mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-18 21:58:11 +07:00
| SHA1 | ||
|---|---|---|
This patch has changes to w1.h/w1.c generic files to add (optional) hwmon support structures. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Jaghathiswari Rankappagounder Natarajan
authored and
 Greg Kroah-Hartman
commited |
2eb7954809 | |
The value passed into the perf.data file for the CONFIGR register in ETMv4 was incorrectly being set to the command line options/ETMv3 value. Adds bit definitions and function to remap this value to the correct ETMv4 CONFIGR bit values for all selected options. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Mike Leach
authored and
Greg Kroah-Hartman
commited |
df770ff058 | |
missing err.h header file can cause simillar errors like below in some configurations. "error: implicit declaration of function 'ERR_PTR' [-Werror=implicit-function-declaration]" This adds the missing include to ensure we can always include the header. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Srinivas Kandagatla
authored and
Greg Kroah-Hartman
commited |
4da69f49e7 | |
This function does a quick and easy read of an u32 value without any kind of resource management code on the consumer side. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Leonard Crestez
authored and
Greg Kroah-Hartman
commited |
d026d70a2e | |
o Make endian clean, make HW-endianness configurable. o Use ioread*, iowrite* instead of __raw_readb,__raw_writeb to also use memory-barriers when accessing HW-registers. We do not want reordering to happen here. Both changes are tightly coupled, so I do them in one patch Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Johannes Poehlmann
authored and
Greg Kroah-Hartman
commited |
baa8055de0 | |
Replace incorrect register offsett calculation by direct configuration of bus_shift in mfd-cell. Indirect definition of address-shift by resource size was unobvious and was wrong (should have used a binary log). Signed-off-by: Johannes Poehlmann <johannes.poehlmann@izt-labs.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Poehlmann
authored and
Greg Kroah-Hartman
commited |
242b476f82 | |
Required for __must_check. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Ulrich Hecht
authored and
Greg Kroah-Hartman
commited |
d3cc8ca3ab | |
Detailed description for this pull request: 1. Add new 'extcon-usbc-cros-ec.c' driver - ChromeOS Embedded Controller extcon driver supports the detection of the Display Port (EXTCON_DISP_DP) through USB C-type and contol it. 2. Update extcon core - Modify the description for both functions and structures in order to improve the readability and give the more correct guide about the role of functions because there are different explanation even if the same arguments. - Keep the indentation with tab instead of space - Remove the following deprecated extcon API. The deprecated API are exchanged on all of linux tree. : extcon_get_cable_state_() -> extcon_get_state() : extcon_set_cable_state_() -> extcon_set_state_sync() 3. Include the two immutable branch as following: - ib-extcon-mfd-4.14 for the 'extcon-ubsc-cros-ec.c' driver because the patches of 'extcon-ubsc-cros-ec.c' touch the MFD directory. - ib-extcon-usb-phy-4.14 for removing the deprecated extcon API because the usb/phy driver usese the deprecated extcon API. So, this immutable branch alters the extcon API and then remove them from extcon. 4. Fix minor issue of extcon driver - Fix the MHL detection on extcon-max77693.c - Convert to using %pOF instead of full_name on extcon.c - Add 'const' kerywod for acpi_device_id on extcon-intel-int3496.c -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJZn3XJAAoJEJzN3yze689Tat0P/jnTEqEleNCDBYx4SW/c7ilO KCNXEEfgtD0sIon3KPt6Zbc0Na+QmD7DSrdlPsc0864k7Vrb/M+bshETtrxC/fQi WW8SaRHNLePCH0UnayUoukYtlui1zWbfdJ8HLQqfQILQy2LVIaA7famL8wuHHXJR 4zl69EQPTODBKt9akHjQ2pLuucN/6KAl4QcBje4eY/c+mMpyjo6Ivi6vRCFpL66T J+rBobTvRoMUwTaIlmquwoVgdMpk2DA9NXOypGT3slIeIqfyUf+7TUtBGbVrCmvj o+zVap5pcZhf6KXfi4OZUbDdgXpIn2V1p5ztAq0JlW2LcyguZ1bZs3EJAsyRS0aS 3ykru6e5KqH4vcMwcxkgatPKhSSPyC93ETdvx55IF7uP6qH8ym1hgtDKr7FrPW0+ Md/gO8YPgFMZRUG2rAbCJO/zFbS4aNh0X6eOOCmsraxy0IQBE/p41zw8Tp7Jgupv oxV1beXyB2DLBCGkj12baGUzePZent/vse3dPbl8YHiubQCgAa4u4NO70EU/T9W+ 3PeJEK4o3vw9aDBGTMINRUSMKQGCAkf4VL+wyBn8k/LTYWPP1YsA1+beX1E184vB vS0nnjhJP8VphfAAx5+eYnep6HPTUPwlyi9CR/vbSG8HmPkfIDslQ8700VsmsEkn 6mMDK+pd9FGjs6nwwO5d =oQMu -----END PGP SIGNATURE----- Merge tag 'extcon-next-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next Chanwoo writes: Update extcon for 4.14 Detailed description for this pull request: 1. Add new 'extcon-usbc-cros-ec.c' driver - ChromeOS Embedded Controller extcon driver supports the detection of the Display Port (EXTCON_DISP_DP) through USB C-type and contol it. 2. Update extcon core - Modify the description for both functions and structures in order to improve the readability and give the more correct guide about the role of functions because there are different explanation even if the same arguments. - Keep the indentation with tab instead of space - Remove the following deprecated extcon API. The deprecated API are exchanged on all of linux tree. : extcon_get_cable_state_() -> extcon_get_state() : extcon_set_cable_state_() -> extcon_set_state_sync() 3. Include the two immutable branch as following: - ib-extcon-mfd-4.14 for the 'extcon-ubsc-cros-ec.c' driver because the patches of 'extcon-ubsc-cros-ec.c' touch the MFD directory. - ib-extcon-usb-phy-4.14 for removing the deprecated extcon API because the usb/phy driver usese the deprecated extcon API. So, this immutable branch alters the extcon API and then remove them from extcon. 4. Fix minor issue of extcon driver - Fix the MHL detection on extcon-max77693.c - Convert to using %pOF instead of full_name on extcon.c - Add 'const' kerywod for acpi_device_id on extcon-intel-int3496.c
Greg Kroah-Hartman
commited |
9f57ed095f | |
eeprom_93xx46_platform_data struct has a 'struct gpio_desc' type member, so it is better to include <linux/gpio/consumer.h>, which provides 'struct gpio_desc' type. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Fabio Estevam
authored and
Greg Kroah-Hartman
commited |
e055257357 | |
The initial FPGA may require programming before it is useful. Signed-off-by: Federico Vaga <federico.vaga@cern.ch> Tested-by: Pat Riehecky <riehecky@fnal.gov> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Federico Vaga
authored and
Greg Kroah-Hartman
commited |
9c0dda1495 | |
Permit use of either fmc_device_register_n or fmc_device_register_n_gw depending on the type of device in use. Signed-off-by: Federico Vaga <federico.vaga@cern.ch> Tested-by: Pat Riehecky <riehecky@fnal.gov> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Federico Vaga
authored and
Greg Kroah-Hartman
commited |
15b1b0f0d8 | |
Driver should not call fmc_sdb_dump() anymore. (actually they can but the operation is not supported, so it will print an error message) Signed-off-by: Federico Vaga <federico.vaga@cern.ch> Tested-by: Pat Riehecky <riehecky@fnal.gov> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Federico Vaga
authored and
Greg Kroah-Hartman
commited |
2071a3e94a | |
This gave us more freedom to change/add/remove operations without recompiling all device driver. Typically, Carrier board implement the fmc operations, so they will not use these helpers. Signed-off-by: Federico Vaga <federico.vaga@cern.ch> Tested-by: Pat Riehecky <riehecky@fnal.gov> Acked-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Federico Vaga
authored and
Greg Kroah-Hartman
commited |
9f757f4152 | |
Return stack is a programmable option on some ETM and PTM hardware. Adds the option flags to enable this from the perf event command line. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Leach
authored and
Greg Kroah-Hartman
commited |
b97971bee5 | |
We want the binder fix in here as well for testing and merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman
commited |
9749c37275 | |
Another fix, this time in common IOMMU sysfs code - In the conversion from the old iommu sysfs-code to the iommu_device_register interface, I missed to update the release path for the struct device associated with an IOMMU. It freed the 'struct device', which was a pointer before, but is now embedded in another struct. Freeing from the middle of allocated memory had all kinds of nasty side effects when an IOMMU was unplugged. Unfortunatly nobody unplugged and IOMMU until now, so this was not discovered earlier. The fix is to make the 'struct device' a pointer again. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJZor4gAAoJECvwRC2XARrj3CUP/3/rhNhHfuvq0C+Nz+ikzZSg xavSSbZztC3SQnr9bgky5TP8Djf9zXzD6DiEGhJoOr98K7R/nvFyaR1NfYnIwHi3 ofngfOcEuuNzInO9L0huHlkqlbUxEwcWTi/QbrFm+W2iL6vOgYejlspFLXAPviDo BlSzJTHzeyXJPZqKDuKB2oO+fVk/xor7KEelsh5fsRrBwFl/JclH5SwIusv4ORfJ sY+02Z8MfLx5+NUvSDj/APoGOlYn0T+XipvduIp2wDtQBmDvN332KWqB1JnAKVdM j27l0BnHABbe5TjQMzj3opAl2v2ZsUqRzolfJdvrh8Gr3gLT1LyMn8A3CRzelBDI jzNsPp9BG2z8enUrppy6yZwv95uxEvNrwrc7jmX46UK12Gf7eBlNGLSe4u+5Ctj5 5e6Eui5y5g/4/DW+BbXt+DjYZHwqJdC1+KAI9XR6sMPRweEmdLhclqgtYhTjGGX9 w2swhpWjcZ7bte8EF/Mlg2Dl6//WTcqFBeyZbHe+HwzWP33EIXpHdfwJCtWpfD/+ lvdDvI2DUrDUiMVcJwnYrWbRuHtdE/fjI0BtmYA01JL0Oe4+kxB3vS4MnlmH8ENc i7KThAEDdyrqeX1DTPmef1YTuhprGAB/pj2GYGe/93QDXMDOPMG3pvYm6Up02MzD a2UNL/JvCEQloABXFyIM =/lXQ -----END PGP SIGNATURE----- Merge tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "Another fix, this time in common IOMMU sysfs code. In the conversion from the old iommu sysfs-code to the iommu_device_register interface, I missed to update the release path for the struct device associated with an IOMMU. It freed the 'struct device', which was a pointer before, but is now embedded in another struct. Freeing from the middle of allocated memory had all kinds of nasty side effects when an IOMMU was unplugged. Unfortunatly nobody unplugged and IOMMU until now, so this was not discovered earlier. The fix is to make the 'struct device' a pointer again" * tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Fix wrong freeing of iommu_device->dev 
Linus Torvalds
commited |
2c25833c42 | |
Here are few small staging driver fixes, and some more IIO driver fixes for 4.13-rc7. Nothing major, just resolutions for some reported problems. All of these have been in linux-next with no reported problems. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWaJy4A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ynWcACgxpL4f0LeykFayPprtrciey5OOGoAnAhfG7Lq LCuaIj8AtUVfwoWXVwBA =RSsO -----END PGP SIGNATURE----- Merge tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio fixes from Greg KH: "Here are few small staging driver fixes, and some more IIO driver fixes for 4.13-rc7. Nothing major, just resolutions for some reported problems. All of these have been in linux-next with no reported problems" * tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: magnetometer: st_magn: remove ihl property for LSM303AGR iio: magnetometer: st_magn: fix status register address for LSM303AGR iio: hid-sensor-trigger: Fix the race with user space powering up sensors iio: trigger: stm32-timer: fix get trigger mode iio: imu: adis16480: Fix acceleration scale factor for adis16480 PATCH] iio: Fix some documentation warnings staging: rtl8188eu: add RNX-N150NUB support Revert "staging: fsl-mc: be consistent when checking strcmp() return" iio: adc: stm32: fix common clock rate iio: adc: ina219: Avoid underflow for sleeping time iio: trigger: stm32-timer: add enable attribute iio: trigger: stm32-timer: fix get/set down count direction iio: trigger: stm32-timer: fix write_raw return value iio: trigger: stm32-timer: fix quadrature mode get routine iio: bmp280: properly initialize device for humidity reading
Linus Torvalds
commited |
c3c162635f | |
We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit
Linus Torvalds
commited |
0cc3b0ec23 | |
Pull block fixes from Jens Axboe:
"A small batch of fixes that should be included for the 4.13 release.
This contains:
- Revert of the 4k loop blocksize support. Even with a recent batch
of 4 fixes, we're still not really happy with it. Rather than be
stuck with an API issue, let's revert it and get it right for 4.14.
- Trivial patch from Bart, adding a few flags to the blk-mq debugfs
exports that were added in this release, but not to the debugfs
parts.
- Regression fix for bsg, fixing a potential kernel panic. From
Benjamin.
- Tweak for the blk throttling, improving how we account discards.
From Shaohua"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq-debugfs: Add names for recently added flags
bsg-lib: fix kernel panic resulting from missing allocation of reply-buffer
Revert "loop: support 4k physical blocksize"
blk-throttle: cap discard request size
Linus Torvalds
commited |
0b31c3ec1b | |
The implementation of TIOCGPTPEER has two issues.
When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong
vfsmount is passed to dentry_open. Which results in the kernel displaying
the wrong pathname for the peer.
The second is simply by caching the vfsmount and dentry of the peer it leaves
them open, in a way they were not previously Which because of the inreased
reference counts can cause unnecessary behaviour differences resulting in
regressions.
To fix these move the ioctl into tty_io.c at a generic level allowing
the ioctl to have access to the struct file on which the ioctl is
being called. This allows the path of the slave to be derived when
opening the slave through TIOCGPTPEER instead of requiring the path to
the slave be cached. Thus removing the need for caching the path.
A new function devpts_ptmx_path is factored out of devpts_acquire and
used to implement a function devpts_mntget. The new function devpts_mntget
takes a filp to perform the lookup on and fsi so that it can confirm
that the superblock that is found by devpts_ptmx_path is the proper superblock.
v2: Lots of fixes to make the code actually work
v3: Suggestions by Linus
- Removed the unnecessary initialization of filp in ptm_open_peer
- Simplified devpts_ptmx_path as gotos are no longer required
[ This is the fix for the issue that was reverted in commit
Eric W. Biederman
authored and
Linus Torvalds
commited |
311fc65c9f | |
Since we split the scsi_request out of struct request bsg fails to
provide a reply-buffer for the drivers. This was done via the pointer
for sense-data, that is not preallocated anymore.
Failing to allocate/assign it results in illegal dereferences because
LLDs use this pointer unquestioned.
An example panic on s390x, using the zFCP driver, looks like this (I had
debugging on, otherwise NULL-pointer dereferences wouldn't even panic on
s390x):
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6403
Fault in home space mode while using kernel ASCE.
AS:0000000001590007 R3:0000000000000024
Oops: 0038 ilc:2 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in: <Long List>
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.12.0-bsg-regression+ #3
Hardware name: IBM 2964 N96 702 (z/VM 6.4.0)
task: 0000000065cb0100 task.stack: 0000000065cb4000
Krnl PSW : 0704e00180000000 000003ff801e4156 (zfcp_fc_ct_els_job_handler+0x16/0x58 [zfcp])
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 0000000000000001 000000005fa9d0d0 000000005fa9d078 0000000000e16866
000003ff00000290 6b6b6b6b6b6b6b6b 0000000059f78f00 000000000000000f
00000000593a0958 00000000593a0958 0000000060d88800 000000005ddd4c38
0000000058b50100 07000000659cba08 000003ff801e8556 00000000659cb9a8
Krnl Code: 000003ff801e4146: e31020500004 lg %r1,80(%r2)
000003ff801e414c: 58402040 l %r4,64(%r2)
#000003ff801e4150: e35020200004 lg %r5,32(%r2)
>000003ff801e4156: 50405004 st %r4,4(%r5)
000003ff801e415a: e54c50080000 mvhi 8(%r5),0
000003ff801e4160: e33010280012 lt %r3,40(%r1)
000003ff801e4166: a718fffb lhi %r1,-5
000003ff801e416a: 1803 lr %r0,%r3
Call Trace:
([<000003ff801e8556>] zfcp_fsf_req_complete+0x726/0x768 [zfcp])
[<000003ff801ea82a>] zfcp_fsf_reqid_check+0x102/0x180 [zfcp]
[<000003ff801eb980>] zfcp_qdio_int_resp+0x230/0x278 [zfcp]
[<00000000009b91b6>] qdio_kick_handler+0x2ae/0x2c8
[<00000000009b9e3e>] __tiqdio_inbound_processing+0x406/0xc10
[<00000000001684c2>] tasklet_action+0x15a/0x1d8
[<0000000000bd28ec>] __do_softirq+0x3ec/0x848
[<00000000001675a4>] irq_exit+0x74/0xf8
[<000000000010dd6a>] do_IRQ+0xba/0xf0
[<0000000000bd19e8>] io_int_handler+0x104/0x2d4
[<00000000001033b6>] enabled_wait+0xb6/0x188
([<000000000010339e>] enabled_wait+0x9e/0x188)
[<000000000010396a>] arch_cpu_idle+0x32/0x50
[<0000000000bd0112>] default_idle_call+0x52/0x68
[<00000000001cd0fa>] do_idle+0x102/0x188
[<00000000001cd41e>] cpu_startup_entry+0x3e/0x48
[<0000000000118c64>] smp_start_secondary+0x11c/0x130
[<0000000000bd2016>] restart_int_handler+0x62/0x78
[<0000000000000000>] (null)
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<000003ff801e41d6>] zfcp_fc_ct_job_handler+0x3e/0x48 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt
This patch moves bsg-lib to allocate and setup struct bsg_job ahead of
time, including the allocation of a buffer for the reply-data.
This means, struct bsg_job is not allocated separately anymore, but as part
of struct request allocation - similar to struct scsi_cmd. Reflect this in
the function names that used to handle creation/destruction of struct
bsg_job.
Reported-by: Steffen Maier <maier@linux.vnet.ibm.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Fixes:
Benjamin Block
authored and
 Jens Axboe
commited |
50b4d48552 | |
This reverts commit
Linus Torvalds
commited |
143c97cc65 | |
Pull networking fixes from David Miller:
1) Fix IGMP handling wrt VRF, from David Ahern.
2) Fix timer access to freed object in dccp, from Eric Dumazet.
3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
triggerable by userspace. Also from Eric Dumazet.
4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
King.
5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.
6) Fix use after free in TIPC, from Eric Dumazet.
7) When replacing a route in ipv6 we need to reset the round robin
pointer, from Wei Wang.
8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
relaxed ordering changes, from Thierry Redding. I made sure to get
an explicit ACK from Bjorn this time around :-)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: repair fib6 tree in failure case
net_sched: fix order of queue length updates in qdisc_replace()
tools lib bpf: improve warning
switchdev: documentation: minor typo fixes
bpf, doc: also add s390x as arch to sysctl description
net: sched: fix NULL pointer dereference when action calls some targets
rxrpc: Fix oops when discarding a preallocated service call
irda: do not leak initialized list.dev to userspace
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
PCI: Allow PCI express root ports to find themselves
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
ipv6: reset fn->rr_ptr when replacing route
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
tun: handle register_netdevice() failures properly
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
bpf, doc: improve sysctl knob description
netxen: fix incorrect loop counter decrement
nfp: fix infinite loop on umapping cleanup
...
Linus Torvalds
commited |
e3181f2c0c | |
This was reported many times, and this was even mentioned in commit
Oleg Nesterov
authored and
Linus Torvalds
commited |
dd1c1f2f20 | |
Given the late stage of this series, some more involved fixes have been held back for the upcoming merge window. The hid-sensor issue has been causing problems for a long time so it is great to have that one finally fixed! No more bug reports for the userspace guys (well about that anyway). * documentation - some warning fixes due to missing colons in kernel-doc. * adis16480 - fix accel scale factor. * bmp280 - properly initialize the device for humidity readings - without this the humidity readings may be skipped and a magic value of 0x8000 returned. * hid-sensor-strigger - fix a race with user space when powering up the sensor. * ina291 - Avoid an underflow for the sleeping time as a result of supporting the fastest rates. * st-magnetometer - Fix the status register address for hte LSM303AGR, - Remove the ihl property for LSM303AGR as the sensor doesn't support active low for the dataready line. * stm32-adc - Fix use of a common clock rate. * stm32-timer - fix the quadrature mode get routine to account for the magic 0 value. set on boot. - fix the return value of write_raw, - fix the get/set down count direction as the enum value was not being converted to the relevant bit field, - add an enable attribute to actually turn it on when in encoder mode, - missing mask when reading the trigger mode. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlmZnXoRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Foj5nA/+J/CB6E6lOiWXplGVgDJWNOgTAE5zS27Z mwbUpI6kgGOS42+BJTtfQM9JvdZ8nLl4cR7oJ4v2LWXUV0p5WhKVx3EvKFcMazKj FZvEZLx0fBvCg7N7u5+v3dWEHuh3DkLBl36J13oxDM0v0oxHVbg+RFfous9t1kCK faV+nQeGBy51TBw7qasAaKV3FGqFmftRhYzNoG40yH0gzcu/YWRL47rotwwQryMj XLJg9AZ4w2XQmUgNXGjdTtphDT99sRWxi6zQCtlGQitm2E+4Oc2l7xg4tDpudqzY oPo64BVF2UcZO7KL0KBAhvhmxFOXtmayPDLknfqzScLEYGV7AZUkwMiNBY2x3H+d pkyLx1wKZd2HX2yNDM9K9We1vuAt/845Unx8iX2cUMzx89n99ODlGvE0R/7IpnJd YezXwoDqwUZYzysyZb6weFXdhNCSyYRFnGXw9axvA/3c2vgxVBZd4Q9BnAZ0J2xy gtbrosvMD6U713N+CA6V8ccz46UNHr4pZK65qiUfCMam+zs1JUkmrUJtnuPwPfJA A1SK55VzrWqq1LVA6qBvbRpx19Ylh1oFJtwsFCPIE85kZCpmop/LOPia4PXeXePr HOrNJNT+c6bv6aHyEL8CePqyWcoLL+TLoDET6XzEN0/eQI327jtW1EjTX/Utbw1J 8iyLXx7CgDo= =1ota -----END PGP SIGNATURE----- Merge tag 'fixes-for-4.13b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.13 cycle. Given the late stage of this series, some more involved fixes have been held back for the upcoming merge window. The hid-sensor issue has been causing problems for a long time so it is great to have that one finally fixed! No more bug reports for the userspace guys (well about that anyway). * documentation - some warning fixes due to missing colons in kernel-doc. * adis16480 - fix accel scale factor. * bmp280 - properly initialize the device for humidity readings - without this the humidity readings may be skipped and a magic value of 0x8000 returned. * hid-sensor-strigger - fix a race with user space when powering up the sensor. * ina291 - Avoid an underflow for the sleeping time as a result of supporting the fastest rates. * st-magnetometer - Fix the status register address for hte LSM303AGR, - Remove the ihl property for LSM303AGR as the sensor doesn't support active low for the dataready line. * stm32-adc - Fix use of a common clock rate. * stm32-timer - fix the quadrature mode get routine to account for the magic 0 value. set on boot. - fix the return value of write_raw, - fix the get/set down count direction as the enum value was not being converted to the relevant bit field, - add an enable attribute to actually turn it on when in encoder mode, - missing mask when reading the trigger mode.
Greg Kroah-Hartman
commited |
2c68888f1d | |
Pull perf fixes from Thomas Gleixner:
"Two fixes for the perf subsystem:
- Fix an inconsistency of RDPMC mm struct tagging across exec() which
causes RDPMC to fault.
- Correct the timestamp mechanics across IOC_DISABLE/ENABLE which
causes incorrect timestamps and total time calculations"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix time on IOC_ENABLE
perf/x86: Fix RDPMC vs. mm_struct tracking
Linus Torvalds
commited |
e46db8d2ef | |
Pull watchdog fix from Thomas Gleixner: "A fix for the hardlockup watchdog to prevent false positives with extreme Turbo-Modes which make the perf/NMI watchdog fire faster than the hrtimer which is used to verify. Slightly larger than the minimal fix, which just would increase the hrtimer frequency, but comes with extra overhead of more watchdog timer interrupts and thread wakeups for all users. With this change we restrict the overhead to the extreme Turbo-Mode systems" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/watchdog: Prevent false positives with turbo modes
Linus Torvalds
commited |
e18a5ebc2d | |
The kerneldoc description for the trig_readonly field of struct iio_dev lacked a colon, leading to this doc build warning: ./include/linux/iio/iio.h:603: warning: No description found for parameter 'trig_readonly' A similar issue for iio_trigger_set_immutable() in trigger.h yielded: ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'indio_dev' ./include/linux/iio/trigger.h:151: warning: No description found for parameter 'trig' Fix the formatting and silence the warnings. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> 
Jonathan Corbet
authored and
 Jonathan Cameron
commited |
f00fd7ae4f | |
Wenwei Tao has noticed that our current assumption that the oom victim
is dying and never doing any visible changes after it dies, and so the
oom_reaper can tear it down, is not entirely true.
__task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set
but do_group_exit sends SIGKILL to all threads _after_ the flag is set.
So there is a race window when some threads won't have
fatal_signal_pending while the oom_reaper could start unmapping the
address space. Moreover some paths might not check for fatal signals
before each PF/g-u-p/copy_from_user.
We already have a protection for oom_reaper vs. PF races by checking
MMF_UNSTABLE. This has been, however, checked only for kernel threads
(use_mm users) which can outlive the oom victim. A simple fix would be
to extend the current check in handle_mm_fault for all tasks but that
wouldn't be sufficient because the current check assumes that a kernel
thread would bail out after EFAULT from get_user*/copy_from_user and
never re-read the same address which would succeed because the PF path
has established page tables already. This seems to be the case for the
only existing use_mm user currently (virtio driver) but it is rather
fragile in general.
This is even more fragile in general for more complex paths such as
generic_perform_write which can re-read the same address more times
(e.g. iov_iter_copy_from_user_atomic to fail and then
iov_iter_fault_in_readable on retry).
Therefore we have to implement MMF_UNSTABLE protection in a robust way
and never make a potentially corrupted content visible. That requires
to hook deeper into the PF path and check for the flag _every time_
before a pte for anonymous memory is established (that means all
!VM_SHARED mappings).
The corruption can be triggered artificially
(http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp)
but there doesn't seem to be any real life bug report. The race window
should be quite tight to trigger most of the time.
Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org
Fixes:
Michal Hocko
authored and
Linus Torvalds
commited |
6b31d5955c | |
There is existing use after free bug when deferred struct pages are
enabled:
The memblock_add() allocates memory for the memory array if more than
128 entries are needed. See comment in e820__memblock_setup():
* The bootstrap memblock region count maximum is 128 entries
* (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries
* than that - so allow memblock resizing.
This memblock memory is freed here:
free_low_memory_core_early()
We access the freed memblock.memory later in boot when deferred pages
are initialized in this path:
deferred_init_memmap()
for_each_mem_pfn_range()
__next_mem_pfn_range()
type = &memblock.memory;
One possible explanation for why this use-after-free hasn't been hit
before is that the limit of INIT_MEMBLOCK_REGIONS has never been
exceeded at least on systems where deferred struct pages were enabled.
Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128,
and verifying in qemu that this code is getting excuted and that the
freed pages are sane.
Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com
Fixes:
Pavel Tatashin
authored and
Linus Torvalds
commited |
3010f87650 | |
These are the few pending fixes I have queued up for v4.13-final. One is a a generic regression fix for recursive loops on kmod and the other one is a trivial print out correction. During the v4.13 development we assumed that recursive kmod loops were no longer possible. Clearly that is not true. The regression fix makes use of a new killable wait. We use a killable wait to be paranoid in how signals might be sent to modprobe and only accept a proper SIGKILL. The signal will only be available to userspace to issue *iff* a thread has already entered a wait state, and that happens only if we've already throttled after 50 kmod threads have been hit. Note that although it may seem excessive to trigger a failure afer 5 seconds if all kmod thread remain busy, prior to the series of changes that went into v4.13 we would actually *always* fatally fail any request which came in if the limit was already reached. The new waiting implemented in v4.13 actually gives us *more* breathing room -- the wait for 5 seconds is a wait for *any* kmod thread to finish. We give up and fail *iff* no kmod thread has finished and they're *all* running straight for 5 consecutive seconds. If 50 kmod threads are running consecutively for 5 seconds something else must be really bad. Recursive loops with kmod are bad but they're also hard to implement properly as a selftest without currently fooling current userspace tools like kmod [1]. For instance kmod will complain when you run depmod if it finds a recursive loop with symbol dependency between modules as such this type of recursive loop cannot go upstream as the modules_install target will fail after running depmod. These tests already exist on userspace kmod upstream though (refer to the testsuite/module-playground/mod-loop-*.c files). The same is not true if request_module() is used though, or worst if aliases are used. Likewise the issue with 64-bit kernels booting 32-bit userspace without a binfmt handler built-in is also currently not detected and proactively avoided by userspace kmod tools, or kconfig for all architectures. Although we could complain in the kernel when some of these individual recursive issues creep up, proactively avoiding these situations in userspace at build time is what we should keep striving for. Lastly, since recursive loops could happen with kmod it may mean recursive loops may also be possible with other kernel usermode helpers, this should be investigated and long term if we can come up with a more sensible generic solution even better! [0] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git/log/?h=20170809-kmod-for-v4.13-final [1] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git This patch (of 3): This wait is similar to wait_event_interruptible_timeout() but only accepts SIGKILL interrupt signal. Other signals are ignored. Link: http://lkml.kernel.org/r/20170809234635.13443-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Matt Redfearn <matt.redfearn@imgetc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
Luis R. Rodriguez
authored and
Linus Torvalds
commited |
8ada92799e | |
Jaegeuk and Brad report a NULL pointer crash when writeback ending tries
to update the memcg stats:
BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0
IP: test_clear_page_writeback+0x12e/0x2c0
[...]
RIP: 0010:test_clear_page_writeback+0x12e/0x2c0
Call Trace:
<IRQ>
end_page_writeback+0x47/0x70
f2fs_write_end_io+0x76/0x180 [f2fs]
bio_endio+0x9f/0x120
blk_update_request+0xa8/0x2f0
scsi_end_request+0x39/0x1d0
scsi_io_completion+0x211/0x690
scsi_finish_command+0xd9/0x120
scsi_softirq_done+0x127/0x150
__blk_mq_complete_request_remote+0x13/0x20
flush_smp_call_function_queue+0x56/0x110
generic_smp_call_function_single_interrupt+0x13/0x30
smp_call_function_single_interrupt+0x27/0x40
call_function_single_interrupt+0x89/0x90
RIP: 0010:native_safe_halt+0x6/0x10
(gdb) l *(test_clear_page_writeback+0x12e)
0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619).
614 mod_node_page_state(page_pgdat(page), idx, val);
615 if (mem_cgroup_disabled() || !page->mem_cgroup)
616 return;
617 mod_memcg_state(page->mem_cgroup, idx, val);
618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)];
619 this_cpu_add(pn->lruvec_stat->count[idx], val);
620 }
621
622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order,
623 gfp_t gfp_mask,
The issue is that writeback doesn't hold a page reference and the page
might get freed after PG_writeback is cleared (and the mapping is
unlocked) in test_clear_page_writeback(). The stat functions looking up
the page's node or zone are safe, as those attributes are static across
allocation and free cycles. But page->mem_cgroup is not, and it will
get cleared if we race with truncation or migration.
It appears this race window has been around for a while, but less likely
to trigger when the memcg stats were updated first thing after
PG_writeback is cleared. Recent changes reshuffled this code to update
the global node stats before the memcg ones, though, stretching the race
window out to an extent where people can reproduce the problem.
Update test_clear_page_writeback() to look up and pin page->mem_cgroup
before clearing PG_writeback, then not use that pointer afterward. It
is a partial revert of
Johannes Weiner
authored and
Linus Torvalds
commited |
739f79fc9d | |
The hardlockup detector on x86 uses a performance counter based on unhalted
CPU cycles and a periodic hrtimer. The hrtimer period is about 2/5 of the
performance counter period, so the hrtimer should fire 2-3 times before the
performance counter NMI fires. The NMI code checks whether the hrtimer
fired since the last invocation. If not, it assumess a hard lockup.
The calculation of those periods is based on the nominal CPU
frequency. Turbo modes increase the CPU clock frequency and therefore
shorten the period of the perf/NMI watchdog. With extreme Turbo-modes (3x
nominal frequency) the perf/NMI period is shorter than the hrtimer period
which leads to false positives.
A simple fix would be to shorten the hrtimer period, but that comes with
the side effect of more frequent hrtimer and softlockup thread wakeups,
which is not desired.
Implement a low pass filter, which checks the perf/NMI period against
kernel time. If the perf/NMI fires before 4/5 of the watchdog period has
elapsed then the event is ignored and postponed to the next perf/NMI.
That solves the problem and avoids the overhead of shorter hrtimer periods
and more frequent softlockup thread wakeups.
Fixes:
Thomas Gleixner
commited |
7edaeb6841 | |
Christian Brauner reported that if you use the TIOCGPTPEER ioctl() to
get a slave pty file descriptor, the resulting file descriptor doesn't
look right in /proc/<pid>/fd/<fd>. In particular, he wanted to use
readlink() on /proc/self/fd/<fd> to get the pathname of the slave pty
(basically implementing "ptsname{_r}()").
The reason for that was that we had generated the wrong 'struct path'
when we create the pty in ptmx_open().
In particular, the dentry was correct, but the vfsmount pointed to the
mount of the ptmx node. That _can_ be correct - in case you use
"/dev/pts/ptmx" to open the master - but usually is not. The normal
case is to use /dev/ptmx, which then looks up the pts/ directory, and
then the vfsmount of the ptmx node is obviously the /dev directory, not
the /dev/pts/ directory.
We actually did have the right vfsmount available, but in the wrong
place (it gets looked up in 'devpts_acquire()' when we get a reference
to the pts filesystem), and so ptmx_open() used the wrong mnt pointer.
The end result of this confusion was that the pty worked fine, but when
if you did TIOCGPTPEER to get the slave side of the pty, end end result
would also work, but have that dodgy 'struct path'.
And then when doing "d_path()" on to get the pathname, the vfsmount
would not match the root of the pts directory, and d_path() would return
an empty pathname thinking that the entry had escaped a bind mount into
another mount.
This fixes the problem by making devpts_acquire() return the vfsmount
for the pts filesystem, allowing ptmx_open() to trivially just use the
right mount for the pts dentry, and create the proper 'struct path'.
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Eric Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds
commited |
c8c03f1858 | |
As found by syzkaller, malicious users can set whatever tx_queue_len
on a tun device and eventually crash the kernel.
Lets remove the ALIGN(XXX, SMP_CACHE_BYTES) thing since a small
ring buffer is not fast anyway.
Fixes:
Eric Dumazet
authored and
 David S. Miller
commited |
81fbfe8ada | |
This patch handles the following issues that were observed when we are handling racing channel offer message and rescind message for the same offer: 1. Since the host does not respond to messages on a rescinded channel, in the current code, we could be indefinitely blocked on the vmbus_open() call. 2. When a rescinded channel is being closed, if there is a pending interrupt on the channel, we could end up freeing the channel that the interrupt handler would run on. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
K. Y. Srinivasan
authored and
Greg Kroah-Hartman
commited |
6f3d791f30 | |
Pull networking fixes from David Miller:
1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel
Grumbach.
2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From
Vivien Didelot.
3) Fix two regressions with bonding on wireless, from Andreas Born.
4) Fix build when busypoll is disabled, from Daniel Borkmann.
5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet.
6) Set SKB cached route properly in inet_rtm_getroute(), from Florian
Westphal.
7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding
Tianhong.
8) Fix module refcnt leak in ULP code, from Sabrina Dubroca.
9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric
Dumazet.
10) Need to purge socket write queue in dccp_destroy_sock(), also from
Eric Dumazet.
11) Make bpf_trace_printk() work properly on 32-bit architectures, from
Daniel Borkmann.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
bpf: fix bpf_trace_printk on 32 bit archs
PCI: fix oops when try to find Root Port for a PCI device
sfc: don't try and read ef10 data on non-ef10 NIC
net_sched: remove warning from qdisc_hash_add
net_sched/sfq: update hierarchical backlog when drop packet
net_sched: reset pointers to tcf blocks in classful qdiscs' destructors
ipv4: fix NULL dereference in free_fib_info_rcu()
net: Fix a typo in comment about sock flags.
ipv6: fix NULL dereference in ip6_route_dev_notify()
tcp: fix possible deadlock in TCP stack vs BPF filter
dccp: purge write queue in dccp_destroy_sock()
udp: fix linear skb reception with PEEK_OFF
ipv6: release rt6->rt6i_idev properly during ifdown
af_key: do not use GFP_KERNEL in atomic contexts
tcp: ulp: avoid module refcnt leak in tcp_set_ulp
net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag
PCI: Disable Relaxed Ordering Attributes for AMD A1100
PCI: Disable Relaxed Ordering for some Intel processors
PCI: Disable PCIe Relaxed Ordering if unsupported
...
Linus Torvalds
commited |
510c8a899c | |
The extcon header file defines the functions which used the mismatched indentation and used the space on some case. So, this patch clean-up the indentation in order to improve the readbility. And this patch changes the return value of extcon_get_extcon_dev() because of maintaing the same value with extcon_get_edev_by_phandle(). Signed-off-by: Chanwoo Choi <cwchoi00@gmail.com> 
Chanwoo Choi
commited |
ab8a8fbe93 | |
The extcon files explains the detailed operation for functions and what is meaning of extcon structure. There are different explanation even if the same argument. So, it modifies the description for both functions and structures in order to improve the readability and guide the role of functions more well. Also, this patch fixes the mismatching license info as a GPL v2 and removes the inactive author information. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> 
Chanwoo Choi
commited |
6ab6094f37 | |
|
Chanwoo Choi
commited |
ae3614fda9 | |
The commit
Chanwoo Choi
commited |
808ae8f3c7 | |
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Tonghao Zhang
authored and
David S. Miller
commited |
b3dc8f772f | |
The struct iommu_device has a 'struct device' embedded into
it, not as a pointer, but the whole struct. In the
conversion of the iommu drivers to use struct iommu_device
it was forgotten that the relase function for that struct
device simply calls kfree() on the pointer.
This frees memory that was never allocated and causes memory
corruption.
To fix this issue, use a pointer to struct device instead of
embedding the whole struct. This needs some updates in the
iommu sysfs code as well as the Intel VT-d and AMD IOMMU
driver.
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Fixes:
Joerg Roedel
commited |
2926a2aa5c | |
When bit4 is set in the PCIe Device Control register, it indicates whether the device is permitted to use relaxed ordering. On some platforms using relaxed ordering can have performance issues or due to erratum can cause data-corruption. In such cases devices must avoid using relaxed ordering. The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that Relaxed Ordering (RO) attribute should not be used for Transaction Layer Packets (TLP) targeted towards these affected root complexes. This patch checks if there is any node in the hierarchy that indicates that using relaxed ordering is not safe. In such cases the patch turns off the relaxed ordering by clearing the capability for this device. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
dingtianhong
authored and
David S. Miller
commited |
a99b646afa | |
We want the firmware, and other changes, in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman
commited |
d985524680 | |
Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a -rc1 patch that turned out to not be a good idea, and the other is a fix for the pl011 serial driver. Both have been in linux-next with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+1vw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykreACeLI2spfagnOcnW264PGHxLMgj47EAn0JPSNIg 5FLEtVsgxMuc8kc4LkDb =58g+ -----END PGP SIGNATURE----- Merge tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a -rc1 patch that turned out to not be a good idea, and the other is a fix for the pl011 serial driver. Both have been in linux-next with no reported issues" * tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: Delete dead code for CIR serial ports" tty: pl011: fix initialization order of QDF2400 E44
Linus Torvalds
commited |
438630ef5b | |
Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+0+A8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ykwSgCgzvxKfEcAHXOxB90/bHl3yWh+Xe0AoNRX5xEX gavfFbhZlrPqtlZGX1ZI =NmcC -----END PGP SIGNATURE----- Merge tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio fixes from Greg KH: "Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog" * tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING iio: aspeed-adc: wait for initial sequence. iio: accel: bmc150: Always restore device to normal mode after suspend-resume staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits iio: accel: st_accel: add SPI-3wire support iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable iio: pressure: st_pressure_core: disable multiread by default for LPS22HB iio: light: tsl2563: use correct event code
Linus Torvalds
commited |
dd95f18607 | |
Pull block fixes from Jens Axboe:
"A set of fixes that should go into this series. This contains:
- Fix from Bart for blk-mq requeue queue running, preventing a
continued loop of run/restart.
- Fix for a bio/blk-integrity issue, in two parts. One from
Christoph, fixing where verification happens, and one from Milan,
for a NULL profile.
- NVMe pull request, most of the changes being for nvme-fc, but also
a few trivial core/pci fixes"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: fix directive command numd calculation
nvme: fix nvme reset command timeout handling
nvme-pci: fix CMB sysfs file removal in reset path
lpfc: support nvmet_fc defer_rcv callback
nvmet_fc: add defer_req callback for deferment of cmd buffer return
nvme: strip trailing 0-bytes in wwid_show
block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time
bio-integrity: only verify integrity on the lowest stacked driver
bio-integrity: Fix regression if profile verify_fn is NULL
Linus Torvalds
commited |
e0d0e045b8 | |
Pull NVMe fixes from Christoph: "A few more small fixes - the fc/lpfc update is the biggest by far."
Jens Axboe
commited |
4a8b53be64 | |
-----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJZjSXnAAoJEAx081l5xIa+G70QAKF+APi228YgYrLBEZ5Y/lh5 KaMT/vfKXcB1tEP7wVFGdeihDCICQTqtOtpd5Q+XwJbLlfP8kxGRntdotzsJwb9I m2okKW6umOhvC3jWUIgDzpitqOrWOPoQFPmiLf2er9RLfQDE7gmhB53obHcQahBt cplFwVN/k3oywGd0iJ6evRqD/ShSgy/m2tz2w7Pd8mGSJwEGZvvbYTMm3/s7Dbxh KNIfi7tHfQ9LULayjD2FJQ8o5/PN9A5bAVLraXj0XtOehSzwt+d7trvKPc1aZl9A Y6O7SUjaoqV5fkwqsosCZpyR+KVBwmXe8k4yA4hm2pHqpvzbfCiSzJhJg7h/klwI uZowRhNxxvBwt01CZ0rd8zFkZ8HJ28LsKfyF0BG2haJn7g7gZutQzLKRrFnnND1J jGGqVkH+US2Uqewmpr0h5lR7pglxBRXCnpI7ZTH9wNtiyf7z9wHhLrkYEveXcVf6 DIEEf103C7lro+cE+iJU0OZPgLRWePqIrAmZtLD1VQr9jbXhkJphFpTb+0OJhpeb KscH4m8Q+T0JlqcyIBk+K2ZCT+zxM0LMohXrlwfd+QU38nIbgWXJY01lGyhXLhMS aSImarAGAb1xNru24ylsUgbALRXQfJNTxeNNUu55/MVLi2rSFvm0tb/yy1oU5Bpr J+guLSplCdrRQ81RTvR2 =rjAR -----END PGP SIGNATURE----- Merge tag 'drm-fixes-for-v4.13-rc5' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Nothing too earth shattering here, it just seems like lots of little things all over the place. msm has probably the larger amount of changes, but they all seem fine, otherwise, some rockchip, i915, etnaviv and exynos fixes, along with one nouveau regression fix for some older GPUs" * tag 'drm-fixes-for-v4.13-rc5' of git://people.freedesktop.org/~airlied/linux: (35 commits) drm/nouveau/disp/nv04: avoid creation of output paths drm: make DRM_STM default n drm/exynos: forbid creating framebuffers from too small GEM buffers drm/etnaviv: Fix off-by-one error in reloc checking drm/i915: fix backlight invert for non-zero minimum brightness drm/i915/shrinker: Wrap need_resched() inside preempt-disable drm/i915/perf: fix flex eu registers programming drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut drm/i915/gvt: Change the max length of mmio_reg_rw from 4 to 8 drm/i915/gvt: Initialize MMIO Block with HW state drm/rockchip: vop: report error when check resource error drm/rockchip: vop: round_up pitches to word align drm/rockchip: vop: fix NV12 video display error drm/rockchip: vop: fix iommu page fault when resume drm/i915/gvt: clean workload queue if error happened drm/i915/gvt: change resetting to resetting_eng drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM drm/msm/adreno: Prevent unclocked access when retrieving timestamps drm/msm: Remove __user from __u64 data types ...
Linus Torvalds
commited |
b2dbdf2ca1 |