mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-22 10:18:10 +07:00
| SHA1 | ||
|---|---|---|
This has been a quiet cycle for RDMA, the big bulk is the usual smallish
driver updates and bug fixes. About four new uAPI related things. Not as much
Szykaller patches this time, the bugs it finds are getting harder to fix.
- More work cleaning up the RDMA CM code
- Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns, i40iw, iw_cxgb4, mlx5, rxe
- Driver specific resource tracking and reporting via netlink
- Continued work for name space support from Parav
- MPLS support for the verbs flow steering uAPI
- A few tricky IPoIB fixes improving robustness
- HFI1 driver support for the '16B' management packet format
- Some auditing to not print kernel pointers via %llx or similar
- Mark the entire 'UCM' user-space interface as BROKEN with the intent to remove it
entirely. The user space side of this was long ago replaced with RDMA-CM and
syzkaller is finding bugs in the residual UCM interface nobody wishes to fix because
nobody uses it.
- Purge more bogus BUG_ON's from Leon
- 'flow counters' verbs uAPI
- T10 fixups for iser/isert, these are Acked by Martin but going through the RDMA
tree due to dependencies
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Mb8m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has been a quiet cycle for RDMA, the big bulk is the usual
smallish driver updates and bug fixes. About four new uAPI related
things. Not as much Szykaller patches this time, the bugs it finds are
getting harder to fix.
Summary:
- More work cleaning up the RDMA CM code
- Usual driver bug fixes and cleanups for qedr, qib, hfi1, hns,
i40iw, iw_cxgb4, mlx5, rxe
- Driver specific resource tracking and reporting via netlink
- Continued work for name space support from Parav
- MPLS support for the verbs flow steering uAPI
- A few tricky IPoIB fixes improving robustness
- HFI1 driver support for the '16B' management packet format
- Some auditing to not print kernel pointers via %llx or similar
- Mark the entire 'UCM' user-space interface as BROKEN with the
intent to remove it entirely. The user space side of this was long
ago replaced with RDMA-CM and syzkaller is finding bugs in the
residual UCM interface nobody wishes to fix because nobody uses it.
- Purge more bogus BUG_ON's from Leon
- 'flow counters' verbs uAPI
- T10 fixups for iser/isert, these are Acked by Martin but going
through the RDMA tree due to dependencies"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (138 commits)
RDMA/mlx5: Update SPDX tags to show proper license
RDMA/restrack: Change SPDX tag to properly reflect license
IB/hfi1: Fix comment on default hdr entry size
IB/hfi1: Rename exp_lock to exp_mutex
IB/hfi1: Add bypass register defines and replace blind constants
IB/hfi1: Remove unused variable
IB/hfi1: Ensure VL index is within bounds
IB/hfi1: Fix user context tail allocation for DMA_RTAIL
IB/hns: Use zeroing memory allocator instead of allocator/memset
infiniband: fix a possible use-after-free bug
iw_cxgb4: add INFINIBAND_ADDR_TRANS dependency
IB/isert: use T10-PI check mask definitions from core layer
IB/iser: use T10-PI check mask definitions from core layer
RDMA/core: introduce check masks for T10-PI offload
IB/isert: fix T10-pi check mask setting
IB/mlx5: Add counters read support
IB/mlx5: Add flow counters read support
IB/mlx5: Add flow counters binding support
IB/mlx5: Add counters create and destroy support
IB/uverbs: Add support for flow counters
...
Linus Torvalds
commited |
a1cdde8c41 | |
The FPGA queue pair (QP) event fires whenever a QP on the FPGA transitions to the error state. At this stage, this event is unrecoverable, it may become recoverable in the future. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Ilan Tayari
authored and
 David S. Miller
commited |
1f0cf89b09 | |
Temperature warning event is sent by FW to indicate high temperature as detected by one of the sensors on the board. Add handling of this event by writing the numbers of the alert sensors to the kernel log. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ilan Tayari
authored and
David S. Miller
commited |
1865ea9adb | |
Add pbmc and pptb in the port_access_reg_cap_mask. These two bits determine if device supports receive buffer configuration. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Huy Nguyen
authored and
 Saeed Mahameed
commited |
df5f1361cc | |
This patch reports the device's capbilities to offload encapsulated MPLS tunnel protocols to user-space: - Capability to offload MPLS over GRE. - Capability to offload MPLS over UDP. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 
Ariel Levkovich
authored and
 Jason Gunthorpe
commited |
e818e255a5 | |
This patch introduces support for the MPLS flow spec and allows the creation of rules that are matching on the MPLS label. Applying the rule matching depends on the flow specs order and the location of the MPLS in the spec list as there are different configurations to be made in the device in the cases of MPLSoGRE and MPLSoUDP vs. non-encapsulated MPLS. Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich
authored and
Jason Gunthorpe
commited |
71c6e8638c | |
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back). This
series addresses an IRQ performance issue (patch 1), cleanups related to
the fix for the IRQ performance problem (patches 2-6), and then extends
the fragmented completion queue support that already exists in the net
side of the driver to the ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the remaining
10 patches to the IB subsystem. This series extends the current
'representor' framework when the mlx5 driver is in switchdev mode from
being a netdev only construct to being a netdev/IB dev construct. The IB
dev is limited to raw Eth queue pairs only, but by having an IB dev of
this type attached to the representor for a switchdev port, it enables
DPDK to work on the switchdev device.
* All net related, but needed as infrastructure for the rdma driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to
set the port for ib_srpt to listen on in configfs in order for it to be
enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while working on new
code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory'
user API features
- Infrastructure updates for the new IOCTL interface, based on increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit
kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ku8g
-----END PGP SIGNATURE-----
Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Doug and I are at a conference next week so if another PR is sent I
expect it to only be bug fixes. Parav noted yesterday that there are
some fringe case behavior changes in his work that he would like to
fix, and I see that Intel has a number of rc looking patches for HFI1
they posted yesterday.
Parav is again the biggest contributor by patch count with his ongoing
work to enable container support in the RDMA stack, followed by Leon
doing syzkaller inspired cleanups, though most of the actual fixing
went to RC.
There is one uncomfortable series here fixing the user ABI to actually
work as intended in 32 bit mode. There are lots of notes in the commit
messages, but the basic summary is we don't think there is an actual
32 bit kernel user of drivers/infiniband for several good reasons.
However we are seeing people want to use a 32 bit user space with 64
bit kernel, which didn't completely work today. So in fixing it we
required a 32 bit rxe user to upgrade their userspace. rxe users are
still already quite rare and we think a 32 bit one is non-existing.
- Fix RDMA uapi headers to actually compile in userspace and be more
complete
- Three shared with netdev pull requests from Mellanox:
* 7 patches, mostly to net with 1 IB related one at the back).
This series addresses an IRQ performance issue (patch 1),
cleanups related to the fix for the IRQ performance problem
(patches 2-6), and then extends the fragmented completion queue
support that already exists in the net side of the driver to the
ib side of the driver (patch 7).
* Mostly IB, with 5 patches to net that are needed to support the
remaining 10 patches to the IB subsystem. This series extends
the current 'representor' framework when the mlx5 driver is in
switchdev mode from being a netdev only construct to being a
netdev/IB dev construct. The IB dev is limited to raw Eth queue
pairs only, but by having an IB dev of this type attached to the
representor for a switchdev port, it enables DPDK to work on the
switchdev device.
* All net related, but needed as infrastructure for the rdma
driver
- Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers
- SRP performance updates
- IB uverbs write path cleanup patch series from Leon
- Add RDMA_CM support to ib_srpt. This is disabled by default. Users
need to set the port for ib_srpt to listen on in configfs in order
for it to be enabled
(/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)
- TSO and Scatter FCS support in mlx4
- Refactor of modify_qp routine to resolve problems seen while
working on new code that is forthcoming
- More refactoring and updates of RDMA CM for containers support from
Parav
- mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
memory' user API features
- Infrastructure updates for the new IOCTL interface, based on
increased usage
- ABI compatibility bug fixes to fully support 32 bit userspace on 64
bit kernel as was originally intended. See the commit messages for
extensive details
- Syzkaller bugs and code cleanups motivated by them"
* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
IB/mlx5: Device memory mr registration support
net/mlx5: Mkey creation command adjustments
IB/mlx5: Device memory support in mlx5_ib
net/mlx5: Query device memory capabilities
IB/uverbs: Add device memory registration ioctl support
IB/uverbs: Add alloc/free dm uverbs ioctl support
IB/uverbs: Add device memory capabilities reporting
IB/uverbs: Expose device memory capabilities to user
RDMA/qedr: Fix wmb usage in qedr
IB/rxe: Removed GID add/del dummy routines
RDMA/qedr: Zero stack memory before copying to user space
IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
IB/mlx5: Add information for querying IPsec capabilities
IB/mlx5: Add IPsec support for egress and ingress
{net,IB}/mlx5: Add ipsec helper
IB/mlx5: Add modify_flow_action_esp verb
IB/mlx5: Add implementation for create and destroy action_xfrm
IB/uverbs: Introduce ESP steering match filter
IB/uverbs: Add modify ESP flow_action
...
Linus Torvalds
commited |
19fd08b85b | |
This patch adds querying of device memory capabilities by the mlx5_core driver during initialization. Device memory capabilities is a new capability type and structure which contains the necessary data that is needed for future device memory allocation. The presence of this new capabilities struct is indicated in the general capabilities struct which is queried first by the driver. If the presence bit is set, the driver will also query the new capabilities struct and save it in the device context. Signed-off-by: Ariel Levkovich <lariel@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Ariel Levkovich
authored and
Jason Gunthorpe
commited |
e72bd817ae | |
Current Striding RQ HW feature utilizes the RX buffers so that there is no wasted room between the strides. This maximises the memory utilization. This prevents the use of build_skb() (which requires headroom and tailroom), and demands to memcpy the packets headers into the skb linear part. In this patch, whenever a set of conditions holds, we apply an RQ configuration that allows combining the use of linear SKB on top of a Striding RQ. To use build_skb() with Striding RQ, the following must hold: 1. packet does not cross a page boundary. 2. there is enough headroom and tailroom surrounding the packet. We can satisfy 1 and 2 by configuring: stride size = MTU + headroom + tailoom. This is possible only when: a. (MTU - headroom - tailoom) does not exceed PAGE_SIZE. b. HW LRO is turned off. Using linear SKB has many advantages: - Saves a memcpy of the headers. - No page-boundary checks in datapath. - No filler CQEs. - Significantly smaller CQ. - SKB data continuously resides in linear part, and not split to small amount (linear part) and large amount (fragment). This saves datapath cycles in driver and improves utilization of SKB fragments in GRO. - The fragments of a resulting GRO SKB follow the IP forwarding assumption of equal-size fragments. Some implementation details: HW writes the packets to the beginning of a stride, i.e. does not keep headroom. To overcome this we make sure we can extend backwards and use the last bytes of stride i-1. Extra care is needed for stride 0 as it has no preceding stride. We make sure headroom bytes are available by shifting the buffer pointer passed to HW by headroom bytes. This configuration now becomes default, whenever capable. Of course, this implies turning LRO off. Performance testing: ConnectX-5, single core, single RX ring, default MTU. UDP packet rate, early drop in TC layer: -------------------------------------------- | pkt size | before | after | ratio | -------------------------------------------- | 1500byte | 4.65 Mpps | 5.96 Mpps | 1.28x | | 500byte | 5.23 Mpps | 5.97 Mpps | 1.14x | | 64byte | 5.94 Mpps | 5.96 Mpps | 1.00x | -------------------------------------------- TCP streams: ~20% gain Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Tariq Toukan
authored and
Saeed Mahameed
commited |
619a8f2a42 | |
Add the needed capability bit and counters to device spec description. Expose the following two counters in ethtool: tx_pause_storm_warning_events: when the device is stalled for a period longer than a pre-configured watermark, the counter increase, allowing the debug utility an insight into current device status. tx_pause_storm_error_events: when the device is stalled for a period longer than a pre-configured timeout, the pause transmission is disabled, and the counter increase. Signed-off-by: Inbar Karmy <inbark@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Inbar Karmy
authored and
Saeed Mahameed
commited |
2fcb12df7d | |
BYPASS namespace is used by the RDMA side to insert flow rules into the vport RX flow tables. Currently only 8 priorities are exposed, increase this to 16 to allow more flexibility. This change will also cause the BYPASS namespace to use 32 levels (as apposed to 16 today) of flow tables, 16 levels for regular rules and 16 for don't trap rules. Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> 
Mark Bloch
authored and
 Doug Ledford
commited |
72f7cc09b1 | |
Generate a unique 128bit identifier for each host and pass that value to firmware in the INIT_HCA command if it reports the sw_owner_id capability. Each device bound to the mlx5_core driver will have the same software owner ID. In subsequent patches mlx5_core devices will be bound via a new VPort command so that they can operate together under a single InfiniBand device. Only devices that have the same software owner ID can be bound, to prevent traffic intended for one host arriving at another. The INIT_HCA command length was expanded by 128 bits. The command length is provided as an input FW commands. Older FW does not have a problem receiving this command in the new longer form. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 
Daniel Jurgens
authored and
Jason Gunthorpe
commited |
8737f818ca | |
Add a missing command interface to work with a DCT. It includes: creating, destroying and get events for. Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 
Moni Shoua
authored and
Jason Gunthorpe
commited |
57cda166bb | |
This patch extends the alloc context flow to be prepared for working with dynamic UAR allocations. Currently upon alloc context there is some fix size of UARs that are allocated (named 'static allocation') and there is no option to user application to ask for more or control which UAR will be used by which QP. In this patch the driver prepares its data structures to manage both the static and the dynamic allocations and let the user driver knows about the max value of dynamic blue-flame registers that are allowed. Downstream patches from this series will enable the dynamic allocation and the association as part of QP creation. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> 
Yishai Hadas
authored and
Jason Gunthorpe
commited |
31a78a5a79 | |
Add MLX5_SET16 and MLX5_GET16 for 16bit structure field in firmware command. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen
authored and
Saeed Mahameed
commited |
71c70eb21c | |
The QCAM register provides capability bit for all the QoS registers using ACCESS_REG command. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen
authored and
Saeed Mahameed
commited |
c02762eb20 | |
Currently, FPGA capability is located in (mdev)->caps.hca_cur,
change the location to be (mdev)->caps.fpga,
since hca_cur is reserved for HCA device capabilities.
Fixes:
Inbar Karmy
authored and
Saeed Mahameed
commited |
99d3cd27f7 | |
Pull networking updates from David Miller:
1) Support ipv6 checksum offload in sunvnet driver, from Shannon
Nelson.
2) Move to RB-tree instead of custom AVL code in inetpeer, from Eric
Dumazet.
3) Allow generic XDP to work on virtual devices, from John Fastabend.
4) Add bpf device maps and XDP_REDIRECT, which can be used to build
arbitrary switching frameworks using XDP. From John Fastabend.
5) Remove UFO offloads from the tree, gave us little other than bugs.
6) Remove the IPSEC flow cache, from Florian Westphal.
7) Support ipv6 route offload in mlxsw driver.
8) Support VF representors in bnxt_en, from Sathya Perla.
9) Add support for forward error correction modes to ethtool, from
Vidya Sagar Ravipati.
10) Add time filter for packet scheduler action dumping, from Jamal Hadi
Salim.
11) Extend the zerocopy sendmsg() used by virtio and tap to regular
sockets via MSG_ZEROCOPY. From Willem de Bruijn.
12) Significantly rework value tracking in the BPF verifier, from Edward
Cree.
13) Add new jump instructions to eBPF, from Daniel Borkmann.
14) Rework rtnetlink plumbing so that operations can be run without
taking the RTNL semaphore. From Florian Westphal.
15) Support XDP in tap driver, from Jason Wang.
16) Add 32-bit eBPF JIT for ARM, from Shubham Bansal.
17) Add Huawei hinic ethernet driver.
18) Allow to report MD5 keys in TCP inet_diag dumps, from Ivan
Delalande.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1780 commits)
i40e: point wb_desc at the nvm_wb_desc during i40e_read_nvm_aq
i40e: avoid NVM acquire deadlock during NVM update
drivers: net: xgene: Remove return statement from void function
drivers: net: xgene: Configure tx/rx delay for ACPI
drivers: net: xgene: Read tx/rx delay for ACPI
rocker: fix kcalloc parameter order
rds: Fix non-atomic operation on shared flag variable
net: sched: don't use GFP_KERNEL under spin lock
vhost_net: correctly check tx avail during rx busy polling
net: mdio-mux: add mdio_mux parameter to mdio_mux_init()
rxrpc: Make service connection lookup always check for retry
net: stmmac: Delete dead code for MDIO registration
gianfar: Fix Tx flow control deactivation
cxgb4: Ignore MPS_TX_INT_CAUSE[Bubble] for T6
cxgb4: Fix pause frame count in t4_get_port_stats
cxgb4: fix memory leak
tun: rename generic_xdp to skb_xdp
tun: reserve extra headroom only when XDP is set
net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
net: dsa: bcm_sf2: Advertise number of egress queues
...
Linus Torvalds
commited |
aae3dbb477 | |
Refactor function mlx5e_lro_update_hdr() to reduce number of branches. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tariq Toukan
authored and
Saeed Mahameed
commited |
604acb193b | |
The current code stores fte_match_param in the software representation of FTEs and FGs. fte_match_param contains a large reserved area at the bottom of the struct. Since downstream patches are going to hash this part, we would like to avoid doing so on a reserved part. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Matan Barak
authored and
Saeed Mahameed
commited |
667cb65ae5 | |
Report 'ipoib_enhanced_offloads' capabilities from the core layer, it will be used in the next patch from this series. Signed-off-by: Yishai Hadas <yishaih@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Yishai Hadas
authored and
Doug Ledford
commited |
4ce749bd94 | |
When delay drop timeout is expired, the firmware raises general notification event of DELAY_DROP_TIMEOUT subtype. In addition the feature is disable so the driver have to reactivate the timeout. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> 
Maor Gottlieb
authored and
Doug Ledford
commited |
246ac9814c | |
Add interface to initialize and interact with Innova FPGA SBU connections. A client driver may use these functions to set up a high-speed DMA connection with its SBU hardware logic, and send/receive messages over this connection. A later patch in this patchset will make use of these functions for Innova IPSec offload in mlx5 Ethernet driver. Add commands to retrieve Innova FPGA SBU capabilities, and to read/write Innova FPGA configuration space registers and memory, over internal I2C. At high level, the FPGA configuration space is divided such: 0x00000000 - 0x007fffff is reserved for the SBU 0x00800000 - 0xffffffff is reserved for the Shell 0x400000000 - ... is DDR memory A later patchset will add support for accessing FPGA CrSpace and memory over a high-speed connection. This is the reason for the ACCESS_TYPE enumeration, which currently only supports I2C. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Ilan Tayari
authored and
Saeed Mahameed
commited |
a9956d35d1 | |
Enhance MCAM to allow the driver to query which access regs are supported. For now, expose the regs needed for FW flashing. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Or Gerlitz
authored and
Saeed Mahameed
commited |
0ab87743cc | |
Overlapping changes in drivers/net/phy/marvell.c, bug fix in 'net' restricting a HW workaround alongside cleanups in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
commited |
34aa83c2fc | |
Masks for extracting part of the Completion Queue Entry (CQE) field rss_hash_type was swapped, namely CQE_RSS_HTYPE_IP and CQE_RSS_HTYPE_L4. The bug resulted in setting skb->l4_hash, even-though the rss_hash_type indicated that hash was NOT computed over the L4 (UDP or TCP) part of the packet. Added comments from the datasheet, to make it more clear what these masks are selecting. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Jesper Dangaard Brouer
authored and
David S. Miller
commited |
12e8b570e7 | |
Mellanox Innova is a NIC with ConnectX and an FPGA on the same board. The FPGA is a bump-on-the-wire and thus affects operation of the mlx5_core driver on the ConnectX ASIC. Add basic support for Innova in mlx5_core. This allows using the Innova card as a regular NIC, by detecting the FPGA capability bit, and verifying its load state before initializing ConnectX interfaces. Also detect FPGA fatal runtime failures and enter error state if they ever happen. All new FPGA-related logic is placed in its own subdirectory 'fpga', which may be built by selecting CONFIG_MLX5_FPGA. This prepares for further support of various Innova features in later patchsets. Additional details about hardware architecture will be provided as more features get submitted. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Ilan Tayari
authored and
Saeed Mahameed
commited |
e29341fb3a | |
For some reason, sparse doesn't like using an expression of type (!x) with a bitwise | and &. In order to mitigate that, we use a local variable. This removes the following sparse complaints on the core driver (and similar ones on the IB driver too): drivers/net/ethernet/mellanox/mlx5/core/srq.c:83:9: warning: dubious: !x & y drivers/net/ethernet/mellanox/mlx5/core/srq.c:96:9: warning: dubious: !x & y drivers/net/ethernet/mellanox/mlx5/core/port.c:59:9: warning: dubious: !x & y drivers/net/ethernet/mellanox/mlx5/core/vport.c:561:9: warning: dubious: !x & y Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Or Gerlitz
authored and
Saeed Mahameed
commited |
a61d5ce9cc | |
The caps structure consists of hca caps and port/management caps, all under one roof. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Gal Pressman
authored and
Saeed Mahameed
commited |
701052c578 | |
Add the needed infrastructure for future use of MPCNT register. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Gal Pressman
authored and
Saeed Mahameed
commited |
8ed1a6306d | |
Add the needed infrastructure for future use of PPCNT physical layer statistical group. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Gal Pressman
authored and
Saeed Mahameed
commited |
d8dc0508c5 | |
On load_one, we now cache our capabilities registers internally, similar to QUERY_HCA_CAP. Capabilities can later be queried using macros introduced in this patch. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Gal Pressman
authored and
Saeed Mahameed
commited |
71862561f3 | |
PCAM: Ports capabilities mask register. MCAM: Management capabilities mask register. PCAM and MCAM registers will provide information regarding firmware support for different features, in order to avoid cases where new driver combined with old firmware results in syndromes (for ex. PCIe counters before this patchset). Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Gal Pressman
authored and
Saeed Mahameed
commited |
cfdcbceaef | |
Implement query and set functionality for MTPPS and MTPPSE registers. MTPPS (Management Pulse Per Second) provides the device PPS capabilities, configures the PPS in and out modules and holds the PPS in time stamp. Query MTPPS is supported only when HCA_CAP.pps is set and modify is supported when HCA_CAP.pps_modify is set. MTPPSE (Management Pulse Per Second Event) configures the different event generation modes for PPS. Supported when HCA_CAP.pps is set. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> 
Eugenia Emantayev
authored and
Saeed Mahameed
commited |
f9a1ef720e | |
The following series of patches optimizes the usage of the UAR area which is
contained within the BAR 0-1. Previous versions of the firmware and the driver
assumed each system page contains a single UAR. This patch set will query the
firmware for a new capability that if published, means that the firmware can
support UARs of fixed 4K regardless of system page size. In the case of
powerpc, where page size equals 64KB, this means we can utilize 16 UARs per
system page. Since user space processes by default consume eight UARs per
context this means that with this change a process will need a single system
page to fulfill that requirement and in fact make use of more UARs which is
better in terms of performance.
In addition to optimizing user-space processes, we introduce an allocator
that can be used by kernel consumers to allocate blue flame registers
(which are areas within a UAR that are used to write doorbells). This provides
further optimization on using the UAR area since the Ethernet driver makes
use of a single blue flame register per system page and now it will use two
blue flame registers per 4K.
The series also makes changes to naming conventions and now the terms used in
the driver code match the terms used in the PRM (programmers reference manual).
Thus, what used to be called UUAR (micro UAR) is now called BFREG (blue flame
register).
In order to support compatibility between different versions of
library/driver/firmware, the library has now means to notify the kernel driver
that it supports the new scheme and the kernel can notify the library if it
supports this extension. So mixed versions of libraries can run concurrently
without any issues.
Thanks,
Eli and Matan
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYc9kSAAoJEEg/ir3gV/o+a0EH/jEGiopH7CHc4T4nXT1I4kQa
TicrkMNV3Sr9MBWwn8TLOyx+Fi1dex4cumrJI/BNVjC6h/nS6JHbslYoZxTkX9lT
L0vRsHJBVr/PODqimIGNnlJFBPhNJSGiHG4JHlJHlpvcGNahitN3gXmUjcRNju+V
ExnvgwWzAXM0qg1qWf5A/3HmqbtYES1rJXQUsimtc2QAif/SIayBD4fEA8x5zNBA
i0p8xcDrzUqmeblkpnsJA3w40s1rsuqvJnvLPDpbpKENtHfw1UFZ2987P7LvOrIv
NF/mZBkStC0gOZX6dLEAdoZXL1gTsJX19hTkUMfYH4BHqHARa2/oCS3wcCf1Giw=
=C+cp
-----END PGP SIGNATURE-----
Merge tag 'mlx5-4kuar-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5 4K UAR
The following series of patches optimizes the usage of the UAR area which is
contained within the BAR 0-1. Previous versions of the firmware and the driver
assumed each system page contains a single UAR. This patch set will query the
firmware for a new capability that if published, means that the firmware can
support UARs of fixed 4K regardless of system page size. In the case of
powerpc, where page size equals 64KB, this means we can utilize 16 UARs per
system page. Since user space processes by default consume eight UARs per
context this means that with this change a process will need a single system
page to fulfill that requirement and in fact make use of more UARs which is
better in terms of performance.
In addition to optimizing user-space processes, we introduce an allocator
that can be used by kernel consumers to allocate blue flame registers
(which are areas within a UAR that are used to write doorbells). This provides
further optimization on using the UAR area since the Ethernet driver makes
use of a single blue flame register per system page and now it will use two
blue flame registers per 4K.
The series also makes changes to naming conventions and now the terms used in
the driver code match the terms used in the PRM (programmers reference manual).
Thus, what used to be called UUAR (micro UAR) is now called BFREG (blue flame
register).
In order to support compatibility between different versions of
library/driver/firmware, the library has now means to notify the kernel driver
that it supports the new scheme and the kernel can notify the library if it
supports this extension. So mixed versions of libraries can run concurrently
without any issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller
commited |
bda65b4255 | |
Current check requests that new fields in struct
mlx5_ib_alloc_ucontext_req_v2 that are not known to the driver be zero.
This was introduced so new libraries passing additional information to
the kernel through struct mlx5_ib_alloc_ucontext_req_v2 will be notified
by old kernels that do not support their request by failing the
operation. This schecme is problematic since it requires libmlx5 to issue
the requests with descending input size for struct
mlx5_ib_alloc_ucontext_req_v2.
To avoid this, we require that new features that will obey the following
rules:
If the feature requires one or more fields in the response and the at
least one of the fields can be encoded such that a zero value means the
kernel ignored the request then this field will provide the indication
to the library. If no response is required or if zero is a valid
response, a new field should be added that indicates to the library
whether its request was processed.
Fixes:
Eli Cohen
authored and
Saeed Mahameed
commited |
b037c29a80 | |
Here is an implementation of an allocator that allocates blue flame registers. A blue flame register is used for generating send doorbells. A blue flame register can be used to generate either a regular doorbell or a blue flame doorbell where the data to be sent is written to the device's I/O memory hence saving the need to read the data from memory. For blue flame kind of doorbells to succeed, the blue flame register need to be mapped as write combining. The user can specify what kind of send doorbells she wishes to use. If she requested write combining mapping but that failed, the allocator will fall back to non write combining mapping and will indicate that to the user. Subsequent patches in this series will make use of this allocator. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eli Cohen
authored and
 Leon Romanovsky
commited |
a6d51b6861 | |
This establishes a solid naming conventions for UARs. A UAR (User Access Region) can have size identical to a system page or can be fixed 4KB depending on a value queried by firmware. Each UAR always has 4 blue flame register which are used to post doorbell to send queue. In addition, a UAR has section used for posting doorbells to CQs or EQs. In this patch we change names to reflect this conventions. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eli Cohen
authored and
Leon Romanovsky
commited |
2f5ff26478 | |
|
David S. Miller
commited |
76eb75be79 | |
* Update page fault event according to last specification. * Separate code path for page fault EQ, completion EQ and async EQ. * Move page fault handling work queue from mlx5_ib static variable into mlx5_core page fault EQ. * Allocate memory to store ODP event dynamically as the events arrive, since in atomic context - use mempool. * Make mlx5_ib page fault handler run in process context. Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> 
Artemy Kovalyov
authored and
David S. Miller
commited |
d9aaed8387 | |
This reverts commit
Gal Pressman
authored and
David S. Miller
commited |
1efbd205b3 | |
Add the needed infrastructure for future use of MPCNT register. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Gal Pressman
authored and
David S. Miller
commited |
7f503169ca | |
Add hardware structures and constants definitions needed for module events support. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Huy Nguyen
authored and
David S. Miller
commited |
4ce3bf2fa8 | |
I am hitting this in mlx5:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function
reclaim_pages_cmd.clone.0:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:346: error: call
to __compiletime_assert_346 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_out, pas[i]) % 64
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c: In function give_pages:
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:291: error: call
to __compiletime_assert_291 declared with attribute error:
BUILD_BUG_ON failed: __mlx5_bit_off(manage_pages_in, pas[i]) % 64
Problem is that this is doing a BUILD_BUG_ON on a non-constant
expression because of trying to take offset of pas[i] in the
structure.
Fix is to create MLX5_ARRAY_SET64 that takes an additional argument
that is the field index to separate between BUILD_BUG_ON on the array
constant field and the indexed field to assign the value to.
There are two callers of MLX5_SET64 that are trying to get a variable
offset, change those to call MLX5_ARRAY_SET64 passing 'pas' and 'i'
as the arguments to use in the offset check and the indexed value
assignment.
Fixes:
Tom Herbert
authored and
David S. Miller
commited |
b8a4ddb2e8 | |
Define needed hardware capabilities for sniffer RX and TX flow tables. Add the following capabilities: 1. Sniffer RX flow table capabilities. 2. Sniffer TX flow table capabilities. 3. If same TIR can be used by multiple flow tables of different types. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Maor Gottlieb
authored and
Leon Romanovsky
commited |
cea824d416 | |
Now as all commands use mlx5 ifc interface, instead of doing two calls for executing a command we embed command status checking into mlx5_cmd_exec to simplify the interface. Also we do here some cleanup for redundant software structures (inbox/outbox) and functions and improved command failure output. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Saeed Mahameed
authored and
Leon Romanovsky
commited |
c4f287c4a6 | |
Remove old representation of manually created MKey/PSV commands layout, and use mlx5_ifc canonical structures and defines. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Saeed Mahameed
authored and
Leon Romanovsky
commited |
ec22eb5310 | |
Remove old representation of manually created CQ commands layout, and use mlx5_ifc canonical structures and defines. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Saeed Mahameed
authored and
Leon Romanovsky
commited |
2782778663 | |
Remove old representation of manually created EQ commands layout, and use mlx5_ifc canonical structures and defines. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Saeed Mahameed
authored and
Leon Romanovsky
commited |
73b626c182 | |
Remove old representation of manually created ACCESS_REG/MAD_IFC commands layout and use mlx5_ifc canonical structures and defines. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
Saeed Mahameed
authored and
Leon Romanovsky
commited |
20ed51c643 |