ARM: SoC platform updates for v4.3

New or improved SoC support: - Addition of support for Atmel's SAMA5D2 SoC - Addition of Freescale i.MX6UL - Improved support of TI's DM814x platform - Misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - Power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - Clk fixes for TI DM814/816X + a bunch of other changes for various platforms -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV5Mo6AAoJEIwa5zzehBx3VnMP/28LFJVUjIbd2xjJBo2gbSwV jN7uGlTkKU+1kHjZqnUPuirlBxBzsXKgRfBvCoeu0cPOggwmFcaF915/HHPz7xuz vTP7k98+Y5nSXScIohWkWCdZTpKKjve4sn74rXmiNakTUiuaHf5lKut/m7ldVrWd hN1o9W4LN+5O1mOYbc9ZD98v3bkDb6eu+a22oK7qemXiEiQi+NIMoDx+IR2bd4pA FeDaW7sOFWTEYU/p+M5nZNvI3n53P0/mlB5rPRiAYRjhQf9DrWHm5G7HdnMkUkgo /s8/QlVjBkJwhkY0TqpwtHY23JjSSB6UtCnXzb1eVAkX1nJN6PJQpcpCz1zJhd9q +sJ2k1zEvrfomJCK7/iZ1ubQE09KlJLEeb8xi5xCwD0MBOBAYC31bovDVAswCitV 8NHnfltEG+wCMyX955eqqGkVxkcw8sJMJUK5A95aK6w+vKqjd7gUgLJjXFC1u4eN ECuVVUf1hVmUEmM799CDayTlfGDt4oGLmHGao+SiSCVc1XbG9HkWr7Lcgr6u9UHr lNv3RIe6Axb85xxIU0/9hqLHrtB85uEQjjlbnQx3o7u8RsSOeaiZvCz4BzcjP9E1 VGyD6zkRWhuDiMFlPVXiAX0qIH5xSjIWkC0wPNJNy8eWFH9tkfGL0mOlLbl09oGR gtuvOrjbF/BhILkPw38y =8T5Z -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ...
2026-10-18 21:58:11 +07:00 · 2015-09-01 12:18:40 -07:00 · 2015-09-01 12:18:40 -07:00 · 50686e8a3a
commit 50686e8a3a
parent c5fc249862 1ec6f70170
100 changed files with 2728 additions and 517 deletions
--- a/Documentation/arm/Atmel/README
+++ b/Documentation/arm/Atmel/README
@ -90,6 +90,11 @@ the Atmel website: http://www.atmel.com.
        + Datasheet
          http://www.atmel.com/Images/Atmel-11238-32-bit-Cortex-A5-Microcontroller-SAMA5D4_Datasheet.pdf

+      - sama5d2 family
+        - sama5d27
+        + Datasheet
+          Coming soon
+

 Linux kernel information
 ------------------------
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@ -27,6 +27,8 @@ compatible: must be one of:
    o "atmel,at91sam9xe"
 * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
   SoC family:
+    o "atmel,sama5d2" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d27"
    o "atmel,sama5d3" shall be extended with the specific SoC compatible:
       - "atmel,sama5d31"
       - "atmel,sama5d33"
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@ -305,12 +305,13 @@ Secure Non-Volatile Storage (SNVS) Node
    Node defines address range and the associated
    interrupt for the SNVS function.  This function
    monitors security state information & reports
-    security violations.
+    security violations. This also included rtc,
+    system power off and ON/OFF key.

  - compatible
      Usage: required
      Value type: <string>
-      Definition: Must include "fsl,sec-v4.0-mon".
+      Definition: Must include "fsl,sec-v4.0-mon" and "syscon".

  - reg
      Usage: required
@ -341,7 +342,7 @@ Secure Non-Volatile Storage (SNVS) Node
           the child address, parent address, & length.

   - interrupts
-      Usage: required
+      Usage: optional
      Value type: <prop_encoded-array>
      Definition:  Specifies the interrupts generated by this
           device.  The value of the interrupts property
@ -358,7 +359,7 @@ Secure Non-Volatile Storage (SNVS) Node

 EXAMPLE
 	sec_mon@314000 {
-		compatible = "fsl,sec-v4.0-mon";
+		compatible = "fsl,sec-v4.0-mon", "syscon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
 		interrupt-parent = <&mpic>;
@ -375,16 +376,72 @@ Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node
      Value type: <string>
      Definition: Must include "fsl,sec-v4.0-mon-rtc-lp".

-  - reg
+  - interrupts
      Usage: required
-      Value type: <prop-encoded-array>
-      Definition: A standard property.  Specifies the physical
-          address and length of the SNVS LP configuration registers.
+      Value type: <prop_encoded-array>
+      Definition: Specifies the interrupts generated by this
+	   device.  The value of the interrupts property
+	   consists of one interrupt specifier. The format
+	   of the specifier is defined by the binding document
+	   describing the node's interrupt parent.
+
+ - regmap
+	Usage: required
+	Value type: <phandle>
+	Definition: this is phandle to the register map node.
+
+ - offset
+	Usage: option
+	value type: <u32>
+	Definition: LP register offset. default it is 0x34.

 EXAMPLE
-	sec_mon_rtc_lp@314000 {
+	sec_mon_rtc_lp@1 {
 		compatible = "fsl,sec-v4.0-mon-rtc-lp";
-		reg = <0x34 0x58>;
+		interrupts = <93 2>;
+		regmap = <&snvs>;
+		offset = <0x34>;
+	};
+
+=====================================================================
+System ON/OFF key driver
+
+  The snvs-pwrkey is designed to enable POWER key function which controlled
+  by SNVS ONOFF, the driver can report the status of POWER key and wakeup
+  system if pressed after system suspend.
+
+  - compatible:
+      Usage: required
+      Value type: <string>
+      Definition: Mush include "fsl,sec-v4.0-pwrkey".
+
+  - interrupts:
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition: The SNVS ON/OFF interrupt number to the CPU(s).
+
+  - linux,keycode:
+      Usage: option
+      Value type: <int>
+      Definition: Keycode to emit, KEY_POWER by default.
+
+  - wakeup-source:
+      Usage: option
+      Value type: <boo>
+      Definition: Button can wake-up the system.
+
+ - regmap:
+      Usage: required:
+      Value type: <phandle>
+      Definition: this is phandle to the register map node.
+
+EXAMPLE:
+	snvs-pwrkey@0x020cc000 {
+		compatible = "fsl,sec-v4.0-pwrkey";
+		regmap = <&snvs>;
+		interrupts = <0 4 0x4>
+	        linux,keycode = <116>; /* KEY_POWER */
+		wakeup;
 	};

 =====================================================================
@ -460,12 +517,20 @@ FULL EXAMPLE
 		compatible = "fsl,sec-v4.0-mon";
 		reg = <0x314000 0x1000>;
 		ranges = <0 0x314000 0x1000>;
-		interrupt-parent = <&mpic>;
-		interrupts = <93 2>;

 		sec_mon_rtc_lp@34 {
 			compatible = "fsl,sec-v4.0-mon-rtc-lp";
-			reg = <0x34 0x58>;
+			regmap = <&sec_mon>;
+			offset = <0x34>;
+			interrupts = <93 2>;
+		};
+
+		snvs-pwrkey@0x020cc000 {
+			compatible = "fsl,sec-v4.0-pwrkey";
+			regmap = <&sec_mon>;
+			interrupts = <0 4 0x4>;
+			linux,keycode = <116>; /* KEY_POWER */
+			wakeup;
 		};
 	};

--- a/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
+++ b/Documentation/devicetree/bindings/input/snvs-pwrkey.txt
@ -0,0 +1 @@
+See Documentation/devicetree/bindings/crypto/fsl-sec4.txt
--- a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@ -0,0 +1,26 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+  * one for the input reference
+  * one for the the SoC RTC
+- clock-names: should contain:
+  * "ref" for the input reference clock
+  * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc@10007000 {
+	compatible = "fsl,imx21-rtc";
+	reg = <0x10007000 0x1000>;
+	interrupts = <22>;
+	clocks = <&clks IMX27_CLK_CKIL>,
+		 <&clks IMX27_CLK_RTC_IPG_GATE>;
+	clock-names = "ref", "ipg";
+};
--- a/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/scpsys.txt
@ -0,0 +1,41 @@
+MediaTek SCPSYS
+===============
+
+The System Control Processor System (SCPSYS) has several power management
+related tasks in the system. The tasks include thermal measurement, dynamic
+voltage frequency scaling (DVFS), interrupt filter and lowlevel sleep control.
+The System Power Manager (SPM) inside the SCPSYS is for the MTCMOS power
+domain control.
+
+The driver implements the Generic PM domain bindings described in
+power/power_domain.txt. It provides the power domains defined in
+include/dt-bindings/power/mt8173-power.h.
+
+Required properties:
+- compatible: Must be "mediatek,mt8173-scpsys"
+- #power-domain-cells: Must be 1
+- reg: Address range of the SCPSYS unit
+- infracfg: must contain a phandle to the infracfg controller
+- clock, clock-names: clocks according to the common clock binding.
+                      The clocks needed "mm" and "mfg". These are the
+		      clocks which hardware needs to be enabled before
+		      enabling certain power domains.
+
+Example:
+
+	scpsys: scpsys@10006000 {
+		#power-domain-cells = <1>;
+		compatible = "mediatek,mt8173-scpsys";
+		reg = <0 0x10006000 0 0x1000>;
+		infracfg = <&infracfg>;
+		clocks = <&clk26m>,
+			 <&topckgen CLK_TOP_MM_SEL>;
+		clock-names = "mfg", "mm";
+	};
+
+Example consumer:
+
+	afe: mt8173-afe-pcm@11220000 {
+		compatible = "mediatek,mt8173-afe-pcm";
+		power-domains = <&scpsys MT8173_POWER_DOMAIN_AUDIO>;
+	};
--- a/5
+++ b/5
@ -1583,7 +1583,10 @@ ARM/UNIPHIER ARCHITECTURE
 M:	Masahiro Yamada <yamada.masahiro@socionext.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	arch/arm/boot/dts/uniphier*
 F:	arch/arm/mach-uniphier/
+F:	drivers/pinctrl/uniphier/
+F:	drivers/tty/serial/8250/8250_uniphier.c
 N:	uniphier

 ARM/Ux500 ARM ARCHITECTURE
@ -1678,7 +1681,7 @@ M:	Michal Simek <michal.simek@xilinx.com>
 R:	Sören Brinkmann <soren.brinkmann@xilinx.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://wiki.xilinx.com
-T:	git git://git.xilinx.com/linux-xlnx.git
+T:	git https://github.com/Xilinx/linux-xlnx.git
 S:	Supported
 F:	arch/arm/mach-zynq/
 F:	drivers/cpuidle/cpuidle-zynq.c
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@ -141,6 +141,12 @@ choice
 		depends on ARCH_AT91
 		depends on SOC_SAMA5

+	config AT91_DEBUG_LL_DBGU3
+		bool "Kernel low-level debugging on sama5d2"
+		select DEBUG_AT91_UART
+		depends on ARCH_AT91
+		depends on SOC_SAMA5
+
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
 		depends on ARCH_BCM2835
@ -411,6 +417,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6SX.

+	config DEBUG_IMX6UL_UART
+		bool "i.MX6UL Debug UART"
+		depends on SOC_IMX6UL
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6UL.
+
 	config DEBUG_IMX7D_UART
 		bool "i.MX7D Debug UART"
 		depends on SOC_IMX7D
@ -1269,6 +1282,7 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX6Q_UART || \
 						DEBUG_IMX6SL_UART || \
 						DEBUG_IMX6SX_UART || \
+						DEBUG_IMX6UL_UART || \
 						DEBUG_IMX7D_UART
 	default 1
 	depends on ARCH_MXC
@ -1320,6 +1334,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
+				 DEBUG_IMX6UL_UART || \
 				 DEBUG_IMX7D_UART
 	default "debug/ks8695.S" if DEBUG_KS8695_UART
 	default "debug/msm.S" if DEBUG_QCOM_UARTDM
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@ -86,6 +86,7 @@
 			prcm: prcm@1f0000 {
 				compatible = "ti,am4-prcm";
 				reg = <0x1f0000 0x11000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;

 				prcm_clocks: clocks {
 					#address-cells = <1>;
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@ -13,9 +13,12 @@
 #define AT91_DBGU 0xfffff200 /* AT91_BASE_DBGU0 */
 #elif defined(CONFIG_AT91_DEBUG_LL_DBGU1)
 #define AT91_DBGU 0xffffee00 /* AT91_BASE_DBGU1 */
-#else
+#elif defined(CONFIG_AT91_DEBUG_LL_DBGU2)
 /* On sama5d4, use USART3 as low level serial console */
 #define AT91_DBGU 0xfc00c000 /* SAMA5D4_BASE_USART3 */
+#else
+/* On sama5d2, use UART1 as low level serial console */
+#define AT91_DBGU 0xf8020000
 #endif

 #ifdef CONFIG_MMU
--- a/arch/arm/include/debug/imx-uart.h
+++ b/arch/arm/include/debug/imx-uart.h
@ -90,6 +90,17 @@
 #define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
 #define IMX6SX_UART_BASE(n)	IMX6SX_UART_BASE_ADDR(n)

+#define IMX6UL_UART1_BASE_ADDR	0x02020000
+#define IMX6UL_UART2_BASE_ADDR	0x021e8000
+#define IMX6UL_UART3_BASE_ADDR	0x021ec000
+#define IMX6UL_UART4_BASE_ADDR	0x021f0000
+#define IMX6UL_UART5_BASE_ADDR	0x021f4000
+#define IMX6UL_UART6_BASE_ADDR	0x021fc000
+#define IMX6UL_UART7_BASE_ADDR	0x02018000
+#define IMX6UL_UART8_BASE_ADDR	0x02024000
+#define IMX6UL_UART_BASE_ADDR(n) IMX6UL_UART##n##_BASE_ADDR
+#define IMX6UL_UART_BASE(n)	IMX6UL_UART_BASE_ADDR(n)
+
 #define IMX7D_UART1_BASE_ADDR	0x30860000
 #define IMX7D_UART2_BASE_ADDR	0x30890000
 #define IMX7D_UART3_BASE_ADDR	0x30880000
@ -124,6 +135,8 @@
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SL)
 #elif defined(CONFIG_DEBUG_IMX6SX_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SX)
+#elif defined(CONFIG_DEBUG_IMX6UL_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6UL)
 #elif defined(CONFIG_DEBUG_IMX7D_UART)
 #define UART_PADDR	IMX_DEBUG_UART_BASE(IMX7D)

--- a/arch/arm/include/debug/zynq.S
+++ b/arch/arm/include/debug/zynq.S
@ -38,7 +38,7 @@
 		.endm

 		.macro	senduart,rd,rx
-		str	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
+		strb	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
 		.endm

 		.macro	waituart,rd,rx
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@ -8,6 +8,18 @@ menuconfig ARCH_AT91
 	select SOC_BUS

 if ARCH_AT91
+config SOC_SAMA5D2
+	bool "SAMA5D2 family" if ARCH_MULTI_V7
+	select SOC_SAMA5
+	select CACHE_L2X0
+	select HAVE_FB_ATMEL
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_H32MX
+	select HAVE_AT91_GENERATED_CLK
+	help
+	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
+
 config SOC_SAMA5D3
 	bool "SAMA5D3 family" if ARCH_MULTI_V7
 	select SOC_SAMA5
--- a/arch/arm/mach-at91/sama5.c
+++ b/arch/arm/mach-at91/sama5.c
@ -18,6 +18,8 @@
 #include "soc.h"

 static const struct at91_soc sama5_socs[] = {
+	AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27_EXID_MATCH,
+		 "sama5d27", "sama5d2"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
 		 "sama5d31", "sama5d3"),
 	AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
@ -64,6 +66,7 @@ DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
 MACHINE_END

 static const char *const sama5_alt_dt_board_compat[] __initconst = {
+	"atmel,sama5d2",
 	"atmel,sama5d4",
 	NULL
 };
--- a/arch/arm/mach-at91/soc.h
+++ b/arch/arm/mach-at91/soc.h
@ -62,6 +62,9 @@ at91_soc_init(const struct at91_soc *socs);
 #define AT91SAM9XE256_CIDR_MATCH	0x329a93a0
 #define AT91SAM9XE512_CIDR_MATCH	0x329aa3a0

+#define SAMA5D2_CIDR_MATCH		0x0a5c08c0
+#define SAMA5D27_EXID_MATCH		0x00000021
+
 #define SAMA5D3_CIDR_MATCH		0x0a5c07c0
 #define SAMA5D31_EXID_MATCH		0x00444300
 #define SAMA5D33_EXID_MATCH		0x00414300
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@ -140,10 +140,12 @@ config ARCH_BCM_63XX
 config ARCH_BRCMSTB
 	bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
 	select ARM_GIC
+	select ARM_ERRATA_798181 if SMP
 	select HAVE_ARM_ARCH_TIMER
 	select BRCMSTB_GISB_ARB
 	select BRCMSTB_L2_IRQ
 	select BCM7120_L2_IRQ
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	help
 	  Say Y if you intend to run the kernel on a Broadcom ARM-based STB
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@ -85,23 +85,13 @@ static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type)
 	return 0;
 }

-/*
- * Faking this allows us to to work with suspend functions of
- * generic drivers which call {enable|disable}_irq_wake for
- * wake up interrupt sources (eg RTC on DA850).
- */
-static int cp_intc_set_wake(struct irq_data *d, unsigned int on)
-{
-	return 0;
-}
-
 static struct irq_chip cp_intc_irq_chip = {
 	.name		= "cp_intc",
 	.irq_ack	= cp_intc_ack_irq,
 	.irq_mask	= cp_intc_mask_irq,
 	.irq_unmask	= cp_intc_unmask_irq,
 	.irq_set_type	= cp_intc_set_irq_type,
-	.irq_set_wake	= cp_intc_set_wake,
+	.flags		= IRQCHIP_SKIP_SET_WAKE,
 };

 static struct irq_domain *cp_intc_domain;
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@ -548,6 +548,14 @@ config SOC_IMX6SX
 	help
 	  This enables support for Freescale i.MX6 SoloX processor.

+config SOC_IMX6UL
+	bool "i.MX6 UltraLite support"
+	select PINCTRL_IMX6UL
+	select SOC_IMX6
+
+	help
+	  This enables support for Freescale i.MX6 UltraLite processor.
+
 config SOC_IMX7D
 	bool "i.MX7 Dual support"
 	select PINCTRL_IMX7D
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@ -83,6 +83,7 @@ endif
 obj-$(CONFIG_SOC_IMX6Q) += mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += mach-imx6sl.o
 obj-$(CONFIG_SOC_IMX6SX) += mach-imx6sx.o
+obj-$(CONFIG_SOC_IMX6UL) += mach-imx6ul.o
 obj-$(CONFIG_SOC_IMX7D) += mach-imx7d.o

 ifeq ($(CONFIG_SUSPEND),y)
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@ -130,6 +130,9 @@ struct device * __init imx_soc_device_init(void)
 	case MXC_CPU_IMX6Q:
 		soc_id = "i.MX6Q";
 		break;
+	case MXC_CPU_IMX6UL:
+		soc_id = "i.MX6UL";
+		break;
 	case MXC_CPU_IMX7D:
 		soc_id = "i.MX7D";
 		break;
--- a/Show more
+++ b/Show more
				`@ -0,0 +1 @@`
				`See Documentation/devicetree/bindings/crypto/fsl-sec4.txt`