soc: Move brcmstb to bcm/brcmstb

Unify the different Broadcom SoCs directory and have everybody live
under drivers/soc/bcm/*.

Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

drivers/soc/Kconfig

@@ -1,7 +1,6 @@
 menu "SOC (System On Chip) specific Drivers"
 
 source "drivers/soc/bcm/Kconfig"
-source "drivers/soc/brcmstb/Kconfig"
 source "drivers/soc/fsl/qe/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"

drivers/soc/Makefile

@@ -3,7 +3,6 @@
 #
 
 obj-y				+= bcm/
-obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/
 obj-$(CONFIG_ARCH_DOVE)		+= dove/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
 obj-y				+= fsl/

drivers/soc/bcm/Kconfig

@@ -1,3 +1,5 @@
+menu "Broadcom SoC drivers"
+
 config RASPBERRYPI_POWER
 	bool "Raspberry Pi power domain driver"
 	depends on ARCH_BCM2835 || COMPILE_TEST
@@ -7,3 +9,16 @@ config RASPBERRYPI_POWER
 	help
 	  This enables support for the RPi power domains which can be enabled
 	  or disabled via the RPi firmware.
+
+config SOC_BRCMSTB
+	bool "Broadcom STB SoC drivers"
+	depends on ARM
+	select SOC_BUS
+	help
+	  Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
+	  This option alone enables only some support code, while the drivers
+	  can be enabled individually within this menu.
+
+	  If unsure, say N.
+
+endmenu

drivers/soc/bcm/Makefile

@@ -1 +1,2 @@
 obj-$(CONFIG_RASPBERRYPI_POWER)	+= raspberrypi-power.o
+obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/

drivers/soc/bcm/brcmstb/Makefile

@@ -0,0 +1 @@
+obj-y				+= common.o biuctrl.o

drivers/soc/bcm/brcmstb/biuctrl.c

@@ -0,0 +1,116 @@
+/*
+ * Broadcom STB SoCs Bus Unit Interface controls
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)	"brcmstb: " KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#define CPU_CREDIT_REG_OFFSET			0x184
+#define  CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK	0x70000000
+
+static void __iomem *cpubiuctrl_base;
+static bool mcp_wr_pairing_en;
+
+static int __init mcp_write_pairing_set(void)
+{
+	u32 creds = 0;
+
+	if (!cpubiuctrl_base)
+		return -1;
+
+	creds = readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+	if (mcp_wr_pairing_en) {
+		pr_info("MCP: Enabling write pairing\n");
+		writel_relaxed(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+			     cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+	} else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) {
+		pr_info("MCP: Disabling write pairing\n");
+		writel_relaxed(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
+				cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+	} else {
+		pr_info("MCP: Write pairing already disabled\n");
+	}
+
+	return 0;
+}
+
+static int __init setup_hifcpubiuctrl_regs(void)
+{
+	struct device_node *np;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+	if (!np) {
+		pr_err("missing BIU control node\n");
+		return -ENODEV;
+	}
+
+	cpubiuctrl_base = of_iomap(np, 0);
+	if (!cpubiuctrl_base) {
+		pr_err("failed to remap BIU control base\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");
+out:
+	of_node_put(np);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static u32 cpu_credit_reg_dump;  /* for save/restore */
+
+static int brcmstb_cpu_credit_reg_suspend(void)
+{
+	if (cpubiuctrl_base)
+		cpu_credit_reg_dump =
+			readl_relaxed(cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+	return 0;
+}
+
+static void brcmstb_cpu_credit_reg_resume(void)
+{
+	if (cpubiuctrl_base)
+		writel_relaxed(cpu_credit_reg_dump,
+				cpubiuctrl_base + CPU_CREDIT_REG_OFFSET);
+}
+
+static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
+	.suspend = brcmstb_cpu_credit_reg_suspend,
+	.resume = brcmstb_cpu_credit_reg_resume,
+};
+#endif
+
+
+void __init brcmstb_biuctrl_init(void)
+{
+	int ret;
+
+	setup_hifcpubiuctrl_regs();
+
+	ret = mcp_write_pairing_set();
+	if (ret) {
+		pr_err("MCP: Unable to disable write pairing!\n");
+		return;
+	}
+
+#ifdef CONFIG_PM_SLEEP
+	register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
+#endif
+}

drivers/soc/bcm/brcmstb/common.c

@@ -0,0 +1,99 @@
+/*
+ * Copyright © 2014 NVIDIA Corporation
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/soc/brcmstb/brcmstb.h>
+#include <linux/sys_soc.h>
+
+#include <soc/brcmstb/common.h>
+
+static u32 family_id;
+static u32 product_id;
+
+static const struct of_device_id brcmstb_machine_match[] = {
+	{ .compatible = "brcm,brcmstb", },
+	{ }
+};
+
+bool soc_is_brcmstb(void)
+{
+	struct device_node *root;
+
+	root = of_find_node_by_path("/");
+	if (!root)
+		return false;
+
+	return of_match_node(brcmstb_machine_match, root) != NULL;
+}
+
+static const struct of_device_id sun_top_ctrl_match[] = {
+	{ .compatible = "brcm,brcmstb-sun-top-ctrl", },
+	{ }
+};
+
+static int __init brcmstb_soc_device_init(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct device_node *sun_top_ctrl;
+	void __iomem *sun_top_ctrl_base;
+	int ret = 0;
+
+	sun_top_ctrl = of_find_matching_node(NULL, sun_top_ctrl_match);
+	if (!sun_top_ctrl)
+		return -ENODEV;
+
+	sun_top_ctrl_base = of_iomap(sun_top_ctrl, 0);
+	if (!sun_top_ctrl_base)
+		return -ENODEV;
+
+	family_id = readl(sun_top_ctrl_base);
+	product_id = readl(sun_top_ctrl_base + 0x4);
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	soc_dev_attr->family = kasprintf(GFP_KERNEL, "%x",
+					 family_id >> 28 ?
+					 family_id >> 16 : family_id >> 8);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "%x",
+					 product_id >> 28 ?
+					 product_id >> 16 : product_id >> 8);
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c%d",
+					 ((product_id & 0xf0) >> 4) + 'A',
+					   product_id & 0xf);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->family);
+		kfree(soc_dev_attr->soc_id);
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	return 0;
+
+out:
+	iounmap(sun_top_ctrl_base);
+	return ret;
+}
+arch_initcall(brcmstb_soc_device_init);

drivers/soc/brcmstb/Kconfig

@@ -1,10 +0,0 @@
-menuconfig SOC_BRCMSTB
-	bool "Broadcom STB SoC drivers"
-	depends on ARM
-	select SOC_BUS
-	help
-	  Enables drivers for the Broadcom Set-Top Box (STB) series of chips.
-	  This option alone enables only some support code, while the drivers
-	  can be enabled individually within this menu.
-
-	  If unsure, say N.