mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-20 06:38:13 +07:00
| SHA1 | ||
|---|---|---|
[ Upstream commit 5343da4c17429efaa5fb1594ea96aee1a283e694 ]
Current code doesn't limit the number of nested devices.
Nested devices would be handled recursively and this needs huge stack
memory. So, unlimited nested devices could make stack overflow.
This patch adds upper_level and lower_level, they are common variables
and represent maximum lower/upper depth.
When upper/lower device is attached or dettached,
{lower/upper}_level are updated. and if maximum depth is bigger than 8,
attach routine fails and returns -EMLINK.
In addition, this patch converts recursive routine of
netdev_walk_all_{lower/upper} to iterator routine.
Test commands:
ip link add dummy0 type dummy
ip link add link dummy0 name vlan1 type vlan id 1
ip link set vlan1 up
for i in {2..55}
do
let A=$i-1
ip link add vlan$i link vlan$A type vlan id $i
done
ip link del dummy0
Splat looks like:
[ 155.513226][ T908] BUG: KASAN: use-after-free in __unwind_start+0x71/0x850
[ 155.514162][ T908] Write of size 88 at addr ffff8880608a6cc0 by task ip/908
[ 155.515048][ T908]
[ 155.515333][ T908] CPU: 0 PID: 908 Comm: ip Not tainted 5.4.0-rc3+ #96
[ 155.516147][ T908] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 155.517233][ T908] Call Trace:
[ 155.517627][ T908]
[ 155.517918][ T908] Allocated by task 0:
[ 155.518412][ T908] (stack is not available)
[ 155.518955][ T908]
[ 155.519228][ T908] Freed by task 0:
[ 155.519885][ T908] (stack is not available)
[ 155.520452][ T908]
[ 155.520729][ T908] The buggy address belongs to the object at ffff8880608a6ac0
[ 155.520729][ T908] which belongs to the cache names_cache of size 4096
[ 155.522387][ T908] The buggy address is located 512 bytes inside of
[ 155.522387][ T908] 4096-byte region [ffff8880608a6ac0, ffff8880608a7ac0)
[ 155.523920][ T908] The buggy address belongs to the page:
[ 155.524552][ T908] page:ffffea0001822800 refcount:1 mapcount:0 mapping:ffff88806c657cc0 index:0x0 compound_mapcount:0
[ 155.525836][ T908] flags: 0x100000000010200(slab|head)
[ 155.526445][ T908] raw: 0100000000010200 ffffea0001813808 ffffea0001a26c08 ffff88806c657cc0
[ 155.527424][ T908] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[ 155.528429][ T908] page dumped because: kasan: bad access detected
[ 155.529158][ T908]
[ 155.529410][ T908] Memory state around the buggy address:
[ 155.530060][ T908] ffff8880608a6b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 155.530971][ T908] ffff8880608a6c00: fb fb fb fb fb f1 f1 f1 f1 00 f2 f2 f2 f3 f3 f3
[ 155.531889][ T908] >ffff8880608a6c80: f3 fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 155.532806][ T908] ^
[ 155.533509][ T908] ffff8880608a6d00: fb fb fb fb fb fb fb fb fb f1 f1 f1 f1 00 00 00
[ 155.534436][ T908] ffff8880608a6d80: f2 f3 f3 f3 f3 fb fb fb 00 00 00 00 00 00 00 00
[ ... ]
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Taehee Yoo
authored and
 Greg Kroah-Hartman
commited |
a2e065542a | |
[ Upstream commit 501a90c945103e8627406763dac418f20f3837b2 ]
syzbot was once again able to crash a host by setting a very small mtu
on loopback device.
Let's make inetdev_valid_mtu() available in include/net/ip.h,
and use it in ip_setup_cork(), so that we protect both ip_append_page()
and __ip_append_data()
Also add a READ_ONCE() when the device mtu is read.
Pairs this lockless read with one WRITE_ONCE() in __dev_set_mtu(),
even if other code paths might write over this field.
Add a big comment in include/linux/netdevice.h about dev->mtu
needing READ_ONCE()/WRITE_ONCE() annotations.
Hopefully we will add the missing ones in followup patches.
[1]
refcount_t: saturated; leaking memory.
WARNING: CPU: 0 PID: 9464 at lib/refcount.c:22 refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 9464 Comm: syz-executor850 Not tainted 5.4.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x197/0x210 lib/dump_stack.c:118
panic+0x2e3/0x75c kernel/panic.c:221
__warn.cold+0x2f/0x3e kernel/panic.c:582
report_bug+0x289/0x300 lib/bug.c:195
fixup_bug arch/x86/kernel/traps.c:174 [inline]
fixup_bug arch/x86/kernel/traps.c:169 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:267
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:286
invalid_op+0x23/0x30 arch/x86/entry/entry_64.S:1027
RIP: 0010:refcount_warn_saturate+0x138/0x1f0 lib/refcount.c:22
Code: 06 31 ff 89 de e8 c8 f5 e6 fd 84 db 0f 85 6f ff ff ff e8 7b f4 e6 fd 48 c7 c7 e0 71 4f 88 c6 05 56 a6 a4 06 01 e8 c7 a8 b7 fd <0f> 0b e9 50 ff ff ff e8 5c f4 e6 fd 0f b6 1d 3d a6 a4 06 31 ff 89
RSP: 0018:ffff88809689f550 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff815e4336 RDI: ffffed1012d13e9c
RBP: ffff88809689f560 R08: ffff88809c50a3c0 R09: fffffbfff15d31b1
R10: fffffbfff15d31b0 R11: ffffffff8ae98d87 R12: 0000000000000001
R13: 0000000000040100 R14: ffff888099041104 R15: ffff888218d96e40
refcount_add include/linux/refcount.h:193 [inline]
skb_set_owner_w+0x2b6/0x410 net/core/sock.c:1999
sock_wmalloc+0xf1/0x120 net/core/sock.c:2096
ip_append_page+0x7ef/0x1190 net/ipv4/ip_output.c:1383
udp_sendpage+0x1c7/0x480 net/ipv4/udp.c:1276
inet_sendpage+0xdb/0x150 net/ipv4/af_inet.c:821
kernel_sendpage+0x92/0xf0 net/socket.c:3794
sock_sendpage+0x8b/0xc0 net/socket.c:936
pipe_to_sendpage+0x2da/0x3c0 fs/splice.c:458
splice_from_pipe_feed fs/splice.c:512 [inline]
__splice_from_pipe+0x3ee/0x7c0 fs/splice.c:636
splice_from_pipe+0x108/0x170 fs/splice.c:671
generic_splice_sendpage+0x3c/0x50 fs/splice.c:842
do_splice_from fs/splice.c:861 [inline]
direct_splice_actor+0x123/0x190 fs/splice.c:1035
splice_direct_to_actor+0x3b4/0xa30 fs/splice.c:990
do_splice_direct+0x1da/0x2a0 fs/splice.c:1078
do_sendfile+0x597/0xd00 fs/read_write.c:1464
__do_sys_sendfile64 fs/read_write.c:1525 [inline]
__se_sys_sendfile64 fs/read_write.c:1511 [inline]
__x64_sys_sendfile64+0x1dd/0x220 fs/read_write.c:1511
do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x441409
Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffb64c4f78 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441409
RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000000000005
RBP: 0000000000073b8a R08: 0000000000000010 R09: 0000000000000010
R10: 0000000000010001 R11: 0000000000000246 R12: 0000000000402180
R13: 0000000000402210 R14: 0000000000000000 R15: 0000000000000000
Kernel Offset: disabled
Rebooting in 86400 seconds..
Fixes:
Eric Dumazet
authored and
Greg Kroah-Hartman
commited |
d80d67cdaf | |
[ Upstream commit f4d7b3e23d259c44f1f1c39645450680fcd935d6 ] 1 << 31 is Undefined Behaviour according to the C standard. Use U type modifier to avoid theoretical overflow. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Andy Shevchenko
authored and
Greg Kroah-Hartman
commited |
4ccab1788e | |
[ Upstream commit 8065a779f17e94536a1c4dcee4f9d88011672f97 ]
When a netdev appears through hot plug then gets enslaved by a failover
master that is already up and running, the slave will be opened
right away after getting enslaved. Today there's a race that userspace
(udev) may fail to rename the slave if the kernel (net_failover)
opens the slave earlier than when the userspace rename happens.
Unlike bond or team, the primary slave of failover can't be renamed by
userspace ahead of time, since the kernel initiated auto-enslavement is
unable to, or rather, is never meant to be synchronized with the rename
request from userspace.
As the failover slave interfaces are not designed to be operated
directly by userspace apps: IP configuration, filter rules with
regard to network traffic passing and etc., should all be done on master
interface. In general, userspace apps only care about the
name of master interface, while slave names are less important as long
as admin users can see reliable names that may carry
other information describing the netdev. For e.g., they can infer that
"ens3nsby" is a standby slave of "ens3", while for a
name like "eth0" they can't tell which master it belongs to.
Historically the name of IFF_UP interface can't be changed because
there might be admin script or management software that is already
relying on such behavior and assumes that the slave name can't be
changed once UP. But failover is special: with the in-kernel
auto-enslavement mechanism, the userspace expectation for device
enumeration and bring-up order is already broken. Previously initramfs
and various userspace config tools were modified to bypass failover
slaves because of auto-enslavement and duplicate MAC address. Similarly,
in case that users care about seeing reliable slave name, the new type
of failover slaves needs to be taken care of specifically in userspace
anyway.
It's less risky to lift up the rename restriction on failover slave
which is already UP. Although it's possible this change may potentially
break userspace component (most likely configuration scripts or
management software) that assumes slave name can't be changed while
UP, it's relatively a limited and controllable set among all userspace
components, which can be fixed specifically to listen for the rename
events on failover slaves. Userspace component interacting with slaves
is expected to be changed to operate on failover master interface
instead, as the failover slave is dynamic in nature which may come and
go at any point. The goal is to make the role of failover slaves less
relevant, and userspace components should only deal with failover master
in the long run.
Fixes:
Si-Wei Liu
authored and
Greg Kroah-Hartman
commited |
fae6053d76 | |
[ Upstream commit d5256083f62e2720f75bb3c5a928a0afe47d6bc3 ] While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin, I ran into the issue that while l3 mode is working fine, l3s mode does not have any connectivity to kube-apiserver and hence all pods end up in Error state as well. The ipvlan master device sits on top of a bond device and hostns traffic to kube-apiserver (also running in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573 where the latter is the address of the bond0. While in l3 mode, a curl to https://10.152.183.1:443 or to https://139.178.29.207:37573 works fine from hostns, neither of them do in case of l3s. In the latter only a curl to https://127.0.0.1:37573 appeared to work where for local addresses of bond0 I saw kernel suddenly starting to emit ARP requests to query HW address of bond0 which remained unanswered and neighbor entries in INCOMPLETE state. These ARP requests only happen while in l3s. Debugging this further, I found the issue is that l3s mode is piggy- backing on l3 master device, and in this case local routes are using l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit 
Daniel Borkmann
authored and
Greg Kroah-Hartman
commited |
fcc9c69a6e | |
Since commit 
Sabrina Dubroca
authored and
 David S. Miller
commited |
af7d6cce53 | |
Add flag wol_enabled to struct net_device indicating whether
Wake-on-LAN is enabled. As first user phy_suspend() will use it to
decide whether PHY can be suspended or not.
Fixes:
Heiner Kallweit
authored and
David S. Miller
commited |
6194114324 | |
Building virtio_net driver without CONFIG_XPS fails with:
drivers/net/virtio_net.c: In function ‘virtnet_set_affinity’:
drivers/net/virtio_net.c:1910:3: error: implicit declaration of function ‘__netif_set_xps_queue’ [-Werror=implicit-function-declaration]
__netif_set_xps_queue(vi->dev, mask, i, false);
^
Fixes:
Krzysztof Kozlowski
authored and
David S. Miller
commited |
c9fbb2d252 | |
Currently drivers have to check if they already have a umem installed for a given queue and return an error if so. Make better use of XDP_QUERY_XSK_UMEM and move this functionality to the core. We need to keep rtnl across the calls now. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Jakub Kicinski
authored and
David S. Miller
commited |
84c6b86875 | |
We used to depend on real_num_rx_queues as a upper bound for sanity checks. For AF_XDP socket validation it's useful if the check behaves the same regardless of CONFIG_SYSFS setting. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski
authored and
David S. Miller
commited |
c29c2ebd2a | |
If an invalid MTU value is set through rtnetlink return extra error information instead of putting message in kernel log. For other cases where there is no visible API, keep the error report in the log. Example: # ip li set dev enp12s0 mtu 10000 Error: mtu greater than device maximum. # ifconfig enp12s0 mtu 10000 SIOCSIFMTU: Invalid argument # dmesg | tail -1 [ 2047.795467] enp12s0: mtu greater than device maximum Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net> 
Stephen Hemminger
authored and
David S. Miller
commited |
7a4c53bee3 | |
gro_hash size is 192 bytes, and uses 3 cache lines, if there is few flows, gro_hash may be not fully used, so it is unnecessary to iterate all gro_hash in napi_gro_flush(), to occupy unnecessary cacheline. convert gro_count to a bitmask, and rename it as gro_bitmask, each bit represents a element of gro_hash, only flush a gro_hash element if the related bit is set, to speed up napi_gro_flush(). and update gro_bitmask only if it will be changed, to reduce cache update Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Cc: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Li RongQing
authored and
David S. Miller
commited |
d9f37d01e2 | |
Add new netdev tls op for resynchronizing HW tls context Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Boris Pismenny
authored and
David S. Miller
commited |
16e4edc297 | |
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-15 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Various different arm32 JIT improvements in order to optimize code emission and make the JIT code itself more robust, from Russell. 2) Support simultaneous driver and offloaded XDP in order to allow for advanced use-cases where some work is offloaded to the NIC and some to the host. Also add ability for bpftool to load programs and maps beyond just the cgroup case, from Jakub. 3) Add BPF JIT support in nfp for multiplication as well as division. For the latter in particular, it uses the reciprocal algorithm to emulate it, from Jiong. 4) Add BTF pretty print functionality to bpftool in plain and JSON output format, from Okash. 5) Add build and installation to the BPF helper man page into bpftool, from Quentin. 6) Add a TCP BPF callback for listening sockets which is triggered right after the socket transitions to TCP_LISTEN state, from Andrey. 7) Add a new cgroup tree command to bpftool which iterates over the whole cgroup tree and prints all attached programs, from Roman. 8) Improve xdp_redirect_cpu sample to support parsing of double VLAN tagged packets, from Jesper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
commited |
2aa4a3378a | |
Split the query of HW-attached program from the software one. Introduce new .ndo_bpf command to query HW-attached program. This will allow drivers to install different programs in HW and SW at the same time. Netlink can now also carry multiple programs on dump (in which case mode will be set to XDP_ATTACHED_MULTI and user has to check per-attachment point attributes, IFLA_XDP_PROG_ID will not be present). We reuse IFLA_XDP_PROG_ID skb space for second mode, so rtnl_xdp_size() doesn't need to be updated. Note that the installation side is still not there, since all drivers currently reject installing more than one program at the time. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jakub Kicinski
authored and
Daniel Borkmann
commited |
a25717d2b6 | |
prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jakub Kicinski
authored and
Daniel Borkmann
commited |
6b86758973 | |
For most of these calls we can just pass NULL through to the fallback function as the sb_dev. The only cases where we cannot are the cases where we might be dealing with either an upper device or a driver that would have configured things to support an sb_dev itself. The only driver that has any significant change in this patch set should be ixgbe as we can drop the redundant functionality that existed in both the ndo_select_queue function and the fallback function that was passed through to us. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> 
Alexander Duyck
authored and
 Jeff Kirsher
commited |
8ec56fc3c5 | |
This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck
authored and
Jeff Kirsher
commited |
4f49dec907 | |
This patch adds a generic version of the ndo_select_queue functions for either returning 0 or selecting a queue based on the processor ID. This is generally meant to just reduce the number of functions we have to change in the future when we have to deal with ndo_select_queue changes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck
authored and
Jeff Kirsher
commited |
a4ea8a3dac | |
This change makes it so that we can support the concept of subordinate device traffic classes to the core networking code. In doing this we can start pulling out the driver specific bits needed to support selecting a queue based on an upper device. The solution at is currently stands is only partially implemented. I have the start of some XPS bits in here, but I would still need to allow for configuration of the XPS maps on the queues reserved for the subordinate devices. For now I am using the reference to the sb_dev XPS map as just a way to skip the lookup of the lower device XPS map for now as that would result in the wrong queue being picked. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck
authored and
Jeff Kirsher
commited |
eadec877ce | |
This patch is meant to provide the basic tools needed to allow us to create subordinate device traffic classes. The general idea here is to allow subdividing the queues of a device into queue groups accessible through an upper device such as a macvlan. The idea here is to enforce the idea that an upper device has to be a single queue device, ideally with IFF_NO_QUQUE set. With that being the case we can pretty much guarantee that the tc_to_txq mappings and XPS maps for the upper device are unused. As such we could reuse those in order to support subdividing the lower device and distributing those queues between the subordinate devices. In order to distinguish between a regular set of traffic classes and if a device is carrying subordinate traffic classes I changed num_tc from a u8 to a s16 value and use the negative values to represent the subordinate pool values. So starting at -1 and running to -32768 we can encode those as pool values, and the existing values of 0 to 15 can be maintained. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Alexander Duyck
authored and
Jeff Kirsher
commited |
ffcfe25bb5 | |
After commit
Li RongQing
authored and
David S. Miller
commited |
6312fe7775 | |
The ETF (Earliest TxTime First) qdisc uses the information added
earlier in this series (the socket option SO_TXTIME and the new
role of sk_buff->tstamp) to schedule packets transmission based
on absolute time.
For some workloads, just bandwidth enforcement is not enough, and
precise control of the transmission of packets is necessary.
Example:
$ tc qdisc replace dev enp2s0 parent root handle 100 mqprio num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 queues 1@0 1@1 2@2 hw 0
$ tc qdisc add dev enp2s0 parent 100:1 etf delta 100000 \
clockid CLOCK_TAI
In this example, the Qdisc will provide SW best-effort for the control
of the transmission time to the network adapter, the time stamp in the
socket will be in reference to the clockid CLOCK_TAI and packets
will leave the qdisc "delta" (100000) nanoseconds before its transmission
time.
The ETF qdisc will buffer packets sorted by their txtime. It will drop
packets on enqueue() if their skbuff clockid does not match the clock
reference of the Qdisc. Moreover, on dequeue(), a packet will be dropped
if it expires while being enqueued.
The qdisc also supports the SO_TXTIME deadline mode. For this mode, it
will dequeue a packet as soon as possible and change the skb timestamp
to 'now' during etf_dequeue().
Note that both the qdisc's and the SO_TXTIME ABIs allow for a clockid
to be configured, but it's been decided that usage of CLOCK_TAI should
be enforced until we decide to allow for other clockids to be used.
The rationale here is that PTP times are usually in the TAI scale, thus
no other clocks should be necessary. For now, the qdisc will return
EINVAL if any clocks other than CLOCK_TAI are used.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vinicius Costa Gomes
authored and
David S. Miller
commited |
25db26a913 | |
Also involved adding a way to run a netfilter hook over a list of packets. Rather than attempting to make netfilter know about lists (which would be a major project in itself) we just let it call the regular okfn (in this case ip_rcv_finish()) for any packets it steals, and have it give us back a list of packets it's synchronously accepted (which normally NF_HOOK would automatically call okfn() on, but we want to be able to potentially pass the list to a listified version of okfn().) The netfilter hooks themselves are indirect calls that still happen per- packet (see nf_hook_entry_hookfn()), but again, changing that can be left for future work. There is potential for out-of-order receives if the netfilter hook ends up synchronously stealing packets, as they will be processed before any accepts earlier in the list. However, it was already possible for an asynchronous accept to cause out-of-order receives, so presumably this is considered OK. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Edward Cree
authored and
David S. Miller
commited |
17266ee939 | |
Just calls netif_receive_skb() in a loop. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Edward Cree
authored and
David S. Miller
commited |
f6ad8c1bcd | |
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
commited |
5cd3da4ba2 | |
Since the addition of GRO for ESP, gro_receive can consume the skb and return -EINPROGRESS. In that case, the lower layer GRO handler cannot touch the skb anymore. Commit
Sabrina Dubroca
authored and
David S. Miller
commited |
603d4cf8fe | |
Refactor XPS code to support Tx queue selection based on CPU(s) map or Rx queue(s) map. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Amritha Nambiar
authored and
David S. Miller
commited |
80d19669ec | |
Improve the performance of GRO receive by splitting flows into multiple hash chains. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller
authored and
David S. Miller
commited |
07d78363dc | |
Manage pending per-NAPI GRO packets via list_head. Return an SKB pointer from the GRO receive handlers. When GRO receive handlers return non-NULL, it means that this SKB needs to be completed at this time and removed from the NAPI queue. Several operations are greatly simplified by this transformation, especially timing out the oldest SKB in the list when gro_count exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue in reverse order. Signed-off-by: David S. Miller <davem@davemloft.net>
David Miller
authored and
David S. Miller
commited |
d4546c2509 | |
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-06-05
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add a new BPF hook for sendmsg similar to existing hooks for bind and
connect: "This allows to override source IP (including the case when it's
set via cmsg(3)) and destination IP:port for unconnected UDP (slow path).
TCP and connected UDP (fast path) are not affected. This makes UDP support
complete, that is, connected UDP is handled by connect hooks, unconnected
by sendmsg ones.", from Andrey.
2) Rework of the AF_XDP API to allow extending it in future for type writer
model if necessary. In this mode a memory window is passed to hardware
and multiple frames might be filled into that window instead of just one
that is the case in the current fixed frame-size model. With the new
changes made this can be supported without having to add a new descriptor
format. Also, core bits for the zero-copy support for AF_XDP have been
merged as agreed upon, where i40e bits will be routed via Jeff later on.
Various improvements to documentation and sample programs included as
well, all from Björn and Magnus.
3) Given BPF's flexibility, a new program type has been added to implement
infrared decoders. Quote: "The kernel IR decoders support the most
widely used IR protocols, but there are many protocols which are not
supported. [...] There is a 'long tail' of unsupported IR protocols,
for which lircd is need to decode the IR. IR encoding is done in such
a way that some simple circuit can decode it; therefore, BPF is ideal.
[...] user-space can define a decoder in BPF, attach it to the rc
device through the lirc chardev.", from Sean.
4) Several improvements and fixes to BPF core, among others, dumping map
and prog IDs into fdinfo which is a straight forward way to correlate
BPF objects used by applications, removing an indirect call and therefore
retpoline in all map lookup/update/delete calls by invoking the callback
directly for 64 bit archs, adding a new bpf_skb_cgroup_id() BPF helper
for tc BPF programs to have an efficient way of looking up cgroup v2 id
for policy or other use cases. Fixes to make sure we zero tunnel/xfrm
state that hasn't been filled, to allow context access wrt pt_regs in
32 bit archs for tracing, and last but not least various test cases
for fixes that landed in bpf earlier, from Daniel.
5) Get rid of the ndo_xdp_flush API and extend the ndo_xdp_xmit with
a XDP_XMIT_FLUSH flag instead which allows to avoid one indirect
call as flushing is now merged directly into ndo_xdp_xmit(), from Jesper.
6) Add a new bpf_get_current_cgroup_id() helper that can be used in
tracing to retrieve the cgroup id from the current process in order
to allow for e.g. aggregation of container-level events, from Yonghong.
7) Two follow-up fixes for BTF to reject invalid input values and
related to that also two test cases for BPF kselftests, from Martin.
8) Various API improvements to the bpf_fib_lookup() helper, that is,
dropping MPLS bits which are not fully hashed out yet, rejecting
invalid helper flags, returning error for unsupported address
families as well as renaming flowlabel to flowinfo, from David.
9) Various fixes and improvements to sockmap BPF kselftests in particular
in proper error detection and data verification, from Prashant.
10) Two arm32 BPF JIT improvements. One is to fix imm range check with
regards to whether immediate fits into 24 bits, and a naming cleanup
to get functions related to rsh handling consistent to those handling
lsh, from Wang.
11) Two compile warning fixes in BPF, one for BTF and a false positive
to silent gcc in stack_map_get_build_id_offset(), from Arnd.
12) Add missing seg6.h header into tools include infrastructure in order
to fix compilation of BPF kselftests, from Mathieu.
13) Several formatting cleanups in the BPF UAPI helper description that
also fix an error during rst2man compilation, from Quentin.
14) Hide an unused variable in sk_msg_convert_ctx_access() when IPv6 is
not built into the kernel, from Yue.
15) Remove a useless double assignment in dev_map_enqueue(), from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
commited |
fd129f8941 | |
Added ndo_xsk_async_xmit. This ndo "kicks" the netdev to start to pull userland AF_XDP Tx frames from a NAPI context. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 
Magnus Karlsson
authored and
Daniel Borkmann
commited |
e3760c7e50 | |
Extend ndo_bpf with two new commands used for query zero-copy support and register an UMEM to a queue_id of a netdev. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 
Björn Töpel
authored and
Daniel Borkmann
commited |
74515c5750 | |
All drivers are cleaned up and no references to ndo_xdp_flush are left in drivers, it is time to remove the net_device_ops operation ndo_xdp_flush. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> 
Jesper Dangaard Brouer
authored and
Daniel Borkmann
commited |
189454e868 | |
This patch only change the API and reject any use of flags. This is an intermediate step that allows us to implement the flush flag operation later, for each individual driver in a separate patch. The plan is to implement flush operation via XDP_XMIT_FLUSH flag and then remove XDP_XMIT_FLAGS_NONE when done. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jesper Dangaard Brouer
authored and
 Alexei Starovoitov
commited |
42b3346898 | |
mq offload is trivial, we just need to let the device know that the root qdisc is mq. Alternative approach would be to export qdisc_lookup() and make drivers check the root type themselves, but notification via ndo_setup_tc is more in line with other qdiscs. Note that mq doesn't hold any stats on it's own, it just adds up stats of its children. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski
authored and
David S. Miller
commited |
f971b13230 | |
The failover module provides a generic interface for paravirtual drivers to register a netdev and a set of ops with a failover instance. The ops are used as event handlers that get called to handle netdev register/ unregister/link change/name change events on slave pci ethernet devices with the same mac address as the failover netdev. This enables paravirtual drivers to use a VF as an accelerated low latency datapath. It also allows migration of VMs with direct attached VFs by failing over to the paravirtual datapath when the VF is unplugged. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Sridhar Samudrala
authored and
David S. Miller
commited |
30c8bd5aa8 | |
LAG upper event notifiers contain the tx type used by the LAG device. Extend this to also include the hash policy used for tx types that utilize hashing. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
John Hurley
authored and
David S. Miller
commited |
f44aa9ef79 | |
This patch change the API for ndo_xdp_xmit to support bulking xdp_frames. When kernel is compiled with CONFIG_RETPOLINE, XDP sees a huge slowdown. Most of the slowdown is caused by DMA API indirect function calls, but also the net_device->ndo_xdp_xmit() call. Benchmarked patch with CONFIG_RETPOLINE, using xdp_redirect_map with single flow/core test (CPU E5-1650 v4 @ 3.60GHz), showed performance improved: for driver ixgbe: 6,042,682 pps -> 6,853,768 pps = +811,086 pps for driver i40e : 6,187,169 pps -> 6,724,519 pps = +537,350 pps With frames avail as a bulk inside the driver ndo_xdp_xmit call, further optimizations are possible, like bulk DMA-mapping for TX. Testing without CONFIG_RETPOLINE show the same performance for physical NIC drivers. The virtual NIC driver tun sees a huge performance boost, as it can avoid doing per frame producer locking, but instead amortize the locking cost over the bulk. V2: Fix compile errors reported by kbuild test robot <lkp@intel.com> V4: Isolated ndo, driver changes and callers. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jesper Dangaard Brouer
authored and
Alexei Starovoitov
commited |
735fc4054b | |
Minor conflict, a CHECK was placed into an if() statement in net-next, whilst a newline was added to that CHECK call in 'net'. Thanks to Daniel for the merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
commited |
01adc4851a | |
The new dev_direct_xmit will be used by AF_XDP in later commits. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Magnus Karlsson
authored and
Alexei Starovoitov
commited |
865b03f211 | |
We do not require this inline function to be used in multiple different locations, just inline it where it gets used in register_netdevice(). Suggested-by: David Miller <davem@davemloft.net> Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Florian Fainelli
authored and
David S. Miller
commited |
e283de3a4f | |
Add new netdev ops to add and delete tls context Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Ilya Lesokhin
authored and
David S. Miller
commited |
a5c37c63f7 | |
We have about 53 netdev_features_t bits defined and counting, add a build time check to catch when an u64 type will not be enough and we will have to convert that to a bitmap. This is done in register_netdevice() for convenience. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli
authored and
David S. Miller
commited |
3ac305c386 | |
I am dropping the export of __skb_tx_hash as after my patches nobody is using it outside of the net/core/dev.c file. In addition I am renaming and repurposing it to just be a static declaration of skb_tx_hash since that was the only user for it at this point. By doing this the compiler can inline it into __netdev_pick_tx as that will improve performance. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck
authored and
David S. Miller
commited |
1b837d489e | |
Virtual devices such as tunnels and bonding can handle large packets. Only segment packets when reaching a physical or loopback device. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Willem de Bruijn
authored and
David S. Miller
commited |
83aa025f53 | |
Changing API ndo_xdp_xmit to take a struct xdp_frame instead of struct xdp_buff. This brings xdp_return_frame and ndp_xdp_xmit in sync. This builds towards changing the API further to become a bulk API, because xdp_buff is not a queue-able object while xdp_frame is. V4: Adjust for commit
Jesper Dangaard Brouer
authored and
David S. Miller
commited |
44fa2dbd47 | |
Provide a pointer to the SFP bus in struct net_device, so that the ethtool module EEPROM methods can access the SFP directly, rather than needing every user to provide a hook for it. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Russell King
authored and
David S. Miller
commited |
e679c9c1db | |
NETIF_F_HW_VLAN_[CS]TAG_FILTER features require more than just a bit flip in dev->features in order to keep the driver in a consistent state. These features notify the driver of each added/removed vlan, but toggling of vlan-filter does not notify the driver accordingly for each of the existing vlans. This patch implements a similar solution to NETIF_F_RX_UDP_TUNNEL_PORT behavior (which notifies the driver about UDP ports in the same manner that vids are reported). Each toggling of the features propagates to the 8021q module, which iterates over the vlans and call add/kill ndo accordingly. Signed-off-by: Gal Pressman <galp@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Gal Pressman
authored and
David S. Miller
commited |
9daae9bd47 | |
Last user is gone after
Kirill Tkhai
authored and
David S. Miller
commited |
070f2d7e26 |