mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-11-21 00:46:59 +07:00
| Message | SHA1 | |
|---|---|---|
x86/smpboot: Move apic init code to apic.c
We better provide proper functions which implement the required code flow in the apic code rather than letting the smpboot code open code it. That allows to make more functions static and confines the APIC functionality to apic.c where it belongs. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211703.907616730@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
05f7e46d2a | |
x86/x2apic: Split enable and setup function
enable_x2apic() is a convoluted unreadable mess because it is used for both enablement in early boot and for setup in cpu_init(). Split the code into x2apic_enable() for enablement and x2apic_setup() for setup of (secondary cpus). Make use of the new state tracking to simplify the logic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.129287153@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
659006bf3a | |
x86/x2apic: Disable x2apic from nox2apic setup
There is no point in postponing the hardware disablement of x2apic. It can be disabled right away in the nox2apic setup function. Disable it right away and set the state to DISABLED . This allows to remove all the nox2apic conditionals all over the place. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211703.051214090@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
44e25ff9e6 | |
x86/x2apic: Move code in conditional region
No point in having try_to_enable_x2apic() outside of the CONFIG_X86_X2APIC section and having inline functions and more ifdefs to deal with it. Move the code into the existing ifdef section and remove the inline cruft. Fixup the printk about not enabling interrupt remapping as suggested by Boris. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.795388613@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
55eae7de72 | |
x86/apic: Check x2apic early
No point in delaying the x2apic detection for the CONFIG_X86_X2APIC=n case to enable_IR_x2apic(). We rather detect that before we try to setup anything there. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.702479404@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
d524165cb8 | |
x86/ioapic: Check x2apic really
The x2apic_preenabled flag is just a horrible hack and if X2APIC support is disabled it does not reflect the actual hardware state. Check the hardware instead. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/r/20150115211702.541280622@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
2ca5b40479 | |
x86/apic: Make x2apic_mode depend on CONFIG_X86_X2APIC
No point in having a static variable around which is always 0. Let the compiler optimize code out if disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.363274310@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
81a46dd824 | |
x86/apic: Avoid open coded x2apic detection
enable_IR_x2apic() grew a open coded x2apic detection. Implement a proper helper function which shares the code with the already existing x2apic_enabled(). Made it use rdmsrl_safe as suggested by Boris. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/20150115211702.285038186@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
8d80696060 | |
Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/apic updates from Thomas Gleixner:
"This is a major overhaul to the x86 apic subsystem consisting of the
following parts:
- Remove obsolete APIC driver abstractions (David Rientjes)
- Use the irqdomain facilities to dynamically allocate IRQs for
IOAPICs. This is a prerequisite to enable IOAPIC hotplug support,
and it also frees up wasted vectors (Jiang Liu)
- Misc fixlets.
Despite the hickup in Ingos previous pull request - caused by the
missing fixup for the suspend/resume issue reported by Borislav - I
strongly recommend that this update finds its way into 3.17. Some
history for you:
This is preparatory work for physical IOAPIC hotplug. The first
attempt to support this was done by Yinghai and I shot it down because
it just added another layer of obscurity and complexity to the already
existing mess without tackling the underlying shortcomings of the
current implementation.
After quite some on- and offlist discussions, I requested that the
design of this functionality must use generic infrastructure, i.e.
irq domains, which provide all the mechanisms to dynamically map linux
interrupt numbers to physical interrupts.
Jiang picked up the idea and did a great job of consolidating the
existing interfaces to manage the x86 (IOAPIC) interrupt system by
utilizing irq domains.
The testing in tip, Linux-next and inside of Intel on various machines
did not unearth any oddities until Borislav exposed it to one of his
oddball machines. The issue was resolved quickly, but unfortunately
the fix fell through the cracks and did not hit the tip tree before
Ingo sent the pull request. Not entirely Ingos fault, I also assumed
that the fix was already merged when Ingo asked me whether he could
send it.
Nevertheless this work has a proper design, has undergone several
rounds of review and the final fallout after applying it to tip and
integrating it into Linux-next has been more than moderate. It's the
ground work not only for IOAPIC hotplug, it will also allow us to move
the lowlevel vector allocation into the irqdomain hierarchy, which
will benefit other architectures as well. Patches are posted already,
but they are on hold for two weeks, see below.
I really appreciate the competence and responsiveness Jiang has shown
in course of this endavour. So I'm sure that any fallout of this will
be addressed in a timely manner.
FYI, I'm vanishing for 2 weeks into my annual kids summer camp kitchen
duty^Wvacation, while you folks are drooling at KS/LinuxCon :) But HPA
will have a look at the hopefully zero fallout until I'm back"
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
x86, irq, PCI: Keep IRQ assignment for PCI devices during suspend/hibernation
x86/apic/vsmp: Make is_vsmp_box() static
x86, apic: Remove enable_apic_mode callback
x86, apic: Remove setup_portio_remap callback
x86, apic: Remove multi_timer_check callback
x86, apic: Replace noop_check_apicid_used
x86, apic: Remove check_apicid_present callback
x86, apic: Remove mps_oem_check callback
x86, apic: Remove smp_callin_clear_local_apic callback
x86, apic: Replace trampoline physical addresses with defaults
x86, apic: Remove x86_32_numa_cpu_node callback
x86: intel-mid: Use the new io_apic interfaces
x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
x86, irq: Clean up irqdomain transition code
x86, irq, devicetree: Release IOAPIC pin when PCI device is disabled
x86, irq, SFI: Release IOAPIC pin when PCI device is disabled
x86, irq, mpparse: Release IOAPIC pin when PCI device is disabled
x86, irq, ACPI: Release IOAPIC pin when PCI device is disabled
x86, irq: Introduce helper functions to release IOAPIC pin
x86, irq: Simplify the way to handle ISA IRQ
...
|
81c02a21b2 | |
x86, apic: Remove enable_apic_mode callback
The enable_apic_mode() apic callback is never called, so remove it. Signed-off-by: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302352320.17503@chino.kir.corp.google.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
2f078b9cb8 | |
x86, apic: Remove setup_portio_remap callback
Since commit
|
11a8318ef5 | |
x86, apic: Remove multi_timer_check callback
Since commit
|
e76661ba09 | |
x86, apic: Remove check_apicid_present callback
The check_apicid_present() apic callback is never called, so remove it and functions that implement it. Signed-off-by: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302350160.17503@chino.kir.corp.google.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
658ffd7e6f | |
x86, apic: Remove mps_oem_check callback
Since commit
|
c460b5d340 | |
x86, apic: Remove smp_callin_clear_local_apic callback
Since commit
|
300eddf967 | |
x86, apic: Replace trampoline physical addresses with defaults
The trampoline_phys_{high,low} members of struct apic are always
initialized to DEFAULT_TRAMPOLINE_PHYS_HIGH and TRAMPOLINE_PHYS_LOW,
respectively. Hardwire the constants and remove the unneeded members.
Signed-off-by: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1407302348330.17503@chino.kir.corp.google.com
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
|
6ab1b27c84 | |
x86, apic: Remove x86_32_numa_cpu_node callback
Since commit
|
80a2670379 | |
x86, vsmp: Remove is_vsmp_box() from apic_is_clustered_box()
When a vSMP Foundation box is detected, the function apic_cluster_num() counts the number of APIC clusters found. If more than one found, a multi board configuration is assumed, and TSC marked as unstable. This behavior is incorrect as vSMP Foundation may use processors from single node only, attached to memory of other nodes - and such node may have more than one APIC cluster (typically any recent intel box has more than single APIC_CLUSTERID(x)). To fix this, we simply remove the code which detects a vSMP Foundation box and affects apic_is_clusted_box() return value. This can be done because later the kernel checks by itself if the TSC is stable using the check_tsc_sync_[source|target]() functions and marks TSC as unstable if needed. Acked-by: Shai Fultheim <shai@scalemp.com> Signed-off-by: Oren Twaig <oren@scalemp.com> Link: http://lkml.kernel.org/r/1404036068-11674-1-git-send-email-oren@scalemp.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> |
411cf9ee29 | |
x86, mpparse: Simplify arch/x86/include/asm/mpspec.h
Simplify arch/x86/include/asm/mpspec.h by 1) Change max_physical_apicid to static as it's only used in apic.c. 2) Kill declaration of mpc_default_type, it's never defined. 3) Delete default_acpi_madt_oem_check(), it has already been declared in apic.h. 4) Make default_acpi_madt_oem_check() depends on CONFIG_X86_LOCAL_APIC instead of CONFIG_X86_64 to support i386. 5) Change mp_override_legacy_irq(), mp_config_acpi_legacy_irqs() and mp_register_gsi() as static because they are only used in acpi/boot.c. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Richard Weinberger <richard@nod.at> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1402302011-23642-4-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> |
a491cc902c | |
x86, cpufeature: Convert more "features" to bugs
X86_FEATURE_FXSAVE_LEAK, X86_FEATURE_11AP and X86_FEATURE_CLFLUSH_MONITOR are not really features but synthetic bits we use for applying different bug workarounds. Call them what they really are, and make sure they get the proper cross-CPU behavior (OR rather than AND). Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1403042783-23278-1-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
9b13a93df2 | |
x86/apic: Always define nox2apic and define it as initdata
The "nox2apic" variable can be defined as __initdata since it is only used for bootstrap. It can now unconditionally be defined since it will later be freed. At the same time, it is also better off as a bool. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402042354380.7839@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
dc9788f40a | |
x86/apic: Remove unused function prototypes
Some function prototypes declared in asm/apic.h are never defined, so remove them. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402042354210.7839@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
6d4989835e | |
x86/apic: Switch wait_for_init_deassert() to a bool flag
Now that there is only a single wait_for_init_deassert() function, just convert the member of struct apic to a bool to determine whether we need to wait for init_deassert to become non-zero. There are no more callers of default_wait_for_init_deassert(), so fold it into the caller. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402042354010.7839@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
465822cfc8 | |
x86/apic: Only use default_wait_for_init_deassert()
es7000_wait_for_init_deassert() is functionally equivalent to default_wait_for_init_deassert(), so remove the duplicate code and use only a single function. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1402042353030.7839@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
d3c63ae1e2 | |
x86/ioapic/kcrash: Prevent crash_kexec() from deadlocking on ioapic_lock
Prevent crash_kexec() from deadlocking on ioapic_lock. When
crash_kexec() is executed on a CPU, the CPU will take ioapic_lock
in disable_IO_APIC(). So if the cpu gets an NMI while locking
ioapic_lock, a deadlock will happen.
In this patch, ioapic_lock is zapped/initialized before disable_IO_APIC().
You can reproduce this deadlock the following way:
1. Add mdelay(1000) after raw_spin_lock_irqsave() in
native_ioapic_set_affinity()@arch/x86/kernel/apic/io_apic.c
Although the deadlock can occur without this modification, it will increase
the potential of the deadlock problem.
2. Build and install the kernel
3. Set up the OS which will run panic() and kexec when NMI is injected
# echo "kernel.unknown_nmi_panic=1" >> /etc/sysctl.conf
# vim /etc/default/grub
add "nmi_watchdog=0 crashkernel=256M" in GRUB_CMDLINE_LINUX line
# grub2-mkconfig
4. Reboot the OS
5. Run following command for each vcpu on the guest
# while true; do echo <CPU num> > /proc/irq/<IO-APIC-edge or IO-APIC-fasteoi>/smp_affinitity; done;
By running this command, cpus will get ioapic_lock for setting affinity.
6. Inject NMI (push a dump button or execute 'virsh inject-nmi <domain>' if you
use VM). After injecting NMI, panic() is called in an nmi-handler context.
Then, kexec will normally run in panic(), but the operation will be stopped
by deadlock on ioapic_lock in crash_kexec()->machine_crash_shutdown()->
native_machine_crash_shutdown()->disable_IO_APIC()->clear_IO_APIC()->
clear_IO_APIC_pin()->ioapic_read_entry().
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: yrl.pp-manager.tt@hitachi.com
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/20130820070107.28245.83806.stgit@yunodevel
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
17405453f4 | |
x86, trace: Introduce entering/exiting_irq()
When implementing tracepoints in interrupt handers, if the tracepoints are
simply added in the performance sensitive path of interrupt handers,
it may cause potential performance problem due to the time penalty.
To solve the problem, an idea is to prepare non-trace/trace irq handers and
switch their IDTs at the enabling/disabling time.
So, let's introduce entering_irq()/exiting_irq() for pre/post-
processing of each irq handler.
A way to use them is as follows.
Non-trace irq handler:
smp_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
exiting_irq(); /* post-processing of this handler */
}
Trace irq_handler:
smp_trace_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
trace_irq_entry(); /* tracepoint for irq entry */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
trace_irq_exit(); /* tracepoint for irq exit */
exiting_irq(); /* post-processing of this handler */
}
If tracepoints can place outside entering_irq()/exiting_irq() as follows,
it looks cleaner.
smp_trace_irq_handler()
{
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
}
But it doesn't work.
The problem is with irq_enter/exit() being called. They must be called before
trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before
any tracepoints are used, as tracepoints use rcu to synchronize.
As a possible alternative, we may be able to call irq_enter() first as follows
if irq_enter() can nest.
smp_trace_irq_hander()
{
irq_entry();
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
irq_exit();
}
But it doesn't work, either.
If irq_enter() is nested, it may have a time penalty because it has to check if it
was already called or not. The time penalty is not desired in performance sensitive
paths even if it is tiny.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
|
eddc0e922a | |
sections: fix section conflicts in arch/x86
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
75fdd155ea | |
Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/mm changes from Peter Anvin: "The big change here is the patchset by Alex Shi to use INVLPG to flush only the affected pages when we only need to flush a small page range. It also removes the special INVALIDATE_TLB_VECTOR interrupts (32 vectors!) and replace it with an ordinary IPI function call." Fix up trivial conflicts in arch/x86/include/asm/apic.h (added code next to changed line) * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tlb: Fix build warning and crash when building for !SMP x86/tlb: do flush_tlb_kernel_range by 'invlpg' x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR x86/tlb: enable tlb flush range support for x86 mm/mmu_gather: enable tlb flush range in generic mmu_gather x86/tlb: add tlb_flushall_shift knob into debugfs x86/tlb: add tlb_flushall_shift for specific CPU x86/tlb: fall back to flush all when meet a THP large page x86/flush_tlb: try flush_tlb_single one by one in flush_tlb_range x86/tlb_info: get last level TLB entry number of CPU x86: Add read_mostly declaration/definition to variables from smp.h x86: Define early read-mostly per-cpu macros |
4cb38750d4 | |
KVM updates for the 3.6 merge window
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=pECD
-----END PGP SIGNATURE-----
Merge tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Avi Kivity:
"Highlights include
- full big real mode emulation on pre-Westmere Intel hosts (can be
disabled with emulate_invalid_guest_state=0)
- relatively small ppc and s390 updates
- PCID/INVPCID support in guests
- EOI avoidance; 3.6 guests should perform better on 3.6 hosts on
interrupt intensive workloads)
- Lockless write faults during live migration
- EPT accessed/dirty bits support for new Intel processors"
Fix up conflicts in:
- Documentation/virtual/kvm/api.txt:
Stupid subchapter numbering, added next to each other.
- arch/powerpc/kvm/booke_interrupts.S:
PPC asm changes clashing with the KVM fixes
- arch/s390/include/asm/sigp.h, arch/s390/kvm/sigp.c:
Duplicated commits through the kvm tree and the s390 tree, with
subsequent edits in the KVM tree.
* tag 'kvm-3.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
KVM: fix race with level interrupts
x86, hyper: fix build with !CONFIG_KVM_GUEST
Revert "apic: fix kvm build on UP without IOAPIC"
KVM guest: switch to apic_set_eoi_write, apic_write
apic: add apic_set_eoi_write for PV use
KVM: VMX: Implement PCID/INVPCID for guests with EPT
KVM: Add x86_hyper_kvm to complete detect_hypervisor_platform check
KVM: PPC: Critical interrupt emulation support
KVM: PPC: e500mc: Fix tlbilx emulation for 64-bit guests
KVM: PPC64: booke: Set interrupt computation mode for 64-bit host
KVM: PPC: bookehv: Add ESR flag to Data Storage Interrupt
KVM: PPC: bookehv64: Add support for std/ld emulation.
booke: Added crit/mc exception handler for e500v2
booke/bookehv: Add host crit-watchdog exception support
KVM: MMU: document mmu-lock and fast page fault
KVM: MMU: fix kvm_mmu_pagetable_walk tracepoint
KVM: MMU: trace fast page fault
KVM: MMU: fast path of handling guest page fault
KVM: MMU: introduce SPTE_MMU_WRITEABLE bit
KVM: MMU: fold tlb flush judgement into mmu_spte_update
...
|
5fecc9d8f5 | |
Revert "apic: fix kvm build on UP without IOAPIC"
This reverts commit
|
ebf7d2e993 | |
apic: add apic_set_eoi_write for PV use
KVM PV EOI optimization overrides eoi_write apic op with its own version. Add an API for this to avoid meddling with core x86 apic driver data structures directly. For KVM use, we don't need any guarantees about when the switch to the new op will take place, so it could in theory use this API after SMP init, but it currently doesn't, and restricting callers to early init makes it clear that it's safe as it won't race with actual APIC driver use. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Avi Kivity <avi@redhat.com> |
1551df646d | |
x86/apic/x2apic: Limit the vector reservation to the user specified mask
For the x2apic cluster mode, vector for an interrupt is currently reserved on all the cpu's that are part of the x2apic cluster. But the interrupts will be routed only to the cluster (derived from the first cpu in the mask) members specified in the mask. So there is no need to reserve the vector in the unused cluster members. Modify __assign_irq_vector() to reserve the vectors based on the user specified irq destination mask. If the new mask is a proper subset of the currently used mask, cleanup the vector allocation on the unused cpu members. Also, allow the apic driver to tune the vector domain based on the affinity mask (which in most cases is the user-specified mask). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Link: http://lkml.kernel.org/r/1340656709-11423-3-git-send-email-suresh.b.siddha@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
1ac322d0b1 | |
x86/apic: Optimize cpu traversal in __assign_irq_vector() using domain membership
Currently __assign_irq_vector() goes through each cpu in the specified mask until it finds a free vector in all the cpu's that are part of the same interrupt domain. We visit all the interrupt domain sibling cpus to reserve the free vector. So, when we fail to find a free vector in an interrupt domain, it is safe to continue our search with a cpu belonging to a new interrupt domain. No need to go through each cpu, if the domain containing that cpu is already visited. Use the irq_cfg's old_domain to track the visited domains and optimize the cpu traversal while finding a free vector in the given cpumask. NOTE: We can also optimize the search by using for_each_cpu() and skip the current cpu, if it is not the first cpu in the mask returned by the vector_allocation_domain(). But re-using the cfg->old_domain to track the visited domains will be slightly faster. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Link: http://lkml.kernel.org/r/1340656709-11423-2-git-send-email-suresh.b.siddha@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
b39f25a849 | |
apic: fix kvm build on UP without IOAPIC
On UP i386, when APIC is disabled # CONFIG_X86_UP_APIC is not set # CONFIG_PCI_IOAPIC is not set code looking at apicdrivers never has any effect but it still gets compiled in. In particular, this causes build failures with kvm, but it generally bloats the kernel unnecessarily. Fix by defining both __apicdrivers and __apicdrivers_end to be NULL when CONFIG_X86_LOCAL_APIC is unset: I verified that as the result any loop scanning __apicdrivers gets optimized out by the compiler. Warning: a .config with apic disabled doesn't seem to boot for me (even without this patch). Still verifying why, meanwhile this patch is compile-tested only. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> |
f9808b7fd4 | |
x86/apic: Eliminate cpu_mask_to_apicid() operation
Since there are only two locations where cpu_mask_to_apicid() is called from, remove the operation and use only cpu_mask_to_apicid_and() instead. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Suggested-and-acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120614074935.GE3383@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
a5a391561b | |
x86: Add read_mostly declaration/definition to variables from smp.h
Add "read-mostly" qualifier to the following variables in smp.h: - cpu_sibling_map - cpu_core_map - cpu_llc_shared_map - cpu_llc_id - cpu_number - x86_cpu_to_apicid - x86_bios_cpu_apicid - x86_cpu_to_logical_apicid As long as all the variables above are only written during the initialization, this change is meant to prevent the false sharing. More specifically, on vSMP Foundation platform x86_cpu_to_apicid shared the same internode_cache_line with frequently written lapic_events. From the analysis of the first 33 per_cpu variables out of 219 (memories they describe, to be more specific) the 8 have read_mostly nature (tlb_vector_offset, cpu_loops_per_jiffy, xen_debug_irq, etc.) and 25 are frequently written (irq_stack_union, gdt_page, exception_stacks, idt_desc, etc.). Assuming that the spread of the rest of the per_cpu variables is similar, identifying the read mostly memories will make more sense in terms of long-term code maintenance comparing to identifying frequently written memories. Signed-off-by: Vlad Zolotarov <vlad@scalemp.com> Acked-by: Shai Fultheim <shai@scalemp.com> Cc: Shai Fultheim (Shai@ScaleMP.com) <Shai@scalemp.com> Cc: ido@wizery.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1719258.EYKzE4Zbq5@vlad Signed-off-by: Ingo Molnar <mingo@kernel.org> |
0816b0f036 | |
x86/apic: Make cpu_mask_to_apicid() operations check cpu_online_mask
Currently cpu_mask_to_apicid() should not get a offline CPU with the cpumask. Otherwise some apic drivers might try to access non-existent per-cpu variables (i.e. x2apic). In that regard cpu_mask_to_apicid() and cpu_mask_to_apicid_and() operations are inconsistent. This fix makes the two operations do not rely on calling functions and always return the apicid for only online CPUs. As result, the meaning and implementations of cpu_mask_to_apicid() and cpu_mask_to_apicid_and() operations become straight. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120607131624.GG4759@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
4988a40c39 | |
x86/apic: Make cpu_mask_to_apicid() operations return error code
Current cpu_mask_to_apicid() and cpu_mask_to_apicid_and()
implementations have few shortcomings:
1. A value returned by cpu_mask_to_apicid() is written to
hardware registers unconditionally. Should BAD_APICID get ever
returned it will be written to a hardware too. But the value of
BAD_APICID is not universal across all hardware in all modes and
might cause unexpected results, i.e. interrupts might get routed
to CPUs that are not configured to receive it.
2. Because the value of BAD_APICID is not universal it is
counter- intuitive to return it for a hardware where it does not
make sense (i.e. x2apic).
3. cpu_mask_to_apicid_and() operation is thought as an
complement to cpu_mask_to_apicid() that only applies a AND mask
on top of a cpumask being passed. Yet, as consequence of
|
ff16432412 | |
x86/apic: Avoid useless scanning thru a cpumask in assign_irq_vector()
In case of static vector allocation domains (i.e. flat) if all vector numbers are exhausted, an attempt to assign a new vector will lead to useless scans through all CPUs in the cpumask, even though it is known that each new pass would fail. Make this corner case less painful by letting report whether the vector allocation domain depends on passed arguments or not and stop scanning early. The same could have been achived by introducing a static flag to the apic operations. But let's allow vector_allocation_domain() have more intelligence here and decide dynamically, in case we would need it in the future. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120607131542.GE4759@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
8637e38aff | |
x86/apic: Factor out default vector_allocation_domain() operation
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120607131449.GC4759@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
9d8e106676 | |
x86/apic: Factor out default cpu_mask_to_apicid() operations
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120605112340.GA11454@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
6398268d2b | |
x86/apic: Factor out default target_cpus() operation
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120605112324.GA11449@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
bf721d3a3b | |
x86/apic: Implement EIO micro-optimization
We know both register and value for eoi beforehand, so there's no need to check it and no need to do math to calculate the msr. Saves instructions/branches on each EOI when using x2apic. I looked at the objdump output to verify that the generated code looks right and actually is shorter. The real improvemements will be on the KVM guest side though, those come in a later patch. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/e019d1a125316f10d3e3a4b2f6bda41473f4fb72.1337184153.git.mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
0ab711ae6a | |
x86/apic: Add apic->eoi_write() callback
Add eoi_write callback so that kvm can override eoi accesses without touching the rest of the apic. As a side-effect, this will enable a micro-optimization for apics using msr. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/0df425d746c49ac2ecc405174df87752869629d2.1337184153.git.mst@redhat.com [ tidied it up a bit ] Signed-off-by: Ingo Molnar <mingo@kernel.org> |
2a43195d83 | |
x86/apic: Use symbolic APIC_EOI_ACK
Use the symbol instead of hard-coded numbers, now that the reason for the value is documented where the constant is defined we don't need to duplicate this explanation in code. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/ecbe4c79d69c172378e47e5a587ff5cd10293c9f.1337184153.git.mst@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
4ebcc24390 | |
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 updates from Ingo Molnar. This touches some non-x86 files due to the sanitized INLINE_SPIN_UNLOCK config usage. Fixed up trivial conflicts due to just header include changes (removing headers due to cpu_idle() merge clashing with the <asm/system.h> split). * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/amd: Be more verbose about LVT offset assignments x86, tls: Off by one limit check x86/ioapic: Add io_apic_ops driver layer to allow interception x86/olpc: Add debugfs interface for EC commands x86: Merge the x86_32 and x86_64 cpu_idle() functions x86/kconfig: Remove CONFIG_TR=y from the defconfigs x86: Stop recursive fault in print_context_stack after stack overflow x86/io_apic: Move and reenable irq only when CONFIG_GENERIC_PENDING_IRQ=y x86/apic: Add separate apic_id_valid() functions for selected apic drivers locking/kconfig: Simplify INLINE_SPIN_UNLOCK usage x86/kconfig: Update defconfigs x86: Fix excessive MSR print out when show_msr is not specified |
6b8212a313 | |
Disintegrate asm/system.h for X86
Disintegrate asm/system.h for X86. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> cc: x86@kernel.org |
f05e798ad4 | |
x86/apic: Add separate apic_id_valid() functions for selected apic drivers
As suggested by Suresh Siddha and Yinghai Lu: For x2apic pre-enabled systems, apic driver is set already early through early_acpi_boot_init()/early_acpi_process_madt()/ acpi_parse_madt()/default_acpi_madt_oem_check() path so that apic_id_valid() checking will be sufficient during MADT and SRAT parsing. For non-x2apic pre-enabled systems, all apic ids should be less than 255. This allows us to substitute the checks in arch/x86/kernel/acpi/boot.c::acpi_parse_x2apic() and arch/x86/mm/srat.c::acpi_numa_x2apic_affinity_init() with apic->apic_id_valid(). In addition we can avoid feigning the x2apic cpu feature in the NumaChip apic code. The following apic drivers have separate apic_id_valid() functions which will accept x2apic type IDs : x2apic_phys x2apic_cluster x2apic_uv_x apic_numachip Signed-off-by: Steffen Persvold <sp@numascale.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Daniel J Blueman <daniel@numascale-asia.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/1331925935-13372-1-git-send-email-sp@numascale.com Signed-off-by: Ingo Molnar <mingo@kernel.org> |
b7157acf42 | |
x86/platform: Move APIC ID validity check into platform APIC code
Move APIC ID validity check into platform APIC code, so it can be overridden when needed. For NumaChip systems, always trust MADT, as it's constructed with high APIC IDs. Behaviour verifies on standard x86 systems and on NumaChip systems with this, and compile-tested with allyesconfig. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Reviewed-by: Steffen Persvold <sp@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1331709454-27966-1-git-send-email-daniel@numascale-asia.com Signed-off-by: Ingo Molnar <mingo@elte.hu> |
fa63030e9c | |
x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS
Currently "nox2apic" boot parameter was not enabling x2apic mode if the cpu, kernel are all capable of enabling x2apic mode and the OS handover happened in xapic mode. However If the bios enabled x2apic prior to OS handover, using "nox2apic" boot parameter had no effect. If the boot cpu's apicid is < 255, enable "nox2apic" boot parameter to disable the x2apic mode setup by the bios. This will enable the kernel to fallback to xapic mode and bringup only the cpu's which has apic-id < 255. -v2: fix patch error and two compiling warning make disable_x2apic to be __init Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/CAE9FiQUeB-3uxJAMiHsz=uPWoFv5Hg1pVepz7aU6YtqOxMC-=Q@mail.gmail.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> |
a31bc32760 |