mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-11-19 16:18:04 +07:00
| Message | SHA1 | |
|---|---|---|
x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat
LAPIC related statistics are grouped inside the per-cpu structure irq_stat, so there is no need for icr_read_retry_count to be a standalone per-cpu variable. This patch moves icr_read_retry_count to where it belongs. Suggested-y: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: Jörn Engel <joern@logfs.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> |
b49d7d877f | |
x86: Add per-cpu stat counter for APIC ICR read tries
In the IPI delivery slow path (NMI delivery) we retry the ICR read to check for delivery completion a limited number of times. [ The reason for the limited retries is that some of the places where it is used (cpu boot, kdump, etc) IPI delivery might not succeed (due to a firmware bug or system crash, for example) and in such a case it is better to give up and resume execution of other code. ] This patch adds a new entry to /proc/interrupts, RTR, which tells user space the number of times we retried the ICR read in the IPI delivery slow path. This should give some insight into how well the APIC message delivery hardware is working - if the counts are way too large then we are hitting a (very-) slow path way too often. Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Cc: Jörn Engel <joern@logfs.org> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/n/tip-vzsp20lo2xdzh5f70g0eis2s@git.kernel.org [ extended the changelog ] Signed-off-by: Ingo Molnar <mingo@elte.hu> |
346b46be5f | |
x86: Add NumaChip support
Adds support for Numascale NumaChip large-SMP systems. It is needed to enable the booting of more than ~168 cores. v2: - [Steffen] enumerate only accessible northbridges - [Daniel] rediffed and validated against 3.1-rc10 v3: - [Daniel] use x86_init core numbering override - [Daniel] cleanups as per feedback v4: - [Daniel] use updated x86_cpuinit override v5: - drop disabling interrupts locally, as ISR write is atomic; drop delay - added read-mostly annotations where appropriate - require CONFIG_SMP, so drop conditional path Workload tested on 96 cores/16 sockets. Signed-off-by: Steffen Persvold <sp@numascale.com> Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Link: http://lkml.kernel.org/r/1323101246-2400-1-git-send-email-daniel@numascale-asia.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
44b111b519 | |
x86: Make flat_init_apic_ldr() available
Allow flat_init_apic_ldr() to be used outside the compilation unit for similar APIC implementations. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Cc: Steffen Persvold <sp@numascale.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Link: http://lkml.kernel.org/r/1323073238-32686-1-git-send-email-daniel@numascale-asia.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
9a0ebfbe3f | |
x86, ioapic: Only print ioapic debug information for IRQs belonging to an ioapic chip
with "apic=verbose" the print_IO_APIC() function tries to print IRQ to pin mappings for every active irq. It assumes chip_data is of type irq_cfg and may cause an oops if not. As the print_IO_APIC() is called from a late_initcall other chained irq chips may already be registered with custom chip_data information, causing an oops. This is the case with intel MID SoC devices with gpio demuxers registered as irq_chips. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> [ -v2: fixed build failure ] Signed-off-by: Ingo Molnar <mingo@elte.hu> |
6fd36ba021 | |
x86/apic: Allow use of lapic timer early calibration result
lapic timer calibration can be combined with tsc in platform specific calibration functions. if such calibration result is obtained early, we can skip the redundant calibration loops. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> |
1ade93efd0 | |
x86/apic: Do not clear nr_irqs_gsi if no legacy irqs
nr_legacy_irqs is set in probe_nr_irqs_gsi, we should not clear it after that. Otherwise, the result is that MSI irqs will be allocated from the wrong range for the systems without legacy PIC. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> |
bb84ac2d3a | |
Merge branch 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: uv2: Workaround for UV2 Hub bug (system global address format) |
d630ba565f | |
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Standardize on CONFIG_SPARSE_IRQ=y x86, ioapic: Clean up ioapic/apic_id usage x86, ioapic: Factor out print_IO_APIC() to only print one io apic x86, ioapic: Print out irte with right ioapic index x86, ioapic: Split up setup_ioapic_entry() x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq() apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches |
0791e98dd1 | |
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
perf symbols: Increase symbol KSYM_NAME_LEN size
perf hists browser: Refuse 'a' hotkey on non symbolic views
perf ui browser: Use libslang to read keys
perf tools: Fix tracing info recording
perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
perf hists: Don't consider filtered entries when calculating column widths
perf hists: Don't decay total_period for filtered entries
perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
perf hists browser: Do not exit on tab key with single event
perf annotate browser: Don't change selection line when returning from callq
perf tools: handle endianness of feature bitmap
perf tools: Add prelink suggestion to dso update message
perf script: Fix unknown feature comment
perf hists browser: Apply the dso and thread filters when merging new batches
perf hists: Move the dso and thread filters from hist_browser
perf ui browser: Honour the xterm colors
perf top tui: Give color hints just on the percentage, like on --stdio
perf ui browser: Make the colors configurable and change the defaults
perf tui: Remove unneeded call to newtCls on startup
perf hists: Don't format the percentage on hist_entry__snprintf
...
Fix up conflicts in arch/x86/kernel/kprobes.c manually.
Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?). But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..
Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge. Make
sure that new use also uses the raw accessor functions.
|
7115e3fcf4 | |
x86/irq: Standardize on CONFIG_SPARSE_IRQ=y
Sparseirq got introduced in v2.6.28 and Thomas did a huge cleanup around v2.6.38 that eliminated basically all disadvantages of it. So we can remove non-sparseirq support now and simplify our IRQ degrees of freedom a bit. Suggested-and-acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/4E95E21D.6090200@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
141d55e6cc | |
x86, ioapic: Clean up ioapic/apic_id usage
While looking at the code, apic_id sometime is referred to index of ioapic, but sometime is used for phys apic id. and some even use apic for real apic id. It is very confusing. So try to limit apic_id or ioapic_id to be real apic id for ioapic, and use ioapic_idx for ioapic index in the array. -v2: Suggested by Ingo, use ioapic_idx consistently, instead of ioapic Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542DC.3090509@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
6f50d45fae | |
x86, ioapic: Factor out print_IO_APIC() to only print one io apic
It is getting too big after the interrupt remaping entries debug print out was added. Original print_IO_APIC() becomes print_IO_APICs(). New print_IO_APIC() will only print one ioapic's registers As a side-effect this clean-up also made checkpatch.pl happier. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542D3.5000008@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
cda417dd87 | |
x86, ioapic: Print out irte with right ioapic index
While checking irte dump in dmesg, the print out is confusing
ioapic index with real io apic id:
IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0
Active:0 Dest:1) IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1
Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31
Dest:00000001 SID:00FF SQ:0 SVT:1) IOAPIC[0]: Set routing entry
(1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001 SID:00FF SQ:0 SVT:1)
The system's first ioapic id is 1.
This commit:
| commit
|
3a61d7feca | |
x86, ioapic: Split up setup_ioapic_entry()
Ingo pointed out that setup_ioapic_entry() is way too big now. Split the intr-remap code out into setup_ir_ioapic_entry(). Also pass struct io_apic_irq_attr * instead of 5 parameters in those two functions. At last in setup_ir_ioapic_entry() we don't need to panic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542BB.4070807@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
c5b4712c3f | |
x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq()
Do not expand that struct, and just pass pointer to reduce the number of parameters in related functions. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542B1.7050800@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
e4aff81182 | |
x86, nmi: Wire up NMI handlers to new routines
Just convert all the files that have an nmi handler to the new routines. Most of it is straight forward conversion. A couple of places needed some tweaking like kgdb which separates the debug notifier from the nmi handler and mce removes a call to notify_die. [Thanks to Ying for finding out the history behind that mce call https://lkml.org/lkml/2010/5/27/114 And Boris responding that he would like to remove that call because of it https://lkml.org/lkml/2011/9/21/163] The things that get converted are the registeration/unregistration routines and the nmi handler itself has its args changed along with code removal to check which list it is on (most are on one NMI list except for kgdb which has both an NMI routine and an NMI Unknown routine). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Corey Minyard <minyard@acm.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Corey Minyard <minyard@acm.org> Cc: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
9c48f1c629 | |
apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches
These warnings (generally one per CPU) are a result of initializing x86_cpu_to_logical_apicid while apic_default is still in use, but the check in setup_local_APIC() being done when apic_bigsmp was already used as an override in default_setup_apic_routing(): Overriding APIC driver with bigsmp Enabling APIC mode: Physflat. Using 5 I/O APICs ------------[ cut here ]------------ WARNING: at .../arch/x86/kernel/apic/apic.c:1239 ... CPU 1 irqstacks, hard=f1c9a000 soft=f1c9c000 Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 9e000 Initializing CPU#1 ------------[ cut here ]------------ WARNING: at .../arch/x86/kernel/apic/apic.c:1239 setup_local_APIC+0x137/0x46b() Hardware name: ... CPU1 logical APIC ID: 2 != 8 ... Fix this (for the time being, i.e. until x86_32_early_logical_apicid() will get removed again, as Tejun says ought to be possible) by overriding the previously stored values at the point where the APIC driver gets overridden. v2: Move this and the pre-existing override logic into arch/x86/kernel/apic/bigsmp_32.c. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@kernel.org> (2.6.39 and onwards) Link: http://lkml.kernel.org/r/4E835D16020000780005844C@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
838312be46 | |
x86: uv2: Workaround for UV2 Hub bug (system global address format)
This is a workaround for a UV2 hub bug that affects the format of system global addresses. The GRU API for UV2 was inadvertently broken by a hardware change. The format of the physical address used for TLB dropins and for addresses used with instructions running in unmapped mode has changed. This change was not documented and became apparent only when diags failed running on system simulators. For UV1, TLB and GRU instruction physical addresses are identical to socket physical addresses (although high NASID bits must be OR'ed into the address). For UV2, socket physical addresses need to be converted. The NODE portion of the physical address needs to be shifted so that the low bit is in bit 39 or bit 40, depending on an MMR value. It is not yet clear if this bug will be fixed in a silicon respin. If it is fixed, the hub revision will be incremented & the workaround disabled. Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
6a469e4665 | |
x86, ioapic: Consolidate the explicit EOI code
Consolidate the io-apic EOI code in clear_IO_APIC_pin() and eoi_ioapic_irq(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Rafael Wysocki <rjw@novell.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: lchiquitto@novell.com Cc: jbeulich@novell.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110825190657.259696697@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
c020570138 | |
x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()
For older IO-APIC's, we were clearing the remote-IRR by changing
the RTE trigger mode to edge and then back to level. We wanted
to mask the RTE during this process, so we were essentially
doing mask+edge and then to unmask+level.
As part of the commit
|
e57253a81d | |
x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC
In the kdump scenario mentioned below, we can have a case where the device using level triggered interrupt will not generate any interrupts in the kdump kernel. 1. IO-APIC sends a level triggered interrupt to the CPU's local APIC. 2. Kernel crashed before the CPU services this interrupt, leaving the remote-IRR in the IO-APIC set. 3. kdump kernel boot sequence does clear_IO_APIC() as part of IO-APIC initialization. But this fails to reset remote-IRR bit of the IO-APIC RTE as the remote-IRR bit is read-only. 4. Device using that level triggered entry can't generate any more interrupts because of the remote-IRR bit. In clear_IO_APIC_pin(), check if the remote-IRR bit is set and if so do an explicit attempt to clear it (by doing EOI write on modern io-apic's and changing trigger mode to edge/level on older io-apic's). Also before doing the explicit EOI to the io-apic, ensure that the trigger mode is indeed set to level. This will enable the explicit EOI to the io-apic to reset the remote-IRR bit. Tested-by: Leonardo Chiquitto <lchiquitto@novell.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Fixes: https://bugzilla.novell.com/show_bug.cgi?id=701686 Cc: Rafael Wysocki <rjw@novell.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Thomas Renninger <trenn@suse.de> Cc: jbeulich@novell.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110825190657.157502602@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
1e75b31d63 | |
iommu: Rename the DMAR and INTR_REMAP config options
Change the CONFIG_DMAR to CONFIG_INTEL_IOMMU to be consistent with the other IOMMU options. Rename the CONFIG_INTR_REMAP to CONFIG_IRQ_REMAP to match the irq subsystem name. And define the CONFIG_DMAR_TABLE for the common ACPI DMAR routines shared by both CONFIG_INTEL_IOMMU and CONFIG_IRQ_REMAP. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.558630224@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
d3f138106b | |
x86, ioapic: Define irq_remap_modify_chip_defaults()
Define irq_remap_modify_chip_defaults() and remove the duplicate code, cleanup the unnecessary ifdefs. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.499225692@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
c39d77ffa2 | |
x86, msi, intr-remap: Use the ioapic set affinity routine
IRQ set affinity routine is same for the IO-APIC IRQ's aswell as the MSI IRQ's in the presence of interrupt-remapping. This is because we modify the interrupt-remapping table entry and doesn't touch the IO-APIC RTE or the MSI entry. So remove the ir_msi_set_affinity() and re-use the ir_ioapic_set_affinity() Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.452760446@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
13ea20f7a2 | |
x86, x2apic: Enable the bios request for x2apic optout
On the platforms which are x2apic and interrupt-remapping capable, Linux kernel is enabling x2apic even if the BIOS doesn't. This is to take advantage of the features that x2apic brings in. Some of the OEM platforms are running into issues because of this, as their bios is not x2apic aware. For example, this was resulting in interrupt migration issues on one of the platforms. Also if the BIOS SMI handling uses APIC interface to send SMI's, then the BIOS need to be aware of x2apic mode that OS has enabled. On some of these platforms, BIOS doesn't have a HW mechanism to turnoff the x2apic feature to prevent OS from enabling it. To resolve this mess, recent changes to the VT-d2 specification: http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf includes a mechanism that provides BIOS a way to request system software to opt out of enabling x2apic mode. Look at the x2apic optout flag in the DMAR tables before enabling the x2apic mode in the platform. Also print a warning that we have disabled x2apic based on the BIOS request. Kernel boot parameter "intremap=no_x2apic_optout" can be used to override the BIOS x2apic optout request. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.171766616@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
41750d31fc | |
x86, UV: Remove UV delay in starting slave cpus
Delete the 10 msec delay between the INIT and SIPI when starting slave cpus. I can find no requirement for this delay. BIOS also has similar code sequences without the delay. Removing the delay reduces boot time by 40 sec. Every bit helps. Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20110805140900.GA6774@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
05e33fc20e | |
atomic: use <linux/atomic.h>
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
60063497a9 | |
Merge branches 'x86-detect-hyper-for-linus', 'x86-fpu-for-linus', 'x86-kexec-for-linus', 'x86-platform-for-linus', 'x86-quirks-for-linus', 'x86-tsc-for-linus' and 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-detect-hyper-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hyper: Change hypervisor detection order * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, fpu: Fix DNA exception during check_fpu() * 'x86-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kexec, x86: Fix incorrect jump back address if not preserving context * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, config: Introduce an INTEL_MID configuration * 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, quirks: Use pci_dev->revision * 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: tsc: Remove unneeded DMI-based blacklisting * 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit |
b4db920c7f | |
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabled x86, ioapic: Print IRTE when IR is enabled x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSR x86, ioapic: Also print Dest field x86, ioapic: Format clean up for IOAPIC output x86: print APIC data a little later during boot |
2c9e88a108 | |
Merge branch 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mips: Fix i8253 clockevent fallout i8253: Cleanup outb/inb magic arm: Footbridge: Use common i8253 clockevent mips: Use common i8253 clockevent x86: Use common i8253 clockevent i8253: Create common clockevent implementation i8253: Export i8253_lock unconditionally pcpskr: MIPS: Make config dependencies finer grained pcspkr: Cleanup Kconfig dependencies i8253: Move remaining content and delete asm/i8253.h i8253: Consolidate definitions of PIT_LATCH x86: i8253: Consolidate definitions of global_clock_event i8253: Alpha, PowerPC: Remove unused asm/8253pit.h alpha: i8253: Cleanup remaining users of i8253pit.h i8253: Remove I8253_LOCK config i8253: Make pcsp sound driver use the shared i8253_lock i8253: Make pcspkr input driver use the shared i8253_lock i8253: Consolidate all kernel definitions of i8253_lock i8253: Unify all kernel declarations of i8253_lock i8253: Create linux/i8253.h and use it in all 8253 related files |
a99a7d1436 | |
x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabled
When IR (interrupt remapping) is enabled print_IO_APIC() displays output according to legacy RTE (redirection table entry) definitons: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 01 02 00 0 0 0 0 0 0 0 02 03 00 1 0 0 0 0 0 0 03 04 00 1 0 0 0 0 0 0 04 05 00 1 0 0 0 0 0 0 05 06 00 1 0 0 0 0 0 0 06 ... The above output is as per Sec 3.2.4 of the IOAPIC datasheet: 82093AA I/O Advanced Programmable Interrupt Controller (IOAPIC): http://download.intel.com/design/chipsets/datashts/29056601.pdf Instead the output should display the fields as discussed in Sec 5.5.1 of the VT-d specification: (Intel Virtualization Technology for Directed I/O: http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf) After the fix: NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect: 00 0000 0 1 0 0 0 0 0 0 00 01 000F 1 0 0 0 0 0 0 0 01 02 0001 1 0 0 0 0 0 0 0 02 03 0002 1 1 0 0 0 0 0 0 03 04 0011 1 1 0 0 0 0 0 0 04 05 0004 1 1 0 0 0 0 0 0 05 06 0005 1 1 0 0 0 0 0 0 06 ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211658.2939.93123.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
42f0efc5aa | |
x86, ioapic: Print IRTE when IR is enabled
When "apic=debug" is used as a boot parameter, Linux prints the IOAPIC routing entries in "dmesg". Below is output from IOAPIC whose apic_id is 8: # dmesg | grep "routing entry" IOAPIC[8]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Similarly, when IR (interrupt remapping) is enabled, and the IRTE (interrupt remapping table entry) is set up we should display it. After the fix: # dmesg | grep IRTE IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:31 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:33 Dest:00000000 SID:00F1 SQ:0 SVT:1) ... The IRTE is defined in Sec 9.5 of the Intel VT-d Specification. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211704.2939.71291.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
3040db92ee | |
x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSR
If there's no special reason to zero-out the "high" 32-bits of the IA32_APIC_BASE MSR, let's preserve it. The x2APIC Specification doesn't explicitly state any such requirement. (Sec 2.2 in: http://www.intel.com/Assets/PDF/manual/318148.pdf). Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712055831.2498.78521.sendpatchset@nchumbalkar.americas.cpqcorp.net Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
2597085228 | |
x86, ioapic: Also print Dest field
The code in setup_ioapic_irq() determines the Destination Field, so why not also include it in the debug printk output that gets displayed when the boot parameter "apic=debug" is used. Before the change, "dmesg" will show: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) ... After the change, you will see: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184603.2734.91071.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu> |
7fece83235 | |
x86, ioapic: Format clean up for IOAPIC output
When IOAPIC data is displayed in "dmesg" with the help of the boot parameter "apic=debug" certain values are not formatted correctly wrt their size. In the "dmesg" snippet below, note that the output for "max redirection entries", and "IO APIC version" which are each defined to be just 8-bits long are displayed as 2 bytes in length. Similarly, "Dst" under the "IRQ redirection table" should only be 8-bits long. IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 ... ... Do some formatting clean up, so you will see output like below: IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 31 02 00 0 0 0 0 0 0 0 30 03 00 1 0 0 0 0 0 0 33 ... ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184557.2734.61830.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu> |
bd6a46e087 | |
x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit
nr_cpus allows one to specify number of possible cpus in the system.
Current assumption seems to be that first cpu to show up is boot cpu
and this assumption will be broken in kdump scenario where we can be
booting on a non boot cpu with nr_cpus=1.
It might happen that first cpu we parse is not the cpu we boot on and
later we ignore boot cpu. Though code later seems to recognize this
anomaly and forcibly sets boot cpu in physical cpu map with following
warning.
if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) {
printk(KERN_WARNING
"weird, boot CPU (#%d) not listed by the BIOS.\n",
hard_smp_processor_id());
physid_set(hard_smp_processor_id(), phys_cpu_present_map);
}
This patch waits for boot cpu to show up and starts ignoring the cpus
once we have hit (nr_cpus - 1) number of cpus. So effectively we are
reserving one slot out of nr_cpus for boot cpu explicitly.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/20110708171926.GF2930@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
|
14cb6dcf0a | |
x86: print APIC data a little later during boot
To view IOAPIC data you could boot with "apic=debug". When booting in such a way then the kernel will dump the IO-APIC's registers, for example: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 0 0 0 0 0 0 0 33 04 000 0 0 0 0 0 0 0 34 05 000 0 0 0 0 0 0 0 35 06 000 0 0 0 0 0 0 0 36 07 000 0 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 0 0 0 0 0 0 0 3A 0b 000 0 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 0 0 0 0 0 0 0 3D 0e 000 0 0 0 0 0 0 0 3E 0f 000 0 0 0 0 0 0 0 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 Delaying the call to print_ICs() gives better results: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 04 000 1 0 0 0 0 0 0 34 05 000 1 0 0 0 0 0 0 35 06 000 1 0 0 0 0 0 0 36 07 000 1 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 1 0 0 0 0 0 0 3A 0b 000 1 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 1 0 0 0 0 0 0 3D 0e 000 1 0 0 0 0 0 0 3E 0f 000 1 0 0 0 0 0 0 3F 10 000 1 1 0 1 0 0 0 29 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 0 1 0 1 0 0 0 51 15 000 1 0 0 0 0 0 0 00 16 000 0 1 0 1 0 0 0 61 17 000 0 1 0 1 0 0 0 59 Notice that the entries beyond interrupt input signal 0x0f also get populated and arent just the hw-initialization default of all zeroes. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708083555.2598.42216.sendpatchset@nchumbalkar.americas.hpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu> |
ded1f6ab43 | |
Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Compare only lower 32 bits of framebuffer map offsets drm/i915: Don't leak in i915_gem_shmem_pread_slow() drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit drm/radeon/kms: fix mac g5 quirk x86/uv/x2apic: update for change in pci bridge handling. alpha, drm: Remove obsolete Alpha support in MGA DRM code alpha/drm: Cleanup Alpha support in DRM generic code savage: remove unnecessary if statement drm/radeon: fix GUI idle IH debug statements drm/radeon/kms: check modes against max pixel clock drm: fix fbs in DRM_IOCTL_MODE_GETRESOURCES ioctl |
f39e840995 | |
x86/uv/x2apic: update for change in pci bridge handling.
When I added
|
7ad35cf288 | |
x86: i8253: Consolidate definitions of global_clock_event
There are multiple declarations of global_clock_event in header files specific to particular clock event implementations. Consolidate them in <asm/time.h> and make sure all users include that header. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Venkatesh Pallipadi (Venki) <venki@google.com> Link: http://lkml.kernel.org/r/20110601180610.762763451@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
16f871bc30 | |
i8253: Create linux/i8253.h and use it in all 8253 related files
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> arch/arm/mach-footbridge/isa-timer.c | 2 +- arch/mips/cobalt/time.c | 2 +- arch/mips/jazz/irq.c | 2 +- arch/mips/kernel/i8253.c | 2 +- arch/mips/mti-malta/malta-time.c | 2 +- arch/mips/sgi-ip22/ip22-time.c | 2 +- arch/mips/sni/time.c | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apm_32.c | 2 +- arch/x86/kernel/hpet.c | 2 +- arch/x86/kernel/i8253.c | 2 +- arch/x86/kernel/time.c | 2 +- drivers/block/hd.c | 2 +- drivers/clocksource/i8253.c | 2 +- drivers/input/gameport/gameport.c | 2 +- drivers/input/joystick/analog.c | 2 +- drivers/input/misc/pcspkr.c | 2 +- include/linux/i8253.h | 11 +++++++++++ sound/drivers/pcsp/pcsp.h | 2 +- 19 files changed, 29 insertions(+), 18 deletions(-) |
334955ef96 | |
|
Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
|
86dd7909c2 | |
oprofile, x86: Add comments to IBS LVT offset initialization
Adding a comment in the code as IBS LVT setup is not obvious at all ... Signed-off-by: Robert Richter <robert.richter@amd.com> |
cbf74cea07 | |
x86, UV: Add support for SGI UV2 hub chip
This patch adds support for a new version of the SGI UV hub chip. The hub chip is the node controller that connects multiple blades into a larger coherent SSI. For the most part, UV2 is compatible with UV1. The majority of the changes are in the addresses of MMRs and in a few cases, the contents of MMRs. These changes are the result in changes in the system topology such as node configuration, processor types, maximum nodes, physical address sizes, etc. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
2a919596c1 | |
x86, ioapic: Restore ioapic entries during resume properly
In mask/restore_ioapic_entries() we should be restoring ioapic entries when ioapics[apic].saved_registers is not NULL. Fix the typo and address the resume hang regression reported by Linus. This was not found sooner because the systems where these changes were tested on kept the IO-APIC entries intact over resume. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Daniel J Blueman <daniel.blueman@gmail.com> Link: http://lkml.kernel.org/r/1306259131.7171.7.camel@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
2f344d2e51 | |
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Include module.h header in apic_flat_64.c x86, apic: Make apic drivers static x86, apic: Clean up bigsmp apic selection code x86, apic: Use .apicdrivers section for the apic drivers list x86, apic: Introduce .apicdrivers section to find the list of apic drivers x86, x2apic: Move the common bits to x2apic.h x86, x2apic: Minimize IPI register writes using cluster groups x86, x2apic: Track the x2apic cluster sibling map x86, x2apic: Remove duplicate code for IPI mask routines x86, apic: Use probe routines to simplify apic selection x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic' x86, ioapic: Consolidate gsi routing info into 'struct ioapic' x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic' x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic' x86, ioapic: Add struct ioapic x86, ioapic: Remove duplicate code for saving/restoring RTEs x86, ioapic: Use ioapic_saved_data while enabling intr-remapping x86, ioapic: Allocate ioapic_saved_data early x86, ioapic: Fix potential resume deadlock |
ea2b50ef4c | |
x86, apic: Include module.h header in apic_flat_64.c
apic_flat_64.c needs to include module.h because it uses EXPORT_SYMBOL_GPL(). This fixes these warnings on some !SMP randconfigs: arch/x86/kernel/apic/apic_flat_64.c:31: warning: data definition has no type or storage class arch/x86/kernel/apic/apic_flat_64.c:31: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/kernel/apic/apic_flat_64.c:31: warning: parameter names (without types) in function declaration Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20110523104300.dd532a99.randy.dunlap@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
b18bf0948e | |
watchdog: Change the default timeout and configure nmi watchdog period based on watchdog_thresh
Before the conversion of the NMI watchdog to perf event, the watchdog timeout was 5 seconds. Now it is 60 seconds. For my particular application, netbooks, 5 seconds was a better timeout. With a short timeout, we catch faults earlier and are able to send back a panic. With a 60 second timeout, the user is unlikely to wait and will instead hit the power button, causing us to lose the panic info. This change configures the NMI period to watchdog_thresh and sets the softlockup_thresh to watchdog_thresh * 2. In addition, watchdog_thresh was reduced to 10 seconds as suggested by Ingo Molnar. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1306127423-3347-4-git-send-email-msb@chromium.org Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20110517071642.GF22305@elte.hu> |
4eec42f392 | |
x86, apic: Make apic drivers static
Apic probe now looks at the apic drivers listed in the .apicdrivers section. Remove apic_probe[] and make each apic driver static. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
1a8880a142 |