mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-22 10:18:10 +07:00
| Message | SHA1 | |
|---|---|---|
net: fs_enet: Remove non NAPI RX
In the probe function, use_napi is inconditionnaly set to 1. This patch removes all the code which is conditional to !use_napi, and removes use_napi which has then become useless. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: David S. Miller <davem@davemloft.net> |
583d4a6885 | |
Merge tag 'f2fs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim: "This patch-set introduces a couple of new features such as large sector size, FITRIM, and atomic/volatile writes. Several patches enhance power-off recovery and checkpoint routines. The fsck.f2fs starts to support fixing corrupted partitions with recovery hints provided by this patch-set. Summary: - retain some recovery information for fsck.f2fs - enhance checkpoint speed - enhance flush command management - bug fix for lseek - tune in-place-update policies - enhance roll-forward speed - revisit all the roll-forward and fsync rules - support larget sector size - support FITRIM - support atomic and volatile writes And several clean-ups and bug fixes are included" * tag 'f2fs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits) f2fs: support volatile operations for transient data f2fs: support atomic writes f2fs: remove unused return value f2fs: clean up f2fs_ioctl functions f2fs: potential shift wrapping buf in f2fs_trim_fs() f2fs: call f2fs_unlock_op after error was handled f2fs: check the use of macros on block counts and addresses f2fs: refactor flush_nat_entries to remove costly reorganizing ops f2fs: introduce FITRIM in f2fs_ioctl f2fs: introduce cp_control structure f2fs: use more free segments until SSR is activated f2fs: change the ipu_policy option to enable combinations f2fs: fix to search whole dirty segmap when get_victim f2fs: fix to clean previous mount option when remount_fs f2fs: skip punching hole in special condition f2fs: support large sector size f2fs: fix to truncate blocks past EOF in ->setattr f2fs: update i_size when __allocate_data_block f2fs: use MAX_BIO_BLOCKS(sbi) f2fs: remove redundant operation during roll-forward recovery ... |
da01e61428 | |
Merge branch 'for-3.18' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- support the NFSv4.2 SEEK operation (allowing clients to support
SEEK_HOLE/SEEK_DATA), thanks to Anna.
- end the grace period early in a number of cases, mitigating a
long-standing annoyance, thanks to Jeff
- improve SMP scalability, thanks to Trond"
* 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits)
nfsd: eliminate "to_delegation" define
NFSD: Implement SEEK
NFSD: Add generic v4.2 infrastructure
svcrdma: advertise the correct max payload
nfsd: introduce nfsd4_callback_ops
nfsd: split nfsd4_callback initialization and use
nfsd: introduce a generic nfsd4_cb
nfsd: remove nfsd4_callback.cb_op
nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
nfsd: fix nfsd4_cb_recall_done error handling
nfsd4: clarify how grace period ends
nfsd4: stop grace_time update at end of grace period
nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
nfsd: serialize nfsdcltrack upcalls for a particular client
nfsd: pass extra info in env vars to upcalls to allow for early grace period end
nfsd: add a v4_end_grace file to /proc/fs/nfsd
lockd: add a /proc/fs/lockd/nlm_end_grace file
nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
nfsd: remove redundant boot_time parm from grace_done client tracking op
...
|
6dea0737bc | |
NFS client updates for Linux 3.18
Highlights include:
Stable fixes:
- fix an NFSv4.1 state renewal regression
- fix open/lock state recovery error handling
- fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
- fix statd when reconnection fails
- Don't wake tasks during connection abort
- Don't start reboot recovery if lease check fails
- fix duplicate proc entries
Features:
- pNFS block driver fixes and clean ups from Christoph
- More code cleanups from Anna
- Improve mmap() writeback performance
- Replace use of PF_TRANS with a more generic mechanism for avoiding
deadlocks in nfs_release_page
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/OQi
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable fixes:
- fix an NFSv4.1 state renewal regression
- fix open/lock state recovery error handling
- fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
- fix statd when reconnection fails
- don't wake tasks during connection abort
- don't start reboot recovery if lease check fails
- fix duplicate proc entries
Features:
- pNFS block driver fixes and clean ups from Christoph
- More code cleanups from Anna
- Improve mmap() writeback performance
- Replace use of PF_TRANS with a more generic mechanism for avoiding
deadlocks in nfs_release_page"
* tag 'nfs-for-3.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (66 commits)
NFSv4.1: Fix an NFSv4.1 state renewal regression
NFSv4: fix open/lock state recovery error handling
NFSv4: Fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
NFS: Fabricate fscache server index key correctly
SUNRPC: Add missing support for RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT
NFSv3: Fix missing includes of nfs3_fs.h
NFS/SUNRPC: Remove other deadlock-avoidance mechanisms in nfs_release_page()
NFS: avoid waiting at all in nfs_release_page when congested.
NFS: avoid deadlocks with loop-back mounted NFS filesystems.
MM: export page_wakeup functions
SCHED: add some "wait..on_bit...timeout()" interfaces.
NFS: don't use STABLE writes during writeback.
NFSv4: use exponential retry on NFS4ERR_DELAY for async requests.
rpc: Add -EPERM processing for xs_udp_send_request()
rpc: return sent and err from xs_sendpages()
lockd: Try to reconnect if statd has moved
SUNRPC: Don't wake tasks during connection abort
Fixing lease renewal
nfs: fix duplicate proc entries
pnfs/blocklayout: Fix a 64-bit division/remainder issue in bl_map_stripe
...
|
25641c0c8d | |
Char/Misc driver patches for 3.18-rc1
Here's the big set of driver patches for char/misc drivers. Nothing major in here, the shortlog below goes into the details. All have been in the linux-next tree for a while with no issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlQ0ZXYACgkQMUfUDdst+ymiEgCgrKcYUluvdrbjdkhrENk332YN lcUAoMzgQpbkYhswrDNQet7NtAbFN9LV =ZPDy -----END PGP SIGNATURE----- Merge tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big set of driver patches for char/misc drivers. Nothing major in here, the shortlog goes into the details. All have been in the linux-next tree for a while with no issues" * tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (80 commits) mei: mei_txe_fw_sts can be static mei: fix kernel-doc warnings mei: fix KDoc documentation formatting mei: drop me_client_presentation_num mei: trivial: fix errors in prints in comments mei: remove include to pci header from mei module files mei: push pci cfg structure me hw mei: remove the reference to pdev from mei_device mei: move fw_status back to hw ops handlers mei: get rid of most of the pci dependencies in mei mei: push all standard settings into mei_device_init mei: move mei_hbm_hdr function from hbm.h the hbm.c mei: kill error message for allocation failure mei: nfc: fix style warning mei: fix style warning: Missing a blank line after declarations mei: pg: fix cat and paste error in comments mei: debugfs: add single buffer indicator mei: debugfs: adjust print buffer mei: add hbm and pg state in devstate debugfs print Drivers: hv: vmbus: Enable interrupt driven flow control ... |
ef0625b70d | |
Driver core patches for 3.18-rc1
Here's the driver core patches for 3.18-rc1. Just a few small things, and the addition of a new interface to dump firmware "core dumps" to userspace through sysfs that the wireless and graphic drivers want to use. All of these have been in linux-next for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlQ0ZgwACgkQMUfUDdst+ymh9ACfZi5TG1AD8/EesCoKaoTd4yJZ QOcAnjISbF9IKL1ia1fESqFYyTO+XqrP =YdeX -----END PGP SIGNATURE----- Merge tag 'driver-core-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the driver core patches for 3.18-rc1. Just a few small things, and the addition of a new interface to dump firmware "core dumps" to userspace through sysfs that the wireless and graphic drivers want to use. All of these have been in linux-next for a while" * tag 'driver-core-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: dynamic_debug: change __dynamic_<foo>_dbg return types to void driver/base/node: remove unnecessary kfree of node struct from unregister_one_node devres: Improve devm_kasprintf()/kvasprintf() support Documentation: devres: Add missing devm_kstrdup() managed interface Documentation: devres: Add missing IRQ functions firmware_class: make sure fw requests contain a name driver core: Remove kerneldoc from local function attribute_container: fix coding style issues attribute_container: fix whitespace errors drivers/base: Fix length checks in create_syslog_header()/dev_vprintk_emit() device coredump: add new device coredump class Documentation/sysfs-rules.txt: Add device attribute error code documentation |
bca51651fc | |
TTY/Serial driver patches for 3.18-rc1
Here's the big tty/serial driver patchset for 3.18-rc1. Lots of little things in here, some good work from Peter Hurley on the tty core, and in lots of drivers. There are also lots of other driver updates in here as well, full details in the changelog below. All have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlQ0aDwACgkQMUfUDdst+ymueACeI1i2exlGaBBSVQuUK2Jmx8Uz nukAn3KPuvvx+MKfMMBRpK0DQCzTxv4P =dwv1 -----END PGP SIGNATURE----- Merge tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver patchset for 3.18-rc1. Lots of little things in here, some good work from Peter Hurley on the tty core, and in lots of drivers. There are also lots of other driver updates in here as well, full details in the changelogs. All have been in the linux-next tree for a while" * tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (99 commits) Revert "serial/core: Initialize the console pm state" tty: serial: 8250: use 32bit variable for rpm_tx_active tty: serial: msm: Add earlycon support serial/core: Initialize the console pm state serial: asc: Conditionally use readl_relaxed (COMPILE_TEST) serial: of-serial: add PM suspend/resume support m68k: AMIGA_BUILTIN_SERIAL should depend on TTY asm/uapi: Add definition of TIOC[SG]RS485 tty/metag_da: Add console_poll module parameter serial: 8250_pci: remove rts_n override from Baytrail quirk serial: cadence: Add generic earlycon support serial: imx: change the wait even to interruptiable serial: imx: terminate the RX DMA when the UART is suspending serial: imx: fix throttle/unthrottle callbacks for hardware assisted flow control serial: 8250: Add Quark X1000 to 8250_pci.c tty: omap-serial: pull out calculation from baud_is_mode16 tty: omap-serial: fix division by zero xen_hvc: no reason to write the type key on xenstore tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused() ... |
683a52a101 | |
USB patches for 3.18-rc1
Here's the big USB patchset for 3.18-rc1. Also in here is the PHY tree, as it seems to fit well with the USB tree for various reasons... Anyway, lots of little changes in here, all over the place, full details in the changelog below. All have been in the linux-next tree for a while with no issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iEYEABECAAYFAlQ0aLYACgkQMUfUDdst+ylBvwCgs9fGRj0RQkLyGhQdEpzdZtTU ZcwAoMPBImnaA1ZeSl7ZnoO8vC/WE4bR =tfpj -----END PGP SIGNATURE----- Merge tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB patchset for 3.18-rc1. Also in here is the PHY tree, as it seems to fit well with the USB tree for various reasons... Anyway, lots of little changes in here, all over the place, full details in the changelog All have been in the linux-next tree for a while with no issues" * tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (244 commits) USB: host: st: fix typo 'CONFIG_USB_EHCI_HCD_ST' uas: Reduce number of function arguments for uas_alloc_foo functions xhci: Allow xHCI drivers to be built as separate modules xhci: Export symbols used by host-controller drivers xhci: Check for XHCI_COMP_MODE_QUIRK when disabling D3cold xhci: Introduce xhci_init_driver() usb: hcd: add generic PHY support usb: rename phy to usb_phy in HCD usb: gadget: uvc: fix up uvcg_v4l2_get_unmapped_area typo USB: host: st: fix ehci/ohci driver selection usb: host: ehci-exynos: Remove unnecessary usb-phy support usb: core: return -ENOTSUPP for all targeted hosts USB: Remove .owner field for driver usb: core: log higher level message on malformed LANGID descriptor usb: Add LED triggers for USB activity usb: Rename usb-common.c usb: gadget: Refactor request completion usb: gadget: Introduce usb_gadget_giveback_request() usb: dwc2/gadget: move phy bus legth initialization phy: remove .owner field for drivers using module_platform_driver ... |
463311960e | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu: - add multibuffer infrastructure (single_task_running scheduler helper, OKed by Peter on lkml. - add SHA1 multibuffer implementation for AVX2. - reenable "by8" AVX CTR optimisation after fixing counter overflow. - add APM X-Gene SoC RNG support. - SHA256/SHA512 now handles unaligned input correctly. - set lz4 decompressed length correctly. - fix algif socket buffer allocation failure for 64K page machines. - misc fixes * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (47 commits) crypto: sha - Handle unaligned input data in generic sha256 and sha512. Revert "crypto: aesni - disable "by8" AVX CTR optimization" crypto: aesni - remove unused defines in "by8" variant crypto: aesni - fix counter overflow handling in "by8" variant hwrng: printk replacement crypto: qat - Removed unneeded partial state crypto: qat - Fix typo in name of tasklet_struct crypto: caam - Dynamic allocation of addresses for various memory blocks in CAAM. crypto: mcryptd - Fix typos in CRYPTO_MCRYPTD description crypto: algif - avoid excessive use of socket buffer in skcipher arm64: dts: add random number generator dts node to APM X-Gene platform. Documentation: rng: Add X-Gene SoC RNG driver documentation hwrng: xgene - add support for APM X-Gene SoC RNG support crypto: mv_cesa - Add missing #define crypto: testmgr - add test for lz4 and lz4hc crypto: lz4,lz4hc - fix decompression crypto: qat - Use pci_enable_msix_exact() instead of pci_enable_msix() crypto: drbg - fix maximum value checks on 32 bit systems crypto: drbg - fix sparse warning for cpu_to_be[32|64] crypto: sha-mb - sha1_mb_alg_state can be static ... |
87d7bcee4f | |
Fixes and features for 3.18.
Apart from the usual cleanups, here is the summary of new features:
- s390 moves closer towards host large page support
- PowerPC has improved support for debugging (both inside the guest and
via gdbstub) and support for e6500 processors
- ARM/ARM64 support read-only memory (which is necessary to put firmware
in emulated NOR flash)
- x86 has the usual emulator fixes and nested virtualization improvements
(including improved Windows support on Intel and Jailhouse hypervisor
support on AMD), adaptive PLE which helps overcommitting of huge guests.
Also included are some patches that make KVM more friendly to memory
hot-unplug, and fixes for rare caching bugs.
Two patches have trivial mm/ parts that were acked by Rik and Andrew.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJUL5sPAAoJEBvWZb6bTYbyfkEP/3MNhSyn6HCjPjtjLNPAl9KL
WpExZSUFL2+4CztpdGIsek1BeJYHmqv3+c5S+WvaWVA1aqh2R7FT1D1ErBLjgLQq
lq23IOr+XxmC3dXQUEEk+TlD+283UzypzEG4l4UD3JYg79fE3UrXAz82SeyewJDY
x7aPYhkZG3RHu+wAyMPasG6E3zS5LySdUtGWbiPwz5BejrhBJoJdeb2WIL/RwnUK
7ppSLB5EoFj/uMkuyeAAdAbdfSrhHA6faDZxNdxS9k9wGutrhhfUoQ49ONrKG4dV
sFo1tSPTVgRs8QFYUZ2fJUPBAmUVddsgqh2K9d0NftGTq7b8YszaCsfFrs2/Y4MU
YxssWEhxsfszerCu12bbAJrv6JBZYQ7TwGvI9L7P0iFU6IVw/djmukU4AkM9/e91
YS/cue/PN+9Pn2ccXzL9J7xRtZb8FsOuRsCXTCmbOwDkLmrKPDBN2t3RUbeF+Eam
ABrpWnLKX13kZSo4LKU+/niarzmPMp7odQfHVdr8ea0fiYLp4iN8puA20WaSPIgd
CLvm+RAvXe5Lm91L4mpFotJ2uFyK6QlIYJV4FsgeWv/0D0qppWQi0Utb/aCNHCgy
z8MyUMD48y7EpoQrFYr/7cddXIu0/NegnM8I1coVjIPEk4NfeebGUlCJ/V3D8wMG
BgEfS2x6jRc5zB3hjwDr
=iEVi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Fixes and features for 3.18.
Apart from the usual cleanups, here is the summary of new features:
- s390 moves closer towards host large page support
- PowerPC has improved support for debugging (both inside the guest
and via gdbstub) and support for e6500 processors
- ARM/ARM64 support read-only memory (which is necessary to put
firmware in emulated NOR flash)
- x86 has the usual emulator fixes and nested virtualization
improvements (including improved Windows support on Intel and
Jailhouse hypervisor support on AMD), adaptive PLE which helps
overcommitting of huge guests. Also included are some patches that
make KVM more friendly to memory hot-unplug, and fixes for rare
caching bugs.
Two patches have trivial mm/ parts that were acked by Rik and Andrew.
Note: I will soon switch to a subkey for signing purposes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits)
kvm: do not handle APIC access page if in-kernel irqchip is not in use
KVM: s390: count vcpu wakeups in stat.halt_wakeup
KVM: s390/facilities: allow TOD-CLOCK steering facility bit
KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode
arm/arm64: KVM: Report correct FSC for unsupported fault types
arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc
kvm: Fix kvm_get_page_retry_io __gup retval check
arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
kvm: x86: Unpin and remove kvm_arch->apic_access_page
kvm: vmx: Implement set_apic_access_page_addr
kvm: x86: Add request bit to reload APIC access page address
kvm: Add arch specific mmu notifier for page invalidation
kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
kvm: Fix page ageing bugs
kvm/x86/mmu: Pass gfn and level to rmapp callback.
x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only
kvm: x86: use macros to compute bank MSRs
KVM: x86: Remove debug assertion of non-PAE reserved bits
kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
kvm: Faults which trigger IO release the mmap_sem
...
|
e4e65676f2 | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov: "A few new haptic/button drivers, a rudimentary support for laptops using FocalTech touchpads; xpad driver will bind to more devices, and a few other driver fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: soc_button_array - convert to platform bus Input: palmas-pwrbutton - fix typo in the license string Input: palmas-pwrbutton - use IRQF_ONESHOT Input: psmouse - add support for detecting FocalTech PS/2 touchpads Input: psmouse - add psmouse_matches_pnp_id helper function Input: joystick - use ktime for measuring timing Input: add haptic driver on max77693 Input: introduce palmas-pwrbutton Input: add support for the DRV2667 haptic driver Input: xpad - sync device IDs with xboxdrv Input: xpad - add VID/PID for Razer Sabertooth Input: cros_ec_keyb - optimize ghosting algorithm Input: drv260x - fix binding document Input: drv260x - add check for ERM mode and LRA Libraries Input: drv260x - remove unused defines Input: drv260x - add TI drv260x haptics driver |
1e345ac686 | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina: - quirk for devices that need to be pulled in much more aggresive way than mandated, by Johan Hovold - robustification of sanity checking of incoming reports in RMI driver, by Benjamin Tissoires - fixes, updates, and new HW support to SONY driver, by Frank Praznik - port of uHID to the new transport layer layout, by David Herrmann - robustification of Clear-Halt/reset in USB HID, by Alan Stern - native support for hopefully any future HID compliant wacom tablet. Those found on the various laptops (ISDv4/5) already are HID compliant and they should work in the future without any modification of the kernel. Written by Benjamin Tissoires. - a lot more simple fixes and device ID additions all over the place * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (45 commits) HID: uHID: fix excepted report type HID: usbhid: add another mouse that needs QUIRK_ALWAYS_POLL HID: wacom: implement the finger part of the HID generic handling HID: wacom: implement generic HID handling for pen generic devices HID: wacom: move allocation of inputs earlier HID: wacom: split out input allocation and registration HID: wacom: rename failN with some meaningful information HID: sony: Update the DualShock 4 touchpad resolution HID: wacom: fix timeout on probe for some wacoms HID: sony: Set touchpad bits in the input_configured callback HID: sony: Update file header and correct comments HID: sony: Corrections for the DualShock 4 HID descriptor HID: rmi: check sanity of the incoming report HID: wacom: make the WL connection friendly for the desktop HID: wacom - enable LED support for Wireless Intuos5/Pro HID: wacom - remove report_id from wacom_get_report interface HID: wacom - Clean up of sysfs HID: wacom - Add default permission defines for sysfs attributes HID: usbhid: fix PIXART optical mouse HID: Add Holtek USB ID 04d9:a0c2 ETEKCITY Scroll ... |
39520eea19 | |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull "trivial tree" updates from Jiri Kosina: "Usual pile from trivial tree everyone is so eagerly waiting for" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Remove MN10300_PROC_MN2WS0038 mei: fix comments treewide: Fix typos in Kconfig kprobes: update jprobe_example.c for do_fork() change Documentation: change "&" to "and" in Documentation/applying-patches.txt Documentation: remove obsolete pcmcia-cs from Changes Documentation: update links in Changes Documentation: Docbook: Fix generated DocBook/kernel-api.xml score: Remove GENERIC_HAS_IOMAP gpio: fix 'CONFIG_GPIO_IRQCHIP' comments tty: doc: Fix grammar in serial/tty dma-debug: modify check_for_stack output treewide: fix errors in printk genirq: fix reference in devm_request_threaded_irq comment treewide: fix synchronize_rcu() in comments checkstack.pl: port to AArch64 doc: queue-sysfs: minor fixes init/do_mounts: better syntax description MIPS: fix comment spelling powerpc/simpleboot: fix comment ... |
28596c9722 | |
spi: Updates for v3.18
A quiet release for SPI, mainly driver updates and not too many of them:
- Support for dummy transfers (for delays on startup) in drivers using
transfer_one().
- Lots of enhancements to the Designware driver to support new Intel
SoCs.
- Support for newer Renesas chips.
- DMA support for the i.MX driver.
- One new driver for Broadcom BCM53xx chips.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUMrIGAAoJECTWi3JdVIfQOEkH/2wn08N0k9OC9kx3JleIABBP
nRWq83eeUauwFP9Z+d3p/m1Ta6vhaU8tNR8HOa8bXo6GFB0H4uTbNyCv93lUSv1R
mdiUR9uAnM3Kxlx2Am9JhiDl1yB4O0dreHQI/xsyX6PCbnFbwc6MirhomZ04sAG0
4u2UsdENODNzeynUNH0cyysuFq830MtQibeSQAF0mc+gjlFDd1dxVGLmnEY0PC8L
WfRZrIyellB2Ss3VR87BlBejTPVatyw9VoQTXuy2v67chC/eZxudabaneq317DBi
Bxclv3eF3tZNZJa+6OyU+xTuwQsam51lcK7znZJEyaJYPltj/AvUdWy/8afjcj4=
=xAHI
-----END PGP SIGNATURE-----
Merge tag 'spi-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A quiet release for SPI, mainly driver updates and not too many of
them:
- Support for dummy transfers (for delays on startup) in drivers
using transfer_one().
- Lots of enhancements to the Designware driver to support new Intel
SoCs.
- Support for newer Renesas chips.
- DMA support for the i.MX driver.
- One new driver for Broadcom BCM53xx chips"
* tag 'spi-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
spi: spi-mxs: fix a tiny typo in a comment
spi: dw-mid: follow new DMAengine workflow
spi: dw-mid: convert to use DMAengine wrappers
spi: dw-mid: change magic numbers to the constants
spi: orion: support armada extended baud rates
spi: fsl: Sort include headers alphabetically
spi: bcm53xx: Add missing module information
spi: bcm53xx: Fix module dependency
spi/rockchip: fix bug that cause the failure to read data in DMA mode
spi: fsl-dspi: Remove probe info message
spi: pl022: Add support for chip select extension
spi: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
spi: dw: fix style of code in few places
spi: dw: introduce support of loopback mode
spi: dw-mid: terminate ongoing transfers at exit
spi: dw-mid: respect 8 bit mode
spi: clps711x: Migrate to the new clk subsystem
spi: pl022: Add missing error check for devm_kzalloc
spi: spi-imx: add DMA support
spi: davinci: add support for adding delay between word's transmissions
...
|
d29010694c | |
regulator: Updates for v3.18
This time around most of the changes are a lot of new drivers along with
the standard set of fixes and cleanups (thanks again largely to Axel
Lin). We do have one nice new feature in the core which factors out the
disappointingly tricky code around DT parsing, only a couple of drivers
have been converted so far:
- Factor out the code for parsing the standard bindings for a set of
regulators out of DT, making the probe part of a lot of drivers
simplier.
- New drivers for Dialog DA9213, HiSilicon HI6420, Intersil ISL9305/H,
Ricoh RN5T618, Rockchip RK808, Skyworks SKY81452, Silergy SYR82x, and
Qualcomm RPM.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUMpL1AAoJECTWi3JdVIfQeKMH/34XfyuVNShoxJCEU6zihqET
2C7WdjMqN7vRISsNDo4amfbYxGxzkj+QqqwmHYPdodGz8t/Pa6p7tmzofWUic/S7
Hhu3BqZ+9+oDTYCTJnGWqaASlfF0HxG50UQm/1c1eVbNnFUuGnQ59DrDJO/VhK+F
aHT52Zy50iN0vnG/qWNBR/duSI4ZMy3cZJenGTcnJb47ugLeV8qXZZPnEnG7Kr3z
4pwDbteCb6Y6AaEw2O+cyPOM90vQ+ANnGt74faLCLe+UZ5i0XK+3K5mRaw36ID+Y
6WmY/8ROcLXD757kVLiXjAExH42/n7Wa9RFpD8ho2o2dsKEra/9Q+t18LMtklos=
=CTFD
-----END PGP SIGNATURE-----
Merge tag 'regulator-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This time around most of the changes are a lot of new drivers along
with the standard set of fixes and cleanups (thanks again largely to
Axel Lin). We do have one nice new feature in the core which factors
out the disappointingly tricky code around DT parsing, only a couple
of drivers have been converted so far:
- Factor out the code for parsing the standard bindings for a set of
regulators out of DT, making the probe part of a lot of drivers
simplier.
- New drivers for Dialog DA9213, HiSilicon HI6420, Intersil
ISL9305/H, Ricoh RN5T618, Rockchip RK808, Skyworks SKY81452,
Silergy SYR82x, and Qualcomm RPM"
* tag 'regulator-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (71 commits)
regulator: da9211: Fix a bug in update of mask bit
regulator: pwm-regulator: add devicetree bindings for pwm regulator
regulator: pwm-regulator: get voltage and duty table from dts
regulator: qcom_rpm: Fix FORCE_MODE_IS_2_BITS macro
regulator: qcom_rpm: Don't explicitly initialise the first field of config
regulator: ltc3589: fix broken voltage transitions
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
regulator: axp20x: Use parent device as regulator configuration device
regulator: fan53555: Fix null pointer dereference
regulator: fan53555: Fixup report wrong vendor message
regulator: fan53555: fix wrong cast in probe
regulator: fan53555: add support for Silergy SYR82x regulators
regulator: fan53555: add devicetree support
regulator: add devicetree bindings for Fairchild FAN53555 regulators
regulator: rk808: Add function for ramp delay for buck1/buck2
regulator: fan53555: use set_ramp_delay to set the ramp up slew rate
regulator: fan53555: enable vin supply
regulator: rk808: Fix missing of_node_put
regulator: rk808: Remove unused variables
regulator: of: Add stub OF match function for !OF case
...
|
81e29b7d1b | |
This is the bulk of pin control changes for the v3.18
development series:
- New drivers for the Freescale i.MX21, Qualcomm APQ8084
pin controllers.
- Incremental new features on the Rockchip, atlas 6,
OMAP, AM437x, APQ8064, prima2, AT91, Tegra, i.MX, Berlin
and Nomadik.
- Push Freescale drivers down into their own subdirectory.
- Assorted sprays of syntax and semantic fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=b4Tn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control changes from Linus Walleij:
"This is the bulk of pin control changes for the v3.18 development
series:
- New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin
controllers.
- Incremental new features on the Rockchip, atlas 6, OMAP, AM437x,
APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik.
- Push Freescale drivers down into their own subdirectory.
- Assorted sprays of syntax and semantic fixes"
* tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
pinctrl: specify bindings for pins and groups
pinctrl: nomadik: improve GPIO debug prints
pinctrl: abx500: refactor DT parser to take two paths
pinctrl: abx500: use helpers for map allocation/free
pinctrl: alter device tree bindings for functions
pinctrl: nomadik: refactor DT parser to take two paths
pinctrl: nomadik: use utils map free function
pinctrl: nomadik: use util function to reserve maps
pinctrl: qcom: use restart_notifier mechanism for ps_hold
pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation
pinctrl: berlin: fix the dt_free_map function
pinctrl: at91: disable PD or PU before enabling PU or PD
pinctrl: st: remove gpiochip in failure cases
pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add
pinctrl: at91: Fix failure path in at91_gpio_probe path
pinctrl: lantiq: Release gpiochip resources in fail case
pinctrl: imx: detect uninitialized pins
pinctrl: tegra: Add MIPI pad control
pinctrl: at91: Switch to using managed clk_get
pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges
...
|
2b425a3f11 | |
dmaengine-3.17
1/ Step down as dmaengine maintainer see commit |
d0cd84817c | |
Nothing major: support for compressing modules, and auto-tainting params.
Cheers,
Rusty.
PS. My virtio-next tree is empty: DaveM took the patches I had. There might
be a virtio-rng starvation fix, but so far it's a bit voodoo so I will
get to that in the next two days or it will wait.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=QzCn
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module update from Rusty Russell:
"Nothing major: support for compressing modules, and auto-tainting
params.
PS. My virtio-next tree is empty: DaveM took the patches I had. There
might be a virtio-rng starvation fix, but so far it's a bit voodoo
so I will get to that in the next two days or it will wait"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
moduleparam: Resolve missing-field-initializer warning
kbuild: handle module compression while running 'make modules_install'.
modinst: wrap long lines in order to enhance cmd_modules_install
modsign: lookup lines ending in .ko in .mod files
modpost: simplify file name generation of *.mod.c files
modpost: reduce visibility of symbols and constify r/o arrays
param: check for tainting before calling set op.
drm/i915: taint the kernel if unsafe module parameters are set
module: add module_param_unsafe and module_param_named_unsafe
module: make it possible to have unsafe, tainting module params
module: rename KERNEL_PARAM_FL_NOARG to avoid confusion
|
bdf428feb2 | |
locks: fix fcntl_setlease/getlease return when !CONFIG_FILE_LOCKING
Currently they both just return 0. Fix them to return more appropriate values instead. For better or worse, most places in the kernel return -EINVAL when leases aren't available. -ENOLCK would probably have been better, but let's follow suit here in the case of F_SETLEASE. In the F_GETLEASE case, just return F_UNLCK since we know that no lease will have been set. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
1b2b32dcdb | |
locks: set fl_owner for leases to filp instead of current->files
Like flock locks, leases are owned by the file description. Now that the i_have_this_lease check in __break_lease is gone, we don't actually use the fl_owner for leases for anything. So, it's now safe to set this more appropriately to the same value as the fl_file. While we're at it, fix up the comments over the fl_owner_t definition since they're rather out of date. Signed-off-by: Jeff Layton <jlayton@primarydata.com> |
7ca76311fe | |
locks: give lm_break a return value
Christoph suggests:
"Add a return value to lm_break so that the lock manager can tell the
core code "you can delete this lease right now". That gets rid of
the games with the timeout which require all kinds of race avoidance
code in the users."
Do that here and have the nfsd lease break routine use it when it detects
that there was a race between setting up the lease and it being broken.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
4d01b7f5e7 | |
locks: move freeing of leases outside of i_lock
There was only one place where we still could free a file_lock while holding the i_lock -- lease_modify. Add a new list_head argument to the lm_change operation, pass in a private list when calling it, and fix those callers to dispose of the list once the lock has been dropped. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
c45198eda2 | |
locks: define a lm_setup handler for leases
...and move the fasync setup into it for fcntl lease calls. At the same time, change the semantics of how the file_lock double-pointer is handled. Up until now, on a successful lease return you got a pointer to the lock on the list. This is bad, since that pointer can no longer be relied on as valid once the inode->i_lock has been released. Change the code to instead just zero out the pointer if the lease we passed in ended up being used. Then the callers can just check to see if it's NULL after the call and free it if it isn't. The priv argument has the same semantics. The lm_setup function can zero the pointer out to signal to the caller that it should not be freed after the function returns. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
1c7dd2ff43 | |
locks: plumb a "priv" pointer into the setlease routines
In later patches, we're going to add a new lock_manager_operation to finish setting up the lease while still holding the i_lock. To do this, we'll need to pass a little bit of info in the fcntl setlease case (primarily an fasync structure). Plumb the extra pointer into there in advance of that. We declare this pointer as a void ** to make it clear that this is private info, and that the caller isn't required to set this unless the lm_setup specifically requires it. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Reviewed-by: Christoph Hellwig <hch@lst.de> |
e6f5c78930 | |
net: better IFF_XMIT_DST_RELEASE support
Testing xmit_more support with netperf and connected UDP sockets, I found strange dst refcount false sharing. Current handling of IFF_XMIT_DST_RELEASE is not optimal. Dropping dst in validate_xmit_skb() is certainly too late in case packet was queued by cpu X but dequeued by cpu Y The logical point to take care of drop/force is in __dev_queue_xmit() before even taking qdisc lock. As Julian Anastasov pointed out, need for skb_dst() might come from some packet schedulers or classifiers. This patch adds new helper to cleanly express needs of various drivers or qdiscs/classifiers. Drivers that need skb_dst() in their ndo_start_xmit() should call following helper in their setup instead of the prior : dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; -> netif_keep_dst(dev); Instead of using a single bit, we use two bits, one being eventually rebuilt in bonding/team drivers. The other one, is permanent and blocks IFF_XMIT_DST_RELEASE being rebuilt in bonding/team. Eventually, we could add something smarter later. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net> |
0287587884 | |
net: phy: adjust fixed_phy_register() return value
Adjust fixed_phy_register() to return struct phy_device *, so that it becomes easy to use fixed PHYs without device tree support: phydev = fixed_phy_register(PHY_POLL, &fixed_phy_status, NULL); fixed_phy_set_link_update(phydev, fixed_phy_link_update); phy_connect_direct(netdev, phydev, handler_fn, phy_interface); This change is a prerequisite for modifying bcmgenet driver to work without a device tree on Broadcom's MIPS-based 7xxx platforms. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
fd2ef0ba30 | |
Merge branch 'pm-avs'
* pm-avs: MAINTAINERS: update entry for drivers/power/avs PM / AVS: rockchip-io: add driver handling Rockchip io domains regulator: core: Add REGULATOR_EVENT_PRE_VOLTAGE_CHANGE (and ABORT) |
4734c6efc8 | |
Merge branch 'pm-cpufreq'
* pm-cpufreq:
cpufreq: cpufreq-dt: fix potential double put of cpu OF node
cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
cpufreq: ppc-corenet: remove duplicate update of cpu_data
cpufreq: Replace strnicmp with strncasecmp
cpufreq: powernv: Set the cpus to nominal frequency during reboot/kexec
cpufreq: powernv: Set the pstate of the last hotplugged out cpu in policy->cpus to minimum
cpufreq: Allow stop CPU callback to be used by all cpufreq drivers
cpufreq: cpu0: Make allocate_resources() work for any CPU
cpufreq: cpu0: try regulators with name "cpu-supply"
cpufreq: cpu0: Move per-cluster initialization code to ->init()
cpufreq: cpu0: use dev_{err|warn|dbg} instead of pr_{err|warn|debug}
cpufreq: cpu0: print relevant error when we defer probe
cpufreq: cpu0: don't validate clock on clk_put()
cpufreq: cpu0: Update Module Author
cpufreq: Add support for per-policy driver data
|
0f4685d0ec | |
Merge branch 'pm-domains'
* pm-domains: (32 commits) PM / Domains: Rename cpu_data to cpuidle_data PM / Domains: Move dev_pm_domain_attach|detach() to pm_domain.h PM / Domains: Remove legacy API for adding devices through DT PM / Domains: Add genpd attach/detach callbacks PM / Domains: add debugfs listing of struct generic_pm_domain-s ACPI / PM: Convert acpi_dev_pm_detach() into a static function ARM: exynos: Move to generic PM domain DT bindings amba: Add support for attach/detach of PM domains spi: core: Convert to dev_pm_domain_attach|detach() mmc: sdio: Convert to dev_pm_domain_attach|detach() i2c: core: Convert to dev_pm_domain_attach|detach() drivercore / platform: Convert to dev_pm_domain_attach|detach() PM / Domains: Add APIs to attach/detach a PM domain for a device PM / Domains: Add generic OF-based PM domain look-up ACPI / PM: Assign the ->detach() callback when attaching the PM domain PM / Domains: Add a detach callback to the struct dev_pm_domain PM / domains: Spelling s/domian/domain/ PM / domains: Keep declaration of dev_power_governors together PM / domains: Remove default_stop_ok() API drivers: sh: Leave disabling of unused PM domains to genpd ... |
49a09c9ab0 | |
net: introduce netdevice gso_min_segs attribute
Some TSO engines might have a too heavy setup cost, that impacts performance on hosts sending small bursts (2 MSS per packet). This patch adds a device gso_min_segs, allowing drivers to set a minimum segment size for TSO packets, according to the NIC performance. Tested on a mlx4 NIC, this allows to get a ~110% increase of throughput when sending 2 MSS per packet. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
fcbeb976d7 | |
|
Merge branches 'for-3.18/always-poll-quirk', 'for-3.18/logitech', 'for-3.18/picolcd', 'for-3.18/rmi', 'for-3.18/sony', 'for-3.18/uhid', 'for-3.18/upstream' and 'for-3.18/wacom' into for-linus
|
ee5db7e47f | |
mfd: cros_ec: stop calling ->cmd_xfer() directly
Instead of having users of the ChromeOS EC call the interface-specific cmd_xfer() callback directly, introduce a central cros_ec_cmd_xfer() to use instead. This will allow us to put all the locking and retry logic in one place instead of duplicating it across the different drivers. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
a6551a76ff | |
net/mlx4_en: Code cleanups in tx path
- Remove unused variable ring->poll_cnt - No need to set some fields if using blueflame - Add missing const's - Use unlikely - Remove unneeded new line - Make some comments more precise - struct mlx4_bf @offset field reduced to unsigned int to save space Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
7dfa4b414d | |
Merge tag 'master-2014-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next
John W. Linville says:
====================
pull request: wireless-next 2014-10-03
Please pull tihs batch of updates intended for the 3.18 stream!
For the iwlwifi bits, Emmanuel says:
"I have here a few things that depend on the latest mac80211's changes:
RRM, TPC, Quiet Period etc... Eyal keeps improving our rate control
and we have a new device ID. This last patch should probably have
gone to wireless.git, but at that stage, I preferred to send it to
-next and CC stable."
For (most of) the Atheros bits, Kalle says:
"The only new feature is testmode support from me. Ben added a new method
to crash the firmware with an assert for debug purposes. As usual, we
have lots of smaller fixes from Michal. Matteo fixed a Kconfig
dependency with debugfs. I fixed some warnings recently added to
checkpatch."
For the NFC bits, Samuel says:
"We've had major updates for TI and ST Microelectronics drivers, and a
few NCI related changes.
For TI's trf7970a driver:
- Target mode support for trf7970a
- Suspend/resume support for trf7970a
- DT properties additions to handle different quirks
- A bunch of fixes for smartphone IOP related issues
For ST Microelectronics' ST21NFCA and ST21NFCB drivers:
- ISO15693 support for st21nfcb
- checkpatch and sparse related warning fixes
- Code cleanups and a few minor fixes
Finally, Marvell added ISO15693 support to the NCI stack, together with a
couple of NCI fixes."
For the Bluetooth bits, Johan says:
"This 3.18 pull request replaces the one I did on Monday ("bluetooth-next
2014-09-22", which hasn't been pulled yet). The additions since the last
request are:
- SCO connection fix for devices not supporting eSCO
- Cleanups regarding the SCO establishment logic
- Remove unnecessary return value from logging functions
- Header compression fix for 6lowpan
- Cleanups to the ieee802154/mrf24j40 driver
Here's a copy from previous request that this one replaces:
'
Here are some more patches for 3.18. They include various fixes to the
btusb HCI driver, a fix for LE SMP, as well as adding Jukka to the
MAINTAINERS file for generic 6LoWPAN (as requested by Alexander Aring).
I've held on to this pull request a bit since we were waiting for a SCO
related fix to get sorted out first. However, since the merge window is
getting closer I decided not to wait for it. If we do get the fix sorted
out there'll probably be a second small pull request later this week.
'"
And,
"Unless 3.17 gets delayed this will probably be our last -next pull request for
3.18. We've got:
- New Marvell hardware supportr
- Multicast support for 6lowpan
- Several of 6lowpan fixes & cleanups
- Fix for a (false-positive) lockdep warning in L2CAP
- Minor btusb cleanup"
On top of all that comes the usual sort of updates to ath5k, ath9k,
ath10k, brcmfmac, mwifiex, and wil6210. This time around there are
also a number of rtlwifi updates to enable some new hardware and
to reconcile the in-kernel drivers with some newer releases of the
Realtek vendor drivers. Also of note is some device tree work for
the bcma bus.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
a4b4a2b7f9 | |
net: Cleanup skb cloning by adding SKB_FCLONE_FREE
SKB_FCLONE_UNAVAILABLE has overloaded meaning depending on type of skb. 1: If skb is allocated from head_cache, it indicates fclone is not available. 2: If skb is a companion fclone skb (allocated from fclone_cache), it indicates it is available to be used. To avoid confusion for case 2 above, this patch replaces SKB_FCLONE_UNAVAILABLE with SKB_FCLONE_FREE where appropriate. For fclone companion skbs, this indicates it is free for use. SKB_FCLONE_UNAVAILABLE will now simply indicate skb is from head_cache and cannot / will not have a companion fclone. Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
c8753d55af | |
of: Introduce Device Tree resolve support.
Introduce support for dynamic device tree resolution. Using it, it is possible to prepare a device tree that's been loaded on runtime to be modified and inserted at the kernel live tree. Export of of_resolve and bug fix of double free by Guenter Roeck <groeck@juniper.net> Signed-off-by: Pantelis Antoniou <pantelis.antoniou@konsulko.com> [grant.likely: Don't need to select CONFIG_OF_DYNAMIC and CONFIG_OF_DEVICE] [grant.likely: Don't need to depend on OF or !SPARC] [grant.likely: Factor out duplicate code blocks into single function] Signed-off-by: Grant Likely <grant.likely@linaro.org> |
7941b27b16 | |
fou: eliminate IPv4,v6 specific GRO functions
This patch removes fou[46]_gro_receive and fou[46]_gro_complete functions. The v4 or v6 variants were chosen for the UDP offloads based on the address family of the socket this is not necessary or correct. Alternatively, this patch adds is_ipv6 to napi_gro_skb. This is set in udp6_gro_receive and unset in udp4_gro_receive. In fou_gro_receive the value is used to select the correct inet_offloads for the protocol of the outer IP header. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
efc98d08e1 | |
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git
Freescale updates from Scott (27 commits): "Highlights include DMA32 zone support (SATA, USB, etc now works on 64-bit FSL kernels), MSI changes, 8xx optimizations and cleanup, t104x board support, and PrPMC PCI enumeration." |
75d43b2d0a | |
net/mlx5_core: Identify resources by their type
This patch puts a common part as the first field of mlx5_core_qp. This field is used to identify which resource generated an event. This is required since upcoming new resource types such as DC targets are allocated for the same numerical space as regular QPs and may generate the same events. By searching the resource in the same table we can then look at the common field to identify the resource. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
5903325a64 | |
net/mlx5_core: use set/get macros in device caps
Transform device capabilities related commands to use set/get macros to manipulate command mailboxes. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
b775516b04 | |
net/mlx5_core: Use hardware registers description header file
Add an auto generated header file that describes hardware registers along with set of macros that set/get values. The macros do static checks to avoid overflow, handle endianess, and overall provide a clean way to code commands. Currently the header file is small and we will add structs as we make use of the macros. A few commands were removed from the commands enum since they are not supported currently and will be added when support is available. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
d29b796ada | |
net/mlx5_core: Update device capabilities handling
Rearrange struct mlx5_caps so it has a "gen" field to represent the current capabilities configured for the device. Max capabilities can also be queried from the device. Also update capabilities struct to contain more fields as per the latest revision if firmware specification. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
c7a08ac7ee | |
qdisc: validate skb without holding lock
Validation of skb can be pretty expensive : GSO segmentation and/or checksum computations. We can do this without holding qdisc lock, so that other cpus can queue additional packets. Trick is that requeued packets were already validated, so we carry a boolean so that sch_direct_xmit() can validate a fresh skb list, or directly use an old one. Tested on 40Gb NIC (8 TX queues) and 200 concurrent flows, 48 threads host. Turning TSO on or off had no effect on throughput, only few more cpu cycles. Lock contention on qdisc lock disappeared. Same if disabling TX checksum offload. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
55a93b3ea7 | |
dynamic_debug: change __dynamic_<foo>_dbg return types to void
The return value is not used by callers of these functions so change the functions to return void. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
906d201530 | |
block: add bioset_create_nobvec()
Users of bio_clone_fast() do not want bios with their own bvecs. Allocating a bvec mempool as part of the bioset intended for such users is a waste of memory. bioset_create_nobvec() creates a bioset that doesn't have the bvec mempool. Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com> |
d8f429e166 | |
|
Merge remote-tracking branches 'spi/topic/pl022', 'spi/topic/pxa2xx', 'spi/topic/rspi', 'spi/topic/sh-msiof' and 'spi/topic/sirf' into spi-next
|
bab4d751f7 | |
PM / Domains: Rename cpu_data to cpuidle_data
The "cpu_data" are defined for some archs and thus conflicting with the
"cpu_data" member in the struct gpd_cpu_data. This causes a compiler
error for those archs.
Let's fix it by rename the member to cpuidle_data. In this context it
also seems appropriate to rename the struct to gpd_cpuidle_data to
better reflect its use.
Fixes:
|
f39cb1797e | |
|
Merge back cpufreq material for v3.18.
|
6f1293ff74 | |
mmc: sdhci: Add quirk for always getting TC with stop cmd
Add a quirk for a host controller that always sets a Transfer Complete interrupt status for the stop command even when a busy response is not indicated. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> |
6154139794 | |
locking/lockdep: Revert qrwlock recusive stuff
Commit
|
8acd91e862 |