mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-20 14:48:14 +07:00
| SHA1 | ||
|---|---|---|
Pull percpu updates from Tejun Heo:
"A lot of activities on percpu front. Notable changes are...
- percpu allocator now can take @gfp. If @gfp doesn't contain
GFP_KERNEL, it tries to allocate from what's already available to
the allocator and a work item tries to keep the reserve around
certain level so that these atomic allocations usually succeed.
This will replace the ad-hoc percpu memory pool used by
blk-throttle and also be used by the planned blkcg support for
writeback IOs.
Please note that I noticed a bug in how @gfp is interpreted while
preparing this pull request and applied the fix
Linus Torvalds
commited |
c798360cd1 | |
Pull cgroup updates from Tejun Heo: "Nothing too interesting. Just a handful of cleanup patches" * 'for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Revert "cgroup: remove redundant variable in cgroup_mount()" cgroup: remove redundant variable in cgroup_mount() cgroup: fix missing unlock in cgroup_release_agent() cgroup: remove CGRP_RELEASABLE flag perf/cgroup: Remove perf_put_cgroup() cgroup: remove redundant check in cgroup_ino() cpuset: simplify proc_cpuset_show() cgroup: simplify proc_cgroup_show() cgroup: use a per-cgroup work for release agent cgroup: remove bogus comments cgroup: remove redundant code in cgroup_rmdir() cgroup: remove some useless forward declarations cgroup: fix a typo in comment.
Linus Torvalds
commited |
b211e9d7c8 | |
This reverts commit
Zefan Li
authored and
 Tejun Heo
commited |
e756c7b698 | |
With the recent addition of percpu_ref_reinit(), percpu_ref now can be used as a persistent switch which can be turned on and off repeatedly where turning off maps to killing the ref and waiting for it to drain; however, there currently isn't a way to initialize a percpu_ref in its off (killed and drained) state, which can be inconvenient for certain persistent switch use cases. Similarly, percpu_ref_switch_to_atomic/percpu() allow dynamic selection of operation mode; however, currently a newly initialized percpu_ref is always in percpu mode making it impossible to avoid the latency overhead of switching to atomic mode. This patch adds @flags to percpu_ref_init() and implements the following flags. * PERCPU_REF_INIT_ATOMIC : start ref in atomic mode * PERCPU_REF_INIT_DEAD : start ref killed and drained These flags should be able to serve the above two use cases. v2: target_core_tpg.c conversion was missing. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo
commited |
2aad2a86f6 | |
This is to receive
Tejun Heo
commited |
d06efebf0c | |
Both pinned_sb and new_sb indicate if a new superblock is needed, so we can just remove new_sb. Note now we must check if kernfs_tryget_sb() returns NULL, because when it returns NULL, kernfs_mount() may still re-use an existing superblock, which is just allocated by another concurent mount. Suggested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Zefan Li
authored and
Tejun Heo
commited |
0c7bf3e8ca | |
The patch
Zefan Li
authored and
Tejun Heo
commited |
3e2cd91ab9 | |
We call put_css_set() after setting CGRP_RELEASABLE flag in cgroup_task_migrate(), but in other places we call it without setting the flag. I don't see the necessity of this flag. Moreover once the flag is set, it will never be cleared, unless writing to the notify_on_release control file, so it can be quite confusing if we look at the output of debug.releasable. # mount -t cgroup -o debug xxx /cgroup # mkdir /cgroup/child # cat /cgroup/child/debug.releasable 0 <-- shows 0 though the cgroup is empty # echo $$ > /cgroup/child/tasks # cat /cgroup/child/debug.releasable 0 # echo $$ > /cgroup/tasks && echo $$ > /cgroup/child/tasks # cat /proc/child/debug.releasable 1 <-- shows 1 though the cgroup is not empty This patch removes the flag, and now debug.releasable shows if the cgroup is empty or not. Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Zefan Li
authored and
Tejun Heo
commited |
a25eb52e81 | |
Use the ONE macro instead of REG, and we can simplify proc_cgroup_show(). Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Zefan Li
authored and
Tejun Heo
commited |
006f4ac497 | |
Instead of using a global work to schedule release agent on removable cgroups, we change to use a per-cgroup work to do this, which makes the code much simpler. v2: use a dedicated work instead of reusing css->destroy_work. (Tejun) Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Zefan Li
authored and
Tejun Heo
commited |
971ff49355 | |
cgroup_pidlist_start() holds cgrp->pidlist_mutex and then calls
pidlist_array_load(), and cgroup_pidlist_stop() releases the mutex.
It is wrong that we release the mutex in the failure path in
pidlist_array_load(), because cgroup_pidlist_stop() will be called
no matter if cgroup_pidlist_start() returns errno or not.
Fixes:
Zefan Li
authored and
Tejun Heo
commited |
eb4aec84d6 | |
We never grab cgroup mutex in fork and exit paths no matter whether notify_on_release is set or not. Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
0c8fc2c121 | |
We no longer clear kn->priv in cgroup_rmdir(), so we don't need to get an extra refcnt. Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
244bb9a633 | |
Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
6213daab25 | |
Pull to receive
Tejun Heo
commited |
9253b279f4 | |
Percpu allocator now supports allocation mask. Add @gfp to percpu_ref_init() so that !GFP_KERNEL allocation masks can be used with percpu_refs too. This patch doesn't make any functional difference. v2: blk-mq conversion was missing. Updated. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kent Overstreet <koverstreet@google.com> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Jens Axboe <axboe@kernel.dk>
Tejun Heo
commited |
a34375ef9e | |
When cgroup_kn_lock_live() is called through some kernfs operation and another thread is calling cgroup_rmdir(), we'll trigger the warning in cgroup_get(). ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1228 at kernel/cgroup.c:1034 cgroup_get+0x89/0xa0() ... Call Trace: [<c16ee73d>] dump_stack+0x41/0x52 [<c10468ef>] warn_slowpath_common+0x7f/0xa0 [<c104692d>] warn_slowpath_null+0x1d/0x20 [<c10bb999>] cgroup_get+0x89/0xa0 [<c10bbe58>] cgroup_kn_lock_live+0x28/0x70 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230 [<c10be5b2>] cgroup_tasks_write+0x12/0x20 [<c10bb7b0>] cgroup_file_write+0x40/0x130 [<c11aee71>] kernfs_fop_write+0xd1/0x160 [<c1148e58>] vfs_write+0x98/0x1e0 [<c114934d>] SyS_write+0x4d/0xa0 [<c16f656b>] sysenter_do_call+0x12/0x12 ---[ end trace 6f2e0c38c2108a74 ]--- Fix this by calling css_tryget() instead of cgroup_get(). v2: - move cgroup_tryget() right below cgroup_get() definition. (Tejun) Cc: <stable@vger.kernel.org> # 3.15+ Reported-by: Toralf Förster <toralf.foerster@gmx.de> Signed-off-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
aa32362f01 | |
Run these two scripts concurrently:
for ((; ;))
{
mkdir /cgroup/sub
rmdir /cgroup/sub
}
for ((; ;))
{
echo $$ > /cgroup/sub/cgroup.procs
echo $$ > /cgroup/cgroup.procs
}
A kernel bug will be triggered:
BUG: unable to handle kernel NULL pointer dereference at 00000038
IP: [<c10bbd69>] cgroup_put+0x9/0x80
...
Call Trace:
[<c10bbe19>] cgroup_kn_unlock+0x39/0x50
[<c10bbe91>] cgroup_kn_lock_live+0x61/0x70
[<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230
[<c10be5b2>] cgroup_tasks_write+0x12/0x20
[<c10bb7b0>] cgroup_file_write+0x40/0x130
[<c11aee71>] kernfs_fop_write+0xd1/0x160
[<c1148e58>] vfs_write+0x98/0x1e0
[<c114934d>] SyS_write+0x4d/0xa0
[<c16f656b>] sysenter_do_call+0x12/0x12
We clear cgrp->kn->priv in the end of cgroup_rmdir(), but another
concurrent thread can access kn->priv after the clearing.
We should move the clearing to css_release_work_fn(). At that time
no one is holding reference to the cgroup and no one can gain a new
reference to access it.
v2:
- move RCU_INIT_POINTER() into the else block. (Tejun)
- remove the cgroup_parent() check. (Tejun)
- update the comment in css_tryget_online_from_dir().
Cc: <stable@vger.kernel.org> # 3.15+
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
a4189487da | |
There is no function named cgroup_enable_task_cg_links(). Instead, the correct function name in this comment should be cgroup_enabled_task_cg_lists(). Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> 
Dongsheng Yang
authored and
Tejun Heo
commited |
251f8c0364 | |
Kernel command line parameter cgroup__DEVEL__legacy_files_on_dfl forces legacy cgroup files to show up on default hierarhcy if susbsystem does not have any files defined for default hierarchy. But this seems to be working only if legacy files are defined in ss->legacy_cftypes. If one adds some cftypes later using cgroup_add_legacy_cftypes(), these files don't show up on default hierarchy. Update the function accordingly so that the dynamically added legacy files also show up in the default hierarchy if the target subsystem is also using the base legacy files for the default hierarchy. tj: Patch description and comment updates. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> 
Vivek Goyal
authored and
Tejun Heo
commited |
fa8137be6b | |
/proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely. Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org 
Alban Crequy
authored and
Tejun Heo
commited |
71b1fb5c44 | |
Pull cgroup changes from Tejun Heo:
"Mostly changes to get the v2 interface ready. The core features are
mostly ready now and I think it's reasonable to expect to drop the
devel mask in one or two devel cycles at least for a subset of
controllers.
- cgroup added a controller dependency mechanism so that block cgroup
can depend on memory cgroup. This will be used to finally support
IO provisioning on the writeback traffic, which is currently being
implemented.
- The v2 interface now uses a separate table so that the interface
files for the new interface are explicitly declared in one place.
Each controller will explicitly review and add the files for the
new interface.
- cpuset is getting ready for the hierarchical behavior which is in
the similar style with other controllers so that an ancestor's
configuration change doesn't change the descendants' configurations
irreversibly and processes aren't silently migrated when a CPU or
node goes down.
All the changes are to the new interface and no behavior changed for
the multiple hierarchies"
* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (29 commits)
cpuset: fix the WARN_ON() in update_nodemasks_hier()
cgroup: initialize cgrp_dfl_root_inhibit_ss_mask from !->dfl_files test
cgroup: make CFTYPE_ONLY_ON_DFL and CFTYPE_NO_ internal to cgroup core
cgroup: distinguish the default and legacy hierarchies when handling cftypes
cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
cgroup: split cgroup_base_files[] into cgroup_{dfl|legacy}_base_files[]
cpuset: export effective masks to userspace
cpuset: allow writing offlined masks to cpuset.cpus/mems
cpuset: enable onlined cpu/node in effective masks
cpuset: refactor cpuset_hotplug_update_tasks()
cpuset: make cs->{cpus, mems}_allowed as user-configured masks
cpuset: apply cs->effective_{cpus,mems}
cpuset: initialize top_cpuset's configured masks at mount
cpuset: use effective cpumask to build sched domains
cpuset: inherit ancestor's masks if effective_{cpus, mems} becomes empty
cpuset: update cs->effective_{cpus, mems} when config changes
cpuset: update cpuset->effective_{cpus,mems} at hotplug
cpuset: add cs->effective_cpus and cs->effective_mems
cgroup: clean up sane_behavior handling
...
Linus Torvalds
commited |
47dfe4037e | |
Pull percpu updates from Tejun Heo:
- Major reorganization of percpu header files which I think makes
things a lot more readable and logical than before.
- percpu-refcount is updated so that it requires explicit destruction
and can be reinitialized if necessary. This was pulled into the
block tree to replace the custom percpu refcnting implemented in
blk-mq.
- In the process, percpu and percpu-refcount got cleaned up a bit
* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (21 commits)
percpu-refcount: implement percpu_ref_reinit() and percpu_ref_is_zero()
percpu-refcount: require percpu_ref to be exited explicitly
percpu-refcount: use unsigned long for pcpu_count pointer
percpu-refcount: add helpers for ->percpu_count accesses
percpu-refcount: one bit is enough for REF_STATUS
percpu-refcount, aio: use percpu_ref_cancel_init() in ioctx_alloc()
workqueue: stronger test in process_one_work()
workqueue: clear POOL_DISASSOCIATED in rebind_workers()
percpu: Use ALIGN macro instead of hand coding alignment calculation
percpu: invoke __verify_pcpu_ptr() from the generic part of accessors and operations
percpu: preffity percpu header files
percpu: use raw_cpu_*() to define __this_cpu_*()
percpu: reorder macros in percpu header files
percpu: move {raw|this}_cpu_*() definitions to include/linux/percpu-defs.h
percpu: move generic {raw|this}_cpu_*_N() definitions to include/asm-generic/percpu.h
percpu: only allow sized arch overrides for {raw|this}_cpu_*() ops
percpu: reorganize include/linux/percpu-defs.h
percpu: move accessors from include/linux/percpu.h to percpu-defs.h
percpu: include/asm-generic/percpu.h should contain only arch-overridable parts
percpu: introduce arch_raw_cpu_ptr()
...
Linus Torvalds
commited |
f2a84170ed | |
cgrp_dfl_root_inhibit_ss_mask determines which subsystems are not supported on the default hierarchy and is currently initialized statically and just includes the debug subsystem. Now that there's cgroup_subsys->dfl_files, we can easily tell which subsystems support the default hierarchy or not. Let's initialize cgrp_dfl_root_inhibit_ss_mask by testing whether cgroup_subsys->dfl_files is NULL. After all, subsystems with NULL ->dfl_files aren't useable on the default hierarchy anyway. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
5de4fa13c4 | |
cgroup now distinguishes cftypes for the default and legacy
hierarchies more explicitly by using separate arrays and
CFTYPE_ONLY_ON_DFL and CFTYPE_INSANE should be and are used only
inside cgroup core proper. Let's make it clear that the flags are
internal by prefixing them with double underscores.
CFTYPE_INSANE is renamed to __CFTYPE_NOT_ON_DFL for consistency. The
two flags are also collected and assigned bits >= 16 so that they
aren't mixed with the published flags.
v2: Convert the extra ones in cgroup_exit_cftypes() which are added by
revision to the previous patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
05ebb6e60f | |
Until now, cftype arrays carried files for both the default and legacy
hierarchies and the files which needed to be used on only one of them
were flagged with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE. This
gets confusing very quickly and we may end up exposing interface files
to the default hierarchy without thinking it through.
This patch makes cgroup core provide separate sets of interfaces for
cftype handling so that the cftypes for the default and legacy
hierarchies are clearly distinguished. The previous two patches
renamed the existing ones so that they clearly indicate that they're
for the legacy hierarchies. This patch adds the interface for the
default hierarchy and apply them selectively depending on the
hierarchy type.
* cftypes added through cgroup_subsys->dfl_cftypes and
cgroup_add_dfl_cftypes() only show up on the default hierarchy.
* cftypes added through cgroup_subsys->legacy_cftypes and
cgroup_add_legacy_cftypes() only show up on the legacy hierarchies.
* cgroup_subsys->dfl_cftypes and ->legacy_cftypes can point to the
same array for the cases where the interface files are identical on
both types of hierarchies.
* This makes all the existing subsystem interface files legacy-only by
default and all subsystems will have no interface file created when
enabled on the default hierarchy. Each subsystem should explicitly
review and compose the interface for the default hierarchy.
* A boot param "cgroup__DEVEL__legacy_files_on_dfl" is added which
makes subsystems which haven't decided the interface files for the
default hierarchy to present the legacy files on the default
hierarchy so that its behavior on the default hierarchy can be
tested. As the awkward name suggests, this is for development only.
* memcg's CFTYPE_INSANE on "use_hierarchy" is noop now as the whole
array isn't used on the default hierarchy. The flag is removed.
v2: Updated documentation for cgroup__DEVEL__legacy_files_on_dfl.
v3: Clear CFTYPE_ONLY_ON_DFL and CFTYPE_INSANE when cfts are removed
as suggested by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Aristeu Rozanski <aris@redhat.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tejun Heo
commited |
a8ddc8215e | |
Currently, cftypes added by cgroup_add_cftypes() are used for both the unified default hierarchy and legacy ones and subsystems can mark each file with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to appear only on one of them. This is quite hairy and error-prone. Also, we may end up exposing interface files to the default hierarchy without thinking it through. cgroup_subsys will grow two separate cftype addition functions and apply each only on the hierarchies of the matching type. This will allow organizing cftypes in a lot clearer way and encourage subsystems to scrutinize the interface which is being exposed in the new default hierarchy. In preparation, this patch adds cgroup_add_legacy_cftypes() which currently is a simple wrapper around cgroup_add_cftypes() and replaces all cgroup_add_cftypes() usages with it. While at it, this patch drops a completely spurious return from __hugetlb_cgroup_file_init(). This patch doesn't introduce any functional differences. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tejun Heo
commited |
2cf669a58d | |
Currently, cgroup_subsys->base_cftypes is used for both the unified default hierarchy and legacy ones and subsystems can mark each file with either CFTYPE_ONLY_ON_DFL or CFTYPE_INSANE if it has to appear only on one of them. This is quite hairy and error-prone. Also, we may end up exposing interface files to the default hierarchy without thinking it through. cgroup_subsys will grow two separate cftype arrays and apply each only on the hierarchies of the matching type. This will allow organizing cftypes in a lot clearer way and encourage subsystems to scrutinize the interface which is being exposed in the new default hierarchy. In preparation, this patch renames cgroup_subsys->base_cftypes to cgroup_subsys->legacy_cftypes. This patch is pure rename. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Aristeu Rozanski <aris@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tejun Heo
commited |
5577964e64 | |
Currently cgroup_base_files[] contains the cgroup core interface files
for both legacy and default hierarchies with each file tagged with
CFTYPE_INSANE and CFTYPE_ONLY_ON_DFL. This is difficult to read.
Let's separate it out to two separate tables, cgroup_dfl_base_files[]
and cgroup_legacy_base_files[], and use the appropriate one in
cgroup_mkdir() depending on the hierarchy type. This makes tagging
each file unnecessary.
This patch doesn't introduce any behavior changes.
v2: cgroup_dfl_base_files[] was missing the termination entry
triggering WARN in cgroup_init_cftypes() for 0day kernel testing
robot. Fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Jet Chen <jet.chen@intel.com>
Tejun Heo
commited |
a14c6874be | |
After the previous patch to remove sane_behavior support from non-default hierarchies, CGRP_ROOT_SANE_BEHAVIOR is used only to indicate the default hierarchy while parsing mount options. This patch makes the following cleanups around it. * Don't show it in the mount option. Eventually the default hierarchy will be assigned a different filesystem type. * As sane_behavior is no longer effective on non-default hierarchies and the default hierarchy doesn't accept any mount options, parse_cgroupfs_options() can consider sane_behavior mount option as indicating the default hierarchy and fail if any other options are specified with it. While at it, remove one of the double blank lines in the function. * cgroup_mount() can now simply test CGRP_ROOT_SANE_BEHAVIOR to tell whether to mount the default hierarchy or not. * As CGROUP_ROOT_SANE_BEHAVIOR's only role now is indicating whether to select the default hierarchy or not during mount, it doesn't need to be set in the default hierarchy itself. cgroup_init_early() updated accordingly. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
7b9a6ba56e | |
sane_behavior has been used as a development vehicle for the default unified hierarchy. Now that the default hierarchy is in place, the flag became redundant and confusing as its usage is allowed on all hierarchies. There are gonna be either the default hierarchy or legacy ones. Let's make that clear by removing sane_behavior support on non-default hierarchies. This patch replaces cgroup_sane_behavior() with cgroup_on_dfl(). The comment on top of CGRP_ROOT_SANE_BEHAVIOR is moved to on top of cgroup_on_dfl() with sane_behavior specific part dropped. On the default and legacy hierarchies w/o sane_behavior, this shouldn't cause any behavior differences. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz>
Tejun Heo
commited |
aa6ec29bee | |
"cgroup.sane_behavior" is added to help distinguishing whether sane_behavior is in effect or not. We now have the default hierarchy where the flag is always in effect and are planning to remove supporting sane behavior on the legacy hierarchies making this file on the default hierarchy rather pointless. Let's make it legacy only and thus always zero. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
c1d5d42efd | |
cgroup_root->flags only contains CGRP_ROOT_* flags and there's no reason to mask the flags. Remove CGRP_ROOT_OPTION_MASK. This doesn't cause any behavior differences. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
7450e90bbb | |
Currently, the blkio subsystem attributes all of writeback IOs to the root. One of the issues is that there's no way to tell who originated a writeback IO from block layer. Those IOs are usually issued asynchronously from a task which didn't have anything to do with actually generating the dirty pages. The memory subsystem, when enabled, already keeps track of the ownership of each dirty page and it's desirable for blkio to piggyback instead of adding its own per-page tag. blkio piggybacking on memory is an implementation detail which preferably should be handled automatically without requiring explicit userland action. To achieve that, this patch implements cgroup_subsys->depends_on which contains the mask of subsystems which should be enabled together when the subsystem is enabled. The previous patches already implemented the support for enabled but invisible subsystems and cgroup_subsys->depends_on can be easily implemented by updating cgroup_refresh_child_subsys_mask() so that it calculates cgroup->child_subsys_mask considering cgroup_subsys->depends_on of the explicitly enabled subsystems. Documentation/cgroups/unified-hierarchy.txt is updated to explain that subsystems may not become immediately available after being unused from userland and that dependency could be a factor in it. As subsystems may already keep residual references, this doesn't significantly change how subsystem rebinding can be used. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo
commited |
af0ba6789c | |
cgroup is implementing support for subsystem dependency which would require a way to enable a subsystem even when it's not directly configured through "cgroup.subtree_control". The previous patches added support for explicitly and implicitly enabled subsystems and showing/hiding their interface files. An explicitly enabled subsystem may become implicitly enabled if it's turned off through "cgroup.subtree_control" but there are subsystems depending on it. In such cases, the subsystem, as it's turned off when seen from userland, shouldn't enforce any resource control. Also, the subsystem may be explicitly turned on later again and its interface files should be as close to the intial state as possible. This patch adds cgroup_subsys->css_reset() which is invoked when a css is hidden. The callback should disable resource control and reset the state to the vanilla state. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo
commited |
b4536f0cab | |
cgroup is implementing support for subsystem dependency which would require a way to enable a subsystem even when it's not directly configured through "cgroup.subtree_control". The preceding patch distinguished cgroup->subtree_control and ->child_subsys_mask where the former is the subsystems explicitly configured by the userland and the latter is all enabled subsystems currently is equal to the former but will include subsystems implicitly enabled through dependency. Subsystems which are enabled due to dependency shouldn't be visible to userland. This patch updates cgroup_subtree_control_write() and create_css() such that interface files are not created for implicitly enabled subsytems. * @visible paramter is added to create_css(). Interface files are created only when true. * If an already implicitly enabled subsystem is turned on through "cgroup.subtree_control", the existing css should be used. css draining is skipped. * cgroup_subtree_control_write() computes the new target cgroup->child_subsys_mask and create/kill or show/hide csses accordingly. As the two subsystem masks are still kept identical, this patch doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo
commited |
f63070d350 | |
cgroup is implementing support for subsystem dependency which would require a way to enable a subsystem even when it's not directly configured through "cgroup.subtree_control". Previously, cgroup->child_subsys_mask directly reflected "cgroup.subtree_control" and the enabled subsystems in the child cgroups. This patch adds cgroup->subtree_control which "cgroup.subtree_control" operates on. cgroup->child_subsys_mask is now calculated from cgroup->subtree_control by cgroup_refresh_child_subsys_mask(), which sets it identical to cgroup->subtree_control for now. This will allow using cgroup->child_subsys_mask for all the enabled subsystems including the implicit ones and ->subtree_control for tracking the explicitly requested ones. This patch keeps the two masks identical and doesn't introduce any behavior changes. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo
commited |
667c249171 | |
Make the following two reorganizations to cgroup_subtree_control_write(). These are to prepare for future changes and shouldn't cause any functional difference. * Move availability above css offlining wait. * Move cgrp->child_subsys_mask update above new css creation. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo
commited |
c29adf24e0 | |
We've converted cgroup to kernfs so cgroup won't be intertwined with
vfs objects and locking, but there are dark areas.
Run two instances of this script concurrently:
for ((; ;))
{
mount -t cgroup -o cpuacct xxx /cgroup
umount /cgroup
}
After a while, I saw two mount processes were stuck at retrying, because
they were waiting for a subsystem to become free, but the root associated
with this subsystem never got freed.
This can happen, if thread A is in the process of killing superblock but
hasn't called percpu_ref_kill(), and at this time thread B is mounting
the same cgroup root and finds the root in the root list and performs
percpu_ref_try_get().
To fix this, we try to increase both the refcnt of the superblock and the
percpu refcnt of cgroup root.
v2:
- we should try to get both the superblock refcnt and cgroup_root refcnt,
because cgroup_root may have no superblock assosiated with it.
- adjust/add comments.
tj: Updated comments. Renamed @sb to @pinned_sb.
Cc: <stable@vger.kernel.org> # 3.15
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
3a32bd72d7 | |
# cat test.sh #! /bin/bash mount -t cgroup -o cpu xxx /cgroup umount /cgroup mount -t cgroup -o cpu,cpuacct xxx /cgroup umount /cgroup # ./test.sh mount: xxx already mounted or /cgroup busy mount: according to mtab, xxx is already mounted on /cgroup It's because the cgroupfs_root of the first mount was under destruction asynchronously. Fix this by delaying and then retrying mount for this case. v3: - put the refcnt immediately after getting it. (Tejun) v2: - use percpu_ref_tryget_live() rather that introducing percpu_ref_alive(). (Tejun) - adjust comment. tj: Updated the comment a bit. Cc: <stable@vger.kernel.org> # 3.15 Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
970317aa48 | |
Currently, a percpu_ref undoes percpu_ref_init() automatically by freeing the allocated percpu area when the percpu_ref is killed. While seemingly convenient, this has the following niggles. * It's impossible to re-init a released reference counter without going through re-allocation. * In the similar vein, it's impossible to initialize a percpu_ref count with static percpu variables. * We need and have an explicit destructor anyway for failure paths - percpu_ref_cancel_init(). This patch removes the automatic percpu counter freeing in percpu_ref_kill_rcu() and repurposes percpu_ref_cancel_init() into a generic destructor now named percpu_ref_exit(). percpu_ref_destroy() is considered but it gets confusing with percpu_ref_kill() while "exit" clearly indicates that it's the counterpart of percpu_ref_init(). All percpu_ref_cancel_init() users are updated to invoke percpu_ref_exit() instead and explicit percpu_ref_exit() calls are added to the destruction path of all percpu_ref users. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Benjamin LaHaise <bcrl@kvack.org> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
9a1049da9b | |
After running:
# mount -t cgroup cpu xxx /cgroup && mkdir /cgroup/sub && \
rmdir /cgroup/sub && umount /cgroup
I found the cgroup root still existed:
# cat /proc/cgroups
#subsys_name hierarchy num_cgroups enabled
cpuset 0 1 1
cpu 1 1 1
...
It turned out css_has_online_children() is broken.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Sigend-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
99bae5f941 | |
Pull cgroup updates from Tejun Heo:
"A lot of activities on cgroup side. Heavy restructuring including
locking simplification took place to improve the code base and enable
implementation of the unified hierarchy, which currently exists behind
a __DEVEL__ mount option. The core support is mostly complete but
individual controllers need further work. To explain the design and
rationales of the the unified hierarchy
Documentation/cgroups/unified-hierarchy.txt
is added.
Another notable change is css (cgroup_subsys_state - what each
controller uses to identify and interact with a cgroup) iteration
update. This is part of continuing updates on css object lifetime and
visibility. cgroup started with reference count draining on removal
way back and is now reaching a point where csses behave and are
iterated like normal refcnted objects albeit with some complexities to
allow distinguishing the state where they're being deleted. The css
iteration update isn't taken advantage of yet but is planned to be
used to simplify memcg significantly"
* 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (77 commits)
cgroup: disallow disabled controllers on the default hierarchy
cgroup: don't destroy the default root
cgroup: disallow debug controller on the default hierarchy
cgroup: clean up MAINTAINERS entries
cgroup: implement css_tryget()
device_cgroup: use css_has_online_children() instead of has_children()
cgroup: convert cgroup_has_live_children() into css_has_online_children()
cgroup: use CSS_ONLINE instead of CGRP_DEAD
cgroup: iterate cgroup_subsys_states directly
cgroup: introduce CSS_RELEASED and reduce css iteration fallback window
cgroup: move cgroup->serial_nr into cgroup_subsys_state
cgroup: link all cgroup_subsys_states in their sibling lists
cgroup: move cgroup->sibling and ->children into cgroup_subsys_state
cgroup: remove cgroup->parent
device_cgroup: remove direct access to cgroup->children
memcg: update memcg_has_children() to use css_next_child()
memcg: remove tasks/children test from mem_cgroup_force_empty()
cgroup: remove css_parent()
cgroup: skip refcnting on normal root csses and cgrp_dfl_root self css
cgroup: use cgroup->self.refcnt for cgroup refcnting
...
Linus Torvalds
commited |
14208b0ec5 | |
After booting with cgroup_disable=memory, I still saw memcg files in the default hierarchy, and I can write to them, though it won't take effect. # dmesg ... Disabling memory control group subsystem ... # mount -t cgroup -o __DEVEL__sane_behavior xxx /cgroup # ls /cgroup ... memory.failcnt memory.move_charge_at_immigrate memory.force_empty memory.numa_stat memory.limit_in_bytes memory.oom_control ... # cat /cgroup/memory.usage_in_bytes 0 tj: Minor comment update. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
c731ae1d0f | |
The default root is allocated and initialized at boot phase, so we shouldn't destroy the default root when it's umounted, otherwise it will lead to disaster. Just try mount and then umount the default root, and the kernel will crash immediately. v2: - No need to check for CSS_NO_REF in cgroup_get/put(). (Tejun) - Better call cgroup_put() for the default root in kill_sb(). (Tejun) - Add a comment. Signed-off-by: Li Zefan <lizefan@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
Li Zefan
authored and
Tejun Heo
commited |
1f779fb28a | |
There is still one residue of sysfs remaining: the sb_magic SYSFS_MAGIC. However this should be kernfs user specific, so this patch moves it out. Kerrnfs user should specify their magic number while mouting. Signed-off-by: Jianyu Zhan <nasa4836@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Jianyu Zhan
authored and
Linus Torvalds
commited |
c9482a5bdc | |
The debug controller, as its name suggests, exposes cgroup core internals to userland to aid debugging. Unfortunately, except for the name, there's no provision to prevent its usage in production configurations and the controller is widely enabled and mounted leaking internal details to userland. Like most other debug information, the information exposed by debug isn't interesting even for debugging itself once the related parts are working reliably. This controller has no reason for existing. This patch implements cgrp_dfl_root_inhibit_ss_mask which can suppress specific subsystems on the default hierarchy and adds the debug subsystem to it so that it can be gradually deprecated as usages move towards the unified hierarchy. Signed-off-by: Tejun Heo <tj@kernel.org>
Tejun Heo
commited |
5533e01144 | |
Now that cgroup liveliness and css onliness are the same state, convert cgroup_has_live_children() into css_has_online_children() so that it can be used for actual csses too. The function now uses css_for_each_child() for iteration and is published. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
f3d4650015 | |
Use CSS_ONLINE on the self css to indicate whether a cgroup has been killed instead of CGRP_DEAD. This will allow re-using css online test for cgroup liveliness test. This doesn't introduce any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com>
Tejun Heo
commited |
184faf3232 | |
Currently, css_next_child() is implemented as finding the next child cgroup which has the css enabled, which used to be the only way to do it as only cgroups participated in sibling lists and thus could be iteratd. This works as long as what's required during iteration is not missing online csses; however, it turns out that there are use cases where offlined but not yet released csses need to be iterated. This is difficult to implement through cgroup iteration the unified hierarchy as there may be multiple dying csses for the same subsystem associated with single cgroup. After the recent changes, the cgroup self and regular csses behave identically in how they're linked and unlinked from the sibling lists including assertion of CSS_RELEASED and css_next_child() can simply switch to iterating csses directly. This both simplifies the logic and ensures that all visible non-released csses are included in the iteration whether there are multiple dying csses for a subsystem or not. As all other iterators depend on css_next_child() for sibling iteration, this changes behaviors of all css iterators. Add and update explanations on the css states which are included in traversal to all iterators. As css iteration could always contain offlined csses, this shouldn't break any of the current users and new usages which need iteration of all on and offline csses can make use of the new semantics. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org>
Tejun Heo
commited |
c2931b70a3 |