mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-18 21:58:11 +07:00
| SHA1 | ||
|---|---|---|
commit b40341fad6cc2daa195f8090fd3348f18fff640a upstream.
The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.
rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.
Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net
Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@kernel.org>
Fixes:
Steven Rostedt (VMware)
authored and
 Greg Kroah-Hartman
commited |
2fd5a462eb | |
commit 46bbe5c671e06f070428b9be142cc4ee5cedebac upstream.
clang static analyzer reports this problem
trace_events_hist.c:3824:3: warning: Attempt to free
released memory
kfree(hist_data->attrs->var_defs.name[i]);
In parse_var_defs() if there is a problem allocating
var_defs.expr, the earlier var_defs.name is freed.
This free is duplicated by free_var_defs() which frees
the rest of the list.
Because free_var_defs() has to run anyway, remove the
second free fom parse_var_defs().
Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com
Cc: stable@vger.kernel.org
Fixes:
Tom Rix
authored and
Greg Kroah-Hartman
commited |
240dd5118a | |
[ Upstream commit 73ac74c7d489756d2313219a108809921dbfaea1 ] Switch order so that locking state is consistent even if the IRQ tracer calls into lockdep again. Acked-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Sven Schnelle
authored and
Greg Kroah-Hartman
commited |
aafa75ff39 | |
[ Upstream commit bf2cbe044da275021b2de5917240411a19e5c50d ]
Clang warns:
../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).
Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com
Link: https://github.com/ClangBuiltLinux/linux/issues/893
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor
authored and
Greg Kroah-Hartman
commited |
b92d156a32 | |
[ Upstream commit cbc3b92ce037f5e7536f6db157d185cd8b8f615c ] I noticed when trying to use the trace-cmd python interface that reading the raw buffer wasn't working for kernel_stack events. This is because it uses a stubbed version of __dynamic_array that doesn't do the __data_loc trick and encode the length of the array into the field. Instead it just shows up as a size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES since this is what we actually do in practice and matches how user_stack_trace works. Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.com Signed-off-by: Josef Bacik <jbacik@fb.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Josef Bacik
authored and
Greg Kroah-Hartman
commited |
72913876dc | |
[ Upstream commit 953ae45a0c25e09428d4a03d7654f97ab8a36647 ]
As part of commit f45d1225adb0 ("tracing: Kernel access to Ftrace
instances") we exported certain functions. Here, we are adding some additional
NULL checks to ensure safe usage by users of these APIs.
Link: http://lkml.kernel.org/r/1565805327-579-4-git-send-email-divya.indi@oracle.com
Signed-off-by: Divya Indi <divya.indi@oracle.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Divya Indi
authored and
Greg Kroah-Hartman
commited |
cbef6b996e | |
[ Upstream commit b431ef837e3374da0db8ff6683170359aaa0859c ] We make an assumption that a debugfs directory exists, but since this can fail ensure it exists before allowing blktrace setup to complete. Otherwise we end up stuffing blktrace files on the debugfs root directory. In the worst case scenario this *in theory* can create an eventual panic *iff* in the future a similarly named file is created prior on the debugfs root directory. This theoretical crash can happen due to a recursive removal followed by a specific dentry removal. This doesn't fix any known crash, however I have seen the files go into the main debugfs root directory in cases where the debugfs directory was not created due to other internal bugs with blktrace now fixed. blktrace is also completely useless without this directory, so this ensures to userspace we only setup blktrace if the kernel can stuff files where they are supposed to go into. debugfs directory creations typically aren't checked for, and we have maintainers doing sweep removals of these checks, but since we need this check to ensure proper userspace blktrace functionality we make sure to annotate the justification for the check. Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Luis Chamberlain
authored and
Greg Kroah-Hartman
commited |
f4e8607651 | |
commit afcab636657421f7ebfa0783a91f90256bba0091 upstream. On exit, if a process is preempted after the trace_sched_process_exit() tracepoint but before the process is done exiting, then when it gets scheduled in, the function tracers will not filter it properly against the function tracing pid filters. That is because the function tracing pid filters hooks to the sched_process_exit() tracepoint to remove the exiting task's pid from the filter list. Because the filtering happens at the sched_switch tracepoint, when the exiting task schedules back in to finish up the exit, it will no longer be in the function pid filtering tables. This was noticeable in the notrace self tests on a preemptable kernel, as the tests would fail as it exits and preempted after being taken off the notrace filter table and on scheduling back in it would not be in the notrace list, and then the ending of the exit function would trace. The test detected this and would fail. Cc: stable@vger.kernel.org Cc: Namhyung Kim <namhyung@kernel.org> Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
2c98c4a0c3 | |
commit 96b4833b6827a62c295b149213c68b559514c929 upstream.
In calculation of the cpu mask for the hwlat kernel thread, the wrong
cpu mask is used instead of the tracing_cpumask, this causes the
tracing/tracing_cpumask useless for hwlat tracer. Fixes it.
Link: https://lkml.kernel.org/r/20200730082318.42584-2-haokexin@gmail.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
Kevin Hao
authored and
Greg Kroah-Hartman
commited |
b3b77736dd | |
commit 8a224ffb3f52b0027f6b7279854c71a31c48fc97 upstream.
When module loaded and enabled, we will use __ftrace_replace_code
for module if any ftrace_ops referenced it found. But we will get
wrong ftrace_addr for module rec in ftrace_get_addr_new, because
rec->flags has not been setup correctly. It can cause the callback
function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called
with pt_regs set to NULL.
So setup correct FTRACE_FL_REGS flags for rec when we call
referenced_filters to find ftrace_ops references it.
Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com
Cc: stable@vger.kernel.org
Fixes:
Chengming Zhou
authored and
Greg Kroah-Hartman
commited |
892fd3637a | |
[ Upstream commit 96c5c6e6a5b6db592acae039fed54b5c8844cd35 ] In predicate_parse, there is an error path that is not going to out_free instead it returns directly which leads to a memory leak. Link: http://lkml.kernel.org/r/20190920225800.3870-1-navid.emamdoost@gmail.com Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Navid Emamdoost
authored and
Greg Kroah-Hartman
commited |
7deb2dcb89 | |
commit 097350d1c6e1f5808cae142006f18a0bbc57018d upstream.
Currently the ring buffer makes events that happen in interrupts that preempt
another event have a delta of zero. (Hopefully we can change this soon). But
this is to deal with the races of updating a global counter with lockless
and nesting functions updating deltas.
With the addition of absolute time stamps, the time extend didn't follow
this rule. A time extend can happen if two events happen longer than 2^27
nanoseconds appart, as the delta time field in each event is only 27 bits.
If that happens, then a time extend is injected with 2^59 bits of
nanoseconds to use (18 years). But if the 2^27 nanoseconds happen between
two events, and as it is writing the event, an interrupt triggers, it will
see the 2^27 difference as well and inject a time extend of its own. But a
recent change made the time extend logic not take into account the nesting,
and this can cause two time extend deltas to happen moving the time stamp
much further ahead than the current time. This gets all reset when the ring
buffer moves to the next page, but that can cause time to appear to go
backwards.
This was observed in a trace-cmd recording, and since the data is saved in a
file, with trace-cmd report --debug, it was possible to see that this indeed
did happen!
bash-52501 110d... 81778.908247: sched_switch: bash:52501 [120] S ==> swapper/110:0 [120] [12770284:0x2e8:64]
<idle>-0 110d... 81778.908757: sched_switch: swapper/110:0 [120] R ==> bash:52501 [120] [509947:0x32c:64]
TIME EXTEND: delta:306454770 length:0
bash-52501 110.... 81779.215212: sched_swap_numa: src_pid=52501 src_tgid=52388 src_ngid=52501 src_cpu=110 src_nid=2 dst_pid=52509 dst_tgid=52388 dst_ngid=52501 dst_cpu=49 dst_nid=1 [0:0x378:48]
TIME EXTEND: delta:306458165 length:0
bash-52501 110dNh. 81779.521670: sched_wakeup: migration/110:565 [0] success=1 CPU:110 [0:0x3b4:40]
and at the next page, caused the time to go backwards:
bash-52504 110d... 81779.685411: sched_switch: bash:52504 [120] S ==> swapper/110:0 [120] [8347057:0xfb4:64]
CPU:110 [SUBBUFFER START] [81779379165886:0x1320000]
<idle>-0 110dN.. 81779.379166: sched_wakeup: bash:52504 [120] success=1 CPU:110 [0:0x10:40]
<idle>-0 110d... 81779.379167: sched_switch: swapper/110:0 [120] R ==> bash:52504 [120] [1168:0x3c:64]
Link: https://lkml.kernel.org/r/20200622151815.345d1bf5@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
authored and
 Sasha Levin
commited |
a1de406751 | |
commit 6784beada631800f2c5afd567e5628c843362cee upstream.
Fix the event trigger to accept redundant spaces in
the trigger input.
For example, these return -EINVAL
echo " traceon" > events/ftrace/print/trigger
echo "traceon if common_pid == 0" > events/ftrace/print/trigger
echo "disable_event:kmem:kmalloc " > events/ftrace/print/trigger
But these are hard to find what is wrong.
To fix this issue, use skip_spaces() to remove spaces
in front of actual tokens, and set NULL if there is no
token.
Link: http://lkml.kernel.org/r/159262476352.185015.5261566783045364186.stgit@devnote2
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: stable@vger.kernel.org
Fixes:
Masami Hiramatsu
authored and
Sasha Levin
commited |
e8f436c0f1 | |
[ Upstream commit 1b0b283648163dae2a214ca28ed5a99f62a77319 ] We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktrace Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Luis Chamberlain
authored and
Sasha Levin
commited |
c7b333600a | |
[ Upstream commit 5aec598c456fe3c1b71a1202cbb42bdc2a643277 ] The function blk_log_remap() can be simplified by removing the call to get_pdu_remap() that copies the values into extra variable to print the data, which also fixes the endiannness warning reported by sparse. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Chaitanya Kulkarni
authored and
Greg Kroah-Hartman
commited |
ea9c523635 | |
[ Upstream commit 71df3fd82e7cccec7b749a8607a4662d9f7febdd ] In function get_pdu_len() replace variable type from __u64 to __be64. This fixes sparse warning. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni
authored and
Greg Kroah-Hartman
commited |
f381b7b180 | |
[ Upstream commit 48bc3cd3e07a1486f45d9971c75d6090976c3b1b ] In blk_add_trace_spliti() blk_add_trace_bio_remap() use blk_status_to_errno() to pass the error instead of pasing the bi_status. This fixes the sparse warning. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Chaitanya Kulkarni
authored and
Greg Kroah-Hartman
commited |
48adb95b73 | |
commit 78a5255ffb6a1af189a83e493d916ba1c54d8c75 upstream. We have some rather random rules about when we accept the "maybe-initialized" warnings, and when we don't. For example, we consider it unreliable for gcc versions < 4.9, but also if -O3 is enabled, or if optimizing for size. And then various kernel config options disabled it, because they know that they trigger that warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES). And now gcc-10 seems to be introducing a lot of those warnings too, so it falls under the same heading as 4.9 did. At the same time, we have a very straightforward way to _enable_ that warning when wanted: use "W=2" to enable more warnings. So stop playing these ad-hoc games, and just disable that warning by default, with the known and straight-forward "if you want to work on the extra compiler warnings, use W=123". Would it be great to have code that is always so obvious that it never confuses the compiler whether a variable is used initialized or not? Yes, it would. In a perfect world, the compilers would be smarter, and our source code would be simpler. That's currently not the world we live in, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Linus Torvalds
authored and
Greg Kroah-Hartman
commited |
ec22322218 | |
commit b303c6df80c9f8f13785aa83a0471fca7e38b24d upstream. Since -Wmaybe-uninitialized was introduced by GCC 4.7, we have patched various false positives: - commit 
Masahiro Yamada
authored and
Greg Kroah-Hartman
commited |
9088569b56 | |
commit 11f5efc3ab66284f7aaacc926e9351d658e2577b upstream.
x86_64 lazily maps in the vmalloc pages, and the way this works with per_cpu
areas can be complex, to say the least. Mappings may happen at boot up, and
if nothing synchronizes the page tables, those page mappings may not be
synced till they are used. This causes issues for anything that might touch
one of those mappings in the path of the page fault handler. When one of
those unmapped mappings is touched in the page fault handler, it will cause
another page fault, which in turn will cause a page fault, and leave us in
a loop of page faults.
Commit 763802b53a42 ("x86/mm: split vmalloc_sync_all()") split
vmalloc_sync_all() into vmalloc_sync_unmappings() and
vmalloc_sync_mappings(), as on system exit, it did not need to do a full
sync on x86_64 (although it still needed to be done on x86_32). By chance,
the vmalloc_sync_all() would synchronize the page mappings done at boot up
and prevent the per cpu area from being a problem for tracing in the page
fault handler. But when that synchronization in the exit of a task became a
nop, it caused the problem to appear.
Link: https://lore.kernel.org/r/20200429054857.66e8e333@oasis.local.home
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
e52aece880 | |
[ Upstream commit dcbd21c9fca5e954fd4e3d91884907eb6d47187e ] Fix a typo that resulted in an unnecessary double initialization to addr. Link: http://lkml.kernel.org/r/158779374968.6082.2337484008464939919.stgit@devnote2 Cc: Tom Zanussi <zanussi@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Fixes: c7411a1a126f ("tracing/kprobe: Check whether the non-suffixed symbol is notrace") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu
authored and
Greg Kroah-Hartman
commited |
84a50dc471 | |
commit 153031a301bb07194e9c37466cfce8eacb977621 upstream.
There was a recent change in blktrace.c that added a RCU protection to
`q->blk_trace` in order to fix a use-after-free issue during access.
However the change missed an edge case that can lead to dereferencing of
`bt` pointer even when it's NULL:
Coverity static analyzer marked this as a FORWARD_NULL issue with CID
1460458.
```
/kernel/trace/blktrace.c: 1904 in sysfs_blk_trace_attr_store()
1898 ret = 0;
1899 if (bt == NULL)
1900 ret = blk_trace_setup_queue(q, bdev);
1901
1902 if (ret == 0) {
1903 if (attr == &dev_attr_act_mask)
>>> CID 1460458: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "bt".
1904 bt->act_mask = value;
1905 else if (attr == &dev_attr_pid)
1906 bt->pid = value;
1907 else if (attr == &dev_attr_start_lba)
1908 bt->start_lba = value;
1909 else if (attr == &dev_attr_end_lba)
```
Added a reassignment with RCU annotation to fix the issue.
Fixes: c780e86dd48 ("blktrace: Protect q->blk_trace with RCU")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cengiz Can
authored and
Greg Kroah-Hartman
commited |
6d1444dbf9 | |
commit c780e86dd48ef6467a1146cf7d0fe1e05a635039 upstream. KASAN is reporting that __blk_add_trace() has a use-after-free issue when accessing q->blk_trace. Indeed the switching of block tracing (and thus eventual freeing of q->blk_trace) is completely unsynchronized with the currently running tracing and thus it can happen that the blk_trace structure is being freed just while __blk_add_trace() works on it. Protect accesses to q->blk_trace by RCU during tracing and make sure we wait for the end of RCU grace period when shutting down tracing. Luckily that is rare enough event that we can afford that. Note that postponing the freeing of blk_trace to an RCU callback should better be avoided as it could have unexpected user visible side-effects as debugfs files would be still existing for a short while block tracing has been shut down. Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711 CC: stable@vger.kernel.org Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reported-by: Tristan Madani <tristmd@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk> [bwh: Backported to 4.19: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Jan Kara
authored and
Greg Kroah-Hartman
commited |
473d7f5ed7 | |
commit 0bbe7f719985efd9adb3454679ecef0984cb6800 upstream.
Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger()
or snapshot_count_trigger()) when register_snapshot_trigger() has completed
registration but doesn't allocate buffer for 'snapshot' event trigger. In
the rare case, 'snapshot' operation always detects the lack of allocated
buffer so make register_snapshot_trigger() allocate buffer first.
trigger-snapshot.tc in kselftest reproduces the issue on slow vm:
-----------------------------------------------------------
cat trace
...
ftracetest-3028 [002] .... 236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036
<...>-2875 [003] .... 240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED ***
<...>-2875 [003] .... 240.460338: tracing_snapshot_instance_cond: *** stopping trace here! ***
-----------------------------------------------------------
Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com
Cc: stable@vger.kernel.org
Fixes:
Xiao Yang
authored and
Greg Kroah-Hartman
commited |
57f2a2ad73 | |
[ Upstream commit 6a13a0d7b4d1171ef9b80ad69abc37e1daa941b3 ]
Show maxactive parameter on kprobe_events.
This allows user to save the current configuration and
restore it without losing maxactive parameter.
Link: http://lkml.kernel.org/r/4762764a-6df7-bc93-ed60-e336146dce1f@gmail.com
Link: http://lkml.kernel.org/r/158503528846.22706.5549974121212526020.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes:
Masami Hiramatsu
authored and
Greg Kroah-Hartman
commited |
52f1c4257c | |
commit 78041c0c9e935d9ce4086feeff6c569ed88ddfd4 upstream.
The tracing seftests checks various aspects of the tracing infrastructure,
and one is filtering. If trace_printk() is active during a self test, it can
cause the filtering to fail, which will disable that part of the trace.
To keep the selftests from failing because of trace_printk() calls,
trace_printk() checks the variable tracing_selftest_running, and if set, it
does not write to the tracing buffer.
As some tracers were registered earlier in boot, the selftest they triggered
would fail because not all the infrastructure was set up for the full
selftest. Thus, some of the tests were post poned to when their
infrastructure was ready (namely file system code). The postpone code did
not set the tracing_seftest_running variable, and could fail if a
trace_printk() was added and executed during their run.
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
91495e01e8 | |
[ Upstream commit 6722b23e7a2ace078344064a9735fb73e554e9ef ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist # Available triggers: # traceon traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 6+1 records in 6+1 records out 206 bytes copied, 0.00027916 s, 738 kB/s Notice the printing of "# Available triggers:..." after the line. With the patch: # dd bs=30 skip=1 if=/sys/kernel/tracing/events/sched/sched_switch/trigger dd: /sys/kernel/tracing/events/sched/sched_switch/trigger: cannot skip to specified offset n traceoff snapshot stacktrace enable_event disable_event enable_hist disable_hist hist 2+1 records in 2+1 records out 88 bytes copied, 0.000526867 s, 167 kB/s It only prints the end of the file, and does not restart. Link: http://lkml.kernel.org/r/3c35ee24-dd3a-8119-9c19-552ed253388a@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Vasily Averin
authored and
Greg Kroah-Hartman
commited |
9ed840b756 | |
[ Upstream commit e4075e8bdffd93a9b6d6e1d52fabedceeca5a91b ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. Without patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id no pid 2+1 records in 2+1 records out 10 bytes copied, 0.000213285 s, 46.9 kB/s Notice the "id" followed by "no pid". With the patch: # dd bs=4 skip=1 if=/sys/kernel/tracing/set_ftrace_pid dd: /sys/kernel/tracing/set_ftrace_pid: cannot skip to specified offset id 0+1 records in 0+1 records out 3 bytes copied, 0.000202112 s, 14.8 kB/s Notice that it only prints "id" and not the "no pid" afterward. Link: http://lkml.kernel.org/r/4f87c6ad-f114-30bb-8506-c32274ce2992@virtuozzo.com https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Averin
authored and
Greg Kroah-Hartman
commited |
ddb005d906 | |
[ Upstream commit dfb6cd1e654315168e36d947471bd2a0ccd834ae ]
Looking through old emails in my INBOX, I came across a patch from Luis
Henriques that attempted to fix a race of two stat tracers registering the
same stat trace (extremely unlikely, as this is done in the kernel, and
probably doesn't even exist). The submitted patch wasn't quite right as it
needed to deal with clean up a bit better (if two stat tracers were the
same, it would have the same files).
But to make the code cleaner, all we needed to do is to keep the
all_stat_sessions_mutex held for most of the registering function.
Link: http://lkml.kernel.org/r/1410299375-20068-1-git-send-email-luis.henriques@canonical.com
Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
56d3793229 | |
[ Upstream commit afccc00f75bbbee4e4ae833a96c2d29a7259c693 ]
tracing_stat_init() was always returning '0', even on the error paths. It
now returns -ENODEV if tracing_init_dentry() fails or -ENOMEM if it fails
to created the 'trace_stat' debugfs directory.
Link: http://lkml.kernel.org/r/1410299381-20108-1-git-send-email-luis.henriques@canonical.com
Fixes:
Luis Henriques
authored and
Greg Kroah-Hartman
commited |
fb0085070a | |
[ Upstream commit 54a16ff6f2e50775145b210bcd94d62c3c2af117 ]
As function_graph tracer can run when RCU is not "watching", it can not be
protected by synchronize_rcu() it requires running a task on each CPU before
it can be freed. Calling schedule_on_each_cpu(ftrace_sync) needs to be used.
Link: https://lore.kernel.org/r/20200205131110.GT2935@paulmck-ThinkPad-P72
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
0948d6294d | |
[ Upstream commit 16052dd5bdfa16dbe18d8c1d4cde2ddab9d23177 ] Because the function graph tracer can execute in sections where RCU is not "watching", the rcu_dereference_sched() for the has needs to be open coded. This is fine because the RCU "flavor" of the ftrace hash is protected by its own RCU handling (it does its own little synchronization on every CPU and does not rely on RCU sched). Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
c03d235980 | |
[ Upstream commit fd0e6852c407dd9aefc594f54ddcc21d84803d3b ] Fix following instances of sparse error kernel/trace/ftrace.c:5667:29: error: incompatible types in comparison kernel/trace/ftrace.c:5813:21: error: incompatible types in comparison kernel/trace/ftrace.c:5868:36: error: incompatible types in comparison kernel/trace/ftrace.c:5870:25: error: incompatible types in comparison Use rcu_dereference_protected to dereference the newly annotated pointer. Link: http://lkml.kernel.org/r/20200205055701.30195-1-frextrite@gmail.com Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Amol Grover
authored and
Greg Kroah-Hartman
commited |
30afa80b0f | |
[ Upstream commit 24a9729f831462b1d9d61dc85ecc91c59037243f ] Fix following instances of sparse error kernel/trace/ftrace.c:5664:29: error: incompatible types in comparison kernel/trace/ftrace.c:5785:21: error: incompatible types in comparison kernel/trace/ftrace.c:5864:36: error: incompatible types in comparison kernel/trace/ftrace.c:5866:25: error: incompatible types in comparison Use rcu_dereference_protected to access the __rcu annotated pointer. Link: http://lkml.kernel.org/r/20200201072703.17330-1-frextrite@gmail.com Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Amol Grover <frextrite@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Amol Grover
authored and
Greg Kroah-Hartman
commited |
f144ad2e84 | |
commit 64ae572bc7d0060429e40e1c8d803ce5eb31a0d6 upstream.
Reading the sched_cmdline_ref and sched_tgid_ref initial state within
tracing_start_sched_switch without holding the sched_register_mutex is
racy against concurrent updates, which can lead to tracepoint probes
being registered more than once (and thus trigger warnings within
tracepoint.c).
[ May be the fix for this bug ]
Link: https://lore.kernel.org/r/000000000000ab6f84056c786b93@google.com
Link: http://lkml.kernel.org/r/20190817141208.15226-1-mathieu.desnoyers@efficios.com
Cc: stable@vger.kernel.org
CC: Steven Rostedt (VMware) <rostedt@goodmis.org>
CC: Joel Fernandes (Google) <joel@joelfernandes.org>
CC: Peter Zijlstra <peterz@infradead.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Paul E. McKenney <paulmck@linux.ibm.com>
Reported-by: syzbot+774fddf07b7ab29a1e55@syzkaller.appspotmail.com
Fixes:
Mathieu Desnoyers
authored and
Greg Kroah-Hartman
commited |
62bfa26e4d | |
commit 8bcebc77e85f3d7536f96845a0fe94b1dddb6af0 upstream.
While working on a tool to convert SQL syntex into the histogram language of
the kernel, I discovered the following bug:
# echo 'first u64 start_time u64 end_time pid_t pid u64 delta' >> synthetic_events
# echo 'hist:keys=pid:start=common_timestamp' > events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp-$start,start2=$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger
Would not display any histograms in the sched_switch histogram side.
But if I were to swap the location of
"delta=common_timestamp-$start" with "start2=$start"
Such that the last line had:
# echo 'hist:keys=next_pid:start2=$start,delta=common_timestamp-$start:onmatch(sched.sched_waking).trace(first,$start2,common_timestamp,next_pid,$delta)' > events/sched/sched_switch/trigger
The histogram works as expected.
What I found out is that the expressions clear out the value once it is
resolved. As the variables are resolved in the order listed, when
processing:
delta=common_timestamp-$start
The $start is cleared. When it gets to "start2=$start", it errors out with
"unresolved symbol" (which is silent as this happens at the location of the
trace), and the histogram is dropped.
When processing the histogram for variable references, instead of adding a
new reference for a variable used twice, use the same reference. That way,
not only is it more efficient, but the order will no longer matter in
processing of the variables.
From Tom Zanussi:
"Just to clarify some more about what the problem was is that without
your patch, we would have two separate references to the same variable,
and during resolve_var_refs(), they'd both want to be resolved
separately, so in this case, since the first reference to start wasn't
part of an expression, it wouldn't get the read-once flag set, so would
be read normally, and then the second reference would do the read-once
read and also be read but using read-once. So everything worked and
you didn't see a problem:
from: start2=$start,delta=common_timestamp-$start
In the second case, when you switched them around, the first reference
would be resolved by doing the read-once, and following that the second
reference would try to resolve and see that the variable had already
been read, so failed as unset, which caused it to short-circuit out and
not do the trigger action to generate the synthetic event:
to: delta=common_timestamp-$start,start2=$start
With your patch, we only have the single resolution which happens
correctly the one time it's resolved, so this can't happen."
Link: https://lore.kernel.org/r/20200116154216.58ca08eb@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
ce28d66405 | |
commit de40f033d4e84e843d6a12266e3869015ea9097c upstream. Have create_var_ref() manage the hist trigger's var_ref list, rather than having similar code doing it in multiple places. This cleans up the code and makes sure var_refs are always accounted properly. Also, document the var_ref-related functions to make what their purpose clearer. Link: http://lkml.kernel.org/r/05ddae93ff514e66fc03897d6665231892939913.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Tom Zanussi
authored and
Greg Kroah-Hartman
commited |
cbb042fd87 | |
commit 656fe2ba85e81d00e4447bf77b8da2be3c47acb2 upstream. Since every var ref for a trigger has an entry in the var_ref[] array, use that to destroy the var_refs, instead of piecemeal via the field expressions. This allows us to avoid having to keep and treat differently separate lists for the action-related references, which future patches will remove. Link: http://lkml.kernel.org/r/fad1a164f0e257c158e70d6eadbf6c586e04b2a2.1545161087.git.tom.zanussi@linux.intel.com Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tom Zanussi
authored and
Greg Kroah-Hartman
commited |
836717841a | |
commit aeed8aa3874dc15b9d82a6fe796fd7cfbb684448 upstream.
With CONFIG_PROVE_RCU_LIST, I had many suspicious RCU warnings
when I ran ftracetest trigger testcases.
-----
# dmesg -c > /dev/null
# ./ftracetest test.d/trigger
...
# dmesg | grep "RCU-list traversed" | cut -f 2 -d ] | cut -f 2 -d " "
kernel/trace/trace_events_hist.c:6070
kernel/trace/trace_events_hist.c:1760
kernel/trace/trace_events_hist.c:5911
kernel/trace/trace_events_trigger.c:504
kernel/trace/trace_events_hist.c:1810
kernel/trace/trace_events_hist.c:3158
kernel/trace/trace_events_hist.c:3105
kernel/trace/trace_events_hist.c:5518
kernel/trace/trace_events_hist.c:5998
kernel/trace/trace_events_hist.c:6019
kernel/trace/trace_events_hist.c:6044
kernel/trace/trace_events_trigger.c:1500
kernel/trace/trace_events_trigger.c:1540
kernel/trace/trace_events_trigger.c:539
kernel/trace/trace_events_trigger.c:584
-----
I investigated those warnings and found that the RCU-list
traversals in event trigger and hist didn't need to use
RCU version because those were called only under event_mutex.
I also checked other RCU-list traversals related to event
trigger list, and found that most of them were called from
event_hist_trigger_func() or hist_unregister_trigger() or
register/unregister functions except for a few cases.
Replace these unneeded RCU-list traversals with normal list
traversal macro and lockdep_assert_held() to check the
event_mutex is held.
Link: http://lkml.kernel.org/r/157680910305.11685.15110237954275915782.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes:
Masami Hiramatsu
authored and
Greg Kroah-Hartman
commited |
47eb3574d0 | |
commit b8299d362d0837ae39e87e9019ebe6b736e0f035 upstream.
On some archs with some configurations, MCOUNT_INSN_SIZE is not defined, and
this makes the stack tracer fail to compile. Just define it to zero in this
case.
Link: https://lore.kernel.org/r/202001020219.zvE3vsty%lkp@intel.com
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
c919096552 | |
commit 50f9ad607ea891a9308e67b81f774c71736d1098 upstream.
In the function, if register_trace_sched_migrate_task() returns error,
sched_switch/sched_wakeup_new/sched_wakeup won't unregister. That is
why fail_deprobe_sched_switch was added.
Link: http://lkml.kernel.org/r/20191231133530.2794-1-pilgrimtao@gmail.com
Cc: stable@vger.kernel.org
Fixes:
Kaitao Cheng
authored and
Greg Kroah-Hartman
commited |
5ab4bb7b40 | |
commit e31f7939c1c27faa5d0e3f14519eaf7c89e8a69d upstream. The ftrace_profile->counter is unsigned long and do_div truncates it to 32 bits, which means it can test non-zero and be truncated to zero for division. Fix this issue by using div64_ul() instead. Link: http://lkml.kernel.org/r/20200103030248.14516-1-wenyang@linux.alibaba.com Cc: stable@vger.kernel.org Fixes: 
Wen Yang
authored and
Greg Kroah-Hartman
commited |
010a7e846d | |
commit fe6e096a5bbf73a142f09c72e7aa2835026eb1a3 upstream.
At least on PA-RISC and s390 synthetic histogram triggers are failing
selftests because trace_event_raw_event_synth() always writes a 64 bit
values, but the reader expects a field->size sized value. On little endian
machines this doesn't hurt, but on big endian this makes the reader always
read zero values.
Link: http://lore.kernel.org/linux-trace-devel/20191218074427.96184-4-svens@linux.ibm.com
Cc: stable@vger.kernel.org
Fixes:
Sven Schnelle
authored and
Greg Kroah-Hartman
commited |
1c662483c5 | |
commit 106f41f5a302cb1f36c7543fae6a05de12e96fa4 upstream.
The compare functions of the histogram code would be specific for the size
of the value being compared (byte, short, int, long long). It would
reference the value from the array via the type of the compare, but the
value was stored in a 64 bit number. This is fine for little endian
machines, but for big endian machines, it would end up comparing zeros or
all ones (depending on the sign) for anything but 64 bit numbers.
To fix this, first derference the value as a u64 then convert it to the type
being compared.
Link: http://lkml.kernel.org/r/20191211103557.7bed6928@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes:
Steven Rostedt (VMware)
authored and
Greg Kroah-Hartman
commited |
0c81595930 | |
commit 79e65c27f09683fbb50c33acab395d0ddf5302d2 upstream.
When failing in the allocation of filter_item, process_system_preds()
goes to fail_mem, where the allocated filter is freed.
However, this leads to memory leak of filter->filter_string and
filter->prog, which is allocated before and in process_preds().
This bug has been detected by kmemleak as well.
Fix this by changing kfree to __free_fiter.
unreferenced object 0xffff8880658007c0 (size 32):
comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
hex dump (first 32 bytes):
63 6f 6d 6d 6f 6e 5f 70 69 64 20 20 3e 20 31 30 common_pid > 10
00 00 00 00 00 00 00 00 65 73 00 00 00 00 00 00 ........es......
backtrace:
[<0000000067441602>] kstrdup+0x2d/0x60
[<00000000141cf7b7>] apply_subsystem_event_filter+0x378/0x932
[<000000009ca32334>] subsystem_filter_write+0x5a/0x90
[<0000000072da2bee>] vfs_write+0xe1/0x240
[<000000004f14f473>] ksys_write+0xb4/0x150
[<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
[<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888060c22d00 (size 64):
comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 e8 d7 41 80 88 ff ff ...........A....
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000b8c1b109>] process_preds+0x243/0x1820
[<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932
[<000000009ca32334>] subsystem_filter_write+0x5a/0x90
[<0000000072da2bee>] vfs_write+0xe1/0x240
[<000000004f14f473>] ksys_write+0xb4/0x150
[<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
[<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
unreferenced object 0xffff888041d7e800 (size 512):
comm "bash", pid 579, jiffies 4295096372 (age 17.752s)
hex dump (first 32 bytes):
70 bc 85 97 ff ff ff ff 0a 00 00 00 00 00 00 00 p...............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000001e04af34>] process_preds+0x71a/0x1820
[<000000003972c7f0>] apply_subsystem_event_filter+0x3be/0x932
[<000000009ca32334>] subsystem_filter_write+0x5a/0x90
[<0000000072da2bee>] vfs_write+0xe1/0x240
[<000000004f14f473>] ksys_write+0xb4/0x150
[<00000000a968b4a0>] do_syscall_64+0x6d/0x1e0
[<000000001a189f40>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Link: http://lkml.kernel.org/r/20191211091258.11310-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes:
Keita Suzuki
authored and
Greg Kroah-Hartman
commited |
8595e2aadd | |
commit 3a53acf1d9bea11b57c1f6205e3fe73f9d8a3688 upstream.
Task T2 Task T3
trace_options_core_write() subsystem_open()
mutex_lock(trace_types_lock) mutex_lock(event_mutex)
set_tracer_flag()
trace_event_enable_tgid_record() mutex_lock(trace_types_lock)
mutex_lock(event_mutex)
This gives a circular dependency deadlock between trace_types_lock and
event_mutex. To fix this invert the usage of trace_types_lock and
event_mutex in trace_options_core_write(). This keeps the sequence of
lock usage consistent.
Link: http://lkml.kernel.org/r/0101016eef175e38-8ca71caf-a4eb-480d-a1e6-6f0bbc015495-000000@us-west-2.amazonses.com
Cc: stable@vger.kernel.org
Fixes:
Prateek Sood
authored and
Greg Kroah-Hartman
commited |
0e48d030e3 | |
[ Upstream commit c7411a1a126f649be71526a36d4afac9e5aefa13 ]
Check whether the non-suffixed symbol is notrace, since suffixed
symbols are generated by the compilers for optimization. Based on
these suffixed symbols, notrace check might not work because
some of them are just a partial code of the original function.
(e.g. cold-cache (unlikely) code is separated from original
function as FUNCTION.cold.XX)
For example, without this fix,
# echo p device_add.cold.67 > /sys/kernel/debug/tracing/kprobe_events
sh: write error: Invalid argument
# cat /sys/kernel/debug/tracing/error_log
[ 135.491035] trace_kprobe: error: Failed to register probe event
Command: p device_add.cold.67
^
# dmesg | tail -n 1
[ 135.488599] trace_kprobe: Could not probe notrace function device_add.cold.67
With this,
# echo p device_add.cold.66 > /sys/kernel/debug/tracing/kprobe_events
# cat /sys/kernel/debug/kprobes/list
ffffffff81599de9 k device_add.cold.66+0x0 [DISABLED]
Actually, kprobe blacklist already did similar thing,
see within_kprobe_blacklist().
Link: http://lkml.kernel.org/r/157233790394.6706.18243942030937189679.stgit@devnote2
Fixes:
Masami Hiramatsu
authored and
Greg Kroah-Hartman
commited |
49e9a5395c | |
[ Upstream commit 6ee40511cb838f9ced002dff7131bca87e3ccbdd ] Fail to allocate memory for tgid_map, because it requires order-6 page. detail as: c3 sh: page allocation failure: order:6, mode:0x140c0c0(GFP_KERNEL), nodemask=(null) c3 sh cpuset=/ mems_allowed=0 c3 CPU: 3 PID: 5632 Comm: sh Tainted: G W O 4.14.133+ #10 c3 Hardware name: Generic DT based system c3 Backtrace: c3 [<c010bdbc>] (dump_backtrace) from [<c010c08c>](show_stack+0x18/0x1c) c3 [<c010c074>] (show_stack) from [<c0993c54>](dump_stack+0x84/0xa4) c3 [<c0993bd0>] (dump_stack) from [<c0229858>](warn_alloc+0xc4/0x19c) c3 [<c0229798>] (warn_alloc) from [<c022a6e4>](__alloc_pages_nodemask+0xd18/0xf28) c3 [<c02299cc>] (__alloc_pages_nodemask) from [<c0248344>](kmalloc_order+0x20/0x38) c3 [<c0248324>] (kmalloc_order) from [<c0248380>](kmalloc_order_trace+0x24/0x108) c3 [<c024835c>] (kmalloc_order_trace) from [<c01e6078>](set_tracer_flag+0xb0/0x158) c3 [<c01e5fc8>] (set_tracer_flag) from [<c01e6404>](trace_options_core_write+0x7c/0xcc) c3 [<c01e6388>] (trace_options_core_write) from [<c0278b1c>](__vfs_write+0x40/0x14c) c3 [<c0278adc>] (__vfs_write) from [<c0278e10>](vfs_write+0xc4/0x198) c3 [<c0278d4c>] (vfs_write) from [<c027906c>](SyS_write+0x6c/0xd0) c3 [<c0279000>] (SyS_write) from [<c01079a0>](ret_fast_syscall+0x0/0x54) Switch to use kvcalloc to avoid unexpected allocation failures. Link: http://lkml.kernel.org/r/1571888070-24425-1-git-send-email-chunyan.zhang@unisoc.com Signed-off-by: Yuming Han <yuming.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org> 
Yuming Han
authored and
Greg Kroah-Hartman
commited |
22508003fc | |
[ Upstream commit fc800a10be26017f8f338bc8e500d48e3e6429d9 ]
synthetic event is using synth_event_mutex for protecting
synth_event_list, and event_trigger_write() path acquires
locks as below order.
event_trigger_write(event_mutex)
->trigger_process_regex(trigger_cmd_mutex)
->event_hist_trigger_func(synth_event_mutex)
On the other hand, synthetic event creation and deletion paths
call trace_add_event_call() and trace_remove_event_call()
which acquires event_mutex. In that case, if we keep the
synth_event_mutex locked while registering/unregistering synthetic
events, its dependency will be inversed.
To avoid this issue, current synthetic event is using a 2 phase
process to create/delete events. For example, it searches existing
events under synth_event_mutex to check for event-name conflicts, and
unlocks synth_event_mutex, then registers a new event under event_mutex
locked. Finally, it locks synth_event_mutex and tries to add the
new event to the list. But it can introduce complexity and a chance
for name conflicts.
To solve this simpler, this introduces trace_add_event_call_nolock()
and trace_remove_event_call_nolock() which don't acquire
event_mutex inside. synthetic event can lock event_mutex before
synth_event_mutex to solve the lock dependency issue simpler.
Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu
authored and
Greg Kroah-Hartman
commited |
dee3f77032 | |
[ Upstream commit 9fa8c9c647be624e91b09ecffa7cd97ee0600b40 ]
In the format of synthetic events, the "gfp_t" is shown as "signed:1",
but in fact the "gfp_t" is "unsigned", should be shown as "signed:0".
The issue can be reproduced by the following commands:
echo 'memlatency u64 lat; unsigned int order; gfp_t gfp_flags; int migratetype' > /sys/kernel/debug/tracing/synthetic_events
cat /sys/kernel/debug/tracing/events/synthetic/memlatency/format
name: memlatency
ID: 2233
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:u64 lat; offset:8; size:8; signed:0;
field:unsigned int order; offset:16; size:4; signed:0;
field:gfp_t gfp_flags; offset:24; size:4; signed:1;
field:int migratetype; offset:32; size:4; signed:1;
print fmt: "lat=%llu, order=%u, gfp_flags=%x, migratetype=%d", REC->lat, REC->order, REC->gfp_flags, REC->migratetype
Link: http://lkml.kernel.org/r/20191018012034.6404-1-zhengjun.xing@linux.intel.com
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengjun Xing
authored and
Greg Kroah-Hartman
commited |
fa18f803d1 |