mirror of
https://github.com/a52xq-dev/kernel.git
synced 2026-10-18 21:58:11 +07:00
| Message | SHA1 | |
|---|---|---|
misc: rtsx: Add short delay after exit from ASPM
commit 7a839dbab1be59f5ed3b3b046de29e166784c9b4 upstream. DMA transfers to and from the SD card stall for 10 seconds and run into timeout on RTS5260 card readers after ASPM was enabled. Adding a short msleep after disabling ASPM fixes the issue on several Dell Precision 7530/7540 systems I tested. This function is only called when waking up after the chip went into power-save after not transferring data for a few seconds. The added msleep does therefore not change anything in data transfer speed or induce any excessive waiting while data transfers are running, or the chip is sleeping. Only the transition from sleep to active is affected. Signed-off-by: Klaus Doth <kdlnx@doth.eu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/4434eaa7-2ee3-a560-faee-6cee63ebd6d4@doth.eu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
eabaf0d2d5 | |
misc: rtsx: set correct pcr_ops for rts522A
commit 10cea23b6aae15e8324f4101d785687f2c514fe5 upstream.
rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.
Fixes:
|
f61711d182 | |
mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
commit 4686392c32361c97e8434adf9cc77ad7991bfa81 upstream. The TX/RX register should not be treated the same way to allow for better support of tuning. Fix this by using a default initial value for TX. Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com [Ulf: Updated changelog] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
23929cbc88 | |
misc: rtsx: make several functions static
Several helper functions are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'rtsx_pm_power_saving' was not declared. Should it be static? symbol 'rtsx_set_l1off_sub_cfg_d0' was not declared. Should it be static? symbol 'rtsx_pm_full_on' was not declared. Should it be static? symbol 'rtsx_comm_set_ltr_latency' was not declared. Should it be static? symbol 'rtsx_pci_process_ocp' was not declared. Should it be static? symbol 'rtsx_pci_process_ocp_interrupt' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
ce7d8f8a66 | |
for-4.17/block-20180402
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RVhK
-----END PGP SIGNATURE-----
Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"It's a pretty quiet round this time, which is nice. This contains:
- series from Bart, cleaning up the way we set/test/clear atomic
queue flags.
- series from Bart, fixing races between gendisk and queue
registration and removal.
- set of bcache fixes and improvements from various folks, by way of
Michael Lyle.
- set of lightnvm updates from Matias, most of it being the 1.2 to
2.0 transition.
- removal of unused DIO flags from Nikolay.
- blk-mq/sbitmap memory ordering fixes from Omar.
- divide-by-zero fix for BFQ from Paolo.
- minor documentation patches from Randy.
- timeout fix from Tejun.
- Alpha "can't write a char atomically" fix from Mikulas.
- set of NVMe fixes by way of Keith.
- bsg and bsg-lib improvements from Christoph.
- a few sed-opal fixes from Jonas.
- cdrom check-disk-change deadlock fix from Maurizio.
- various little fixes, comment fixes, etc from various folks"
* tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits)
blk-mq: Directly schedule q->timeout_work when aborting a request
blktrace: fix comment in blktrace_api.h
lightnvm: remove function name in strings
lightnvm: pblk: remove some unnecessary NULL checks
lightnvm: pblk: don't recover unwritten lines
lightnvm: pblk: implement 2.0 support
lightnvm: pblk: implement get log report chunk
lightnvm: pblk: rename ppaf* to addrf*
lightnvm: pblk: check for supported version
lightnvm: implement get log report chunk helpers
lightnvm: make address conversions depend on generic device
lightnvm: add support for 2.0 address format
lightnvm: normalize geometry nomenclature
lightnvm: complete geo structure with maxoc*
lightnvm: add shorten OCSSD version in geo
lightnvm: add minor version to generic geometry
lightnvm: simplify geometry structure
lightnvm: pblk: refactor init/exit sequences
lightnvm: Avoid validation of default op value
lightnvm: centralize permission check for lightnvm ioctl
...
|
3526dd0c78 | |
misc: rtsx: make various functions static
The functions rts5260_get_ocpstat, rts5260_get_ocpstat2, rts5260_clear_ocpstat, rts5260_process_ocp, rts5260_init_hw and rts5260_set_aspm are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'rts5260_get_ocpstat' was not declared. Should it be static? symbol 'rts5260_get_ocpstat2' was not declared. Should it be static? symbol 'rts5260_clear_ocpstat' was not declared. Should it be static? symbol 'rts5260_process_ocp' was not declared. Should it be static? symbol 'rts5260_init_hw' was not declared. Should it be static? symbol 'rts5260_set_aspm' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
75a898051d | |
misc: rtsx: rename SG_END macro
A change to the generic scatterlist code caused a conflict with
the rtsx card reader driver:
In file included from drivers/misc/cardreader/rtsx_pcr.c:32:
include/linux/rtsx_pci.h:40: error: "SG_END" redefined [-Werror]
This changes one instance of the driver to prefix SG_END and
related constants.
Fixes:
|
f16ee7c7ec | |
- New Drivers
- Add support for RAVE Supervisory Processor
- (Re)moved drivers
- Move Realtek Card Reader Driver to Misc
- New Device Support
- Add support for Pinctrl to axp20x
- New Functionality
- Add resume support; atmel-flexcom
- Fix-ups
- Split MFD (mfd) and userspace handlers (platform); cros_ec
- Fix trivial (whitespace, spelling) issue(s); pcf50633-core
- Clean-up error handling; ab8500-debugfs
- General tidying up; tmio_core
- Kconfig fix-ups; qcom-pm8xxx
- Licensing changes (SPDX); stm32-lptimer, stm32-timers
- Device Tree fixups; mc13xxx
- Simplify/remove unused code; cros_ec_spi, axp20x, ti_am335x_tscadc,
kempld-core, intel_soc_pmic_core.c,
ab8500-debugfs
-----BEGIN PGP SIGNATURE-----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=k4Mk
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for RAVE Supervisory Processor
Moved drivers:
- Move Realtek Card Reader Driver to Misc
New Device Support:
- Add support for Pinctrl to axp20x
New Functionality:
- Add resume support to atmel-flexcom
Fix-ups:
- Split MFD (mfd) and userspace handlers (platform) in cros_ec
- Fix trivial (whitespace, spelling) issue(s) in pcf50633-core
- Clean-up error handling in ab8500-debugfs
- General tidying up in tmio_core
- Kconfig fix-ups for qcom-pm8xxx
- Licensing changes (SPDX) to stm32-lptimer, stm32-timers
- Device Tree fixups in mc13xxx
- Simplify/remove unused code in cros_ec_spi, axp20x, ti_am335x_tscadc,
kempld-core, intel_soc_pmic_core.c, ab8500-debugfs"
* tag 'mfd-next-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
mfd: lpc_ich: Do not touch SPI-NOR write protection bit on Apollo Lake
mfd: axp20x: Mark axp288 CHRG_BAK_CTRL register volatile
mfd: ab8500: Introduce DEFINE_SHOW_ATTRIBUTE() macro
atmel_flexcom: Support resuming after a chip reset
mfd: Remove duplicate includes
dt-bindings: mfd: mc13xxx: Add the unit address to sysled
mfd: stm32: Adopt SPDX identifier
mfd: axp20x: Add pinctrl cell for AXP813
mfd: pm8xxx: Make elegible for COMPILE_TEST
mfd: kempld-core: Use resource_size function on resource object
mfd: tmio: Move register macros to tmio_core.c
mfd: cros ec: spi: Simplify delay handling between SPI messages
mfd: palmas: Assign the right powerhold mask for tps65917
mfd: ab8500-debugfs: Use common error handling code in ab8500_print_modem_registers()
mfd: ti_am335x_tscadc: Remove redundant assignment to node
mfd: pcf50633: Fix spelling mistake: 'Falied' -> 'Failed'
dt-bindings: watchdog: Add bindings for RAVE SP watchdog driver
watchdog: Add RAVE SP watchdog driver
mfd: Add driver for RAVE Supervisory Processor
serdev: Introduce devm_serdev_device_open()
...
|
bc4e118355 | |
misc: rtsx: Fix symbol clashes
drivers/staging/rts5208/sd.o: In function `.sd_power_off_card3v3':
(.text+0x5760): multiple definition of `.sd_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.text+0x4630): first defined here
drivers/staging/rts5208/sd.o:(.opd+0x378): multiple definition of `sd_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.opd+0x4f8): first defined here
drivers/staging/rts5208/ms.o: In function `.ms_power_off_card3v3':
(.text+0x5e70): multiple definition of `.ms_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.text+0x46e0): first defined here
drivers/staging/rts5208/ms.o:(.opd+0x360): multiple definition of `ms_power_off_card3v3'
drivers/misc/cardreader/rtsx_pcr.o:(.opd+0x510): first defined here
Fixes:
|
51bd7125f7 | |
misc: rtsx: Add support for RTS5260
Add support for new chip rts5260. In order to support rts5260, the definitions of some internal registers and workflow have to be modified and are different from its predecessors and OCP function is added for RTS5260. So we need this patch to ensure RTS5260 can work. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Tested-by: Perry Yuan <perry_yuan@dell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
5da4e04ae4 | |
misc: rtsx: Move Realtek Card Reader Driver to misc
Because Realtek card reader drivers are pcie and usb drivers, and they bridge mmc subsystem and memstick subsystem, they are not mfd drivers. Greg and Lee Jones had a discussion about where to put the drivers, the result is that misc is a good place for them, so I move all files to misc. If I don't move them to a right place, I can't add any patch for this driver. Signed-off-by: Rui Feng <rui_feng@realsil.com.cn> Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Perry Yuan <perry_yuan@dell.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> |
e455b69ddf |