mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-21 15:18:10 +07:00
| SHA1 | ||
|---|---|---|
I3C busses have to know about all I2C devices connected on the I3C bus to properly initialize the I3C master, and I2C frames can't be sent on the bus until this initialization is done. We can't let the I2C core parse the DT and instantiate I2C devices as part of its i2c_add_adapter() procedure because, when done this way, I2C devices are directly registered to the device-model and might be attached to drivers which could in turn start sending frames on the bus, which won't work since, as said above, the bus is not yet initialized. Export of_i2c_register_device() in order to let the I3C core parse the I2C device nodes by itself and initialize the bus. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Boris Brezillon
authored and
 Wolfram Sang
commited |
da0086d018 | |
The only user of i2c_board_info->archdata is the OF parsing code and it just pass a zero-initialized object which has the same effect as leaving ->archdata to NULL since the client object is allocated with kzalloc(). Get rid of this useless field. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Boris Brezillon
authored and
Wolfram Sang
commited |
4fad8868af | |
Can be used during probe to double check that the probed device is what is expected. Loosely based on code from Adrian Fiergolski <adrian.fiergolski@cern.ch>. Tested-by: Adrian Fiergolski <adrian.fiergolski@cern.ch> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Peter Rosin <peda@axentia.se> 
Peter Rosin
commited |
dde67eb1be | |
This will be needed when we want to create STOP conditions, too, later. Create the needed fields and populate them for the GPIO case if the GPIO is set to output. Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Wolfram Sang
commited |
8092178ffe | |
No reason to have them undefined, so let's add them. Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
6c92204e44 | |
"Used internally" is vague. What it actually means is that those fields are populated by the core if valid GPIOs are provided. Change the comments to reflect that. Tested-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
766a4f27f3 | |
Use the new helper to create variants of i2c_master_{send|recv} which
mark their buffers as DMA safe.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
ba98645c7d | |
Those two functions are very similar, the only differences are that one needs the I2C_M_RD flag for its message while the other one needs the buffer casted to drop the const. Introduce a generic helper which allows to specify the flags (also needed later for DMA safe variants of these calls) and let the casting be done in the inlining functions which are now calling the new helper function. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
8a91732b3b | |
One helper checks if DMA is suitable and optionally creates a bounce buffer, if not. The other function returns the bounce buffer and makes sure the data is properly copied back to the message. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
e94bc5d18b | |
Remove all reference to code related to using integer based ids for scl/sda gpio for bus recovery. All in tree drivers are now using the gpio descriptors to specific the required gpios. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Phil Reid <preid@electromag.com.au> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Phil Reid
authored and
Wolfram Sang
commited |
e1eb7d28c0 | |
Currently the i2c gpio recovery code uses gpio integer interface instead of the gpiod. This change switch the core code to use the gpiod while still retaining compatibility with the gpio integer interface. This will allow individual driver to be updated and tested individual to switch to using the gpiod interface. Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Phil Reid
authored and
Wolfram Sang
commited |
3991c5c80b | |
Using the macro IS_ENABLED to check the option CONFIG_I2C=(y|m) makes the code nicer. No functional change. Signed-off-by: Stefan Lengfeld <contact@stefanchrist.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Stefan Lengfeld
authored and
Wolfram Sang
commited |
901a891fa6 | |
For devices not instantiated through ACPI the i2c-client's device-name gets set to <busnr>-<addr> by default, e.g. "0-0022" this means that the device-name is dependent on the order in which the i2c-busses are enumerated. In some cases having a predictable constant device-name is desirable, for example on non device-tree platforms the link between a regulator and its consumers is specified by the platform code by setting regulator_init_data.consumers. This array identifies the regulator's consumers by dev_name and supply(-name). Which requires a constant dev_name. This commit adds a dev_name field to i2c_board_info allowing platform code to set a contstant dev_name so that the device can be identified by its dev_name in other platform code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mark Brown <broonie@kernel.org> (live at ELCE17) Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> (live at ELCE17) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Hans de Goede
authored and
Wolfram Sang
commited |
728fe6cef2 | |
Hopefully making clear that it is not needed for new drivers. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
9c80034921 | |
Drivers would like to call i2c_detect_slave_mode() even if !I2C_SLAVE.
Give them what they want to,
Otherwise kernel will not compile:
drivers/i2c/busses/i2c-designware-platdrv.c: In function ‘dw_i2c_plat_probe’:
drivers/i2c/busses/i2c-designware-platdrv.c:331:6: error: implicit declaration of function ‘i2c_detect_slave_mode’ [-Werror=implicit-function-declaration]
if (i2c_detect_slave_mode(&pdev->dev))
^~~~~~~~~~~~~~~~~~~~~
cc1: some warnings being treated as errors
Fixes:
Andy Shevchenko
authored and
Wolfram Sang
commited |
8f1a357d41 | |
Pull input subsystem updates from Dmitry Torokhov: - a big update from Mauro converting input documentation to ReST format - Synaptics PS/2 is now aware of SMBus companion devices, which means that we can now use native RMI4 protocol to handle touchpads, instead of relying on legacy PS/2 mode. - we removed support from BMA180 accelerometer from input devices as it is now handled properly by IIO - update to TSC2007 to corretcly report pressure - other miscellaneous driver fixes. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (152 commits) Input: ar1021_i2c - use BIT to check for a bit Input: twl4030-pwrbutton - use input_set_capability() helper Input: twl4030-pwrbutton - use correct device for irq request Input: ar1021_i2c - enable touch mode during open Input: add uinput documentation dt-bindings: input: add bindings document for ar1021_i2c driver dt-bindings: input: rotary-encoder: fix typo Input: xen-kbdfront - add module parameter for setting resolution ARM: pxa/raumfeld: fix compile error in rotary controller resources Input: xpad - do not suggest writing to Dominic Input: xpad - don't use literal blocks inside footnotes Input: xpad - note that usb/devices is now at /sys/kernel/debug/ Input: docs - freshen up introduction Input: docs - split input docs into kernel- and user-facing Input: docs - note that MT-A protocol is obsolete Input: docs - update joystick documentation a bit Input: docs - remove disclaimer/GPL notice Input: fix "Game console" heading level in joystick documentation Input: rotary-encoder - remove references to platform data from docs Input: move documentation for Amiga CD32 ... 
Linus Torvalds
commited |
16a12fa9ae | |
By default the i2c-core will try to get an irq with index 0 on ACPI / of instantiated devices. This is troublesome on some ACPI systems where the irq info at index 0 in the CRS table may contain nonsense and/or point to an irqchip for which there is no Linux driver. If this happens then before this commit the driver's probe method would never get called because i2c_device_probe will try to get an irq by calling acpi_dev_gpio_irq_get which will always return -EPROBE in this case, as it waits for a matching irqchip driver to load. Thus causing the driver to not get a chance to bind. This commit adds a new disable_i2c_core_irq_mapping flag to struct i2c_driver which a driver can set to tell the core to skip irq mapping. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Hans de Goede
authored and
Wolfram Sang
commited |
d1d84bb953 | |
By default the i2c subsys creates an i2c-client for the first I2cSerialBus
resource of an acpi_device, but some acpi_devices have multiple
I2cSerialBus resources and we may want to instantiate i2c-clients for
the others.
This commit adds a new i2c_acpi_new_device function which can be used to
create an i2c-client for any I2cSerialBus resource of an acpi_device.
Note that the other resources may even be on a different i2c bus, so just
retrieving the client address is not enough.
Here is an example DSDT excerpt from such a device:
Device (WIDR)
{
Name (_HID, "INT33FE" /* XPOWER Battery Device */)
Name (_CID, "INT33FE" /* XPOWER Battery Device */)
Name (_DDN, "WC PMIC Battery Device")
<snip>
Name (RBUF, ResourceTemplate ()
{
I2cSerialBusV2 (0x005E, ControllerInitiated, 0x000186A0,
AddressingMode7Bit, "\\_SB.PCI0.I2C7",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x0036, ControllerInitiated, 0x000186A0,
AddressingMode7Bit, "\\_SB.PCI0.I2C1",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x0022, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.PCI0.I2C1",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x0054, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.PCI0.I2C1",
0x00, ResourceConsumer, , Exclusive,
)
GpioInt (Level, ActiveLow, Exclusive, PullNone, 0x0000,
"\\_SB.PCI0.I2C7.PMI5", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0012
}
GpioInt (Edge, ActiveLow, ExclusiveAndWake, PullNone, 0x0000,
"\\_SB.GPO1", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0005
}
GpioInt (Level, ActiveLow, Exclusive, PullNone, 0x0000,
"\\_SB.PCI0.I2C7.PMI5", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0013
}
})
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Return (RBUF) /* \_SB_.PCI0.I2C7.WIDR.RBUF */
}
<snip>
}
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Hans de Goede
authored and
Wolfram Sang
commited |
605f8fc224 | |
Simple integer for interrupt number is not expressive enough, as it does not convey interrupt trigger type that should be used. Let's allow attaching array of resources to the board info and have i2c core parse first IRQ resource and set up interrupt trigger as needed. Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> 
Dmitry Torokhov
commited |
4124c4eba4 | |
i2c bus has 2 different types of device belonging to the same bus and bus notifiers use device type to distinguish between adapters and clients. Previously we only had i2c_adapter_type exported, which made code wanting to work with i2c_client devices test for type not equal to adapter type. This unfortunately is not safe if we ever add another type to the bus, so let's export i2c_client_type as well. Reviewed-by: Jean Delvare <jdelvare@suse.de> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Dmitry Torokhov
commited |
00a06c22e9 | |
Fix up missing #includes in other places that rely on sched.h doing that for them. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> 
Ingo Molnar
commited |
037741a6d4 | |
Pull i2c updates from Wolfram Sang: "I2C has for you two new drivers (Tegra BPMP and STM32F4), interrupt support for pca954x muxes, and a bunch of driver bugfixes and improvements. Nothing really special this cycle. A few commits have been added to my tree just recently. Those are the Tegra BPMP driver and a few straightforward bugfixes or cleanups which I prefer to have upstream rather soonish. The rest had proper linux-next exposure" * 'i2c/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (25 commits) i2c: thunderx: Replace pci_enable_msix() i2c: exynos5: fix arbitration lost handling i2c: exynos5: disable fifo-almost-empty irq signal when necessary i2c: at91: ensure state is restored after suspending i2c: bcm2835: Avoid possible NULL ptr dereference i2c: Add Tegra BPMP I2C proxy driver dt-bindings: Add Tegra186 BPMP I2C binding misc: eeprom: at24: use device_property_*() functions instead of of_get_property() i2c: mux: pca954x: Add interrupt controller support dt: bindings: i2c-mux-pca954x: Add documentation for interrupt controller i2c: mux: pca954x: Add missing pca9542 definition to chip_desc i2c: riic: correctly finish transfers i2c: i801: Add support for Intel Gemini Lake i2c: mux: pca9541: Export OF device ID table as module aliases i2c: mux: pca954x: Export OF device ID table as module aliases i2c: mux: mlxcpld: remove unused including <linux/version.h> i2c: busses: constify i2c_algorithm structures i2c: i2c-mux-gpio: rename i2c-gpio-mux to i2c-mux-gpio i2c: sh_mobile: document support for r8a7796 (R-Car M3-W) i2c: i2c-cros-ec-tunnel: Reduce logging noise ...
Linus Torvalds
commited |
7067739df2 | |
With many drivers converting to using generic device properties, it is useful to provide array of device properties when instantiating new i2c client via i2c_board_info and have them automatically added to the device in question. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dmitry Torokhov
authored and
 Rafael J. Wysocki
commited |
d3e1b617ae | |
This function has the purpose of mode detection by checking the device nodes for a reg matching with the I2C_OWN_SLAVE_ADDREESS flag. Currently only checks using OF functions (ACPI slave not supported yet). Signed-off-by: Luis Oliveira <lolivei@synopsys.com> Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Luis Oliveira
authored and
Wolfram Sang
commited |
cefae80249 | |
Falling back unconditionally to HostNotify as primary client's interrupt breaks some drivers which alter their functionality depending on whether interrupt is present or not, so let's introduce a board flag telling I2C core explicitly if we want wired interrupt or HostNotify-based one: I2C_CLIENT_HOST_NOTIFY. For DT-based systems we introduce "host-notify" property that we convert to I2C_CLIENT_HOST_NOTIFY board flag. Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Pali Rohár <pali.rohar@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Dmitry Torokhov
authored and
Wolfram Sang
commited |
331c342552 | |
The current SMBus Host Notify implementation relies on .alert() to relay its notifications. However, the use cases where SMBus Host Notify is needed currently is to signal data ready on touchpads. This is closer to an IRQ than a custom API through .alert(). Given that the 2 touchpad manufacturers (Synaptics and Elan) that use SMBus Host Notify don't put any data in the SMBus payload, the concept actually matches one to one. Benefits are multiple: - simpler code and API: the client will just have an IRQ, and nothing needs to be added in the adapter beside internally enabling it. - no more specific workqueue, the threading is handled by IRQ core directly (when required) - no more races when removing the device (the drivers are already required to disable irq on remove) - simpler handling for drivers: use plain regular IRQs - no more dependency on i2c-smbus for i2c-i801 (and any other adapter) - the IRQ domain is created automatically when the adapter exports the Host Notify capability - the IRQ are assign only if ACPI, OF and the caller did not assign one already - the domain is automatically destroyed on remove - fewer lines of code (minus 20, yeah!) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Benjamin Tissoires
authored and
Wolfram Sang
commited |
4d5538f588 | |
This will aid the seamless removal of the current probe()'s, more
commonly unused than used second parameter. Most I2C drivers can
simply switch over to the new interface, others which have DT
support can use its own matching instead and others can call
i2c_match_id() themselves. This brings I2C's device probe method
into line with other similar interfaces in the kernel and prevents
the requirement to pass an i2c_device_id table.
Suggested-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Kieran: fix rebase conflicts and adapt for dev_pm_domain_{attach,detach}]
Tested-by: Kieran Bingham <kieran@bingham.xyz>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Lee Jones
authored and
Wolfram Sang
commited |
b8a1a4cd5a | |
When there was no other way to match a I2C device to driver i2c_match_id() was exclusively used. However, now there are other types of tables which are commonly supplied, matching on an i2c_device_id table is used less frequently. Instead of _always_ calling i2c_match_id() from within the framework, we only need to do so from drivers which have no other way of matching. This patch makes i2c_match_id() available to the aforementioned device drivers. Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Tested-by: Kieran Bingham <kieran@bingham.xyz> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Lee Jones
authored and
Wolfram Sang
commited |
5f441fcaa3 | |
This function provides a single call for all I2C devices which need to match firstly using traditional OF means i.e by of_node, then if that fails we attempt to match using the supplied I2C client name with a list of supplied compatible strings with the '<vendor>,' string removed. The latter is required due to the unruly naming conventions used currently by I2C devices. Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Kieran: Fix static inline usage on !CONFIG_OF] Tested-by: Kieran Bingham <kieran@bingham.xyz> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Kieran Bingham <kieran@bingham.xyz> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Lee Jones
authored and
Wolfram Sang
commited |
298d4de1ed | |
For crazy setups in which an i2c gpio expander is behind an i2c gpio multiplexer controlled by a gpio provided a second expander using the same device driver we need to explicitly tell lockdep how to handle nested locking. Export i2c_adapter_depth() as public API to be reused outside of i2c core code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Peter Rosin <peda@axentia.se> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Bartosz Golaszewski
authored and
Wolfram Sang
commited |
8dd1fe1594 | |
This makes it trivial to constify them, so do that. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Peter Rosin
authored and
Wolfram Sang
commited |
d1ed7985b9 | |
ACPI 5 specification doesn't have property for the I2C bus speed but I2cSerialBus resource descriptor which define each controller-slave connection define the maximum speed supported by that connection. Thus finding the maximum safe speed for the bus is to walk through all I2cSerialBus resources that are associated to I2C controller and use the speed of slowest connection. Add function i2c_acpi_find_bus_speed() to the i2c-core that adapter drivers can call prior registering itself to core. This implies two-step walk through the I2cSerialBus resources: call to i2c_acpi_find_bus_speed() does the first scan and finds the safe bus speed that adapter drivers can set up. Adapter driver registration does the second scan when i2c-core creates the I2C slaves by calling the i2c_acpi_register_devices(). In that way the bus speed is set in case slave device probe gets called during registration and does communication. Previous version commit 
Jarkko Nikula
authored and
Wolfram Sang
commited |
5853b22d96 | |
This unifies usage with i2c_lock_bus and i2c_unlock_bus, and paves the way for the next patch which looks a bit saner with this preparatory work taken care of beforehand. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Peter Rosin
authored and
Wolfram Sang
commited |
fb79e09a74 | |
This reverts commit
Wolfram Sang
commited |
38d0fc4662 | |
ACPI 5 specification doesn't have property for the I2C bus speed but I2cSerialBus resource descriptors which define each controller-slave connection define the maximum speed supported by that connection. Thus finding the maximum safe speed for the bus is to walk all I2cSerialBus resources that are associated to I2C controller and use the speed of slowest connection. Add function i2c_acpi_find_bus_speed() to the i2c-core that adapter drivers can call prior registering itself to core. This implies two-step walk through the I2cSerialBus resources: call to i2c_acpi_find_bus_speed() does the first scan and finds the safe bus speed that adapter drivers can set up. Adapter driver registration does the second scan when i2c-core creates the I2C slaves by calling the i2c_acpi_register_devices(). In that way the bus speed is set in case slave device probe gets called during registration and does communication. Implement this by reusing the existing ACPI I2C walk routines in the i2c-core. Extend them so that slowest connection speed is saved during the walk and I2C slaves are registered only when calling through the i2c_acpi_register_devices() with the i2c_adapter pointer. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Jarkko Nikula
authored and
Wolfram Sang
commited |
55d38d060e | |
SMBus Host Notify allows a slave device to act as a master on a bus to notify the host of an interrupt. On Intel chipsets, the functionality is directly implemented in the firmware. We just need to export a function to call .alert() on the proper device driver. i2c_handle_smbus_host_notify() behaves like i2c_handle_smbus_alert(). When called, it schedules a task that will be able to sleep to go through the list of devices attached to the adapter. The current implementation allows one Host Notification to be scheduled while an other is running. Tested-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Benjamin Tissoires
authored and
Wolfram Sang
commited |
e456cd37bc | |
.alert() is meant to be generic, but there is currently no way for the device driver to know which protocol generated the alert. Add a parameter in .alert() to help the device driver to understand what is given in data. This patch is required to have the support of SMBus Host Notify protocol through .alert(). Tested-by: Andrew Duggan <aduggan@synaptics.com> For hwmon: Acked-by: Guenter Roeck <linux@roeck-us.net> For IPMI: Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Benjamin Tissoires
authored and
Wolfram Sang
commited |
b4f210541f | |
Some I2C devices have multiple addresses assigned, for example each address corresponding to a different internal register map page of the device. So far drivers which need support for this have handled this with a driver specific and non-generic implementation, e.g. passing the additional address via platform data. This patch provides a new helper function called i2c_new_secondary_device() which is intended to provide a generic way to get the secondary address as well as instantiate a struct i2c_client for the secondary address. The function expects a pointer to the primary i2c_client, a name for the secondary address and an optional default address. The name is used as a handle to specify which secondary address to get. The default address is used as a fallback in case no secondary address was explicitly specified. In case no secondary address and no default address were specified the function returns NULL. For now the function only supports look-up of the secondary address from devicetree, but it can be extended in the future to for example support board files and/or ACPI. Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@veo-labs.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Jean-Michel Hautbois
authored and
Wolfram Sang
commited |
0f614d834b | |
With a i2c topology like the following
GPIO ---| ------ BAT1
| v /
I2C -----+----------+---- MUX
| \
EEPROM ------ BAT2
there is a locking problem with the GPIO controller since it is a client
on the same i2c bus that it muxes. Transfers to the mux clients (e.g. BAT1)
will lock the whole i2c bus prior to attempting to switch the mux to the
correct i2c segment. In the above case, the GPIO device is an I/O expander
with an i2c interface, and since the GPIO subsystem knows nothing (and
rightfully so) about the lockless needs of the i2c mux code, this results
in a deadlock when the GPIO driver issues i2c transfers to modify the
mux.
So, observing that while it is needed to have the i2c bus locked during the
actual MUX update in order to avoid random garbage on the slave side, it
is not strictly a must to have it locked over the whole sequence of a full
select-transfer-deselect mux client operation. The mux itself needs to be
locked, so transfers to clients behind the mux are serialized, and the mux
needs to be stable during all i2c traffic (otherwise individual mux slave
segments might see garbage, or worse).
Introduce this new locking concept as "mux-locked" muxes, and call the
pre-existing mux locking scheme "parent-locked".
Modify the i2c mux locking so that muxes that are "mux-locked" locks only
the muxes on the parent adapter instead of the whole i2c bus when there is
a transfer to the slave side of the mux. This lock serializes transfers to
the slave side of the muxes on the parent adapter.
Add code to i2c-mux-gpio and i2c-mux-pinctrl that checks if all involved
gpio/pinctrl devices have a parent that is an i2c adapter in the same
adapter tree that is muxed, and request a "mux-locked mux" if that is the
case.
Modify the select-transfer-deselect code for "mux-locked" muxes so
that each of the select-transfer-deselect ops locks the mux parent
adapter individually.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Peter Rosin
authored and
Wolfram Sang
commited |
6ef91fcca8 | |
Add i2c_lock_bus() and i2c_unlock_bus(), which call the new lock_bus and unlock_bus ops in the adapter. These funcs/ops take an additional flags argument that indicates for what purpose the adapter is locked. There are two flags, I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT, but they are both implemented the same. For now. Locking the root adapter means that the whole bus is locked, locking the segment means that only the current bus segment is locked (i.e. i2c traffic on the parent side of a mux is still allowed even if the child side of the mux is locked). Also support a trylock_bus op (but no function to call it, as it is not expected to be needed outside of the i2c core). Implement i2c_lock_adapter/i2c_unlock_adapter in terms of the new locking scheme (i.e. lock with the I2C_LOCK_ROOT_ADAPTER flag). Locking the root adapter and locking the segment is the same thing for all root adapters (e.g. in the normal case of a simple topology with no i2c muxes). The two locking variants are also the same for traditional muxes (aka parent-locked muxes). These muxes traverse the tree, locking each level as they go until they reach the root. This patch is preparatory for a later patch in the series introducing mux-locked muxes, which behave differently depending on the requested locking. Since all current users are using i2c_lock_adapter, which is a wrapper for I2C_LOCK_ROOT_ADAPTER, we only need to annotate the calls that will not need to lock the root adapter for mux-locked muxes. I.e. the instances that needs to use I2C_LOCK_SEGMENT instead of i2c_lock_adapter/I2C_LOCK_ROOT_ADAPTER. Those instances are in the i2c_transfer and i2c_smbus_xfer functions, so that mux-locked muxes can single out normal i2c accesses to its slave side and adjust the locking for those accesses. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Peter Rosin
authored and
Wolfram Sang
commited |
8320f495cf | |
Drivers do this in various ways, let's use one standard way of doing it. Note: I2C_M_RD is bit 0, so the code could be simplified. To be extremly robust and to advertise good coding practices, I still use the ternary operator and let the compilers do the optimizing job. Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
a16d6ebca6 | |
In commit 
Paul Gortmaker
authored and
Wolfram Sang
commited |
c698d639f7 | |
Inspired from the i2c-rk3x driver (thanks guys!) but refactored and extended. See built-in docs for further information. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
e1dba01ca6 | |
This patch adds a i2c_check_quirks helper function to check the quirk flags of an i2c adapter, in a similar way to i2c_check_functionality. Signed-off-by: Nicola Corna <nicola@corna.info> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Nicola Corna
authored and
Wolfram Sang
commited |
cfa576db83 | |
Add I2C_AQ_NO_CLK_STRETCH quirk flag, to be used when clock stretching is not supported. Signed-off-by: Nicola Corna <nicola@corna.info> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Nicola Corna
authored and
Wolfram Sang
commited |
749de3dac5 | |
There are devices that need to handle block transactions regardless of the capabilities exported by the adapter. For performance reasons, they need to use i2c read blocks if available, otherwise emulate the block transaction with word or byte transactions. Add support for a helper function that would read a data block using the best transfer available: I2C_FUNC_SMBUS_READ_I2C_BLOCK, I2C_FUNC_SMBUS_READ_WORD_DATA or I2C_FUNC_SMBUS_READ_BYTE_DATA. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Irina Tirdea
authored and
Wolfram Sang
commited |
01eef96e37 | |
And update indentation with one more tab, sigh... Tested-by: Andrey Danin <danindrey@mail.ru> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang
commited |
c5ebb387f4 | |
of_find_i2c_adapter_by_node() call requires quite often missing
put_device(), and i2c_put_adapter() releases a device locked by
i2c_get_adapter() only. In general module_put(adapter->owner) and
put_device(dev) are not interchangeable.
This is a common error reproduction scenario as a result of the
misusage described above (for clearness this is run on iMX6 platform
with HDMI and I2C bus drivers compiled as kernel modules):
root@mx6q:~# lsmod | grep i2c
i2c_imx 10213 0
root@mx6q:~# lsmod | grep dw_hdmi_imx
dw_hdmi_imx 3631 0
dw_hdmi 11846 1 dw_hdmi_imx
imxdrm 8674 3 dw_hdmi_imx,imx_ipuv3_crtc,imx_ldb
drm_kms_helper 113765 5 dw_hdmi,imxdrm,imx_ipuv3_crtc,imx_ldb
root@mx6q:~# rmmod dw_hdmi_imx
root@mx6q:~# lsmod | grep i2c
i2c_imx 10213 -1
^^^^^
root@mx6q:~# rmmod i2c_imx
rmmod: ERROR: Module i2c_imx is in use
To fix existing users of these interfaces and to avoid any further
confusion and misusage in future, add one more interface
of_get_i2c_adapter_by_node(), it is similar to i2c_get_adapter() in
sense that an I2C bus device driver found and locked by user can be
correctly unlocked by i2c_put_adapter().
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Vladimir Zapolskiy
authored and
Wolfram Sang
commited |
48e9743dd6 | |
- Generic PM domains support update including new PM domain
callbacks to handle device initialization better (Russell King,
Rafael J Wysocki, Kevin Hilman).
- Unified device properties API update including a new mechanism
for accessing data provided by platform initialization code
(Rafael J Wysocki, Adrian Hunter).
- ARM cpuidle update including ARM32/ARM64 handling consolidation
(Daniel Lezcano).
- intel_idle update including support for the Silvermont Core in
the Baytrail SOC and for the Airmont Core in the Cherrytrail and
Braswell SOCs (Len Brown, Mathias Krause).
- New cpufreq driver for Hisilicon ACPU (Leo Yan).
- intel_pstate update including support for the Knights Landing
chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi).
- QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann).
- powernv cpufreq driver update (Shilpasri G Bhat).
- devfreq update including Tegra support changes (Tomeu Vizoso,
MyungJoo Ham, Chanwoo Choi).
- powercap RAPL (Running-Average Power Limit) driver update
including support for Intel Broadwell server chips (Jacob Pan,
Mathias Krause).
- ACPI device enumeration update related to the handling of the
special PRP0001 device ID allowing DT-style 'compatible' property
to be used for ACPI device identification (Rafael J Wysocki).
- ACPI EC driver update including limited _DEP support (Lan Tianyu,
Lv Zheng).
- ACPI backlight driver update including a new mechanism to allow
native backlight handling to be forced on non-Windows 8 systems
and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede).
- New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu).
- Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki).
- Fixes related to suspend-to-idle for the iTCO watchdog driver and
the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu).
- PM tracing support for the suspend phase of system suspend/resume
transitions (Zhonghui Fu).
- Configurable delay for the system suspend/resume testing facility
(Brian Norris).
- PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki).
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=erd3
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups all over, although there are a few
items that sort of fall into the new feature category.
First off, we have new callbacks for PM domains that should help us to
handle some issues related to device initialization in a better way.
There also is some consolidation in the unified device properties API
area allowing us to use that inferface for accessing data coming from
platform initialization code in addition to firmware-provided data.
We have some new device/CPU IDs in a few drivers, support for new
chips and a new cpufreq driver too.
Specifics:
- Generic PM domains support update including new PM domain callbacks
to handle device initialization better (Russell King, Rafael J
Wysocki, Kevin Hilman)
- Unified device properties API update including a new mechanism for
accessing data provided by platform initialization code (Rafael J
Wysocki, Adrian Hunter)
- ARM cpuidle update including ARM32/ARM64 handling consolidation
(Daniel Lezcano)
- intel_idle update including support for the Silvermont Core in the
Baytrail SOC and for the Airmont Core in the Cherrytrail and
Braswell SOCs (Len Brown, Mathias Krause)
- New cpufreq driver for Hisilicon ACPU (Leo Yan)
- intel_pstate update including support for the Knights Landing chip
(Dasaratharaman Chandramouli, Kristen Carlson Accardi)
- QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann)
- powernv cpufreq driver update (Shilpasri G Bhat)
- devfreq update including Tegra support changes (Tomeu Vizoso,
MyungJoo Ham, Chanwoo Choi)
- powercap RAPL (Running-Average Power Limit) driver update including
support for Intel Broadwell server chips (Jacob Pan, Mathias Krause)
- ACPI device enumeration update related to the handling of the
special PRP0001 device ID allowing DT-style 'compatible' property
to be used for ACPI device identification (Rafael J Wysocki)
- ACPI EC driver update including limited _DEP support (Lan Tianyu,
Lv Zheng)
- ACPI backlight driver update including a new mechanism to allow
native backlight handling to be forced on non-Windows 8 systems and
a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede)
- New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu)
- Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger,
Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki)
- Fixes related to suspend-to-idle for the iTCO watchdog driver and
the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu)
- PM tracing support for the suspend phase of system suspend/resume
transitions (Zhonghui Fu)
- Configurable delay for the system suspend/resume testing facility
(Brian Norris)
- PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)"
* tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
ACPI / scan: Fix NULL pointer dereference in acpi_companion_match()
ACPI / scan: Rework modalias creation when "compatible" is present
intel_idle: mark cpu id array as __initconst
powercap / RAPL: mark rapl_ids array as __initconst
powercap / RAPL: add ID for Broadwell server
intel_pstate: Knights Landing support
intel_pstate: remove MSR test
cpufreq: fix qoriq uniprocessor build
ACPI / scan: Take the PRP0001 position in the list of IDs into account
ACPI / scan: Simplify acpi_match_device()
ACPI / scan: Generalize of_compatible matching
device property: Introduce firmware node type for platform data
device property: Make it possible to use secondary firmware nodes
PM / watchdog: iTCO: stop watchdog during system suspend
cpufreq: hisilicon: add acpu driver
ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler
cpufreq: powernv: Report cpu frequency throttling
intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs
intel_idle: Update support for Silvermont Core in Baytrail SOC
PM / devfreq: tegra: Register governor on module init
...
Linus Torvalds
commited |
2481bc7528 | |
This patch changes type of input parameter for prepare/unprepare_recovery() callbacks from struct i2c_bus_recovery_info * to struct i2c_adapter *. This allows to simplify implementation of these callbacks and avoid type conversations from i2c_bus_recovery_info to i2c_adapter. The i2c_bus_recovery_info can be simply retrieved from struct i2c_adapter which contains pointer on it. There are no users currently, so this is safe to do. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> 
Grygorii Strashko
authored and
Wolfram Sang
commited |
2b2190a375 |