currently it's always NULL, which can be inconsistent with head page and potentially lead to problems. For now I caught one case of illegal usage of page flags or ->mapping: sound subsystem allocates pages with __GFP_COMP and maps them with PTEs. It leads to setting dirty bit on tail pages and access to tail_page's ->mapping. I don't see any bad behaviour caused by this, but worth fixing anyway. This patchset makes more sense if you take my THP refcounting into account: we will see more compound pages mapped with PTEs and we need to define behaviour of flags on compound pages to avoid bugs. This patch (of 16): We have page-flags helper function declarations/definitions spread over several header files. Let's consolidate them in <linux/page-flags.h>. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Steve Capper <steve.capper@linaro.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
e8c6158fef | |
mm: completely remove dumping per-cpu lists from show_mem()
It seems nobody needs this. Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
761b06771a | |
mm: hide per-cpu lists in output of show_mem()
This makes show_mem() much less verbose on huge machines. Instead of huge and almost useless dump of counters for each per-zone per-cpu lists this patch prints the sum of these counters for each zone (free_pcp) and size of per-cpu list for current cpu (local_pcp). The filter flag SHOW_MEM_PERCPU_LISTS reverts to the old verbose mode. [akpm@linux-foundation.org: update show_free_areas comment] Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
d1bfcdb8ce | |
page_writeback: clean up mess around cancel_dirty_page()
This patch replaces cancel_dirty_page() with a helper function account_page_cleaned() which only updates counters. It's called from truncate_complete_page() and from try_to_free_buffers() (hack for ext3). Page is locked in both cases, page-lock protects against concurrent dirtiers: see commit |
b9ea25152e | |
mm: rename FOLL_MLOCK to FOLL_POPULATE
After commit
|
84d33df279 | |
mm: allow page fault handlers to perform the COW
Currently COW of an XIP file is done by first bringing in a read-only mapping, then retrying the fault and copying the page. It is much more efficient to tell the fault handler that a COW is being attempted (by passing in the pre-allocated page in the vm_fault structure), and allow the handler to perform the COW operation itself. The handler cannot insert the page itself if there is already a read-only mapping at that address, so allow the handler to return VM_FAULT_LOCKED and set the fault_page to be NULL. This indicates to the MM code that the i_mmap_lock is held instead of the page lock. Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
2e4cdab058 | |
fs/proc/task_mmu.c: add user-space support for resetting mm->hiwater_rss (peak RSS)
Peak resident size of a process can be reset back to the process's current rss value by writing "5" to /proc/pid/clear_refs. The driving use-case for this would be getting the peak RSS value, which can be retrieved from the VmHWM field in /proc/pid/status, per benchmark iteration or test scenario. [akpm@linux-foundation.org: clarify behaviour in documentation] Signed-off-by: Petr Cermak <petrcermak@chromium.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Primiano Tucci <primiano@chromium.org> Cc: Petr Cermak <petrcermak@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
695f055936 | |
mm: do not use mm->nr_pmds on !MMU configurations
mm->nr_pmds doesn't make sense on !MMU configurations Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
2d2f5119b8 | |
vmscan: per memory cgroup slab shrinkers
This patch adds SHRINKER_MEMCG_AWARE flag. If a shrinker has this flag set, it will be called per memory cgroup. The memory cgroup to scan objects from is passed in shrink_control->memcg. If the memory cgroup is NULL, a memcg aware shrinker is supposed to scan objects from the global list. Unaware shrinkers are only called on global pressure with memcg=NULL. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
cb731d6c62 | |
pagewalk: add walk_page_vma()
Introduce walk_page_vma(), which is useful for the callers which want to walk over a given vma. It's used by later patches. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
900fc5f197 | |
pagewalk: improve vma handling
Current implementation of page table walker has a fundamental problem in vma handling, which started when we tried to handle vma(VM_HUGETLB). Because it's done in pgd loop, considering vma boundary makes code complicated and bug-prone. From the users viewpoint, some user checks some vma-related condition to determine whether the user really does page walk over the vma. In order to solve these, this patch moves vma check outside pgd loop and introduce a new callback ->test_walk(). Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
fafaa4264e | |
mm/pagewalk: remove pgd_entry() and pud_entry()
Currently no user of page table walker sets ->pgd_entry() or ->pud_entry(), so checking their existence in each loop is just wasting CPU cycle. So let's remove it to reduce overhead. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
0b1fbfe500 | |
mm: gup: add __get_user_pages_unlocked to customize gup_flags
Some callers (like KVM) may want to set the gup_flags like FOLL_HWPOSION to get a proper -EHWPOSION retval instead of -EFAULT to take a more appropriate action if get_user_pages runs into a memory failure. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Peter Feiner <pfeiner@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
0fd71a56f4 | |
mm: gup: add get_user_pages_locked and get_user_pages_unlocked
FAULT_FOLL_ALLOW_RETRY allows the page fault to drop the mmap_sem for reading to reduce the mmap_sem contention (for writing), like while waiting for I/O completion. The problem is that right now practically no get_user_pages call uses FAULT_FOLL_ALLOW_RETRY, so we're not leveraging that nifty feature. Andres fixed it for the KVM page fault. However get_user_pages_fast remains uncovered, and 99% of other get_user_pages aren't using it either (the only exception being FOLL_NOWAIT in KVM which is really nonblocking and in fact it doesn't even release the mmap_sem). So this patchsets extends the optimization Andres did in the KVM page fault to the whole kernel. It makes most important places (including gup_fast) to use FAULT_FOLL_ALLOW_RETRY to reduce the mmap_sem hold times during I/O. The only few places that remains uncovered are drivers like v4l and other exceptions that tends to work on their own memory and they're not working on random user memory (for example like O_DIRECT that uses gup_fast and is fully covered by this patch). A follow up patch should probably also add a printk_once warning to get_user_pages that should go obsolete and be phased out eventually. The "vmas" parameter of get_user_pages makes it fundamentally incompatible with FAULT_FOLL_ALLOW_RETRY (vmas array becomes meaningless the moment the mmap_sem is released). While this is just an optimization, this becomes an absolute requirement for the userfaultfd feature http://lwn.net/Articles/615086/ . The userfaultfd allows to block the page fault, and in order to do so I need to drop the mmap_sem first. So this patch also ensures that all memory where userfaultfd could be registered by KVM, the very first fault (no matter if it is a regular page fault, or a get_user_pages) always has FAULT_FOLL_ALLOW_RETRY set. Then the userfaultfd blocks and it is waken only when the pagetable is already mapped. The second fault attempt after the wakeup doesn't need FAULT_FOLL_ALLOW_RETRY, so it's ok to retry without it. This patch (of 5): We can leverage the VM_FAULT_RETRY functionality in the page fault paths better by using either get_user_pages_locked or get_user_pages_unlocked. The former allows conversion of get_user_pages invocations that will have to pass a "&locked" parameter to know if the mmap_sem was dropped during the call. Example from: down_read(&mm->mmap_sem); do_something() get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); to: int locked = 1; down_read(&mm->mmap_sem); do_something() get_user_pages_locked(tsk, mm, ..., pages, &locked); if (locked) up_read(&mm->mmap_sem); The latter is suitable only as a drop in replacement of the form: down_read(&mm->mmap_sem); get_user_pages(tsk, mm, ..., pages, NULL); up_read(&mm->mmap_sem); into: get_user_pages_unlocked(tsk, mm, ..., pages); Where tsk, mm, the intermediate "..." paramters and "pages" can be any value as before. Just the last parameter of get_user_pages (vmas) must be NULL for get_user_pages_locked|unlocked to be usable (the latter original form wouldn't have been safe anyway if vmas wasn't null, for the former we just make it explicit by dropping the parameter). If vmas is not NULL these two methods cannot be used. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Andres Lagar-Cavilla <andreslc@google.com> Reviewed-by: Peter Feiner <pfeiner@google.com> Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
f0818f472d | |
mm: account pmd page tables to the process
Dave noticed that unprivileged process can allocate significant amount of
memory -- >500 MiB on x86_64 -- and stay unnoticed by oom-killer and
memory cgroup. The trick is to allocate a lot of PMD page tables. Linux
kernel doesn't account PMD tables to the process, only PTE.
The use-cases below use few tricks to allocate a lot of PMD page tables
while keeping VmRSS and VmPTE low. oom_score for the process will be 0.
#include <errno.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/prctl.h>
#define PUD_SIZE (1UL << 30)
#define PMD_SIZE (1UL << 21)
#define NR_PUD 130000
int main(void)
{
char *addr = NULL;
unsigned long i;
prctl(PR_SET_THP_DISABLE);
for (i = 0; i < NR_PUD ; i++) {
addr = mmap(addr + PUD_SIZE, PUD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (addr == MAP_FAILED) {
perror("mmap");
break;
}
*addr = 'x';
munmap(addr, PMD_SIZE);
mmap(addr, PMD_SIZE, PROT_WRITE|PROT_READ,
MAP_ANONYMOUS|MAP_PRIVATE|MAP_FIXED, -1, 0);
if (addr == MAP_FAILED)
perror("re-mmap"), exit(1);
}
printf("PID %d consumed %lu KiB in PMD page tables\n",
getpid(), i * 4096 >> 10);
return pause();
}
The patch addresses the issue by account PMD tables to the process the
same way we account PTE.
The main place where PMD tables is accounted is __pmd_alloc() and
free_pmd_range(). But there're few corner cases:
- HugeTLB can share PMD page tables. The patch handles by accounting
the table to all processes who share it.
- x86 PAE pre-allocates few PMD tables on fork.
- Architectures with FIRST_USER_ADDRESS > 0. We need to adjust sanity
check on exit(2).
Accounting only happens on configuration where PMD page table's level is
present (PMD is not folded). As with nr_ptes we use per-mm counter. The
counter value is used to calculate baseline for badness score by
oom-killer.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: David Rientjes <rientjes@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
dc6c9a35b6 | |
mm: add VM_BUG_ON_PAGE() to page_mapcount()
Add VM_BUG_ON_PAGE() for slab pages. _mapcount is an union with slab struct in struct page, so we must avoid accessing _mapcount if this page is a slab page. Also remove the unneeded bracket. Signed-off-by: Yalin Wang <yalin.wang@sonymobile.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
1d148e218a | |
mm: add fields for compound destructor and order into struct page
Currently, we use lru.next/lru.prev plus cast to access or set destructor and order of compound page. Let's replace it with explicit fields in struct page. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
e4b294c2d8 | |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton:
"Bite-sized chunks this time, to avoid the MTA ratelimiting woes.
- fs/notify updates
- ocfs2
- some of MM"
That laconic "some MM" is mainly the removal of remap_file_pages(),
which is a big simplification of the VM, and which gets rid of a *lot*
of random cruft and special cases because we no longer support the
non-linear mappings that it used.
From a user interface perspective, nothing has changed, because the
remap_file_pages() syscall still exists, it's just done by emulating the
old behavior by creating a lot of individual small mappings instead of
one non-linear one.
The emulation is slower than the old "native" non-linear mappings, but
nobody really uses or cares about remap_file_pages(), and simplifying
the VM is a big advantage.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (78 commits)
memcg: zap memcg_slab_caches and memcg_slab_mutex
memcg: zap memcg_name argument of memcg_create_kmem_cache
memcg: zap __memcg_{charge,uncharge}_slab
mm/page_alloc.c: place zone_id check before VM_BUG_ON_PAGE check
mm: hugetlb: fix type of hugetlb_treat_as_movable variable
mm, hugetlb: remove unnecessary lower bound on sysctl handlers"?
mm: memory: merge shared-writable dirtying branches in do_wp_page()
mm: memory: remove ->vm_file check on shared writable vmas
xtensa: drop _PAGE_FILE and pte_file()-related helpers
x86: drop _PAGE_FILE and pte_file()-related helpers
unicore32: drop pte_file()-related helpers
um: drop _PAGE_FILE and pte_file()-related helpers
tile: drop pte_file()-related helpers
sparc: drop pte_file()-related helpers
sh: drop _PAGE_FILE and pte_file()-related helpers
score: drop _PAGE_FILE and pte_file()-related helpers
s390: drop pte_file()-related helpers
parisc: drop _PAGE_FILE and pte_file()-related helpers
openrisc: drop _PAGE_FILE and pte_file()-related helpers
nios2: drop _PAGE_FILE and pte_file()-related helpers
...
|
992de5a8ec | |
mm: remove rest usage of VM_NONLINEAR and pte_file()
One bit in ->vm_flags is unused now! Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
0661a33611 | |
rmap: drop support of non-linear mappings
We don't create non-linear mappings anymore. Let's drop code which handles them in rmap. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
27ba0644ea | |
mm: drop vm_ops->remap_pages and generic_file_remap_pages() stub
Nobody uses it anymore. [akpm@linux-foundation.org: fix filemap_xip.c] Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
d83a08db5b | |
mm: drop support of non-linear mapping from fault codepath
We don't create non-linear mappings anymore. Let's drop code which handles them on page fault. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
9b4bdd2ffa | |
mm: drop support of non-linear mapping from unmap/zap codepath
We have remap_file_pages(2) emulation in -mm tree for few release cycles and we plan to have it mainline in v3.20. This patchset removes rest of VM_NONLINEAR infrastructure. Patches 1-8 take care about generic code. They are pretty straight-forward and can be applied without other of patches. Rest patches removes pte_file()-related stuff from architecture-specific code. It usually frees up one bit in non-present pte. I've tried to reuse that bit for swap offset, where I was able to figure out how to do that. For obvious reason I cannot test all that arch-specific code and would like to see acks from maintainers. In total, remap_file_pages(2) required about 1.4K lines of not-so-trivial kernel code. That's too much for functionality nobody uses. Tested-by: Felipe Balbi <balbi@ti.com> This patch (of 38): We don't create non-linear mappings anymore. Let's drop code which handles them on unmap/zap. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
8a5f14a231 | |
mm: don't use compound_head() in virt_to_head_page()
compound_head() is implemented with assumption that there would be race condition when checking tail flag. This assumption is only true when we try to access arbitrary positioned struct page. The situation that virt_to_head_page() is called is different case. We call virt_to_head_page() only in the range of allocated pages, so there is no race condition on tail flag. In this case, we don't need to handle race condition and we can reduce overhead slightly. This patch implements compound_head_fast() which is similar with compound_head() except tail flag race handling. And then, virt_to_head_page() uses this optimized function to improve performance. I saw 1.8% win in a fast-path loop over kmem_cache_alloc/free, (14.063 ns -> 13.810 ns) if target object is on tail page. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
ccaafd7fd0 | |
xen: features and fixes for 3.20-rc0
- Reworked handling for foreign (grant mapped) pages to simplify the code, enable a number of additional use cases and fix a number of long-standing bugs. - Prefer the TSC over the Xen PV clock when dom0 (and the TSC is stable). - Assorted other cleanup and minor bug fixes. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQEcBAABAgAGBQJU2JC+AAoJEFxbo/MsZsTRIvAH/1lgQ0EQlxaZtEFWY8cJBzxY dXaTMfyGQOddGYDCW0r42hhXJHeX7DWXSERSD3aW9DZOn/eYdneHq9gWRD4uPrGn hEFQ26J4jZWR5riGXaja0LqI2gJKLZ6BhHIQciLEbY+jw4ynkNBLNRPFehuwrCsZ WdBwJkyvXC3RErekncRl/aNhxdi4p1P6qeiaW/mo3UcSO/CFSKybOLwT65iePazg XuY9UiTn2+qcRkm/tjx8K9heHK8SBEGNWuoTcWYF1to8mwwUfKIAc4NO2UBDXJI+ rp7Z2lVFdII15JsQ08ATh3t7xDrMWLzCX/y4jCzmF3DBXLbSWdHCQMgI7TWt5pE= =PyJK -----END PGP SIGNATURE----- Merge tag 'stable/for-linus-3.20-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen features and fixes from David Vrabel: - Reworked handling for foreign (grant mapped) pages to simplify the code, enable a number of additional use cases and fix a number of long-standing bugs. - Prefer the TSC over the Xen PV clock when dom0 (and the TSC is stable). - Assorted other cleanup and minor bug fixes. * tag 'stable/for-linus-3.20-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (25 commits) xen/manage: Fix USB interaction issues when resuming xenbus: Add proper handling of XS_ERROR from Xenbus for transactions. xen/gntdev: provide find_special_page VMA operation xen/gntdev: mark userspace PTEs as special on x86 PV guests xen-blkback: safely unmap grants in case they are still in use xen/gntdev: safely unmap grants in case they are still in use xen/gntdev: convert priv->lock to a mutex xen/grant-table: add a mechanism to safely unmap pages that are in use xen-netback: use foreign page information from the pages themselves xen: mark grant mapped pages as foreign xen/grant-table: add helpers for allocating pages x86/xen: require ballooned pages for grant maps xen: remove scratch frames for ballooned pages and m2p override xen/grant-table: pre-populate kernel unmap ops for xen_gnttab_unmap_refs() mm: add 'foreign' alias for the 'pinned' page flag mm: provide a find_special_page vma operation x86/xen: cleanup arch/x86/xen/mmu.c x86/xen: add some __init annotations in arch/x86/xen/mmu.c x86/xen: add some __init and static annotations in arch/x86/xen/setup.c x86/xen: use correct types for addresses in arch/x86/xen/setup.c ... |
bdccc4edeb | |
vm: add VM_FAULT_SIGSEGV handling support
The core VM already knows about VM_FAULT_SIGBUS, but cannot return a
"you should SIGSEGV" error, because the SIGSEGV case was generally
handled by the caller - usually the architecture fault handler.
That results in lots of duplication - all the architecture fault
handlers end up doing very similar "look up vma, check permissions, do
retries etc" - but it generally works. However, there are cases where
the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV.
In particular, when accessing the stack guard page, libsigsegv expects a
SIGSEGV. And it usually got one, because the stack growth is handled by
that duplicated architecture fault handler.
However, when the generic VM layer started propagating the error return
from the stack expansion in commit
|
33692f2759 | |
mm: provide a find_special_page vma operation
The optional find_special_page VMA operation is used to lookup the pages backing a VMA. This is useful in cases where the normal mechanisms for finding the page don't work. This is only called if the PTE is special. One use case is a Xen PV guest mapping foreign pages into userspace. In a Xen PV guest, the PTEs contain MFNs so get_user_pages() (for example) must do an MFN to PFN (M2P) lookup before it can get the page. For foreign pages (those owned by another guest) the M2P lookup returns the PFN as seen by the foreign guest (which would be completely the wrong page for the local guest). This cannot be fixed up improving the M2P lookup since one MFN may be mapped onto two or more pages so getting the right page is impossible given just the MFN. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> |
667a0a06c9 | |
mm: propagate error from stack expansion even for guard page
Jay Foad reports that the address sanitizer test (asan) sometimes gets
confused by a stack pointer that ends up being outside the stack vma
that is reported by /proc/maps.
This happens due to an interaction between RLIMIT_STACK and the guard
page: when we do the guard page check, we ignore the potential error
from the stack expansion, which effectively results in a missing guard
page, since the expected stack expansion won't have been done.
And since /proc/maps explicitly ignores the guard page (commit
|
fee7e49d45 | |
vm_area_operations: kill ->migrate()
the only instance this method has ever grown was one in kernfs - one that call ->migrate() of another vm_ops if it exists. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
50062175ff | |
mm: vmscan: invoke slab shrinkers from shrink_zone()
The slab shrinkers are currently invoked from the zonelist walkers in kswapd, direct reclaim, and zone reclaim, all of which roughly gauge the eligible LRU pages and assemble a nodemask to pass to NUMA-aware shrinkers, which then again have to walk over the nodemask. This is redundant code, extra runtime work, and fairly inaccurate when it comes to the estimation of actually scannable LRU pages. The code duplication will only get worse when making the shrinkers cgroup-aware and requiring them to have out-of-band cgroup hierarchy walks as well. Instead, invoke the shrinkers from shrink_zone(), which is where all reclaimers end up, to avoid this duplication. Take the count for eligible LRU pages out of get_scan_count(), which considers many more factors than just the availability of swap space, like zone_reclaimable_pages() currently does. Accumulate the number over all visited lruvecs to get the per-zone value. Some nodes have multiple zones due to memory addressing restrictions. To avoid putting too much pressure on the shrinkers, only invoke them once for each such node, using the class zone of the allocation as the pivot zone. For now, this integrates the slab shrinking better into the reclaim logic and gets rid of duplicative invocations from kswapd, direct reclaim, and zone reclaim. It also prepares for cgroup-awareness, allowing memcg-capable shrinkers to be added at the lruvec level without much duplication of both code and runtime work. This changes kswapd behavior, which used to invoke the shrinkers for each zone, but with scan ratios gathered from the entire node, resulting in meaningless pressure quantities on multi-zone nodes. Zone reclaim behavior also changes. It used to shrink slabs until the same amount of pages were shrunk as were reclaimed from the LRUs. Now it merely invokes the shrinkers once with the zone's scan ratio, which makes the shrinkers go easier on caches that implement aging and would prefer feeding back pressure from recently used slab objects to unused LRU pages. [vdavydov@parallels.com: assure class zone is populated] Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
6b4f7799c6 | |
mm/debug-pagealloc: make debug-pagealloc boottime configurable
Now, we have prepared to avoid using debug-pagealloc in boottime. So introduce new kernel-parameter to disable debug-pagealloc in boottime, and makes related functions to be disabled in this case. Only non-intuitive part is change of guard page functions. Because guard page is effective only if debug-pagealloc is enabled, turning off according to debug-pagealloc is reasonable thing to do. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
031bc5743f | |
mm/debug-pagealloc: prepare boottime configurable on/off
Until now, debug-pagealloc needs extra flags in struct page, so we need to recompile whole source code when we decide to use it. This is really painful, because it takes some time to recompile and sometimes rebuild is not possible due to third party module depending on struct page. So, we can't use this good feature in many cases. Now, we have the page extension feature that allows us to insert extra flags to outside of struct page. This gets rid of third party module issue mentioned above. And, this allows us to determine if we need extra memory for this page extension in boottime. With these property, we can avoid using debug-pagealloc in boottime with low computational overhead in the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our development process greatly. This patch is the preparation step to achive above goal. debug-pagealloc originally uses extra field of struct page, but, after this patch, it will use field of struct page_ext. Because memory for page_ext is allocated later than initialization of page allocator in CONFIG_SPARSEMEM, we should disable debug-pagealloc feature temporarily until initialization of page_ext. This patch implements this. Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
e30825f186 | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky: "The most notable change for this pull request is the ftrace rework from Heiko. It brings a small performance improvement and the ground work to support a new gcc option to replace the mcount blocks with a single nop. Two new s390 specific system calls are added to emulate user space mmio for PCI, an artifact of the how PCI memory is accessed. Two patches for the memory management with changes to common code. For KVM mm_forbids_zeropage is added which disables the empty zero page for an mm that is used by a KVM process. And an optimization, pmdp_get_and_clear_full is added analog to ptep_get_and_clear_full. Some micro optimization for the cmpxchg and the spinlock code. And as usual bug fixes and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (46 commits) s390/cputime: fix 31-bit compile s390/scm_block: make the number of reqs per HW req configurable s390/scm_block: handle multiple requests in one HW request s390/scm_block: allocate aidaw pages only when necessary s390/scm_block: use mempool to manage aidaw requests s390/eadm: change timeout value s390/mm: fix memory leak of ptlock in pmd_free_tlb s390: use local symbol names in entry[64].S s390/ptrace: always include vector registers in core files s390/simd: clear vector register pointer on fork/clone s390: translate cputime magic constants to macros s390/idle: convert open coded idle time seqcount s390/idle: add missing irq off lockdep annotation s390/debug: avoid function call for debug_sprintf_* s390/kprobes: fix instruction copy for out of line execution s390: remove diag 44 calls from cpu_relax() s390/dasd: retry partition detection s390/dasd: fix list corruption for sleep_on requests s390/dasd: fix infinite term I/O loop s390/dasd: remove unused code ... |
27afc5dbda | |
x86, mpx: Introduce VM_MPX to indicate that a VMA is MPX specific
MPX-enabled applications using large swaths of memory can potentially have large numbers of bounds tables in process address space to save bounds information. These tables can take up huge swaths of memory (as much as 80% of the memory on the system) even if we clean them up aggressively. In the worst-case scenario, the tables can be 4x the size of the data structure being tracked. IOW, a 1-page structure can require 4 bounds-table pages. Being this huge, our expectation is that folks using MPX are going to be keen on figuring out how much memory is being dedicated to it. So we need a way to track memory use for MPX. If we want to specifically track MPX VMAs we need to be able to distinguish them from normal VMAs, and keep them from getting merged with normal VMAs. A new VM_ flag set only on MPX VMAs does both of those things. With this flag, MPX bounds-table VMAs can be distinguished from other VMAs, and userspace can also walk /proc/$pid/smaps to get memory usage for MPX. In addition to this flag, we also introduce a special ->vm_ops specific to MPX VMAs (see the patch "add MPX specific mmap interface"), but currently different ->vm_ops do not by themselves prevent VMA merging, so we still need this flag. We understand that VM_ flags are scarce and are open to other options. Signed-off-by: Qiaowei Ren <qiaowei.ren@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20141114151825.565625B3@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
4aae7e436f | |
mm: page-writeback: inline account_page_dirtied() into single caller
A follow-up patch would have changed the call signature. To save the trouble, just fold it instead. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: <stable@vger.kernel.org> [3.17.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
3a3c02ecf7 | |
mm: introduce mm_forbids_zeropage function
Add a new function stub to allow architectures to disable for an mm_structthe backing of non-present, anonymous pages with read-only empty zero pages. Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> |
593befa6ab | |
A large number of cleanups and bug fixes, with some (minor) journal
optimizations. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABCAAGBQJUPlLCAAoJENNvdpvBGATwpN8P/jnbDL1RqM9ZEAWfbDhvYumR Fi59b3IDzSJHuuJeP0nTblVbbWclpO9ljCd18ttsHr8gBXA0ViaEU0XvWbpHIwPN 1fr1/Ovd0wvBdIVdLlaLXTR9skH4lbkiXxv/tkfjVCOSpzqiKID98Z72e/gUjB7Z 8xjAn/mTCnXKnhqMGzi8RC2MP1wgY//ErR21bj6so/8RC8zu4P6JuVj/hI6s0y5i IPtAmjhdM7nxnS0wJwj7dLT0yNDftDh69qE6CgIwyK+Xn/SZFgYwE6+l02dj3DET ZcAzTT9ToTMJdWtMu+5Y4LY8ObJ5xqMPbMoUclQ3DWe6nZicvtcBVCjfG/J8pFlY IFD0nfh/OpX9cQMwJ+5Y8P4TrMiqM+FfuLfu+X83gLyrAyIazwoaZls2lxlEyC0w M25oAqeKGUeVakVlmDZlVyBf05cu5m62x1rRvpcwMXMNhJl8/xwsSdhdYGeJfbO0 0MfL1n6GmvHvouMXKNsXlat/w3QVaQWVRzqdF9x7Q730fSHC/zxVGO+Po3jz2fBd fBdfE14BIIU7nkyBVy0CZG5SDmQW4YACocOv/ATmII9j76F9eZQ3zsA8J1x+dLmJ dP1Uxvsn1C3HW8Ua239j0XUJncglb06iEId0ywdkmWcc1rbzsyZ/NzXN/QBdZmqB 9g4GKAXAyh15PeBTJ5K/ =vWic -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "A large number of cleanups and bug fixes, with some (minor) journal optimizations" [ This got sent to me before -rc1, but was stuck in my spam folder. - Linus ] * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (67 commits) ext4: check s_chksum_driver when looking for bg csum presence ext4: move error report out of atomic context in ext4_init_block_bitmap() ext4: Replace open coded mdata csum feature to helper function ext4: delete useless comments about ext4_move_extents ext4: fix reservation overflow in ext4_da_write_begin ext4: add ext4_iget_normal() which is to be used for dir tree lookups ext4: don't orphan or truncate the boot loader inode ext4: grab missed write_count for EXT4_IOC_SWAP_BOOT ext4: optimize block allocation on grow indepth ext4: get rid of code duplication ext4: fix over-defensive complaint after journal abort ext4: fix return value of ext4_do_update_inode ext4: fix mmap data corruption when blocksize < pagesize vfs: fix data corruption when blocksize < pagesize for mmaped data ext4: fold ext4_nojournal_sops into ext4_sops ext4: support freezing ext2 (nojournal) file systems ext4: fold ext4_sync_fs_nojournal() into ext4_sync_fs() ext4: don't check quota format when there are no quota files jbd2: simplify calling convention around __jbd2_journal_clean_checkpoint_list jbd2: avoid pointless scanning of checkpoint lists ... |
c2661b8060 | |
mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared
For VMAs that don't want write notifications, PTEs created for read faults
have their write bit set. If the read fault happens after VM_SOFTDIRTY is
cleared, then the PTE's softdirty bit will remain clear after subsequent
writes.
Here's a simple code snippet to demonstrate the bug:
char* m = mmap(NULL, getpagesize(), PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
system("echo 4 > /proc/$PPID/clear_refs"); /* clear VM_SOFTDIRTY */
assert(*m == '\0'); /* new PTE allows write access */
assert(!soft_dirty(x));
*m = 'x'; /* should dirty the page */
assert(soft_dirty(x)); /* fails */
With this patch, write notifications are enabled when VM_SOFTDIRTY is
cleared. Furthermore, to avoid unnecessary faults, write notifications
are disabled when VM_SOFTDIRTY is set.
As a side effect of enabling and disabling write notifications with
care, this patch fixes a bug in mprotect where vm_page_prot bits set by
drivers were zapped on mprotect. An analogous bug was fixed in mmap by
commit
|
64e455079e | |
x86: optimize resource lookups for ioremap
We have a large university system in the UK that is experiencing very long delays modprobing the driver for a specific I/O device. The delay is from 8-10 minutes per device and there are 31 devices in the system. This 4 to 5 hour delay in starting up those I/O devices is very much a burden on the customer. There are two causes for requiring a restart/reload of the drivers. First is periodic preventive maintenance (PM) and the second is if any of the devices experience a fatal error. Both of these trigger this excessively long delay in bringing the system back up to full capability. The problem was tracked down to a very slow IOREMAP operation and the excessively long ioresource lookup to insure that the user is not attempting to ioremap RAM. These patches provide a speed up to that function. The modprobe time appears to be affected quite a bit by previous activity on the ioresource list, which I suspect is due to cache preloading. While the overall improvement is impacted by other overhead of starting the devices, this drastically improves the modprobe time. Also our system is considerably smaller so the percentages gained will not be the same. Best case improvement with the modprobe on our 20 device smallish system was from 'real 5m51.913s' to 'real 0m18.275s'. This patch (of 2): Since the ioremap operation is verifying that the specified address range is NOT RAM, it will search the entire ioresource list if the condition is true. To make matters worse, it does this one 4k page at a time. For a 128M BAR region this is 32 passes to determine the entire region does not contain any RAM addresses. This patch provides another resource lookup function, region_is_ram, that searches for the entire region specified, verifying that it is completely contained within the resource region. If it is found, then it is checked to be RAM or not, within a single pass. The return result reflects if it was found or not (-1), and whether it is RAM (1) or not (0). This allows the caller to fallback to the previous page by page search if it was not found. [akpm@linux-foundation.org: fix spellos and typos in comment] Signed-off-by: Mike Travis <travis@sgi.com> Acked-by: Alex Thorlton <athorlton@sgi.com> Reviewed-by: Cliff Wickman <cpw@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Mark Salter <msalter@redhat.com> Cc: Dave Young <dyoung@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
67cf13ceed | |
mm/balloon_compaction: redesign ballooned pages management
Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
d6d86c0a7f | |
mm: introduce check_data_rlimit helper
To eliminate code duplication lets introduce check_data_rlimit helper which we will use in brk() and prctl() syscalls. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Kees Cook <keescook@chromium.org> Cc: Tejun Heo <tj@kernel.org> Cc: Andrew Vagin <avagin@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Julien Tinnes <jln@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
9c5990240e |