powerpc updates for 4.18

Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing. -----BEGIN PGP SIGNATURE----- iQIwBAABCAAaBQJbGQKBExxtcGVAZWxsZXJtYW4uaWQuYXUACgkQUevqPMjhpYBq TRAAioK7rz5xYMkxaM3Ng3ybobEeNAwQqOolz98xvmnB9SfDWNuc99vf8cGu0/fQ zc8AKZ5RcnwipOjyGlxW9oa1ZhVq0xtYnQPiYLEKMdLQmh5D+C7+KpvAd1UElweg ub40/xDySWfMujfuMSF9JDCWPIXyojt4Xg5nJKIVRrAm/3YMe/+i5Am7NWHuMCEb aQmZtlYW5Mz81XY0968hjpUO6eKFRmsaM7yFAhGTXx6+oLRpGj1PZB4AwdRIKS2L Ak7q/VgxtE4W+s3a0GK2s+eXIhGKeFuX9AVnx3nti+8/K1OqrqhDcLMUC/9JpCpv EvOtO7dxPnZujHjdu4Eai/xNoo4h6zRy7bWqve9LoBM40CP5jljKzu1lwqqb5yO0 jC7/aXhgiSIxxcRJLjoI/TYpZPu40MifrkydmczykdPyPCnMIWEJDcj4KsRL/9Y8 9SSbJzRNC/SgQNTbUYPZFFi6G0QaMmlcbCb628k8QT+Gn3Xkdf/ZtxzqEyoF4Irq 46kFBsiSSK4Bu0rVlcUtJQLgdqytWULO6NKEYnD67laxYcgQd8pGFQ8SjZhRZLgU q5LA3HIWhoAI4M0wZhOnKXO6JfiQ1UbO8gUJLsWsfF0Fk5KAcdm+4kb4jbI1H4Qk Vol9WNRZwEllyaiqScZN9RuVVuH0GPOZeEH1dtWK+uWi0lM= =ZlBf -----END PGP SIGNATURE----- Merge tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Notable changes: - Support for split PMD page table lock on 64-bit Book3S (Power8/9). - Add support for HAVE_RELIABLE_STACKTRACE, so we properly support live patching again. - Add support for patching barrier_nospec in copy_from_user() and syscall entry. - A couple of fixes for our data breakpoints on Book3S. - A series from Nick optimising TLB/mm handling with the Radix MMU. - Numerous small cleanups to squash sparse/gcc warnings from Mathieu Malaterre. - Several series optimising various parts of the 32-bit code from Christophe Leroy. - Removal of support for two old machines, "SBC834xE" and "C2K" ("GEFanuc,C2K"), which is why the diffstat has so many deletions. And many other small improvements & fixes. There's a few out-of-area changes. Some minor ftrace changes OK'ed by Steve, and a fix to our powernv cpuidle driver. Then there's a series touching mm, x86 and fs/proc/task_mmu.c, which cleans up some details around pkey support. It was ack'ed/reviewed by Ingo & Dave and has been in next for several weeks. Thanks to: Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Al Viro, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Balbir Singh, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Dave Hansen, Fabio Estevam, Finn Thain, Frederic Barrat, Gautham R. Shenoy, Haren Myneni, Hari Bathini, Ingo Molnar, Jonathan Neuschäfer, Josh Poimboeuf, Kamalesh Babulal, Madhavan Srinivasan, Mahesh Salgaonkar, Mark Greer, Mathieu Malaterre, Matthew Wilcox, Michael Neuling, Michal Suchanek, Naveen N. Rao, Nicholas Piggin, Nicolai Stange, Olof Johansson, Paul Gortmaker, Paul Mackerras, Peter Rosin, Pridhiviraj Paidipeddi, Ram Pai, Rashmica Gupta, Ravi Bangoria, Russell Currey, Sam Bobroff, Samuel Mendoza-Jonas, Segher Boessenkool, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stewart Smith, Thiago Jung Bauermann, Torsten Duwe, Vaibhav Jain, Wei Yongjun, Wolfram Sang, Yisheng Xie, YueHaibing" * tag 'powerpc-4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (251 commits) powerpc/64s/radix: Fix missing ptesync in flush_cache_vmap cpuidle: powernv: Fix promotion from snooze if next state disabled powerpc: fix build failure by disabling attribute-alias warning in pci_32 ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait() powerpc-opal: fix spelling mistake "Uniterrupted" -> "Uninterrupted" powerpc: fix spelling mistake: "Usupported" -> "Unsupported" powerpc/pkeys: Detach execute_only key on !PROT_EXEC powerpc/powernv: copy/paste - Mask SO bit in CR powerpc: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove core support for Marvell mv64x60 hostbridges powerpc/boot: Remove support for Marvell mv64x60 i2c controller powerpc/boot: Remove support for Marvell MPSC serial controller powerpc/embedded6xx: Remove C2K board support powerpc/lib: optimise PPC32 memcmp powerpc/lib: optimise 32 bits __clear_user() powerpc/time: inline arch_vtime_task_switch() powerpc/Makefile: set -mcpu=860 flag for the 8xx powerpc: Implement csum_ipv6_magic in assembly powerpc/32: Optimise __csum_partial() powerpc/lib: Adjust .balign inside string functions for PPC32 ...
2026-10-18 21:58:11 +07:00 · 2018-06-07 10:23:33 -07:00 · 2018-06-07 10:23:33 -07:00 · c90fca951e
commit c90fca951e
parent c0ab85267e ff5bc793e4
298 changed files with 5696 additions and 6903 deletions
--- a/Documentation/ABI/testing/sysfs-class-cxl
+++ b/Documentation/ABI/testing/sysfs-class-cxl
@ -69,7 +69,9 @@ Date:           September 2014
 Contact:        linuxppc-dev@lists.ozlabs.org
 Description:    read/write
                Set the mode for prefaulting in segments into the segment table
-                when performing the START_WORK ioctl. Possible values:
+                when performing the START_WORK ioctl. Only applicable when
+                running under hashed page table mmu.
+                Possible values:
                        none: No prefaulting (default)
                        work_element_descriptor: Treat the work element
                                 descriptor as an effective address and
--- a/Documentation/accelerators/ocxl.rst
+++ b/Documentation/accelerators/ocxl.rst
@ -157,6 +157,17 @@ OCXL_IOCTL_GET_METADATA:
  Obtains configuration information from the card, such at the size of
  MMIO areas, the AFU version, and the PASID for the current context.

+OCXL_IOCTL_ENABLE_P9_WAIT:
+
+  Allows the AFU to wake a userspace thread executing 'wait'. Returns
+  information to userspace to allow it to configure the AFU. Note that
+  this is only available on POWER9.
+
+OCXL_IOCTL_GET_FEATURES:
+
+  Reports on which CPU features that affect OpenCAPI are usable from
+  userspace.
+

 mmap
 ----
--- a/Documentation/devicetree/bindings/marvell.txt
+++ b/Documentation/devicetree/bindings/marvell.txt
@ -1,516 +0,0 @@
-Marvell Discovery mv64[345]6x System Controller chips
-===========================================================
-
-The Marvell mv64[345]60 series of system controller chips contain
-many of the peripherals needed to implement a complete computer
-system.  In this section, we define device tree nodes to describe
-the system controller chip itself and each of the peripherals
-which it contains.  Compatible string values for each node are
-prefixed with the string "marvell,", for Marvell Technology Group Ltd.
-
-1) The /system-controller node
-
-  This node is used to represent the system-controller and must be
-  present when the system uses a system controller chip. The top-level
-  system-controller node contains information that is global to all
-  devices within the system controller chip. The node name begins
-  with "system-controller" followed by the unit address, which is
-  the base address of the memory-mapped register set for the system
-  controller chip.
-
-  Required properties:
-
-    - ranges : Describes the translation of system controller addresses
-      for memory mapped registers.
-    - clock-frequency: Contains the main clock frequency for the system
-      controller chip.
-    - reg : This property defines the address and size of the
-      memory-mapped registers contained within the system controller
-      chip.  The address specified in the "reg" property should match
-      the unit address of the system-controller node.
-    - #address-cells : Address representation for system controller
-      devices.  This field represents the number of cells needed to
-      represent the address of the memory-mapped registers of devices
-      within the system controller chip.
-    - #size-cells : Size representation for the memory-mapped
-      registers within the system controller chip.
-    - #interrupt-cells : Defines the width of cells used to represent
-      interrupts.
-
-  Optional properties:
-
-    - model : The specific model of the system controller chip.  Such
-      as, "mv64360", "mv64460", or "mv64560".
-    - compatible : A string identifying the compatibility identifiers
-      of the system controller chip.
-
-  The system-controller node contains child nodes for each system
-  controller device that the platform uses.  Nodes should not be created
-  for devices which exist on the system controller chip but are not used
-
-  Example Marvell Discovery mv64360 system-controller node:
-
-    system-controller@f1000000 { /* Marvell Discovery mv64360 */
-	    #address-cells = <1>;
-	    #size-cells = <1>;
-	    model = "mv64360";                      /* Default */
-	    compatible = "marvell,mv64360";
-	    clock-frequency = <133333333>;
-	    reg = <0xf1000000 0x10000>;
-	    virtual-reg = <0xf1000000>;
-	    ranges = <0x88000000 0x88000000 0x1000000 /* PCI 0 I/O Space */
-		    0x80000000 0x80000000 0x8000000 /* PCI 0 MEM Space */
-		    0xa0000000 0xa0000000 0x4000000 /* User FLASH */
-		    0x00000000 0xf1000000 0x0010000 /* Bridge's regs */
-		    0xf2000000 0xf2000000 0x0040000>;/* Integrated SRAM */
-
-	    [ child node definitions... ]
-    }
-
-2) Child nodes of /system-controller
-
-   a) Marvell Discovery MDIO bus
-
-   The MDIO is a bus to which the PHY devices are connected.  For each
-   device that exists on this bus, a child node should be created.  See
-   the definition of the PHY node below for an example of how to define
-   a PHY.
-
-   Required properties:
-     - #address-cells : Should be <1>
-     - #size-cells : Should be <0>
-     - compatible : Should be "marvell,mv64360-mdio"
-
-   Example:
-
-     mdio {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     compatible = "marvell,mv64360-mdio";
-
-	     ethernet-phy@0 {
-		     ......
-	     };
-     };
-
-
-   b) Marvell Discovery ethernet controller
-
-   The Discover ethernet controller is described with two levels
-   of nodes.  The first level describes an ethernet silicon block
-   and the second level describes up to 3 ethernet nodes within
-   that block.  The reason for the multiple levels is that the
-   registers for the node are interleaved within a single set
-   of registers.  The "ethernet-block" level describes the
-   shared register set, and the "ethernet" nodes describe ethernet
-   port-specific properties.
-
-   Ethernet block node
-
-   Required properties:
-     - #address-cells : <1>
-     - #size-cells : <0>
-     - compatible : "marvell,mv64360-eth-block"
-     - reg : Offset and length of the register set for this block
-
-   Optional properties:
-     - clocks : Phandle to the clock control device and gate bit
-
-   Example Discovery Ethernet block node:
-     ethernet-block@2000 {
-	     #address-cells = <1>;
-	     #size-cells = <0>;
-	     compatible = "marvell,mv64360-eth-block";
-	     reg = <0x2000 0x2000>;
-	     ethernet@0 {
-		     .......
-	     };
-     };
-
-   Ethernet port node
-
-   Required properties:
-     - compatible : Should be "marvell,mv64360-eth".
-     - reg : Should be <0>, <1>, or <2>, according to which registers
-       within the silicon block the device uses.
-     - interrupts : <a> where a is the interrupt number for the port.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-     - phy : the phandle for the PHY connected to this ethernet
-       controller.
-     - local-mac-address : 6 bytes, MAC address
-
-   Example Discovery Ethernet port node:
-     ethernet@0 {
-	     compatible = "marvell,mv64360-eth";
-	     reg = <0>;
-	     interrupts = <32>;
-	     interrupt-parent = <&PIC>;
-	     phy = <&PHY0>;
-	     local-mac-address = [ 00 00 00 00 00 00 ];
-     };
-
-
-
-   c) Marvell Discovery PHY nodes
-
-   Required properties:
-     - interrupts : <a> where a is the interrupt number for this phy.
-     - interrupt-parent : the phandle for the interrupt controller that
-       services interrupts for this device.
-     - reg : The ID number for the phy, usually a small integer
-
-   Example Discovery PHY node:
-     ethernet-phy@1 {
-	     compatible = "broadcom,bcm5421";
-	     interrupts = <76>;      /* GPP 12 */
-	     interrupt-parent = <&PIC>;
-	     reg = <1>;
-     };
-
-
-   d) Marvell Discovery SDMA nodes
-
-   Represent DMA hardware associated with the MPSC (multiprotocol
-   serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-sdma"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the DMA
-       device.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SDMA node:
-     sdma@4000 {
-	     compatible = "marvell,mv64360-sdma";
-	     reg = <0x4000 0xc18>;
-	     virtual-reg = <0xf1004000>;
-	     interrupts = <36>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   e) Marvell Discovery BRG nodes
-
-   Represent baud rate generator hardware associated with the MPSC
-   (multiprotocol serial controllers).
-
-   Required properties:
-     - compatible : "marvell,mv64360-brg"
-     - reg : Offset and length of the register set for this device
-     - clock-src : A value from 0 to 15 which selects the clock
-       source for the baud rate generator.  This value corresponds
-       to the CLKS value in the BRGx configuration register.  See
-       the mv64x60 User's Manual.
-     - clock-frequence : The frequency (in Hz) of the baud rate
-       generator's input clock.
-     - current-speed : The current speed setting (presumably by
-       firmware) of the baud rate generator.
-
-   Example Discovery BRG node:
-     brg@b200 {
-	     compatible = "marvell,mv64360-brg";
-	     reg = <0xb200 0x8>;
-	     clock-src = <8>;
-	     clock-frequency = <133333333>;
-	     current-speed = <9600>;
-     };
-
-
-   f) Marvell Discovery CUNIT nodes
-
-   Represent the Serial Communications Unit device hardware.
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     cunit@f200 {
-	     reg = <0xf200 0x200>;
-     };
-
-
-   g) Marvell Discovery MPSCROUTING nodes
-
-   Represent the Discovery's MPSC routing hardware
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery CUNIT node:
-     mpscrouting@b500 {
-	     reg = <0xb400 0xc>;
-     };
-
-
-   h) Marvell Discovery MPSCINTR nodes
-
-   Represent the Discovery's MPSC DMA interrupt hardware registers
-   (SDMA cause and mask registers).
-
-   Required properties:
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPSCINTR node:
-     mpsintr@b800 {
-	     reg = <0xb800 0x100>;
-     };
-
-
-   i) Marvell Discovery MPSC nodes
-
-   Represent the Discovery's MPSC (Multiprotocol Serial Controller)
-   serial port.
-
-   Required properties:
-     - compatible : "marvell,mv64360-mpsc"
-     - reg : Offset and length of the register set for this device
-     - sdma : the phandle for the SDMA node used by this port
-     - brg : the phandle for the BRG node used by this port
-     - cunit : the phandle for the CUNIT node used by this port
-     - mpscrouting : the phandle for the MPSCROUTING node used by this port
-     - mpscintr : the phandle for the MPSCINTR node used by this port
-     - cell-index : the hardware index of this cell in the MPSC core
-     - max_idle : value needed for MPSC CHR3 (Maximum Frame Length)
-       register
-     - interrupts : <a> where a is the interrupt number for the MPSC.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery MPSCINTR node:
-     mpsc@8000 {
-	     compatible = "marvell,mv64360-mpsc";
-	     reg = <0x8000 0x38>;
-	     virtual-reg = <0xf1008000>;
-	     sdma = <&SDMA0>;
-	     brg = <&BRG0>;
-	     cunit = <&CUNIT>;
-	     mpscrouting = <&MPSCROUTING>;
-	     mpscintr = <&MPSCINTR>;
-	     cell-index = <0>;
-	     max_idle = <40>;
-	     interrupts = <40>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   j) Marvell Discovery Watch Dog Timer nodes
-
-   Represent the Discovery's watchdog timer hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-wdt"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery Watch Dog Timer node:
-     wdt@b410 {
-	     compatible = "marvell,mv64360-wdt";
-	     reg = <0xb410 0x8>;
-     };
-
-
-   k) Marvell Discovery I2C nodes
-
-   Represent the Discovery's I2C hardware
-
-   Required properties:
-     - device_type : "i2c"
-     - compatible : "marvell,mv64360-i2c"
-     - reg : Offset and length of the register set for this device
-     - interrupts : <a> where a is the interrupt number for the I2C.
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery I2C node:
-	     compatible = "marvell,mv64360-i2c";
-	     reg = <0xc000 0x20>;
-	     virtual-reg = <0xf100c000>;
-	     interrupts = <37>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   l) Marvell Discovery PIC (Programmable Interrupt Controller) nodes
-
-   Represent the Discovery's PIC hardware
-
-   Required properties:
-     - #interrupt-cells : <1>
-     - #address-cells : <0>
-     - compatible : "marvell,mv64360-pic"
-     - reg : Offset and length of the register set for this device
-     - interrupt-controller
-
-   Example Discovery PIC node:
-     pic {
-	     #interrupt-cells = <1>;
-	     #address-cells = <0>;
-	     compatible = "marvell,mv64360-pic";
-	     reg = <0x0 0x88>;
-	     interrupt-controller;
-     };
-
-
-   m) Marvell Discovery MPP (Multipurpose Pins) multiplexing nodes
-
-   Represent the Discovery's MPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-mpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery MPP node:
-     mpp@f000 {
-	     compatible = "marvell,mv64360-mpp";
-	     reg = <0xf000 0x10>;
-     };
-
-
-   n) Marvell Discovery GPP (General Purpose Pins) nodes
-
-   Represent the Discovery's GPP hardware
-
-   Required properties:
-     - compatible : "marvell,mv64360-gpp"
-     - reg : Offset and length of the register set for this device
-
-   Example Discovery GPP node:
-     gpp@f000 {
-	     compatible = "marvell,mv64360-gpp";
-	     reg = <0xf100 0x20>;
-     };
-
-
-   o) Marvell Discovery PCI host bridge node
-
-   Represents the Discovery's PCI host bridge device.  The properties
-   for this node conform to Rev 2.1 of the PCI Bus Binding to IEEE
-   1275-1994.  A typical value for the compatible property is
-   "marvell,mv64360-pci".
-
-   Example Discovery PCI host bridge node
-     pci@80000000 {
-	     #address-cells = <3>;
-	     #size-cells = <2>;
-	     #interrupt-cells = <1>;
-	     device_type = "pci";
-	     compatible = "marvell,mv64360-pci";
-	     reg = <0xcf8 0x8>;
-	     ranges = <0x01000000 0x0        0x0
-			     0x88000000 0x0 0x01000000
-		       0x02000000 0x0 0x80000000
-			     0x80000000 0x0 0x08000000>;
-	     bus-range = <0 255>;
-	     clock-frequency = <66000000>;
-	     interrupt-parent = <&PIC>;
-	     interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-	     interrupt-map = <
-		     /* IDSEL 0x0a */
-		     0x5000 0 0 1 &PIC 80
-		     0x5000 0 0 2 &PIC 81
-		     0x5000 0 0 3 &PIC 91
-		     0x5000 0 0 4 &PIC 93
-
-		     /* IDSEL 0x0b */
-		     0x5800 0 0 1 &PIC 91
-		     0x5800 0 0 2 &PIC 93
-		     0x5800 0 0 3 &PIC 80
-		     0x5800 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0c */
-		     0x6000 0 0 1 &PIC 91
-		     0x6000 0 0 2 &PIC 93
-		     0x6000 0 0 3 &PIC 80
-		     0x6000 0 0 4 &PIC 81
-
-		     /* IDSEL 0x0d */
-		     0x6800 0 0 1 &PIC 93
-		     0x6800 0 0 2 &PIC 80
-		     0x6800 0 0 3 &PIC 81
-		     0x6800 0 0 4 &PIC 91
-	     >;
-     };
-
-
-   p) Marvell Discovery CPU Error nodes
-
-   Represent the Discovery's CPU error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-cpu-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery CPU Error node:
-     cpu-error@70 {
-	     compatible = "marvell,mv64360-cpu-error";
-	     reg = <0x70 0x10 0x128 0x28>;
-	     interrupts = <3>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   q) Marvell Discovery SRAM Controller nodes
-
-   Represent the Discovery's SRAM controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-sram-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery SRAM Controller node:
-     sram-ctrl@380 {
-	     compatible = "marvell,mv64360-sram-ctrl";
-	     reg = <0x380 0x80>;
-	     interrupts = <13>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   r) Marvell Discovery PCI Error Handler nodes
-
-   Represent the Discovery's PCI error handler device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-pci-error"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery PCI Error Handler node:
-     pci-error@1d40 {
-	     compatible = "marvell,mv64360-pci-error";
-	     reg = <0x1d40 0x40 0xc28 0x4>;
-	     interrupts = <12>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
-   s) Marvell Discovery Memory Controller nodes
-
-   Represent the Discovery's memory controller device.
-
-   Required properties:
-     - compatible : "marvell,mv64360-mem-ctrl"
-     - reg : Offset and length of the register set for this device
-     - interrupts : the interrupt number for this device
-     - interrupt-parent : the phandle for the interrupt controller
-       that services interrupts for this device.
-
-   Example Discovery Memory Controller node:
-     mem-ctrl@1400 {
-	     compatible = "marvell,mv64360-mem-ctrl";
-	     reg = <0x1400 0x60>;
-	     interrupts = <17>;
-	     interrupt-parent = <&PIC>;
-     };
-
-
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@ -156,6 +156,7 @@ config PPC
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select DCACHE_WORD_ACCESS		if PPC64 && CPU_LITTLE_ENDIAN
+	select DYNAMIC_FTRACE			if FUNCTION_TRACER
 	select EDAC_ATOMIC_SCRUB
 	select EDAC_SUPPORT
 	select GENERIC_ATOMIC64			if PPC32
@ -214,6 +215,7 @@ config PPC
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_RCU_TABLE_FREE		if SMP
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RELIABLE_STACKTRACE		if PPC64 && CPU_LITTLE_ENDIAN
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select HAVE_IRQ_TIME_ACCOUNTING
@ -228,6 +230,7 @@ config PPC
 	select OF_RESERVED_MEM
 	select OLD_SIGACTION			if PPC32
 	select OLD_SIGSUSPEND
+	select RTC_LIB
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS			if !PPC64
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@ -17,17 +17,18 @@ HAS_BIARCH	:= $(call cc-option-yn, -m32)
 # Set default 32 bits cross compilers for vdso and boot wrapper
 CROSS32_COMPILE ?=

-CROSS32CC		:= $(CROSS32_COMPILE)gcc
-CROSS32AR		:= $(CROSS32_COMPILE)ar
-
 ifeq ($(HAS_BIARCH),y)
 ifeq ($(CROSS32_COMPILE),)
-CROSS32CC	:= $(CC) -m32
-KBUILD_ARFLAGS	+= --target=elf32-powerpc
+ifdef CONFIG_PPC32
+# These options will be overridden by any -mcpu option that the CPU
+# or platform code sets later on the command line, but they are needed
+# to set a sane 32-bit cpu target for the 64-bit cross compiler which
+# may default to the wrong ISA.
+KBUILD_CFLAGS		+= -mcpu=powerpc
+KBUILD_AFLAGS		+= -mcpu=powerpc
+endif
 endif
 endif
-
-export CROSS32CC CROSS32AR

 ifeq ($(CROSS_COMPILE),)
 KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
@ -74,13 +75,15 @@ endif
 endif

 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
-override LD	+= -EL
+KBUILD_CFLAGS	+= -mlittle-endian
+LDFLAGS		+= -EL
 LDEMULATION	:= lppc
 GNUTARGET	:= powerpcle
 MULTIPLEWORD	:= -mno-multiple
 KBUILD_CFLAGS_MODULE += $(call cc-option,-mno-save-toc-indirect)
 else
-override LD	+= -EB
+KBUILD_CFLAGS += $(call cc-option,-mbig-endian)
+LDFLAGS		+= -EB
 LDEMULATION	:= ppc
 GNUTARGET	:= powerpc
 MULTIPLEWORD	:= -mmultiple
@ -93,19 +96,19 @@ aflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mabi=elfv1)
 aflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mabi=elfv2
 endif

-cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mlittle-endian
-cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mbig-endian)
 ifneq ($(cc-name),clang)
  cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mno-strict-align
 endif

+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mbig-endian)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mlittle-endian
 aflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(call cc-option,-mbig-endian)
 aflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -mlittle-endian

 ifeq ($(HAS_BIARCH),y)
-override AS	+= -a$(BITS)
-override LD	+= -m elf$(BITS)$(LDEMULATION)
-override CC	+= -m$(BITS)
+KBUILD_CFLAGS	+= -m$(BITS)
+KBUILD_AFLAGS	+= -m$(BITS) -Wl,-a$(BITS)
+LDFLAGS		+= -m elf$(BITS)$(LDEMULATION)
 KBUILD_ARFLAGS	+= --target=elf$(BITS)-$(GNUTARGET)
 endif

@ -178,6 +181,7 @@ CFLAGS-$(CONFIG_POWER6_CPU) += $(call cc-option,-mcpu=power6)
 CFLAGS-$(CONFIG_POWER7_CPU) += $(call cc-option,-mcpu=power7)
 CFLAGS-$(CONFIG_POWER8_CPU) += $(call cc-option,-mcpu=power8)
 CFLAGS-$(CONFIG_POWER9_CPU) += $(call cc-option,-mcpu=power9)
+CFLAGS-$(CONFIG_PPC_8xx) += $(call cc-option,-mcpu=860)

 # Altivec option not allowed with e500mc64 in GCC.
 ifeq ($(CONFIG_ALTIVEC),y)
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@ -23,19 +23,23 @@ all: $(obj)/zImage
 compress-$(CONFIG_KERNEL_GZIP) := CONFIG_KERNEL_GZIP
 compress-$(CONFIG_KERNEL_XZ)   := CONFIG_KERNEL_XZ

+ifdef CROSS32_COMPILE
+    BOOTCC := $(CROSS32_COMPILE)gcc
+    BOOTAR := $(CROSS32_COMPILE)ar
+else
+    BOOTCC := $(CC)
+    BOOTAR := $(AR)
+endif
+
 BOOTCFLAGS    := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		 -fno-strict-aliasing -Os -msoft-float -pipe \
 		 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \
 		 -D$(compress-y)

-BOOTCC := $(CC)
 ifdef CONFIG_PPC64_BOOT_WRAPPER
 BOOTCFLAGS	+= -m64
 else
 BOOTCFLAGS	+= -m32
-ifdef CROSS32_COMPILE
-    BOOTCC := $(CROSS32_COMPILE)gcc
-endif
 endif

 BOOTCFLAGS	+= -isystem $(shell $(BOOTCC) -print-file-name=include)
@ -49,6 +53,8 @@ endif

 BOOTAFLAGS	:= -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc

+BOOTARFLAGS	:= -cr$(KBUILD_ARFLAGS)
+
 ifdef CONFIG_DEBUG_INFO
 BOOTCFLAGS	+= -g
 endif
@ -120,7 +126,7 @@ src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
 src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
 src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c
 src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mpsc.c mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c
 src-wlib-$(CONFIG_XILINX_VIRTEX) += uartlite.c
 src-wlib-$(CONFIG_CPM) += cpm-serial.c

@ -143,8 +149,8 @@ src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c
 src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c
 src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
 src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
-					cuboot-c2k.c gamecube-head.S \
-					gamecube.c wii-head.S wii.c holly.c \
+					gamecube-head.S gamecube.c \
+					wii-head.S wii.c holly.c \
 					fixed-head.S mvme5100.c
 src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
 src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
@ -202,7 +208,7 @@ quiet_cmd_bootas = BOOTAS  $@
      cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $<

 quiet_cmd_bootar = BOOTAR  $@
-      cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+      cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@

 $(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
 	$(call if_changed_dep,bootcc)
@ -339,7 +345,6 @@ image-$(CONFIG_MVME7100)                += dtbImage.mvme7100
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
-image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 image-$(CONFIG_GAMECUBE)		+= dtbImage.gamecube
 image-$(CONFIG_WII)			+= dtbImage.wii
 image-$(CONFIG_MVME5100)		+= dtbImage.mvme5100
--- a/arch/powerpc/boot/cuboot-c2k.c
+++ b/arch/powerpc/boot/cuboot-c2k.c
@ -1,189 +0,0 @@
-/*
- * GEFanuc C2K platform code.
- *
- * Author: Remi Machet <rmachet@slac.stanford.edu>
- *
- * Originated from prpmc2800.c
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "types.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "elf.h"
-#include "mv64x60.h"
-#include "cuboot.h"
-#include "ppcboot.h"
-
-static u8 *bridge_base;
-
-static void c2k_bridge_setup(u32 mem_size)
-{
-	u32 i, v[30], enables, acc_bits;
-	u32 pci_base_hi, pci_base_lo, size, buf[2];
-	unsigned long cpu_base;
-	int rc;
-	void *devp, *mv64x60_devp;
-	u8 *bridge_pbase, is_coherent;
-	struct mv64x60_cpu2pci_win *tbl;
-	int bus;
-
-	bridge_pbase = mv64x60_get_bridge_pbase();
-	is_coherent = mv64x60_is_coherent();
-
-	if (is_coherent)
-		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
-			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
-			| MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
-			| MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-	else
-		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
-			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
-			| MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
-			| MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-	mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
-	mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
-	if (mv64x60_devp == NULL)
-		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
-
-	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
-	enables |= 0x007ffe00; /* Disable all cpu->pci windows */
-	out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
-
-	/* Get the cpu -> pci i/o & mem mappings from the device tree */
-	devp = NULL;
-	for (bus = 0; ; bus++) {
-		char name[] = "pci ";
-
-		name[strlen(name)-1] = bus+'0';
-
-		devp = find_node_by_alias(name);
-		if (devp == NULL)
-			break;
-
-		if (bus >= 2)
-			fatal("Error: Only 2 PCI controllers are supported at" \
-				" this time.\n");
-
-		mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus, 0,
-				mem_size, acc_bits);
-
-		rc = getprop(devp, "ranges", v, sizeof(v));
-		if (rc == 0)
-			fatal("Error: Can't find marvell,mv64360-pci ranges"
-				" property\n\r");
-
-		/* Get the cpu -> pci i/o & mem mappings from the device tree */
-
-		for (i = 0; i < rc; i += 6) {
-			switch (v[i] & 0xff000000) {
-			case 0x01000000: /* PCI I/O Space */
-				tbl = mv64x60_cpu2pci_io;
-				break;
-			case 0x02000000: /* PCI MEM Space */
-				tbl = mv64x60_cpu2pci_mem;
-				break;
-			default:
-				continue;
-			}
-
-			pci_base_hi = v[i+1];
-			pci_base_lo = v[i+2];
-			cpu_base = v[i+3];
-			size = v[i+5];
-
-			buf[0] = cpu_base;
-			buf[1] = size;
-
-			if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
-				fatal("Error: Can't translate PCI address " \
-						"0x%x\n\r", (u32)cpu_base);
-
-			mv64x60_config_cpu2pci_window(bridge_base, bus,
-				pci_base_hi, pci_base_lo, cpu_base, size, tbl);
-		}
-
-		enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
-						cpu->pci<bus> mem0 */
-		out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
-			enables);
-	};
-}
-
-static void c2k_fixups(void)
-{
-	u32 mem_size;
-
-	mem_size = mv64x60_get_mem_size(bridge_base);
-	c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
-}
-
-#define MV64x60_MPP_CNTL_0	0xf000
-#define MV64x60_MPP_CNTL_2	0xf008
-#define MV64x60_GPP_IO_CNTL	0xf100
-#define MV64x60_GPP_LEVEL_CNTL	0xf110
-#define MV64x60_GPP_VALUE_SET	0xf118
-
-static void c2k_reset(void)
-{
-	u32 temp;
-
-	udelay(5000000);
-
-	if (bridge_base != 0) {
-		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
-		temp &= 0xFFFF0FFF;
-		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
-		temp |= 0x00000004;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
-		temp |= 0x00000004;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
-		temp &= 0xFFFF0FFF;
-		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
-		temp |= 0x00080000;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
-
-		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
-		temp |= 0x00080000;
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
-
-		out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
-				0x00080004);
-	}
-
-	for (;;);
-}
-
-static bd_t bd;
-
-void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			unsigned long r6, unsigned long r7)
-{
-	CUBOOT_INIT();
-
-	fdt_init(_dtb_start);
-
-	bridge_base = mv64x60_get_bridge_base();
-
-	platform_ops.fixups = c2k_fixups;
-	platform_ops.exit = c2k_reset;
-
-	if (serial_console_init() < 0)
-		exit();
-}
--- a/arch/powerpc/boot/dts/c2k.dts
+++ b/arch/powerpc/boot/dts/c2k.dts
@ -1,366 +0,0 @@
-/* Device Tree Source for GEFanuc C2K
- *
- * Author: Remi Machet <rmachet@slac.stanford.edu>
- *
- * Originated from prpmc2800.dts
- *
- * 2008 (c) Stanford University
- * 2007 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	model = "C2K";
-	compatible = "GEFanuc,C2K";
-	coherency-off;
-
-	aliases {
-		pci0 = &PCI0;
-		pci1 = &PCI1;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "PowerPC,7447";
-			reg = <0>;
-			clock-frequency = <996000000>;	/* 996 MHz */
-			bus-frequency = <166666667>;	/* 166.6666 MHz */
-			timebase-frequency = <41666667>;	/* 166.6666/4 MHz */
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <32768>;
-			d-cache-size = <32768>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;	/* 1GB */
-	};
-
-	system-controller@d8000000 { /* Marvell Discovery */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		model = "mv64460";
-		compatible = "marvell,mv64360";
-		clock-frequency = <166666667>;		/* 166.66... MHz */
-		reg = <0xd8000000 0x00010000>;
-		virtual-reg = <0xd8000000>;
-		ranges = <0xd4000000 0xd4000000 0x01000000	/* PCI 0 I/O Space */
-			  0x80000000 0x80000000 0x08000000	/* PCI 0 MEM Space */
-			  0xd0000000 0xd0000000 0x01000000	/* PCI 1 I/O Space */
-			  0xa0000000 0xa0000000 0x08000000	/* PCI 1 MEM Space */
-			  0xd8100000 0xd8100000 0x00010000	/* FPGA */
-			  0xd8110000 0xd8110000 0x00010000	/* FPGA USARTs */
-			  0xf8000000 0xf8000000 0x08000000	/* User FLASH */
-			  0x00000000 0xd8000000 0x00010000	/* Bridge's regs */
-			  0xd8140000 0xd8140000 0x00040000>;	/* Integrated SRAM */
-
-		mdio@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-mdio";
-			reg = <0x2000 4>;
-			PHY0: ethernet-phy@0 {
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <0>;
-			};
-			PHY1: ethernet-phy@1 {
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <1>;
-			};
-			PHY2: ethernet-phy@2 {
-				interrupts = <76>;	/* GPP 12 */
-				interrupt-parent = <&PIC>;
-				reg = <2>;
-			};
-		};
-
-		ethernet-group@2000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "marvell,mv64360-eth-group";
-			reg = <0x2000 0x2000>;
-			ethernet@0 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <0>;
-				interrupts = <32>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY0>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-			ethernet@1 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <1>;
-				interrupts = <33>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-			ethernet@2 {
-				device_type = "network";
-				compatible = "marvell,mv64360-eth";
-				reg = <2>;
-				interrupts = <34>;
-				interrupt-parent = <&PIC>;
-				phy = <&PHY2>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-			};
-		};
-
-		SDMA0: sdma@4000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x4000 0xc18>;
-			virtual-reg = <0xd8004000>;
-			interrupt-base = <0>;
-			interrupts = <36>;
-			interrupt-parent = <&PIC>;
-		};
-
-		SDMA1: sdma@6000 {
-			compatible = "marvell,mv64360-sdma";
-			reg = <0x6000 0xc18>;
-			virtual-reg = <0xd8006000>;
-			interrupt-base = <0>;
-			interrupts = <38>;
-			interrupt-parent = <&PIC>;
-		};
-
-		BRG0: brg@b200 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb200 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <115200>;
-		};
-
-		BRG1: brg@b208 {
-			compatible = "marvell,mv64360-brg";
-			reg = <0xb208 0x8>;
-			clock-src = <8>;
-			clock-frequency = <133333333>;
-			current-speed = <115200>;
-		};
-
-		CUNIT: cunit@f200 {
-			reg = <0xf200 0x200>;
-		};
-
-		MPSCROUTING: mpscrouting@b400 {
-			reg = <0xb400 0xc>;
-		};
-
-		MPSCINTR: mpscintr@b800 {
-			reg = <0xb800 0x100>;
-			virtual-reg = <0xd800b800>;
-		};
-
-		MPSC0: mpsc@8000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x8000 0x38>;
-			virtual-reg = <0xd8008000>;
-			sdma = <&SDMA0>;
-			brg = <&BRG0>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <0>;
-			interrupts = <40>;
-			interrupt-parent = <&PIC>;
-		};
-
-		MPSC1: mpsc@9000 {
-			compatible = "marvell,mv64360-mpsc";
-			reg = <0x9000 0x38>;
-			virtual-reg = <0xd8009000>;
-			sdma = <&SDMA1>;
-			brg = <&BRG1>;
-			cunit = <&CUNIT>;
-			mpscrouting = <&MPSCROUTING>;
-			mpscintr = <&MPSCINTR>;
-			cell-index = <1>;
-			interrupts = <42>;
-			interrupt-parent = <&PIC>;
-		};
-
-		wdt@b410 {			/* watchdog timer */
-			compatible = "marvell,mv64360-wdt";
-			reg = <0xb410 0x8>;
-		};
-
-		i2c@c000 {
-			compatible = "marvell,mv64360-i2c";
-			reg = <0xc000 0x20>;
-			virtual-reg = <0xd800c000>;
-			interrupts = <37>;
-			interrupt-parent = <&PIC>;
-		};
-
-		PIC: pic {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			compatible = "marvell,mv64360-pic";
-			reg = <0x0000 0x88>;
-			interrupt-controller;
-		};
-
-		mpp@f000 {
-			compatible = "marvell,mv64360-mpp";
-			reg = <0xf000 0x10>;
-		};
-
-		gpp@f100 {
-			compatible = "marvell,mv64360-gpp";
-			reg = <0xf100 0x20>;
-		};
-
-		PCI0: pci@80000000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "marvell,mv64360-pci";
-			reg = <0x0cf8 0x8>;
-			ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
-				  0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
-			bus-range = <0 255>;
-			clock-frequency = <66000000>;
-			interrupt-pci-iack = <0x0c34>;
-			interrupt-parent = <&PIC>;
-			interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
-			interrupt-map = <
-				/* Only one interrupt line for PMC0 slot (INTA) */
-				0x0000 0 0 1 &PIC 88
-			>;
-		};
-
-
-		PCI1: pci@a0000000 {
-			#address-cells = <3>;
-			#size-cells = <2>;
-			#interrupt-cells = <1>;
-			device_type = "pci";
-			compatible = "marvell,mv64360-pci";
-			reg = <0x0c78 0x8>;
-			ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
-				  0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
-			bus-range = <0 255>;
-			clock-frequency = <66000000>;
-			interrupt-pci-iack = <0x0cb4>;
-			interrupt-parent = <&PIC>;
-			interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
-			interrupt-map = <
-				/* IDSEL 0x01: PMC1 ? */
-				0x0800 0 0 1 &PIC 88
-				/* IDSEL 0x02: cPCI bridge */
-				0x1000 0 0 1 &PIC 88
-				/* IDSEL 0x03: USB controller */
-				0x1800 0 0 1 &PIC 91
-				/* IDSEL 0x04: SATA controller */
-				0x2000 0 0 1 &PIC 95
-			>;
-		};
-
-		cpu-error@70 {
-			compatible = "marvell,mv64360-cpu-error";
-			reg = <0x0070 0x10 0x0128 0x28>;
-			interrupts = <3>;
-			interrupt-parent = <&PIC>;
-		};
-
-		sram-ctrl@380 {
-			compatible = "marvell,mv64360-sram-ctrl";
-			reg = <0x0380 0x80>;
-			interrupts = <13>;
-			interrupt-parent = <&PIC>;
-		};
-
-		pci-error@1d40 {
-			compatible = "marvell,mv64360-pci-error";
-			reg = <0x1d40 0x40 0x0c28 0x4>;
-			interrupts = <12>;
-			interrupt-parent = <&PIC>;
-		};
-
-		pci-error@1dc0 {
-			compatible = "marvell,mv64360-pci-error";
-			reg = <0x1dc0 0x40 0x0ca8 0x4>;
-			interrupts = <16>;
-			interrupt-parent = <&PIC>;
-		};
-
-		mem-ctrl@1400 {
-			compatible = "marvell,mv64360-mem-ctrl";
-			reg = <0x1400 0x60>;
-			interrupts = <17>;
-			interrupt-parent = <&PIC>;
-		};
-		/* Devices attached to the device controller */
-		devicebus@45c {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "marvell,mv64306-devctrl";
-			reg = <0x45C 0x88>;
-			interrupts = <1>;
-			interrupt-parent = <&PIC>;
-			ranges = 	<0 0 0xd8100000 0x10000
-					 2 0 0xd8110000 0x10000
-					 4 0 0xf8000000 0x8000000>;
-			fpga@0,0 {
-				compatible = "sbs,fpga-c2k";
-				reg = <0 0 0x10000>;
-			};
-			fpga_usart@2,0 {
-				compatible = "sbs,fpga_usart-c2k";
-				reg = <2 0 0x10000>;
-			};
-			nor_flash@4,0 {
-				compatible = "cfi-flash";
-				reg = <4 0 0x8000000>; /* 128MB */
-				bank-width = <4>;
-				device-width = <1>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				partition@0 {
-					label = "boot";
-					reg = <0x00000000 0x00080000>;
-				};
-				partition@40000 {
-					label = "kernel";
-					reg = <0x00080000 0x00400000>;
-				};
-				partition@440000 {
-					label = "initrd";
-					reg = <0x00480000 0x00B80000>;
-				};
-				partition@1000000 {
-					label = "rootfs";
-					reg = <0x01000000 0x06800000>;
-				};
-				partition@7800000 {
-					label = "recovery";
-					reg = <0x07800000 0x00800000>;
-					read-only;
-				};
-			};
-		};
-	};
-	chosen {
-		stdout-path = &MPSC0;
-	};
-};
--- a/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t104xqds.dtsi
@ -269,7 +269,7 @@

 		i2c@118000 {
 			pca9547@77 {
-				compatible = "philips,pca9547";
+				compatible = "nxp,pca9547";
 				reg = <0x77>;
 			};
 			rtc@68 {
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@ -1,331 +0,0 @@
-/*
- * SBC8349E Device Tree Source
- *
- * Copyright 2007 Wind River Inc.
- *
- * Paul Gortmaker (see MAINTAINERS for contact information)
- *
- *	-based largely on the Freescale MPC834x_MDS dts.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-
-/ {
-	model = "SBC8349E";
-	compatible = "SBC834xE";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8349@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x10000000>;	// 256MB at 0
-	};
-
-	soc8349@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		ranges = <0x0 0xe0000000 0x00100000>;
-		reg = <0xe0000000 0x00000200>;
-		bus-frequency = <0>;
-
-		wdt@200 {
-			compatible = "mpc83xx_wdt";
-			reg = <0x200 0x100>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		i2c@3100 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <1>;
-			compatible = "fsl-i2c";
-			reg = <0x3100 0x100>;
-			interrupts = <15 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-		};
-
-		spi@7000 {
-			cell-index = <0>;
-			compatible = "fsl,spi";
-			reg = <0x7000 0x1000>;
-			interrupts = <16 0x8>;
-			interrupt-parent = <&ipic>;
-			mode = "cpu";
-		};
-
-		dma@82a8 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-			reg = <0x82a8 4>;
-			ranges = <0 0x8100 0x1a8>;
-			interrupt-parent = <&ipic>;
-			interrupts = <71 8>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
-				reg = <0x180 0x28>;
-				cell-index = <3>;
-				interrupt-parent = <&ipic>;
-				interrupts = <71 8>;
-			};
-		};
-
-		/* phy type (ULPI or SERIAL) are only types supported for MPH */
-		/* port = 0 or 1 */
-		usb@22000 {
-			compatible = "fsl-usb2-mph";
-			reg = <0x22000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupt-parent = <&ipic>;
-			interrupts = <39 0x8>;
-			phy_type = "ulpi";
-			port0;
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <32 0x8 33 0x8 34 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-			linux,network-index = <0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@19 {
-					interrupt-parent = <&ipic>;
-					interrupts = <20 0x8>;
-					reg = <0x19>;
-				};
-
-				phy1: ethernet-phy@1a {
-					interrupt-parent = <&ipic>;
-					interrupts = <21 0x8>;
-					reg = <0x1a>;
-				};
-
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 0x8 36 0x8 37 0x8>;
-			interrupt-parent = <&ipic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-			linux,network-index = <1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>;
-			clock-frequency = <0>;
-			interrupts = <9 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;
-			clock-frequency = <0>;
-			interrupts = <10 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		crypto@30000 {
-			compatible = "fsl,sec2.0";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			fsl,num-channels = <4>;
-			fsl,channel-fifo-len = <24>;
-			fsl,exec-units-mask = <0x7e>;
-			fsl,descriptor-types-mask = <0x01010ebf>;
-		};
-
-		/* IPIC
-		 * interrupts cell = <intr #, sense>
-		 * sense values match linux IORESOURCE_IRQ_* defines:
-		 * sense == 8: Level, low assertion
-		 * sense == 2: Edge, high-to-low change
-		 */
-		ipic: pic@700 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x700 0x100>;
-			device_type = "ipic";
-		};
-	};
-
-	localbus@e0005000 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc8349-localbus", "simple-bus";
-		reg = <0xe0005000 0x1000>;
-		interrupts = <77 0x8>;
-		interrupt-parent = <&ipic>;
-		ranges = <0x0 0x0 0xff800000 0x00800000		/* 8MB Flash */
-			  0x1 0x0 0xf8000000 0x00002000		/* 8KB EEPROM */
-			  0x2 0x0 0x10000000 0x04000000		/* 64MB SDRAM */
-			  0x3 0x0 0x10000000 0x04000000>;	/* 64MB SDRAM */
-
-		flash@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "intel,28F640J3A", "cfi-flash";
-			reg = <0x0 0x0 0x800000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				label = "u-boot";
-				reg = <0x00000000 0x00040000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "user";
-				reg = <0x00040000 0x006c0000>;
-			};
-
-			partition@700000 {
-				label = "legacy u-boot";
-				reg = <0x00700000 0x00100000>;
-				read-only;
-			};
-
-		};
-	};
-
-	pci0: pci@e0008500 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x11 */
-				 0x8800 0x0 0x0 0x1 &ipic 48 0x8
-				 0x8800 0x0 0x0 0x2 &ipic 17 0x8
-				 0x8800 0x0 0x0 0x3 &ipic 18 0x8
-				 0x8800 0x0 0x0 0x4 &ipic 19 0x8>;
-
-		interrupt-parent = <&ipic>;
-		interrupts = <0x42 0x8>;
-		bus-range = <0 0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100		/* internal registers */
-		       0xe0008300 0x8>;		/* config space access registers */
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
-	};
-};
--- a/arch/powerpc/boot/mpc8xx.c
+++ b/arch/powerpc/boot/mpc8xx.c
@ -24,7 +24,7 @@ u32 mpc885_get_clock(u32 crystal)
 {
 	u32 *immr;
 	u32 plprcr;
-	int mfi, mfn, mfd, pdf, div;
+	int mfi, mfn, mfd, pdf;
 	u32 ret;

 	immr = fsl_get_immr();
@ -43,7 +43,6 @@ u32 mpc885_get_clock(u32 crystal)
 	}

 	pdf = (plprcr >> 1) & 0xf;
-	div = (plprcr >> 20) & 3;
 	mfd = (plprcr >> 22) & 0x1f;
 	mfn = (plprcr >> 27) & 0x1f;

--- a/arch/powerpc/boot/mpsc.c
+++ b/arch/powerpc/boot/mpsc.c
@ -1,169 +0,0 @@
-/*
- * MPSC/UART driver for the Marvell mv64360, mv64460, ...
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-
-
-#define MPSC_CHR_1		0x000c
-
-#define MPSC_CHR_2		0x0010
-#define MPSC_CHR_2_TA		(1<<7)
-#define MPSC_CHR_2_TCS		(1<<9)
-#define MPSC_CHR_2_RA		(1<<23)
-#define MPSC_CHR_2_CRD		(1<<25)
-#define MPSC_CHR_2_EH		(1<<31)
-
-#define MPSC_CHR_4		0x0018
-#define MPSC_CHR_4_Z		(1<<29)
-
-#define MPSC_CHR_5		0x001c
-#define MPSC_CHR_5_CTL1_INTR	(1<<12)
-#define MPSC_CHR_5_CTL1_VALID	(1<<15)
-
-#define MPSC_CHR_10		0x0030
-
-#define MPSC_INTR_CAUSE		0x0000
-#define MPSC_INTR_CAUSE_RCC	(1<<6)
-#define MPSC_INTR_MASK		0x0080
-
-#define SDMA_SDCM		0x0008
-#define SDMA_SDCM_AR		(1<<15)
-#define SDMA_SDCM_AT		(1<<31)
-
-static volatile char *mpsc_base;
-static volatile char *mpscintr_base;
-static u32 chr1, chr2;
-
-static int mpsc_open(void)
-{
-	chr1 = in_le32((u32 *)(mpsc_base + MPSC_CHR_1)) & 0x00ff0000;
-	chr2 = in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & ~(MPSC_CHR_2_TA
-			| MPSC_CHR_2_TCS | MPSC_CHR_2_RA | MPSC_CHR_2_CRD
-			| MPSC_CHR_2_EH);
-	out_le32((u32 *)(mpsc_base + MPSC_CHR_4), MPSC_CHR_4_Z);
-	out_le32((u32 *)(mpsc_base + MPSC_CHR_5),
-			MPSC_CHR_5_CTL1_INTR | MPSC_CHR_5_CTL1_VALID);
-	out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_EH);
-	return 0;
-}
-
-static void mpsc_putc(unsigned char c)
-{
-	while (in_le32((u32 *)(mpsc_base + MPSC_CHR_2)) & MPSC_CHR_2_TCS);
-
-	out_le32((u32 *)(mpsc_base + MPSC_CHR_1), chr1 | c);
-	out_le32((u32 *)(mpsc_base + MPSC_CHR_2), chr2 | MPSC_CHR_2_TCS);
-}
-
-static unsigned char mpsc_getc(void)
-{
-	u32 cause = 0;
-	unsigned char c;
-
-	while (!(cause & MPSC_INTR_CAUSE_RCC))
-		cause = in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE));
-
-	c = in_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2));
-	out_8((u8 *)(mpsc_base + MPSC_CHR_10 + 2), c);
-	out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE),
-			cause & ~MPSC_INTR_CAUSE_RCC);
-
-	return c;
-}
-
-static u8 mpsc_tstc(void)
-{
-	return (u8)((in_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE))
-				& MPSC_INTR_CAUSE_RCC) != 0);
-}
-
-static void mpsc_stop_dma(volatile char *sdma_base)
-{
-	out_le32((u32 *)(mpsc_base + MPSC_CHR_2),MPSC_CHR_2_TA | MPSC_CHR_2_RA);
-	out_le32((u32 *)(sdma_base + SDMA_SDCM), SDMA_SDCM_AR | SDMA_SDCM_AT);
-
-	while ((in_le32((u32 *)(sdma_base + SDMA_SDCM))
-				& (SDMA_SDCM_AR | SDMA_SDCM_AT)) != 0)
-		udelay(100);
-}
-
-static volatile char *mpsc_get_virtreg_of_phandle(void *devp, char *prop)
-{
-	void *v;
-	int n;
-
-	n = getprop(devp, prop, &v, sizeof(v));
-	if (n != sizeof(v))
-		goto err_out;
-
-	devp = find_node_by_linuxphandle((u32)v);
-	if (devp == NULL)
-		goto err_out;
-
-	n = getprop(devp, "virtual-reg", &v, sizeof(v));
-	if (n == sizeof(v))
-		return v;
-
-err_out:
-	return NULL;
-}
-
-int mpsc_console_init(void *devp, struct serial_console_data *scdp)
-{
-	void *v;
-	int n, reg_set;
-	volatile char *sdma_base;
-
-	n = getprop(devp, "virtual-reg", &v, sizeof(v));
-	if (n != sizeof(v))
-		goto err_out;
-	mpsc_base = v;
-
-	sdma_base = mpsc_get_virtreg_of_phandle(devp, "sdma");
-	if (sdma_base == NULL)
-		goto err_out;
-
-	mpscintr_base = mpsc_get_virtreg_of_phandle(devp, "mpscintr");
-	if (mpscintr_base == NULL)
-		goto err_out;
-
-	n = getprop(devp, "cell-index", &v, sizeof(v));
-	if (n != sizeof(v))
-		goto err_out;
-	reg_set = (int)v;
-
-	mpscintr_base += (reg_set == 0) ? 0x4 : 0xc;
-
-	/* Make sure the mpsc ctlrs are shutdown */
-	out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0);
-	out_le32((u32 *)(mpscintr_base + MPSC_INTR_CAUSE), 0);
-	out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0);
-	out_le32((u32 *)(mpscintr_base + MPSC_INTR_MASK), 0);
-
-	mpsc_stop_dma(sdma_base);
-
-	scdp->open = mpsc_open;
-	scdp->putc = mpsc_putc;
-	scdp->getc = mpsc_getc;
-	scdp->tstc = mpsc_tstc;
-	scdp->close = NULL;
-
-	return 0;
-
-err_out:
-	return -1;
-}
--- a/arch/powerpc/boot/mv64x60.c
+++ b/arch/powerpc/boot/mv64x60.c
@ -1,581 +0,0 @@
-/*
- * Marvell hostbridge routines
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2004, 2005, 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "elf.h"
-#include "page.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "mv64x60.h"
-
-#define PCI_DEVFN(slot,func)	((((slot) & 0x1f) << 3) | ((func) & 0x07))
-
-#define MV64x60_CPU2MEM_WINDOWS			4
-#define MV64x60_CPU2MEM_0_BASE			0x0008
-#define MV64x60_CPU2MEM_0_SIZE			0x0010
-#define MV64x60_CPU2MEM_1_BASE			0x0208
-#define MV64x60_CPU2MEM_1_SIZE			0x0210
-#define MV64x60_CPU2MEM_2_BASE			0x0018
-#define MV64x60_CPU2MEM_2_SIZE			0x0020
-#define MV64x60_CPU2MEM_3_BASE			0x0218
-#define MV64x60_CPU2MEM_3_SIZE			0x0220
-
-#define MV64x60_ENET2MEM_BAR_ENABLE		0x2290
-#define MV64x60_ENET2MEM_0_BASE			0x2200
-#define MV64x60_ENET2MEM_0_SIZE			0x2204
-#define MV64x60_ENET2MEM_1_BASE			0x2208
-#define MV64x60_ENET2MEM_1_SIZE			0x220c
-#define MV64x60_ENET2MEM_2_BASE			0x2210
-#define MV64x60_ENET2MEM_2_SIZE			0x2214
-#define MV64x60_ENET2MEM_3_BASE			0x2218
-#define MV64x60_ENET2MEM_3_SIZE			0x221c
-#define MV64x60_ENET2MEM_4_BASE			0x2220
-#define MV64x60_ENET2MEM_4_SIZE			0x2224
-#define MV64x60_ENET2MEM_5_BASE			0x2228
-#define MV64x60_ENET2MEM_5_SIZE			0x222c
-#define MV64x60_ENET2MEM_ACC_PROT_0		0x2294
-#define MV64x60_ENET2MEM_ACC_PROT_1		0x2298
-#define MV64x60_ENET2MEM_ACC_PROT_2		0x229c
-
-#define MV64x60_MPSC2MEM_BAR_ENABLE		0xf250
-#define MV64x60_MPSC2MEM_0_BASE			0xf200
-#define MV64x60_MPSC2MEM_0_SIZE			0xf204
-#define MV64x60_MPSC2MEM_1_BASE			0xf208
-#define MV64x60_MPSC2MEM_1_SIZE			0xf20c
-#define MV64x60_MPSC2MEM_2_BASE			0xf210
-#define MV64x60_MPSC2MEM_2_SIZE			0xf214
-#define MV64x60_MPSC2MEM_3_BASE			0xf218
-#define MV64x60_MPSC2MEM_3_SIZE			0xf21c
-#define MV64x60_MPSC_0_REMAP			0xf240
-#define MV64x60_MPSC_1_REMAP			0xf244
-#define MV64x60_MPSC2MEM_ACC_PROT_0		0xf254
-#define MV64x60_MPSC2MEM_ACC_PROT_1		0xf258
-#define MV64x60_MPSC2REGS_BASE			0xf25c
-
-#define MV64x60_IDMA2MEM_BAR_ENABLE		0x0a80
-#define MV64x60_IDMA2MEM_0_BASE			0x0a00
-#define MV64x60_IDMA2MEM_0_SIZE			0x0a04
-#define MV64x60_IDMA2MEM_1_BASE			0x0a08
-#define MV64x60_IDMA2MEM_1_SIZE			0x0a0c
-#define MV64x60_IDMA2MEM_2_BASE			0x0a10
-#define MV64x60_IDMA2MEM_2_SIZE			0x0a14
-#define MV64x60_IDMA2MEM_3_BASE			0x0a18
-#define MV64x60_IDMA2MEM_3_SIZE			0x0a1c
-#define MV64x60_IDMA2MEM_4_BASE			0x0a20
-#define MV64x60_IDMA2MEM_4_SIZE			0x0a24
-#define MV64x60_IDMA2MEM_5_BASE			0x0a28
-#define MV64x60_IDMA2MEM_5_SIZE			0x0a2c
-#define MV64x60_IDMA2MEM_6_BASE			0x0a30
-#define MV64x60_IDMA2MEM_6_SIZE			0x0a34
-#define MV64x60_IDMA2MEM_7_BASE			0x0a38
-#define MV64x60_IDMA2MEM_7_SIZE			0x0a3c
-#define MV64x60_IDMA2MEM_ACC_PROT_0		0x0a70
-#define MV64x60_IDMA2MEM_ACC_PROT_1		0x0a74
-#define MV64x60_IDMA2MEM_ACC_PROT_2		0x0a78
-#define MV64x60_IDMA2MEM_ACC_PROT_3		0x0a7c
-
-#define MV64x60_PCI_ACC_CNTL_WINDOWS		6
-#define MV64x60_PCI0_PCI_DECODE_CNTL		0x0d3c
-#define MV64x60_PCI1_PCI_DECODE_CNTL		0x0dbc
-
-#define MV64x60_PCI0_BAR_ENABLE			0x0c3c
-#define MV64x60_PCI02MEM_0_SIZE			0x0c08
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_LO		0x1e00
-#define MV64x60_PCI0_ACC_CNTL_0_BASE_HI		0x1e04
-#define MV64x60_PCI0_ACC_CNTL_0_SIZE		0x1e08
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_LO		0x1e10
-#define MV64x60_PCI0_ACC_CNTL_1_BASE_HI		0x1e14
-#define MV64x60_PCI0_ACC_CNTL_1_SIZE		0x1e18
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_LO		0x1e20
-#define MV64x60_PCI0_ACC_CNTL_2_BASE_HI		0x1e24
-#define MV64x60_PCI0_ACC_CNTL_2_SIZE		0x1e28
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_LO		0x1e30
-#define MV64x60_PCI0_ACC_CNTL_3_BASE_HI		0x1e34
-#define MV64x60_PCI0_ACC_CNTL_3_SIZE		0x1e38
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_LO		0x1e40
-#define MV64x60_PCI0_ACC_CNTL_4_BASE_HI		0x1e44
-#define MV64x60_PCI0_ACC_CNTL_4_SIZE		0x1e48
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_LO		0x1e50
-#define MV64x60_PCI0_ACC_CNTL_5_BASE_HI		0x1e54
-#define MV64x60_PCI0_ACC_CNTL_5_SIZE		0x1e58
-
-#define MV64x60_PCI1_BAR_ENABLE			0x0cbc
-#define MV64x60_PCI12MEM_0_SIZE			0x0c88
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_LO		0x1e80
-#define MV64x60_PCI1_ACC_CNTL_0_BASE_HI		0x1e84
-#define MV64x60_PCI1_ACC_CNTL_0_SIZE		0x1e88
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_LO		0x1e90
-#define MV64x60_PCI1_ACC_CNTL_1_BASE_HI		0x1e94
-#define MV64x60_PCI1_ACC_CNTL_1_SIZE		0x1e98
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_LO		0x1ea0
-#define MV64x60_PCI1_ACC_CNTL_2_BASE_HI		0x1ea4
-#define MV64x60_PCI1_ACC_CNTL_2_SIZE		0x1ea8
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_LO		0x1eb0
-#define MV64x60_PCI1_ACC_CNTL_3_BASE_HI		0x1eb4
-#define MV64x60_PCI1_ACC_CNTL_3_SIZE		0x1eb8
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_LO		0x1ec0
-#define MV64x60_PCI1_ACC_CNTL_4_BASE_HI		0x1ec4
-#define MV64x60_PCI1_ACC_CNTL_4_SIZE		0x1ec8
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_LO		0x1ed0
-#define MV64x60_PCI1_ACC_CNTL_5_BASE_HI		0x1ed4
-#define MV64x60_PCI1_ACC_CNTL_5_SIZE		0x1ed8
-
-#define MV64x60_CPU2PCI_SWAP_NONE		0x01000000
-
-#define MV64x60_CPU2PCI0_IO_BASE		0x0048
-#define MV64x60_CPU2PCI0_IO_SIZE		0x0050
-#define MV64x60_CPU2PCI0_IO_REMAP		0x00f0
-#define MV64x60_CPU2PCI0_MEM_0_BASE		0x0058
-#define MV64x60_CPU2PCI0_MEM_0_SIZE		0x0060
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_LO		0x00f8
-#define MV64x60_CPU2PCI0_MEM_0_REMAP_HI		0x0320
-
-#define MV64x60_CPU2PCI1_IO_BASE		0x0090
-#define MV64x60_CPU2PCI1_IO_SIZE		0x0098
-#define MV64x60_CPU2PCI1_IO_REMAP		0x0108
-#define MV64x60_CPU2PCI1_MEM_0_BASE		0x00a0
-#define MV64x60_CPU2PCI1_MEM_0_SIZE		0x00a8
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_LO		0x0110
-#define MV64x60_CPU2PCI1_MEM_0_REMAP_HI		0x0340
-
-struct mv64x60_mem_win {
-	u32 hi;
-	u32 lo;
-	u32 size;
-};
-
-struct mv64x60_pci_win {
-	u32 fcn;
-	u32 hi;
-	u32 lo;
-	u32 size;
-};
-
-/* PCI config access routines */
-struct {
-	u32 addr;
-	u32 data;
-} static mv64x60_pci_cfgio[2] = {
-	{ /* hose 0 */
-		.addr	= 0xcf8,
-		.data	= 0xcfc,
-	},
-	{ /* hose 1 */
-		.addr	= 0xc78,
-		.data	= 0xc7c,
-	}
-};
-
-u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset)
-{
-	out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr),
-			(1 << 31) | (bus << 16) | (devfn << 8) | offset);
-	return in_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data));
-}
-
-void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn, u8 offset,
-		u32 val)
-{
-	out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].addr),
-			(1 << 31) | (bus << 16) | (devfn << 8) | offset);
-	out_le32((u32 *)(bridge_base + mv64x60_pci_cfgio[hose].data), val);
-}
-
-/* I/O ctlr -> system memory setup */
-static struct mv64x60_mem_win mv64x60_cpu2mem[MV64x60_CPU2MEM_WINDOWS] = {
-	{
-		.lo	= MV64x60_CPU2MEM_0_BASE,
-		.size	= MV64x60_CPU2MEM_0_SIZE,
-	},
-	{
-		.lo	= MV64x60_CPU2MEM_1_BASE,
-		.size	= MV64x60_CPU2MEM_1_SIZE,
-	},
-	{
-		.lo	= MV64x60_CPU2MEM_2_BASE,
-		.size	= MV64x60_CPU2MEM_2_SIZE,
-	},
-	{
-		.lo	= MV64x60_CPU2MEM_3_BASE,
-		.size	= MV64x60_CPU2MEM_3_SIZE,
-	},
-};
-
-static struct mv64x60_mem_win mv64x60_enet2mem[MV64x60_CPU2MEM_WINDOWS] = {
-	{
-		.lo	= MV64x60_ENET2MEM_0_BASE,
-		.size	= MV64x60_ENET2MEM_0_SIZE,
-	},
-	{
-		.lo	= MV64x60_ENET2MEM_1_BASE,
-		.size	= MV64x60_ENET2MEM_1_SIZE,
-	},
-	{
-		.lo	= MV64x60_ENET2MEM_2_BASE,
-		.size	= MV64x60_ENET2MEM_2_SIZE,
-	},
-	{
-		.lo	= MV64x60_ENET2MEM_3_BASE,
-		.size	= MV64x60_ENET2MEM_3_SIZE,
-	},
-};
-
-static struct mv64x60_mem_win mv64x60_mpsc2mem[MV64x60_CPU2MEM_WINDOWS] = {
-	{
-		.lo	= MV64x60_MPSC2MEM_0_BASE,
-		.size	= MV64x60_MPSC2MEM_0_SIZE,
-	},
-	{
-		.lo	= MV64x60_MPSC2MEM_1_BASE,
-		.size	= MV64x60_MPSC2MEM_1_SIZE,
-	},
-	{
-		.lo	= MV64x60_MPSC2MEM_2_BASE,
-		.size	= MV64x60_MPSC2MEM_2_SIZE,
-	},
-	{
-		.lo	= MV64x60_MPSC2MEM_3_BASE,
-		.size	= MV64x60_MPSC2MEM_3_SIZE,
-	},
-};
-
-static struct mv64x60_mem_win mv64x60_idma2mem[MV64x60_CPU2MEM_WINDOWS] = {
-	{
-		.lo	= MV64x60_IDMA2MEM_0_BASE,
-		.size	= MV64x60_IDMA2MEM_0_SIZE,
-	},
-	{
-		.lo	= MV64x60_IDMA2MEM_1_BASE,
-		.size	= MV64x60_IDMA2MEM_1_SIZE,
-	},
-	{
-		.lo	= MV64x60_IDMA2MEM_2_BASE,
-		.size	= MV64x60_IDMA2MEM_2_SIZE,
-	},
-	{
-		.lo	= MV64x60_IDMA2MEM_3_BASE,
-		.size	= MV64x60_IDMA2MEM_3_SIZE,
-	},
-};
-
-static u32 mv64x60_dram_selects[MV64x60_CPU2MEM_WINDOWS] = {0xe,0xd,0xb,0x7};
-
-/*
- * ENET, MPSC, and IDMA ctlrs on the MV64x60 have separate windows that
- * must be set up so that the respective ctlr can access system memory.
- * Configure them to be same as cpu->memory windows.
- */
-void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase,
-		u8 is_coherent)
-{
-	u32 i, base, size, enables, prot = 0, snoop_bits = 0;
-
-	/* Disable ctlr->mem windows */
-	out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0x3f);
-	out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), 0xf);
-	out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), 0xff);
-
-	if (is_coherent)
-		snoop_bits = 0x2 << 12; /* Writeback */
-
-	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		if (enables & (1 << i)) /* Set means disabled */
-			continue;
-
-		base = in_le32((u32 *)(bridge_base + mv64x60_cpu2mem[i].lo))
-			<< 16;
-		base |= snoop_bits | (mv64x60_dram_selects[i] << 8);
-		size = in_le32((u32 *)(bridge_base + mv64x60_cpu2mem[i].size))
-			<< 16;
-		prot |= (0x3 << (i << 1)); /* RW access */
-
-		out_le32((u32 *)(bridge_base + mv64x60_enet2mem[i].lo), base);
-		out_le32((u32 *)(bridge_base + mv64x60_enet2mem[i].size), size);
-		out_le32((u32 *)(bridge_base + mv64x60_mpsc2mem[i].lo), base);
-		out_le32((u32 *)(bridge_base + mv64x60_mpsc2mem[i].size), size);
-		out_le32((u32 *)(bridge_base + mv64x60_idma2mem[i].lo), base);
-		out_le32((u32 *)(bridge_base + mv64x60_idma2mem[i].size), size);
-	}
-
-	out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_0), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_1), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_ACC_PROT_2), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_ACC_PROT_0), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_ACC_PROT_1), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_0), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_1), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_2), prot);
-	out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_ACC_PROT_3), prot);
-
-	/* Set mpsc->bridge's reg window to the bridge's internal registers. */
-	out_le32((u32 *)(bridge_base + MV64x60_MPSC2REGS_BASE),
-			(u32)bridge_pbase);
-
-	out_le32((u32 *)(bridge_base + MV64x60_ENET2MEM_BAR_ENABLE), enables);
-	out_le32((u32 *)(bridge_base + MV64x60_MPSC2MEM_BAR_ENABLE), enables);
-	out_le32((u32 *)(bridge_base + MV64x60_IDMA2MEM_BAR_ENABLE), enables);
-}
-
-/* PCI MEM -> system memory, et. al. setup */
-static struct mv64x60_pci_win mv64x60_pci2mem[2] = {
-	{ /* hose 0 */
-		.fcn	= 0,
-		.hi	= 0x14,
-		.lo	= 0x10,
-		.size	= MV64x60_PCI02MEM_0_SIZE,
-	},
-	{ /* hose 1 */
-		.fcn	= 0,
-		.hi	= 0x94,
-		.lo	= 0x90,
-		.size	= MV64x60_PCI12MEM_0_SIZE,
-	},
-};
-
-static struct
-mv64x60_mem_win mv64x60_pci_acc[2][MV64x60_PCI_ACC_CNTL_WINDOWS] = {
-	{ /* hose 0 */
-		{
-			.hi	= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-			.lo	= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-			.size	= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		},
-		{
-			.hi	= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-			.lo	= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-			.size	= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		},
-		{
-			.hi	= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-			.lo	= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-			.size	= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		},
-		{
-			.hi	= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-			.lo	= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-			.size	= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		},
-	},
-	{ /* hose 1 */
-		{
-			.hi	= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-			.lo	= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-			.size	= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		},
-		{
-			.hi	= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-			.lo	= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-			.size	= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		},
-		{
-			.hi	= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-			.lo	= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-			.size	= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		},
-		{
-			.hi	= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-			.lo	= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-			.size	= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		},
-	},
-};
-
-static struct mv64x60_mem_win mv64x60_pci2reg[2] = {
-	{
-		.hi	= 0x24,
-		.lo	= 0x20,
-		.size	= 0,
-	},
-	{
-		.hi	= 0xa4,
-		.lo	= 0xa0,
-		.size	= 0,
-	},
-};
-
-/* Only need to use 1 window (per hose) to get access to all of system memory */
-void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose,
-		u8 bus, u32 mem_size, u32 acc_bits)
-{
-	u32 i, offset, bar_enable, enables;
-
-	/* Disable all windows but PCI MEM -> Bridge's regs window */
-	enables = ~(1 << 9);
-	bar_enable = hose ? MV64x60_PCI1_BAR_ENABLE : MV64x60_PCI0_BAR_ENABLE;
-	out_le32((u32 *)(bridge_base + bar_enable), enables);
-
-	for (i=0; i<MV64x60_PCI_ACC_CNTL_WINDOWS; i++)
-		out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][i].lo), 0);
-
-	/* If mem_size is 0, leave windows disabled */
-	if (mem_size == 0)
-		return;
-
-	/* Cause automatic updates of PCI remap regs */
-	offset = hose ?
-		MV64x60_PCI1_PCI_DECODE_CNTL : MV64x60_PCI0_PCI_DECODE_CNTL;
-	i = in_le32((u32 *)(bridge_base + offset));
-	out_le32((u32 *)(bridge_base + offset), i & ~0x1);
-
-	mem_size = (mem_size - 1) & 0xfffff000;
-
-	/* Map PCI MEM addr 0 -> System Mem addr 0 */
-	mv64x60_cfg_write(bridge_base, hose, bus,
-			PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn),
-			mv64x60_pci2mem[hose].hi, 0);
-	mv64x60_cfg_write(bridge_base, hose, bus,
-			PCI_DEVFN(0, mv64x60_pci2mem[hose].fcn),
-			mv64x60_pci2mem[hose].lo, 0);
-	out_le32((u32 *)(bridge_base + mv64x60_pci2mem[hose].size),mem_size);
-
-	acc_bits |= MV64x60_PCI_ACC_CNTL_ENABLE;
-	out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].hi), 0);
-	out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].lo), acc_bits);
-	out_le32((u32 *)(bridge_base + mv64x60_pci_acc[hose][0].size),mem_size);
-
-	/* Set PCI MEM->bridge's reg window to where they are in CPU mem map */
-	i = (u32)bridge_base;
-	i &= 0xffff0000;
-	i |= (0x2 << 1);
-	mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0),
-			mv64x60_pci2reg[hose].hi, 0);
-	mv64x60_cfg_write(bridge_base, hose, bus, PCI_DEVFN(0,0),
-			mv64x60_pci2reg[hose].lo, i);
-
-	enables &= ~0x1; /* Enable PCI MEM -> System Mem window 0 */
-	out_le32((u32 *)(bridge_base + bar_enable), enables);
-}
-
-/* CPU -> PCI I/O & MEM setup */
-struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2] = {
-	{ /* hose 0 */
-		.lo		= MV64x60_CPU2PCI0_IO_BASE,
-		.size		= MV64x60_CPU2PCI0_IO_SIZE,
-		.remap_hi	= 0,
-		.remap_lo	= MV64x60_CPU2PCI0_IO_REMAP,
-	},
-	{ /* hose 1 */
-		.lo		= MV64x60_CPU2PCI1_IO_BASE,
-		.size		= MV64x60_CPU2PCI1_IO_SIZE,
-		.remap_hi	= 0,
-		.remap_lo	= MV64x60_CPU2PCI1_IO_REMAP,
-	},
-};
-
-struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2] = {
-	{ /* hose 0 */
-		.lo		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.remap_hi	= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.remap_lo	= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-	},
-	{ /* hose 1 */
-		.lo		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.remap_hi	= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.remap_lo	= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-	},
-};
-
-/* Only need to set up 1 window to pci mem space */
-void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi,
-		u32 pci_base_lo, u32 cpu_base, u32 size,
-		struct mv64x60_cpu2pci_win *offset_tbl)
-{
-	cpu_base >>= 16;
-	cpu_base |= MV64x60_CPU2PCI_SWAP_NONE;
-	out_le32((u32 *)(bridge_base + offset_tbl[hose].lo), cpu_base);
-
-	if (offset_tbl[hose].remap_hi != 0)
-		out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_hi),
-				pci_base_hi);
-	out_le32((u32 *)(bridge_base + offset_tbl[hose].remap_lo),
-			pci_base_lo >> 16);
-
-	size = (size - 1) >> 16;
-	out_le32((u32 *)(bridge_base + offset_tbl[hose].size), size);
-}
-
-/* Read mem ctlr to get the amount of mem in system */
-u32 mv64x60_get_mem_size(u8 *bridge_base)
-{
-	u32 enables, i, v;
-	u32 mem = 0;
-
-	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE)) & 0xf;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		if (!(enables & (1<<i))) {
-			v = in_le32((u32*)(bridge_base
-						+ mv64x60_cpu2mem[i].size));
-			v = ((v & 0xffff) + 1) << 16;
-			mem += v;
-		}
-
-	return mem;
-}
-
-/* Get physical address of bridge's registers */
-u8 *mv64x60_get_bridge_pbase(void)
-{
-	u32 v[2];
-	void *devp;
-
-	devp = find_node_by_compatible(NULL, "marvell,mv64360");
-	if (devp == NULL)
-		goto err_out;
-	if (getprop(devp, "reg", v, sizeof(v)) != sizeof(v))
-		goto err_out;
-
-	return (u8 *)v[0];
-
-err_out:
-	return 0;
-}
-
-/* Get virtual address of bridge's registers */
-u8 *mv64x60_get_bridge_base(void)
-{
-	u32 v;
-	void *devp;
-
-	devp = find_node_by_compatible(NULL, "marvell,mv64360");
-	if (devp == NULL)
-		goto err_out;
-	if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
-		goto err_out;
-
-	return (u8 *)v;
-
-err_out:
-	return 0;
-}
-
-u8 mv64x60_is_coherent(void)
-{
-	u32 v;
-	void *devp;
-
-	devp = finddevice("/");
-	if (devp == NULL)
-		return 1; /* Assume coherency on */
-
-	if (getprop(devp, "coherency-off", &v, sizeof(v)) < 0)
-		return 1; /* Coherency on */
-	else
-		return 0;
-}
--- a/arch/powerpc/boot/mv64x60.h
+++ b/arch/powerpc/boot/mv64x60.h
@ -1,70 +0,0 @@
-/*
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef _PPC_BOOT_MV64x60_H_
-#define _PPC_BOOT_MV64x60_H_
-
-#define MV64x60_CPU_BAR_ENABLE			0x0278
-
-#define MV64x60_PCI_ACC_CNTL_ENABLE		(1<<0)
-#define MV64x60_PCI_ACC_CNTL_REQ64		(1<<1)
-#define MV64x60_PCI_ACC_CNTL_SNOOP_NONE		0x00000000
-#define MV64x60_PCI_ACC_CNTL_SNOOP_WT		0x00000004
-#define MV64x60_PCI_ACC_CNTL_SNOOP_WB		0x00000008
-#define MV64x60_PCI_ACC_CNTL_SNOOP_MASK		0x0000000c
-#define MV64x60_PCI_ACC_CNTL_ACCPROT		(1<<4)
-#define MV64x60_PCI_ACC_CNTL_WRPROT		(1<<5)
-#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE		0x00000000
-#define MV64x60_PCI_ACC_CNTL_SWAP_NONE		0x00000040
-#define MV64x60_PCI_ACC_CNTL_SWAP_BYTE_WORD	0x00000080
-#define MV64x60_PCI_ACC_CNTL_SWAP_WORD		0x000000c0
-#define MV64x60_PCI_ACC_CNTL_SWAP_MASK		0x000000c0
-#define MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES	0x00000000
-#define MV64x60_PCI_ACC_CNTL_MBURST_64_BYTES	0x00000100
-#define MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES	0x00000200
-#define MV64x60_PCI_ACC_CNTL_MBURST_MASK	0x00000300
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES	0x00000000
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_64_BYTES	0x00000400
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_128_BYTES	0x00000800
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES	0x00000c00
-#define MV64x60_PCI_ACC_CNTL_RDSIZE_MASK	0x00000c00
-
-struct mv64x60_cpu2pci_win {
-	u32 lo;
-	u32 size;
-	u32 remap_hi;
-	u32 remap_lo;
-};
-
-extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_io[2];
-extern struct mv64x60_cpu2pci_win mv64x60_cpu2pci_mem[2];
-
-u32 mv64x60_cfg_read(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
-		u8 offset);
-void mv64x60_cfg_write(u8 *bridge_base, u8 hose, u8 bus, u8 devfn,
-		u8 offset, u32 val);
-
-void mv64x60_config_ctlr_windows(u8 *bridge_base, u8 *bridge_pbase,
-		u8 is_coherent);
-void mv64x60_config_pci_windows(u8 *bridge_base, u8 *bridge_pbase, u8 hose,
-		u8 bus, u32 mem_size, u32 acc_bits);
-void mv64x60_config_cpu2pci_window(u8 *bridge_base, u8 hose, u32 pci_base_hi,
-		u32 pci_base_lo, u32 cpu_base, u32 size,
-		struct mv64x60_cpu2pci_win *offset_tbl);
-u32 mv64x60_get_mem_size(u8 *bridge_base);
-u8 *mv64x60_get_bridge_pbase(void);
-u8 *mv64x60_get_bridge_base(void);
-u8 mv64x60_is_coherent(void);
-
-int mv64x60_i2c_open(void);
-int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
-		u32 count);
-void mv64x60_i2c_close(void);
-
-#endif /* _PPC_BOOT_MV64x60_H_ */
--- a/arch/powerpc/boot/mv64x60_i2c.c
+++ b/arch/powerpc/boot/mv64x60_i2c.c
@ -1,204 +0,0 @@
-/*
- * Bootloader version of the i2c driver for the MV64x60.
- *
- * Author: Dale Farnsworth <dfarnsworth@mvista.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003, 2007 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program is
- * licensed "as is" without any warranty of any kind, whether express or
- * implied.
- */
-
-#include <stdarg.h>
-#include <stddef.h>
-#include "types.h"
-#include "elf.h"
-#include "page.h"
-#include "string.h"
-#include "stdio.h"
-#include "io.h"
-#include "ops.h"
-#include "mv64x60.h"
-
-/* Register defines */
-#define MV64x60_I2C_REG_SLAVE_ADDR			0x00
-#define MV64x60_I2C_REG_DATA				0x04
-#define MV64x60_I2C_REG_CONTROL				0x08
-#define MV64x60_I2C_REG_STATUS				0x0c
-#define MV64x60_I2C_REG_BAUD				0x0c
-#define MV64x60_I2C_REG_EXT_SLAVE_ADDR			0x10
-#define MV64x60_I2C_REG_SOFT_RESET			0x1c
-
-#define MV64x60_I2C_CONTROL_ACK				0x04
-#define MV64x60_I2C_CONTROL_IFLG			0x08
-#define MV64x60_I2C_CONTROL_STOP			0x10
-#define MV64x60_I2C_CONTROL_START			0x20
-#define MV64x60_I2C_CONTROL_TWSIEN			0x40
-#define MV64x60_I2C_CONTROL_INTEN			0x80
-
-#define MV64x60_I2C_STATUS_BUS_ERR			0x00
-#define MV64x60_I2C_STATUS_MAST_START			0x08
-#define MV64x60_I2C_STATUS_MAST_REPEAT_START		0x10
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK		0x18
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_NO_ACK		0x20
-#define MV64x60_I2C_STATUS_MAST_WR_ACK			0x28
-#define MV64x60_I2C_STATUS_MAST_WR_NO_ACK		0x30
-#define MV64x60_I2C_STATUS_MAST_LOST_ARB		0x38
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK		0x40
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_NO_ACK		0x48
-#define MV64x60_I2C_STATUS_MAST_RD_DATA_ACK		0x50
-#define MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK		0x58
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_ACK		0xd0
-#define MV64x60_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK	0xd8
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_ACK		0xe0
-#define MV64x60_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK	0xe8
-#define MV64x60_I2C_STATUS_NO_STATUS			0xf8
-
-static u8 *ctlr_base;
-
-static int mv64x60_i2c_wait_for_status(int wanted)
-{
-	int i;
-	int status;
-
-	for (i=0; i<1000; i++) {
-		udelay(10);
-		status = in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_STATUS))
-			& 0xff;
-		if (status == wanted)
-			return status;
-	}
-	return -status;
-}
-
-static int mv64x60_i2c_control(int control, int status)
-{
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
-	return mv64x60_i2c_wait_for_status(status);
-}
-
-static int mv64x60_i2c_read_byte(int control, int status)
-{
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
-	if (mv64x60_i2c_wait_for_status(status) < 0)
-		return -1;
-	return in_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA)) & 0xff;
-}
-
-static int mv64x60_i2c_write_byte(int data, int control, int status)
-{
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_DATA), data & 0xff);
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_CONTROL), control & 0xff);
-	return mv64x60_i2c_wait_for_status(status);
-}
-
-int mv64x60_i2c_read(u32 devaddr, u8 *buf, u32 offset, u32 offset_size,
-		 u32 count)
-{
-	int i;
-	int data;
-	int control;
-	int status;
-
-	if (ctlr_base == NULL)
-		return -1;
-
-	/* send reset */
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SOFT_RESET), 0);
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_SLAVE_ADDR), 0);
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_EXT_SLAVE_ADDR), 0);
-	out_le32((u32 *)(ctlr_base + MV64x60_I2C_REG_BAUD), (4 << 3) | 0x4);
-
-	if (mv64x60_i2c_control(MV64x60_I2C_CONTROL_TWSIEN,
-				MV64x60_I2C_STATUS_NO_STATUS) < 0)
-		return -1;
-
-	/* send start */
-	control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_MAST_START;
-	if (mv64x60_i2c_control(control, status) < 0)
-		return -1;
-
-	/* select device for writing */
-	data = devaddr & ~0x1;
-	control = MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_MAST_WR_ADDR_ACK;
-	if (mv64x60_i2c_write_byte(data, control, status) < 0)
-		return -1;
-
-	/* send offset of data */
-	control = MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_MAST_WR_ACK;
-	if (offset_size > 1) {
-		if (mv64x60_i2c_write_byte(offset >> 8, control, status) < 0)
-			return -1;
-	}
-	if (mv64x60_i2c_write_byte(offset, control, status) < 0)
-		return -1;
-
-	/* resend start */
-	control = MV64x60_I2C_CONTROL_START | MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_MAST_REPEAT_START;
-	if (mv64x60_i2c_control(control, status) < 0)
-		return -1;
-
-	/* select device for reading */
-	data = devaddr | 0x1;
-	control = MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_MAST_RD_ADDR_ACK;
-	if (mv64x60_i2c_write_byte(data, control, status) < 0)
-		return -1;
-
-	/* read all but last byte of data */
-	control = MV64x60_I2C_CONTROL_ACK | MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_MAST_RD_DATA_ACK;
-
-	for (i=1; i<count; i++) {
-		data = mv64x60_i2c_read_byte(control, status);
-		if (data < 0) {
-			printf("errors on iteration %d\n", i);
-			return -1;
-		}
-		*buf++ = data;
-	}
-
-	/* read last byte of data */
-	control = MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_MAST_RD_DATA_NO_ACK;
-	data = mv64x60_i2c_read_byte(control, status);
-	if (data < 0)
-		return -1;
-	*buf++ = data;
-
-	/* send stop */
-	control = MV64x60_I2C_CONTROL_STOP | MV64x60_I2C_CONTROL_TWSIEN;
-	status = MV64x60_I2C_STATUS_NO_STATUS;
-	if (mv64x60_i2c_control(control, status) < 0)
-		return -1;
-
-	return count;
-}
-
-int mv64x60_i2c_open(void)
-{
-	u32 v;
-	void *devp;
-
-	devp = find_node_by_compatible(NULL, "marvell,mv64360-i2c");
-	if (devp == NULL)
-		goto err_out;
-	if (getprop(devp, "virtual-reg", &v, sizeof(v)) != sizeof(v))
-		goto err_out;
-
-	ctlr_base = (u8 *)v;
-	return 0;
-
-err_out:
-	return -1;
-}
-
-void mv64x60_i2c_close(void)
-{
-	ctlr_base = NULL;
-}
--- a/arch/powerpc/boot/ops.h
+++ b/arch/powerpc/boot/ops.h
@ -86,7 +86,6 @@ void start(void);
 void fdt_init(void *blob);
 int serial_console_init(void);
 int ns16550_console_init(void *devp, struct serial_console_data *scdp);
-int mpsc_console_init(void *devp, struct serial_console_data *scdp);
 int cpm_console_init(void *devp, struct serial_console_data *scdp);
 int mpc5200_psc_console_init(void *devp, struct serial_console_data *scdp);
 int uartlite_console_init(void *devp, struct serial_console_data *scdp);
--- a/arch/powerpc/boot/serial.c
+++ b/arch/powerpc/boot/serial.c
@ -120,10 +120,6 @@ int serial_console_init(void)
 	if (dt_is_compatible(devp, "ns16550") ||
 	    dt_is_compatible(devp, "pnpPNP,501"))
 		rc = ns16550_console_init(devp, &serial_cd);
-#ifdef CONFIG_EMBEDDED6xx
-	else if (dt_is_compatible(devp, "marvell,mv64360-mpsc"))
-		rc = mpsc_console_init(devp, &serial_cd);
-#endif
 #ifdef CONFIG_CPM
 	else if (dt_is_compatible(devp, "fsl,cpm1-scc-uart") ||
 	         dt_is_compatible(devp, "fsl,cpm1-smc-uart") ||
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@ -1,74 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EXPERT=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_PPC_83xx=y
-CONFIG_SBC834x=y
-CONFIG_GEN_RTC=y
-CONFIG_PCI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_SYN_COOKIES=y
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_SCSI=y
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_GIANFAR=y
-CONFIG_BROADCOM_PHY=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_STORAGE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_HW is not set
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@ -1,389 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_OSF_PARTITION=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-# CONFIG_PPC_CHRP is not set
-# CONFIG_PPC_PMAC is not set
-CONFIG_EMBEDDED6xx=y
-CONFIG_PPC_C2K=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_GEN_RTC=y
-CONFIG_HIGHMEM=y
-CONFIG_PREEMPT_VOLUNTARY=y
-CONFIG_BINFMT_MISC=y
-CONFIG_PM=y
-CONFIG_PCI_MSI=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_SHPC=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_NET_IPIP=m
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_IP_SCTP=m
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-CONFIG_ATM_LANE=m
-CONFIG_ATM_BR2684=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_IND=y
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_ARCMSR=m
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_MEGARAID_SAS=m
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NETCONSOLE=m
-CONFIG_TUN=m
-# CONFIG_ATM_DRIVERS is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_VITESSE_PHY=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_NVRAM=m
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=8192
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_MV64XXX=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_VIA686A=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_SOFT_WATCHDOG=m
-CONFIG_PCIPCWATCHDOG=m
-CONFIG_WDTPCI=m
-CONFIG_USBPCWATCHDOG=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=m
-CONFIG_USB_MON=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_UHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_MDC800=m
-CONFIG_USB_MICROTEK=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_BELKIN=m
-CONFIG_USB_SERIAL_WHITEHEAT=m
-CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-CONFIG_USB_SERIAL_EMPEG=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_VISOR=m
-CONFIG_USB_SERIAL_IPAQ=m
-CONFIG_USB_SERIAL_IR=m
-CONFIG_USB_SERIAL_EDGEPORT=m
-CONFIG_USB_SERIAL_EDGEPORT_TI=m
-CONFIG_USB_SERIAL_KEYSPAN_PDA=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_KOBIL_SCT=m
-CONFIG_USB_SERIAL_MCT_U232=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SAFE=m
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-CONFIG_USB_SERIAL_CYBERJACK=m
-CONFIG_USB_SERIAL_XIRCOM=m
-CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_RIO500=m
-CONFIG_USB_LEGOTOWER=m
-CONFIG_USB_LCD=m
-CONFIG_USB_LED=m
-CONFIG_USB_TEST=m
-CONFIG_USB_ATM=m
-CONFIG_USB_SPEEDTOUCH=m
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_USER_MAD=m
-CONFIG_INFINIBAND_USER_ACCESS=m
-CONFIG_INFINIBAND_MTHCA=m
-CONFIG_INFINIBAND_IPOIB=m
-CONFIG_INFINIBAND_IPOIB_CM=y
-CONFIG_INFINIBAND_SRP=m
-CONFIG_DMADEVICES=y
-CONFIG_EXT4_FS=m
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="utf8"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_CRC_CCITT=m
-CONFIG_CRC_T10DIF=m
-CONFIG_DEBUG_INFO=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_STACK_USAGE=y
-CONFIG_DEBUG_HIGHMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SPINLOCK=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_PPC_EARLY_DEBUG=y
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-CONFIG_SECURITY_SELINUX_DISABLE=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@ -38,7 +38,9 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_PARTITION_ADVANCED=y
+CONFIG_SCOM_DEBUGFS=y
 CONFIG_OPAL_PRD=y
+CONFIG_PPC_MEMTRACE=y
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
@ -54,7 +56,10 @@ CONFIG_NUMA=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTREMOVE=y
 CONFIG_KSM=y
+CONFIG_MEMORY_FAILURE=y
+CONFIG_HWPOISON_INJECT=m
 CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
 CONFIG_PPC_64K_PAGES=y
 CONFIG_PPC_SUBPAGE_PROT=y
 CONFIG_SCHED_SMT=y
@ -72,7 +77,13 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
-# CONFIG_IPV6 is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
 CONFIG_BRIDGE=m
@ -81,33 +92,28 @@ CONFIG_NET_SCHED=y
 CONFIG_NET_CLS_BPF=m
 CONFIG_NET_CLS_ACT=y
 CONFIG_NET_ACT_BPF=m
+CONFIG_DNS_RESOLVER=y
 CONFIG_BPF_JIT=y
+# CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_POWERNV_FLASH=y
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_BLK_DEV_FD=m
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM=m
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_VIRTIO_BLK=m
 CONFIG_BLK_DEV_NVME=y
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
-CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SG=m
 CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=m
 CONFIG_SCSI_SRP_ATTRS=y
 CONFIG_SCSI_CXGB3_ISCSI=m
 CONFIG_SCSI_CXGB4_ISCSI=m
@ -121,7 +127,6 @@ CONFIG_SCSI_IPR=y
 CONFIG_SCSI_QLA_FC=m
 CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_VIRTIO=m
 CONFIG_SCSI_DH=y
 CONFIG_SCSI_DH_RDAC=m
 CONFIG_SCSI_DH_ALUA=m
@ -152,16 +157,16 @@ CONFIG_DUMMY=m
 CONFIG_MACVLAN=m
 CONFIG_MACVTAP=m
 CONFIG_VXLAN=m
-CONFIG_NETCONSOLE=y
+CONFIG_NETCONSOLE=m
 CONFIG_TUN=m
 CONFIG_VETH=m
-CONFIG_VIRTIO_NET=m
 CONFIG_VORTEX=m
 CONFIG_ACENIC=m
 CONFIG_ACENIC_OMIT_TIGON_I=y
 CONFIG_PCNET32=m
 CONFIG_TIGON3=y
 CONFIG_BNX2X=m
+# CONFIG_CAVIUM_PTP is not set
 CONFIG_CHELSIO_T1=m
 CONFIG_BE2NET=m
 CONFIG_S2IO=m
@ -172,46 +177,62 @@ CONFIG_IXGB=m
 CONFIG_IXGBE=m
 CONFIG_I40E=m
 CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_FPGA=y
+CONFIG_MLX5_CORE_EN=y
+CONFIG_MLX5_CORE_IPOIB=y
 CONFIG_MYRI10GE=m
 CONFIG_QLGE=m
 CONFIG_NETXEN_NIC=m
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
+CONFIG_USB_NET_DRIVERS=m
+# CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_MISC=y
-# CONFIG_SERIO_SERPORT is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=m
 CONFIG_SERIAL_JSM=m
-CONFIG_VIRTIO_CONSOLE=m
 CONFIG_IPMI_HANDLER=y
 CONFIG_IPMI_DEVICE_INTERFACE=y
 CONFIG_IPMI_POWERNV=y
-CONFIG_RAW_DRIVER=y
-CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_DEVPORT is not set
 CONFIG_I2C_CHARDEV=y
+# CONFIG_PTP_1588_CLOCK is not set
 CONFIG_DRM=y
 CONFIG_DRM_AST=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_OF=y
-CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX=m
 CONFIG_FB_MATROX_MILLENIUM=y
 CONFIG_FB_MATROX_MYSTIQUE=y
 CONFIG_FB_MATROX_G=y
-CONFIG_FB_RADEON=y
-CONFIG_FB_IBM_GXT4500=y
+CONFIG_FB_RADEON=m
+CONFIG_FB_IBM_GXT4500=m
 CONFIG_LCD_PLATFORM=m
+CONFIG_BACKLIGHT_GENERIC=m
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_LOGO=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SUNPLUS=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_EZKEY=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_ITE=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_PANTHERLORD=m
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_USB_HID=m
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
 CONFIG_USB_MON=m
@ -219,6 +240,7 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PCI=m
 CONFIG_USB_STORAGE=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
@ -236,8 +258,9 @@ CONFIG_INFINIBAND_SRP=m
 CONFIG_INFINIBAND_ISER=m
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_GENERIC=y
-CONFIG_VIRTIO_PCI=m
-CONFIG_VIRTIO_BALLOON=m
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_LIBNVDIMM=y
+# CONFIG_ND_BLK is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
@ -253,12 +276,13 @@ CONFIG_XFS_POSIX_ACL=y
 CONFIG_BTRFS_FS=m
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
+CONFIG_FANOTIFY=y
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=m
 CONFIG_OVERLAY_FS=m
 CONFIG_ISO9660_FS=y
 CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
+CONFIG_MSDOS_FS=m
 CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
@ -270,9 +294,9 @@ CONFIG_SQUASHFS_XATTR=y
 CONFIG_SQUASHFS_LZO=y
 CONFIG_SQUASHFS_XZ=y
 CONFIG_PSTORE=y
-CONFIG_NFS_FS=y
+CONFIG_NFS_FS=m
 CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
+CONFIG_NFS_V4=m
 CONFIG_NFSD=m
 CONFIG_NFSD_V3_ACL=y
 CONFIG_NFSD_V4=y
@ -291,9 +315,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_SOFTLOCKUP_DETECTOR=y
 CONFIG_HARDLOCKUP_DETECTOR=y
 CONFIG_LATENCYTOP=y
-CONFIG_FTRACE=y
 CONFIG_FUNCTION_TRACER=y
-CONFIG_FUNCTION_GRAPH_TRACER=y
 CONFIG_SCHED_TRACER=y
 CONFIG_FTRACE_SYSCALLS=y
 CONFIG_BLK_DEV_IO_TRACE=y
@ -303,10 +325,10 @@ CONFIG_FTR_FIXUP_SELFTEST=y
 CONFIG_MSI_BITMAP_SELFTEST=y
 CONFIG_XMON=y
 CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_CCM=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_CRC32C_VPMSUM=m
+CONFIG_CRYPTO_CRCT10DIF_VPMSUM=m
 CONFIG_CRYPTO_MD5_PPC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1_PPC=m
--- a/Show more
+++ b/Show more