Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc update from Benjamin Herrenschmidt: "The main highlight is probably some base POWER8 support. There's more to come such as transactional memory support but that will wait for the next one. Overall it's pretty quiet, or rather I've been pretty poor at picking things up from patchwork and reviewing them this time around and Kumar no better on the FSL side it seems..." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (73 commits) powerpc+of: Rename and fix OF reconfig notifier error inject module powerpc: mpc5200: Add a3m071 board support powerpc/512x: don't compile any platform DIU code if the DIU is not enabled powerpc/mpc52xx: use module_platform_driver macro powerpc+of: Export of_reconfig_notifier_[register,unregister] powerpc/dma/raidengine: add raidengine device powerpc/iommu/fsl: Add PAMU bypass enable register to ccsr_guts struct powerpc/mpc85xx: Change spin table to cached memory powerpc/fsl-pci: Add PCI controller ATMU PM support powerpc/86xx: fsl_pcibios_fixup_bus requires CONFIG_PCI drivers/virt: the Freescale hypervisor driver doesn't need to check MSR[GS] powerpc/85xx: p1022ds: Use NULL instead of 0 for pointers powerpc: Disable relocation on exceptions when kexecing powerpc: Enable relocation on during exceptions at boot powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function powerpc: Add wrappers to enable/disable relocation on exceptions powerpc: Add set_mode hcall powerpc: Setup relocation on exceptions for bare metal systems powerpc: Move initial mfspr LPCR out of __init_LPCR powerpc: Add relocation on exception vector handlers ...
2026-10-18 21:58:11 +07:00 · 2012-12-18 09:58:09 -08:00 · 2012-12-18 09:58:09 -08:00 · 16e024f30c
commit 16e024f30c
parent c36e0501ee 376bddd344
116 changed files with 1545 additions and 839 deletions
--- a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
@ -0,0 +1,81 @@
+* Freescale 85xx RAID Engine nodes
+
+RAID Engine nodes are defined to describe on-chip RAID accelerators.  Each RAID
+Engine should have a separate node.
+
+Supported chips:
+P5020, P5040
+
+Required properties:
+
+- compatible:	Should contain "fsl,raideng-v1.0" as the value
+		This identifies RAID Engine block. 1 in 1.0 represents
+		major number whereas 0 represents minor number. The
+		version matches the hardware IP version.
+- reg:		offset and length of the register set for the device
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng: raideng@320000 {
+		compatible = "fsl,raideng-v1.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg	= <0x320000 0x10000>;
+		ranges	= <0 0x320000 0x10000>;
+	};
+
+
+There must be a sub-node for each job queue present in RAID Engine
+This node must be a sub-node of the main RAID Engine node
+
+- compatible:	Should contain "fsl,raideng-v1.0-job-queue" as the value
+		This identifies the job queue interface
+- reg:		offset and length of the register set for job queue
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+	};
+
+
+There must be a sub-node for each job ring present in RAID Engine
+This node must be a sub-node of job queue node
+
+- compatible:	Must contain "fsl,raideng-v1.0-job-ring" as the value
+		This identifies job ring. Should contain either
+		"fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
+		depending upon whether ring has high or low priority
+- reg:		offset and length of the register set for job ring
+- interrupts:	interrupt mapping for job ring IRQ
+
+Optional property:
+
+- fsl,liodn:	Specifies the LIODN to be used for Job Ring. This
+		property is normally set by firmware. Value
+		is of 12-bits which is the LIODN number for this JR.
+		This property is used by the IOMMU (PAMU) to distinquish
+		transactions from this JR and than be able to do address
+		translation & protection accordingly.
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+
+		raideng_jr0: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg	   = <0x0 0x400>;
+			interrupts = <139 2 0 0>;
+			interrupt-parent = <&mpic>;
+			fsl,liodn = <0x41>;
+		};
+	};
--- a/Documentation/powerpc/ptrace.txt
+++ b/Documentation/powerpc/ptrace.txt
@ -127,6 +127,22 @@ Some examples of using the structure to:
  p.addr2           = (uint64_t) end_range;
  p.condition_value = 0;

+- set a watchpoint in server processors (BookS)
+
+  p.version         = 1;
+  p.trigger_type    = PPC_BREAKPOINT_TRIGGER_RW;
+  p.addr_mode       = PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE;
+  or
+  p.addr_mode       = PPC_BREAKPOINT_MODE_EXACT;
+
+  p.condition_mode  = PPC_BREAKPOINT_CONDITION_NONE;
+  p.addr            = (uint64_t) begin_range;
+  /* For PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE addr2 needs to be specified, where
+   * addr2 - addr <= 8 Bytes.
+   */
+  p.addr2           = (uint64_t) end_range;
+  p.condition_value = 0;
+
 3. PTRACE_DELHWDEBUG

 Takes an integer which identifies an existing breakpoint or watchpoint
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@ -240,7 +240,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
 		macaddr[4] = (val >> 8) & 0xff;
 		macaddr[5] = (val >> 0) & 0xff;

-		prom_update_property(np, newmac);
+		of_update_property(np, newmac);
 	}
 }

--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@ -181,7 +181,7 @@ $(BOOT_TARGETS2): vmlinux
 bootwrapper_install:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)

-%.dtb:
+%.dtb: scripts
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)

 define archhelp
--- a/arch/powerpc/boot/dts/a3m071.dts
+++ b/arch/powerpc/boot/dts/a3m071.dts
@ -0,0 +1,144 @@
+/*
+ * a3m071 board Device Tree Source
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+	model = "anonymous,a3m071";
+	compatible = "anonymous,a3m071";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		timer@600 {
+			fsl,has-wdt;
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb: usb@1000 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			status = "disabled";
+		};
+
+		psc@2400 {
+			status = "disabled";
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@3 {
+				reg = <0x03>;
+			};
+		};
+
+		ata@3a00 {
+			status = "disabled";
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			status = "disabled";
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x02000000
+			  3 0 0xe9000000 0x00080000
+			  5 0 0xe8000000 0x00010000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x0 0x02000000>;
+			compatible = "cfi-flash";
+			bank-width = <2>;
+			partition@0x0 {
+				label = "u-boot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@0x00040000 {
+				label = "env";
+				reg = <0x00040000 0x00020000>;
+			};
+			partition@0x00060000 {
+				label = "dtb";
+				reg = <0x00060000 0x00020000>;
+			};
+			partition@0x00080000 {
+				label = "kernel";
+				reg = <0x00080000 0x00500000>;
+			};
+			partition@0x00580000 {
+				label = "root";
+				reg = <0x00580000 0x00A80000>;
+			};
+		};
+
+		fpga@3,0 {
+			compatible = "anonymous,a3m071-fpga";
+			reg = <3 0x0 0x00080000
+			       5 0x0 0x00010000>;
+			interrupts = <0 0 3>;  /* level low */
+		};
+	};
+
+	pci@f0000d00 {
+		status = "disabled";
+	};
+};
--- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi
@ -354,4 +354,5 @@
 /include/ "qoriq-sata2-0.dtsi"
 /include/ "qoriq-sata2-1.dtsi"
 /include/ "qoriq-sec4.2-0.dtsi"
+/include/ "qoriq-raid1.0-0.dtsi"
 };
--- a/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p5020si-pre.dtsi
@ -73,6 +73,12 @@
 		rtic_c = &rtic_c;
 		rtic_d = &rtic_d;
 		sec_mon = &sec_mon;
+
+		raideng = &raideng;
+		raideng_jr0 = &raideng_jr0;
+		raideng_jr1 = &raideng_jr1;
+		raideng_jr2 = &raideng_jr2;
+		raideng_jr3 = &raideng_jr3;
 	};

 	cpus {
--- a/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
+++ b/arch/powerpc/boot/dts/fsl/qoriq-raid1.0-0.dtsi
@ -0,0 +1,85 @@
+/*
+ * QorIQ RAID 1.0 device tree stub [ controller @ offset 0x320000 ]
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+raideng: raideng@320000 {
+	compatible = "fsl,raideng-v1.0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	reg = <0x320000 0x10000>;
+	ranges = <0 0x320000 0x10000>;
+
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x1000 0x1000>;
+		ranges = <0x0 0x1000 0x1000>;
+
+		raideng_jr0: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg = <0x0 0x400>;
+			interrupts = <139 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		raideng_jr1: jr@400 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+			reg = <0x400 0x400>;
+			interrupts = <140 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	raideng_jq1@2000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2000 0x1000>;
+		ranges = <0x0 0x2000 0x1000>;
+
+		raideng_jr2: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg = <0x0 0x400>;
+			interrupts = <141 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		raideng_jr3: jr@400 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-lp-ring";
+			reg = <0x400 0x400>;
+			interrupts = <142 2 0 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+};
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@ -2,7 +2,7 @@ CONFIG_PPC64=y
 CONFIG_ALTIVEC=y
 CONFIG_VSX=y
 CONFIG_SMP=y
-CONFIG_NR_CPUS=1024
+CONFIG_NR_CPUS=2048
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@ -52,8 +52,6 @@
 #define smp_mb__before_clear_bit()	smp_mb()
 #define smp_mb__after_clear_bit()	smp_mb()

-#define BITOP_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
-#define BITOP_WORD(nr)		((nr) / BITS_PER_LONG)
 #define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)

 /* Macro for generating the ***_bits() functions */
@ -83,22 +81,22 @@ DEFINE_BITOP(change_bits, xor, "", "")

 static __inline__ void set_bit(int nr, volatile unsigned long *addr)
 {
-	set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+	set_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
 }

 static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
 {
-	clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+	clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
 }

 static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
 {
-	clear_bits_unlock(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+	clear_bits_unlock(BIT_MASK(nr), addr + BIT_WORD(nr));
 }

 static __inline__ void change_bit(int nr, volatile unsigned long *addr)
 {
-	change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr));
+	change_bits(BIT_MASK(nr), addr + BIT_WORD(nr));
 }

 /* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output
@ -136,26 +134,26 @@ DEFINE_TESTOP(test_and_change_bits, xor, PPC_ATOMIC_ENTRY_BARRIER,
 static __inline__ int test_and_set_bit(unsigned long nr,
 				       volatile unsigned long *addr)
 {
-	return test_and_set_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
+	return test_and_set_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
 }

 static __inline__ int test_and_set_bit_lock(unsigned long nr,
 				       volatile unsigned long *addr)
 {
-	return test_and_set_bits_lock(BITOP_MASK(nr),
-				addr + BITOP_WORD(nr)) != 0;
+	return test_and_set_bits_lock(BIT_MASK(nr),
+				addr + BIT_WORD(nr)) != 0;
 }

 static __inline__ int test_and_clear_bit(unsigned long nr,
 					 volatile unsigned long *addr)
 {
-	return test_and_clear_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
+	return test_and_clear_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
 }

 static __inline__ int test_and_change_bit(unsigned long nr,
 					  volatile unsigned long *addr)
 {
-	return test_and_change_bits(BITOP_MASK(nr), addr + BITOP_WORD(nr)) != 0;
+	return test_and_change_bits(BIT_MASK(nr), addr + BIT_WORD(nr)) != 0;
 }

 #include <asm-generic/bitops/non-atomic.h>
@ -280,61 +278,8 @@ unsigned long __arch_hweight64(__u64 w);
 #include <asm-generic/bitops/find.h>

 /* Little-endian versions */
+#include <asm-generic/bitops/le.h>

-static __inline__ int test_bit_le(unsigned long nr,
-				  __const__ void *addr)
-{
-	__const__ unsigned char	*tmp = (__const__ unsigned char *) addr;
-	return (tmp[nr >> 3] >> (nr & 7)) & 1;
-}
-
-static inline void set_bit_le(int nr, void *addr)
-{
-	set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline void clear_bit_le(int nr, void *addr)
-{
-	clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline void __set_bit_le(int nr, void *addr)
-{
-	__set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline void __clear_bit_le(int nr, void *addr)
-{
-	__clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int test_and_set_bit_le(int nr, void *addr)
-{
-	return test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int test_and_clear_bit_le(int nr, void *addr)
-{
-	return test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int __test_and_set_bit_le(int nr, void *addr)
-{
-	return __test_and_set_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-static inline int __test_and_clear_bit_le(int nr, void *addr)
-{
-	return __test_and_clear_bit(nr ^ BITOP_LE_SWIZZLE, addr);
-}
-
-#define find_first_zero_bit_le(addr, size) \
-	find_next_zero_bit_le((addr), (size), 0)
-unsigned long find_next_zero_bit_le(const void *addr,
-				    unsigned long size, unsigned long offset);
-
-unsigned long find_next_bit_le(const void *addr,
-				    unsigned long size, unsigned long offset);
 /* Bitmap functions for the ext2 filesystem */

 #include <asm-generic/bitops/ext2-atomic-setbit.h>
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@ -401,6 +401,14 @@ extern const char *powerpc_base_platform;
 	    CPU_FTR_DSCR | CPU_FTR_SAO  | CPU_FTR_ASYM_SMT | \
 	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
 	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
+#define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR | CPU_FTR_SAO  | \
+	    CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
+	    CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY)
 #define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
 	    CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@ -421,8 +429,8 @@ extern const char *powerpc_base_platform;
 #define CPU_FTRS_POSSIBLE	\
 	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
 	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
-	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
-	    CPU_FTR_VSX)
+	    CPU_FTRS_POWER7 | CPU_FTRS_POWER8 | CPU_FTRS_CELL |		\
+	    CPU_FTRS_PA6T | CPU_FTR_VSX)
 #endif
 #else
 enum {
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semicondutor, Inc.
+ * Copyright 2009 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@ -48,6 +48,35 @@
 #define EX_LR		72
 #define EX_CFAR		80

+#ifdef CONFIG_RELOCATABLE
+#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
+	ld	r12,PACAKBASE(r13);	/* get high part of &label */	\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
+	LOAD_HANDLER(r12,label);					\
+	mtlr	r12;							\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	li	r10,MSR_RI;						\
+	mtmsrd 	r10,1;			/* Set RI (EE=0) */		\
+	blr;
+#else
+/* If not relocatable, we can jump directly -- and save messing with LR */
+#define EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)			\
+	mfspr	r11,SPRN_##h##SRR0;	/* save SRR0 */			\
+	mfspr	r12,SPRN_##h##SRR1;	/* and SRR1 */			\
+	li	r10,MSR_RI;						\
+	mtmsrd 	r10,1;			/* Set RI (EE=0) */		\
+	b	label;
+#endif
+
+/*
+ * As EXCEPTION_PROLOG_PSERIES(), except we've already got relocation on
+ * so no need to rfid.  Save lr in case we're CONFIG_RELOCATABLE, in which
+ * case EXCEPTION_RELON_PROLOG_PSERIES_1 will be using lr.
+ */
+#define EXCEPTION_RELON_PROLOG_PSERIES(area, label, h, extra, vec)	\
+	EXCEPTION_PROLOG_1(area, extra, vec);				\
+	EXCEPTION_RELON_PROLOG_PSERIES_1(label, h)
+
 /*
 * We're short on space and time in the exception prolog, so we can't
 * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
@ -55,12 +84,29 @@
 * word.
 */
 #define LOAD_HANDLER(reg, label)					\
-	addi	reg,reg,(label)-_stext;	/* virt addr of handler ... */
+	/* Handlers must be within 64K of kbase, which must be 64k aligned */ \
+	ori	reg,reg,(label)-_stext;	/* virt addr of handler ... */

 /* Exception register prefixes */
 #define EXC_HV	H
 #define EXC_STD

+#if defined(CONFIG_RELOCATABLE)
+/*
+ * If we support interrupts with relocation on AND we're a relocatable
+ * kernel, we need to use LR to get to the 2nd level handler.  So, save/restore
+ * it when required.
+ */
+#define SAVE_LR(reg, area)	mflr	reg ; 	std	reg,area+EX_LR(r13)
+#define GET_LR(reg, area) 			ld	reg,area+EX_LR(r13)
+#define RESTORE_LR(reg, area)	ld	reg,area+EX_LR(r13) ; mtlr reg
+#else
+/* ...else LR is unused and in register. */
+#define SAVE_LR(reg, area)
+#define GET_LR(reg, area) 	mflr	reg
+#define RESTORE_LR(reg, area)
+#endif
+
 #define __EXCEPTION_PROLOG_1(area, extra, vec)				\
 	GET_PACA(r13);							\
 	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
@ -69,6 +115,7 @@
 	mfspr	r10,SPRN_CFAR;						\
 	std	r10,area+EX_CFAR(r13);					\
 	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		\
+	SAVE_LR(r10, area);						\
 	mfcr	r9;							\
 	extra(vec);							\
 	std	r11,area+EX_R11(r13);					\
@ -169,6 +216,7 @@ do_kvm_##n:								\
 	sth	r1,PACA_TRAP_SAVE(r13);					   \
 	std	r3,area+EX_R3(r13);					   \
 	addi	r3,r13,area;		/* r3 -> where regs are saved*/	   \
+	RESTORE_LR(r1, area);						   \
 	b	bad_stack;						   \
 3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
 	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
@ -194,8 +242,8 @@ do_kvm_##n:								\
 	ld	r10,area+EX_CFAR(r13);					   \
 	std	r10,ORIG_GPR3(r1);					   \
 	END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66);		   \
+	GET_LR(r9,area);		/* Get LR, later save to stack	*/ \
 	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
-	mflr	r9;			/* save LR in stackframe	*/ \
 	std	r9,_LINK(r1);						   \
 	mfctr	r10;			/* save CTR in stackframe	*/ \
 	std	r10,_CTR(r1);						   \
@ -232,6 +280,26 @@ label##_hv:						\
 	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common,	\
 				 EXC_HV, KVMTEST, vec)

+#define STD_RELON_EXCEPTION_PSERIES(loc, vec, label)	\
+	. = loc;					\
+	.globl label##_relon_pSeries;			\
+label##_relon_pSeries:					\
+	HMT_MEDIUM;					\
+	/* No guest interrupts come through here */	\
+	SET_SCRATCH0(r13);		/* save r13 */	\
+	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
+				       EXC_STD, KVMTEST_PR, vec)
+
+#define STD_RELON_EXCEPTION_HV(loc, vec, label)		\
+	. = loc;					\
+	.globl label##_relon_hv;			\
+label##_relon_hv:					\
+	HMT_MEDIUM;					\
+	/* No guest interrupts come through here */	\
+	SET_SCRATCH0(r13);	/* save r13 */		\
+	EXCEPTION_RELON_PROLOG_PSERIES(PACA_EXGEN, label##_common, \
+				       EXC_HV, KVMTEST, vec)
+
 /* This associate vector numbers with bits in paca->irq_happened */
 #define SOFTEN_VALUE_0x500	PACA_IRQ_EE
 #define SOFTEN_VALUE_0x502	PACA_IRQ_EE
@ -257,6 +325,9 @@ label##_hv:						\
 	KVMTEST(vec);							\
 	_SOFTEN_TEST(EXC_STD, vec)

+#define SOFTEN_NOTEST_PR(vec)		_SOFTEN_TEST(EXC_STD, vec)
+#define SOFTEN_NOTEST_HV(vec)		_SOFTEN_TEST(EXC_HV, vec)
+
 #define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra)		\
 	HMT_MEDIUM;							\
 	SET_SCRATCH0(r13);    /* save r13 */				\
@ -279,6 +350,28 @@ label##_hv:								\
 	_MASKABLE_EXCEPTION_PSERIES(vec, label,				\
 				    EXC_HV, SOFTEN_TEST_HV)

+#define __MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)	\
+	HMT_MEDIUM;							\
+	SET_SCRATCH0(r13);    /* save r13 */				\
+	__EXCEPTION_PROLOG_1(PACA_EXGEN, extra, vec);		\
+	EXCEPTION_RELON_PROLOG_PSERIES_1(label##_common, h);
+#define _MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)	\
+	__MASKABLE_RELON_EXCEPTION_PSERIES(vec, label, h, extra)
+
+#define MASKABLE_RELON_EXCEPTION_PSERIES(loc, vec, label)		\
+	. = loc;							\
+	.globl label##_relon_pSeries;					\
+label##_relon_pSeries:							\
+	_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label,			\
+					  EXC_STD, SOFTEN_NOTEST_PR)
+
+#define MASKABLE_RELON_EXCEPTION_HV(loc, vec, label)			\
+	. = loc;							\
+	.globl label##_relon_hv;					\
+label##_relon_hv:							\
+	_MASKABLE_RELON_EXCEPTION_PSERIES(vec, label,			\
+					  EXC_HV, SOFTEN_NOTEST_HV)
+
 /*
 * Our exception common code can be passed various "additions"
 * to specify the behaviour of interrupts, whether to kick the
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@ -49,6 +49,7 @@
 #define FW_FEATURE_XCMO		ASM_CONST(0x0000000008000000)
 #define FW_FEATURE_OPAL		ASM_CONST(0x0000000010000000)
 #define FW_FEATURE_OPALv2	ASM_CONST(0x0000000020000000)
+#define FW_FEATURE_SET_MODE	ASM_CONST(0x0000000040000000)

 #ifndef __ASSEMBLY__

@ -62,7 +63,8 @@ enum {
 		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
 		FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
 		FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
-		FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO,
+		FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO |
+		FW_FEATURE_SET_MODE,
 	FW_FEATURE_PSERIES_ALWAYS = 0,
 	FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2,
 	FW_FEATURE_POWERNV_ALWAYS = 0,
--- a/arch/powerpc/include/asm/fsl_gtm.h
+++ b/arch/powerpc/include/asm/fsl_gtm.h
@ -1,7 +1,7 @@
 /*
 * Freescale General-purpose Timers Module
 *
- * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ * Copyright 2006 Freescale Semiconductor, Inc.
 *               Shlomi Gridish <gridish@freescale.com>
 *               Jerry Huang <Chang-Ming.Huang@freescale.com>
 * Copyright (c) MontaVista Software, Inc. 2008.
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@ -71,7 +71,9 @@ struct ccsr_guts {
 	u8	res0c4[0x224 - 0xc4];
 	__be32  iodelay1;	/* 0x.0224 - IO delay control register 1 */
 	__be32  iodelay2;	/* 0x.0228 - IO delay control register 2 */
-	u8	res22c[0x800 - 0x22c];
+	u8	res22c[0x604 - 0x22c];
+	__be32	pamubypenr; 	/* 0x.604 - PAMU bypass enable register */
+	u8	res608[0x800 - 0x608];
 	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
 	u8	res804[0x900 - 0x804];
 	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@ -267,7 +267,8 @@
 #define H_RANDOM		0x300
 #define H_COP			0x304
 #define H_GET_MPP_X		0x314
-#define MAX_HCALL_OPCODE	H_GET_MPP_X
+#define H_SET_MODE		0x31C
+#define MAX_HCALL_OPCODE	H_SET_MODE

 #ifndef __ASSEMBLY__

@ -355,6 +356,26 @@ struct hvcall_mpp_x_data {

 int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data);

+static inline unsigned int get_longbusy_msecs(int longbusy_rc)
+{
+	switch (longbusy_rc) {
+	case H_LONG_BUSY_ORDER_1_MSEC:
+		return 1;
+	case H_LONG_BUSY_ORDER_10_MSEC:
+		return 10;
+	case H_LONG_BUSY_ORDER_100_MSEC:
+		return 100;
+	case H_LONG_BUSY_ORDER_1_SEC:
+		return 1000;
+	case H_LONG_BUSY_ORDER_10_SEC:
+		return 10000;
+	case H_LONG_BUSY_ORDER_100_SEC:
+		return 100000;
+	default:
+		return 1;
+	}
+}
+
 #ifdef CONFIG_PPC_PSERIES
 extern int CMO_PrPSP;
 extern int CMO_SecPSP;
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@ -3,7 +3,7 @@
 * The Internal Memory Map for devices with QE on them. This
 * is the superset of all QE devices (8360, etc.).

- * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ * Copyright (C) 2006. Freescale Semiconductor, Inc. All rights reserved.
 *
 * Authors: 	Shlomi Gridish <gridish@freescale.com>
 * 		Li Yang <leoli@freescale.com>
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@ -166,9 +166,6 @@ struct machdep_calls {
 						unsigned long size,
 						pgprot_t vma_prot);

-	/* Idle loop for this platform, leave empty for default idle loop */
-	void		(*idle_loop)(void);
-
 	/*
 	 * Function for waiting for work with reduced power in idle loop;
 	 * called with interrupts disabled.
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@ -101,6 +101,7 @@
 #define MMU_FTRS_POWER5		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_POWER6		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_POWER7		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
+#define MMU_FTRS_POWER8		MMU_FTRS_POWER4 | MMU_FTR_LOCKLESS_TLBIE
 #define MMU_FTRS_CELL		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
 				MMU_FTR_CI_LARGE_PAGE
 #define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
--- a/Show more
+++ b/Show more