nhu/kernel_a52xq
Watch
1
Fork
You've already forked kernel_a52xq
 0
mirror of https://github.com/a52xq-dev/kernel.git synced 2026-10-18 21:58:11 +07:00
Code Issues Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

Browse source 
Conflicts:
	arch/sparc/mm/init_64.c

Conflict was simple non-overlapping additions.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2014-08-05 18:57:18 -07:00
commit e9011d0866
173 changed files with 1476 additions and 663 deletions
Download patch file Download diff file Expand all files Collapse all files

13
Documentation/input/event-codes.txt
View file

@ -281,6 +281,19 @@ gestures can normally be extracted from it.
If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
device.
INPUT_PROP_TOPBUTTONPAD:
-----------------------
Some laptops, most notably the Lenovo *40 series provide a trackstick
device but do not have physical buttons associated with the trackstick
device. Instead, the top area of the touchpad is marked to show
visual/haptic areas for left, middle, right buttons intended to be used
with the trackstick.
If INPUT_PROP_TOPBUTTONPAD is set, userspace should emulate buttons
accordingly. This property does not affect kernel behavior.
The kernel does not provide button emulation for such devices but treats
them as any other INPUT_PROP_BUTTONPAD device.
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.

16
MAINTAINERS
View file

@ -6956,6 +6956,12 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: drivers/pinctrl/pinctrl-at91.c
PIN CONTROLLER - RENESAS
M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
L: linux-sh@vger.kernel.org
S: Maintained
F: drivers/pinctrl/sh-pfc/
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <t.figa@samsung.com>
M: Thomas Abraham <thomas.abraham@linaro.org>
@ -8019,6 +8025,16 @@ F: drivers/ata/
F: include/linux/ata.h
F: include/linux/libata.h
SERIAL ATA AHCI PLATFORM devices support
M: Hans de Goede <hdegoede@redhat.com>
M: Tejun Heo <tj@kernel.org>
L: linux-ide@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
S: Supported
F: drivers/ata/ahci_platform.c
F: drivers/ata/libahci_platform.c
F: include/linux/ahci_platform.h
SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
L: linux-scsi@vger.kernel.org

4
Makefile
View file

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 16
SUBLEVEL = 0
EXTRAVERSION = -rc6
EXTRAVERSION = -rc7
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
@ -688,6 +688,8 @@ KBUILD_CFLAGS += -fomit-frame-pointer
endif
endif
KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments)
ifdef CONFIG_DEBUG_INFO
KBUILD_CFLAGS += -g
KBUILD_AFLAGS += -Wa,-gdwarf-2

10
arch/arm/crypto/aesbs-glue.c
View file

@ -137,7 +137,7 @@ static int aesbs_cbc_encrypt(struct blkcipher_desc *desc,
dst += AES_BLOCK_SIZE;
} while (--blocks);
}
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}
@ -158,7 +158,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
bsaes_cbc_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->dec, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
while (walk.nbytes) {
u32 blocks = walk.nbytes / AES_BLOCK_SIZE;
@ -182,7 +182,7 @@ static int aesbs_cbc_decrypt(struct blkcipher_desc *desc,
dst += AES_BLOCK_SIZE;
src += AES_BLOCK_SIZE;
} while (--blocks);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}
@ -268,7 +268,7 @@ static int aesbs_xts_encrypt(struct blkcipher_desc *desc,
bsaes_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->enc, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}
@ -292,7 +292,7 @@ static int aesbs_xts_decrypt(struct blkcipher_desc *desc,
bsaes_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
walk.nbytes, &ctx->dec, walk.iv);
kernel_neon_end();
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
return err;
}

12
arch/arm64/crypto/aes-glue.c
View file

@ -106,7 +106,7 @@ static int ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
aes_ecb_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_enc, rounds, blocks, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -128,7 +128,7 @@ static int ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
for (first = 1; (blocks = (walk.nbytes / AES_BLOCK_SIZE)); first = 0) {
aes_ecb_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_dec, rounds, blocks, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -151,7 +151,7 @@ static int cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_cbc_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_enc, rounds, blocks, walk.iv,
first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -174,7 +174,7 @@ static int cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_cbc_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key_dec, rounds, blocks, walk.iv,
first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
return err;
@ -243,7 +243,7 @@ static int xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_xts_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key1.key_enc, rounds, blocks,
(u8 *)ctx->key2.key_enc, walk.iv, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();
@ -267,7 +267,7 @@ static int xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
aes_xts_decrypt(walk.dst.virt.addr, walk.src.virt.addr,
(u8 *)ctx->key1.key_dec, rounds, blocks,
(u8 *)ctx->key2.key_enc, walk.iv, first);
err = blkcipher_walk_done(desc, &walk, 0);
err = blkcipher_walk_done(desc, &walk, walk.nbytes % AES_BLOCK_SIZE);
}
kernel_neon_end();

17
arch/arm64/mm/init.c
View file

@ -60,6 +60,17 @@ static int __init early_initrd(char *p)
early_param("initrd", early_initrd);
#endif
/*
* Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It
* currently assumes that for memory starting above 4G, 32-bit devices will
* use a DMA offset.
*/
static phys_addr_t max_zone_dma_phys(void)
{
phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32);
return min(offset + (1ULL << 32), memblock_end_of_DRAM());
}
static void __init zone_sizes_init(unsigned long min, unsigned long max)
{
struct memblock_region *reg;
@ -70,9 +81,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA)) {
unsigned long max_dma_phys =
(unsigned long)(dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1);
max_dma = max(min, min(max, max_dma_phys >> PAGE_SHIFT));
max_dma = PFN_DOWN(max_zone_dma_phys());
zone_size[ZONE_DMA] = max_dma - min;
}
zone_size[ZONE_NORMAL] = max - max_dma;
@ -146,7 +155,7 @@ void __init arm64_memblock_init(void)
/* 4GB maximum for 32-bit only capable devices */
if (IS_ENABLED(CONFIG_ZONE_DMA))
dma_phys_limit = dma_to_phys(NULL, DMA_BIT_MASK(32)) + 1;
dma_phys_limit = max_zone_dma_phys();
dma_contiguous_reserve(dma_phys_limit);
memblock_allow_resize();

2
arch/blackfin/configs/BF609-EZKIT_defconfig
View file

@ -102,7 +102,7 @@ CONFIG_I2C_CHARDEV=y
CONFIG_I2C_BLACKFIN_TWI=y
CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100
CONFIG_SPI=y
CONFIG_SPI_BFIN_V3=y
CONFIG_SPI_ADI_V3=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set

2
arch/blackfin/kernel/vmlinux.lds.S
View file

@ -145,7 +145,7 @@ SECTIONS
.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
#else
.init.data : AT(__data_lma + __data_len)
.init.data : AT(__data_lma + __data_len + 32)
{
__sinitdata = .;
INIT_DATA

1
arch/blackfin/mach-bf533/boards/blackstamp.c
View file

@ -20,6 +20,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>

1
arch/blackfin/mach-bf537/boards/cm_bf537e.c
View file

@ -21,6 +21,7 @@
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>

1
arch/blackfin/mach-bf537/boards/cm_bf537u.c
View file

@ -21,6 +21,7 @@
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>

1
arch/blackfin/mach-bf537/boards/tcm_bf537.c
View file

@ -21,6 +21,7 @@
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>

6
arch/blackfin/mach-bf548/boards/ezkit.c
View file

@ -2118,7 +2118,7 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.1", "pinctrl-adi2.0", NULL, "can1"),
PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", NULL, "ppi0_24b"),
PIN_MAP_MUX_GROUP_DEFAULT("bf54x-lq043", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-ac97.0", "pinctrl-adi2.0", NULL, "sport0"),
@ -2140,7 +2140,9 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("pata-bf54x", "pinctrl-adi2.0", NULL, "atapi_alter"),
#endif
PIN_MAP_MUX_GROUP_DEFAULT("bf5xx-nand.0", "pinctrl-adi2.0", NULL, "nfc0"),
PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", NULL, "keys_4x4"),
PIN_MAP_MUX_GROUP_DEFAULT("bf54x-keys", "pinctrl-adi2.0", "keys_4x4grp", "keys"),
PIN_MAP_MUX_GROUP("bf54x-keys", "4bit", "pinctrl-adi2.0", "keys_4x4grp", "keys"),
PIN_MAP_MUX_GROUP("bf54x-keys", "8bit", "pinctrl-adi2.0", "keys_8x8grp", "keys"),
};
static int __init ezkit_init(void)

1
arch/blackfin/mach-bf561/boards/acvilon.c
View file

@ -44,6 +44,7 @@
#include <linux/spi/flash.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/jiffies.h>
#include <linux/i2c-pca-platform.h>
#include <linux/delay.h>

1
arch/blackfin/mach-bf561/boards/cm_bf561.c
View file

@ -18,6 +18,7 @@
#endif
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>

1
arch/blackfin/mach-bf561/boards/ezkit.c
View file

@ -14,6 +14,7 @@
#include <linux/spi/spi.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>

20
arch/blackfin/mach-bf609/boards/ezkit.c
View file

@ -698,8 +698,6 @@ int bf609_nor_flash_init(struct platform_device *pdev)
{
#define CONFIG_SMC_GCTL_VAL 0x00000010
if (!devm_pinctrl_get_select_default(&pdev->dev))
return -EBUSY;
bfin_write32(SMC_GCTL, CONFIG_SMC_GCTL_VAL);
bfin_write32(SMC_B0CTL, 0x01002011);
bfin_write32(SMC_B0TIM, 0x08170977);
@ -709,7 +707,6 @@ int bf609_nor_flash_init(struct platform_device *pdev)
void bf609_nor_flash_exit(struct platform_device *pdev)
{
devm_pinctrl_put(pdev->dev.pins->p);
bfin_write32(SMC_GCTL, 0);
}
@ -2058,15 +2055,14 @@ static struct pinctrl_map __initdata bfin_pinmux_map[] = {
PIN_MAP_MUX_GROUP_DEFAULT("bfin-rotary", "pinctrl-adi2.0", NULL, "rotary"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_can.0", "pinctrl-adi2.0", NULL, "can0"),
PIN_MAP_MUX_GROUP_DEFAULT("physmap-flash.0", "pinctrl-adi2.0", NULL, "smc0"),
PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", NULL, "ppi2_16b"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
#if IS_ENABLED(CONFIG_VIDEO_MT9M114)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_8b"),
#elif IS_ENABLED(CONFIG_VIDEO_VS6624)
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_16b"),
#else
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", NULL, "ppi0_24b"),
#endif
PIN_MAP_MUX_GROUP_DEFAULT("bf609_nl8048.2", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
PIN_MAP_MUX_GROUP("bfin_display.0", "8bit", "pinctrl-adi2.0", "ppi2_8bgrp", "ppi2"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_display.0", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
PIN_MAP_MUX_GROUP("bfin_display.0", "16bit", "pinctrl-adi2.0", "ppi2_16bgrp", "ppi2"),
PIN_MAP_MUX_GROUP("bfin_capture.0", "8bit", "pinctrl-adi2.0", "ppi0_8bgrp", "ppi0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin_capture.0", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
PIN_MAP_MUX_GROUP("bfin_capture.0", "16bit", "pinctrl-adi2.0", "ppi0_16bgrp", "ppi0"),
PIN_MAP_MUX_GROUP("bfin_capture.0", "24bit", "pinctrl-adi2.0", "ppi0_24bgrp", "ppi0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-tdm.0", "pinctrl-adi2.0", NULL, "sport0"),
PIN_MAP_MUX_GROUP_DEFAULT("bfin-i2s.1", "pinctrl-adi2.0", NULL, "sport1"),

5
arch/blackfin/mach-bf609/include/mach/pm.h
View file

@ -10,6 +10,7 @@
#define __MACH_BF609_PM_H__
#include <linux/suspend.h>
#include <linux/platform_device.h>
extern int bfin609_pm_enter(suspend_state_t state);
extern int bf609_pm_prepare(void);
@ -19,6 +20,6 @@ void bf609_hibernate(void);
void bfin_sec_raise_irq(unsigned int sid);
void coreb_enable(void);
int bf609_nor_flash_init(void);
void bf609_nor_flash_exit(void);
int bf609_nor_flash_init(struct platform_device *pdev);
void bf609_nor_flash_exit(struct platform_device *pdev);
#endif

4
arch/blackfin/mach-bf609/pm.c
View file

@ -291,13 +291,13 @@ static struct bfin_cpu_pm_fns bf609_cpu_pm = {
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static int smc_pm_syscore_suspend(void)
{
bf609_nor_flash_exit();
bf609_nor_flash_exit(NULL);
return 0;
}
static void smc_pm_syscore_resume(void)
{
bf609_nor_flash_init();
bf609_nor_flash_init(NULL);
}
static struct syscore_ops smc_pm_syscore_ops = {

2
arch/blackfin/mach-common/ints-priority.c
View file

@ -1208,8 +1208,6 @@ int __init init_arch_irq(void)
bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority);
bfin_sec_set_priority(CONFIG_SEC_IRQ_PRIORITY_LEVELS, sec_int_priority);
/* Enable interrupts IVG7-15 */
bfin_irq_flags |= IMASK_IVG15 |
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |

Some files were not shown because too many files have changed in this diff Show more