Per API review, change the use of FileDescriptor to
ParcelFileDescriptor.
This change also fix nullability according to API review
feedbacks.
Fix: 126698610
Fix: 126699425
Fix: 126699232
Fix: 126700278
Test: 1. m -j
2. atest FrameworksNetTests --generate-new-metrics 50
3. m -j doc-comment-check-docs
Change-Id: I19476c50dd1ca290bf3f41973829da2bd229796a
network.
This is to establish a baseline for the existing behavior, and to ensure
that following changes are not causing a regression in existing
behavior.
This CL is also adding missing cleanup for NetworkStatsCollectionTest
which was forcing all network types in NetworkTemplate that was causing
NetworkStatsService related tests to fail.
Bug: 113122541
Bug: 120145746
Test: atest FrameworksNetTests
Change-Id: I285f186cfb16bc9fa704c797996b1e4f8a73dee4
With the @JavaOnlyStableParcelable annotation, Network can now be used
as-is as a framework parcelable.
Test: atest FrameworksNetTests NetworkStackTests
Bug: 126477266
Change-Id: I5d9695a31b3ac48d10edcf08ccd0c34375353b79
Currently, client side of keepalive event handling rely on a
newly created thread, looper, messenger and handler per object.
However, by creating oneway AIDL interface with the executor,
the callbacks can be invoked on the binder thread with user
specified context, which not only greatly simplify the design
but also reduce the cost of current thread modeling.
Bug: 114151147
Bug: 123969871
Test: 1. atest FrameworksNetTests --generate-new-metric 10
2. atest-deflake.sh
Change-Id: I27504074cd28d5b5eb94a7ec0e97ebaaaaa1ae3d
This is a cherry-pick of ag/607226 that has been rebased on
top of four years of changes and with comments addressed.
Gives each factory a serial number and propagates it to every
NetworkAgent so when a score comes back indicating a request is
being handled the factory can account for it properly.
Without this, a new request that's already handled by a network
offered by a factory will not cause an increment of the factorys
ref count. Concretely this results in issues like the RAT icon
not being displayed in spite of the network actually being up
and usable.
This will be ported to AOSP as soon as possible, but immediately
some master-only WiFi tests need to be adjusted with this change
which would not let me submit to AOSP.
Bug: 18637384
Bug: 29030667
Test: manual
Test: atest frameworks/opt/telephony/tests/telephonytests
Test: atest frameworks-net
Test: atest CtsNetTestCases CtsHostsideNetworkTests
Change-Id: I597ac588f76dd507512ff02868fd1310b7e63f7e
Merged-In: I597ac588f76dd507512ff02868fd1310b7e63f7e
In some networks, network validation may only get success
result for http probe but fail result for https probe.
For this kind of network, it may still work at some websites
or apps, but user didn't know about that. In order to fix this
issue, we will check if network has partial connectivity and
notify user to make a choice if they want to use this partial
connectivity or not.
Bug: 113450764
Test: 1. Build pass.
2. Fake partial connectivity case for testing.
3. atest FrameworksNetTests
4. atest NetworkStackTests
Change-Id: I69ed00ac4850904ff708c9fef22e148879a10e92
lucaslinauthored and Lucas Lincommited 2019-03-12 07:37:33 +00:00
Add a mechanism by which a factory can declare "instant failure" for
a request - which would result in it getting an OnUnavailable()
(even without a timeout).
Factories may only do this iff:
1. They know they are the only factory which may fulfill this
request (common for transport-specific requests).
2. The know that the request can definitely not be
fulfilled at any point in the future.
Bug: 31382922
Test: atest ConnectivityServiceTest
Merged-In: I9bce0f4d85fa8cad7f8a9998819f945b778c5ac5
Change-Id: I9bce0f4d85fa8cad7f8a9998819f945b778c5ac5
NSS needed it for getting VpnInfo[], NetworkState[] and
activeLinkProperties which it used to query via ConnectivityManager.
For VpnInfo[], this was racy as NSS may ignore intermediate changes to a
VPN's underlying networks. See http://b/123961098 for more context.
It may also lead to deadlocks b/w ConnectivityService and
NetworkStatsService. See http://b/126245192 for more info.
This change will ensure that NSS is never contending on any of
ConnectivityService locks.
Bug: 123961098
Bug: 126245192
Bug: 120145746
Test: atest FrameworksNetTests
Change-Id: Id1da446b54d95ee68ed14079107b1a10318bcf8b
Merged-In: I57e117bb4e9efe491b19d6b5a479f2d58d1c58e6
NSS needed it for getting VpnInfo[], NetworkState[] and
activeLinkProperties which it used to query via ConnectivityManager.
For VpnInfo[], this was racy as NSS may ignore intermediate changes to a
VPN's underlying networks. See http://b/123961098 for more context.
It may also lead to deadlocks b/w ConnectivityService and
NetworkStatsService. See http://b/126245192 for more info.
This change will ensure that NSS is never contending on any of
ConnectivityService locks.
Bug: 123961098
Bug: 126245192
Bug: 120145746
Test: atest FrameworksNetTests
Change-Id: I57e117bb4e9efe491b19d6b5a479f2d58d1c58e6
This change is basically a revert of http://ag/3580901.
It was made because previously VPN capabilities did not use to update
based on its underlying networks. That is no longer the case anymore.
This was previously returning meteredness on the basis of VPN's first
underlying network which is incorrect in cases such as VPN using
multiple underlying networks, or VPN that has explicitly marked itself
as metered via VpnService.Builder#setMetered API.
Bug: 123936838
Test: atest FrameworksNetTests
Change-Id: Ia54b8570fbad4a638a6d43a95e0271c6baf66685
* changes:
Catch ServiceSpecificException instead of IllegalStateException.
Manage NAT64 prefix discovery lifecycle in the framework.
Track NAT64 in the framework and start clatd iff NAT64 detected
Change Nat464Xlat lifecycle.
Minor improvements to verifyTcpBufferSizeChange.
Lorenzo Colittiauthored and Gerrit Code Reviewcommited 2019-02-27 23:37:42 +00:00
Currently NAT64 prefix discovery, which runs in netd, is started
by netd itself when a network is programmed with all-IPv6 DNS
servers. Unfortunately this is not correct because in many cases
we program DNS servers before the network is connected and it's
actually possible to send packets to them.
In general netd does not have enough visibility into network
lifecycle management to decide when to start and stop prefix
discovery. So move it into the framework with the rest of the
464xlat control plane.
Bug: 65674744
Test: atest FrameworksNetTests
Change-Id: I8fa051a9c216d9c05082bf7d0bbb0cbd56000162
Lorenzo Colitticommited 2019-02-27 00:18:13 +09:00
Currently, both netd and clatd do NAT64 prefix detection, and we
start clatd on all IPv6-only networks regardless of whether netd
has detected a NAT64 prefix or not.
Instead, track the NAT64 prefix in the framework, and only start
clatd if the prefix is detected. This will allow us to remove
DNS64 detection in clatd, and pass the NAT64 prefix and the IPv6
address to clatd on the command line instead of clatd finding it
itself. That way, netd and the framework will always know how
464xlat is configured, and we'll be able to use that information
in netd.
Test: builds, boots
Test: atest FrameworksNetTests
Change-Id: Ida32d5760c5aecf7aeebef08fdb596291b2ce14a
Lorenzo Colitticommited 2019-02-25 11:42:00 +09:00
Currently, NetworkAgentInfo keeps a Nat464Xlat object only on
networks where we're starting clatd (i.e., IPv6-only networks).
Simplify this code by making the Nat464Xlat object final and
always non-null. This allows us to use Nat464Xlat to store
information, such as the NAT64 prefix, even if the clat daemon
has not been started yet.
Also, remove the STOPPING state which waits for the interface to
be removed. Instead, when stop() is called, immediately enter the
IDLE state.
- This is necessary in order to be able to call start() again
before the interface removal notification has arrived.
- It's also arguably more correct than the current code,
because when stop() returns clatd has already terminated
(ClatdController::stopClatd calls waitpid), and thus the tun
fd is already closed and the tun interface is gone.
Also, now that Nat464Xlat objects are reused after stop(), add
test coverage for calling start() after stop, in both cases:
- The notification that the previous interface was removed
arrives before the second start().
- The notification that the previous interface was removed
arrives after the second start() but before the notification
that the second interface was added.
Also fix a couple of lint warnings.
Test: builds, boots
Test: atest FrameworksNetTests
Test: clatd stops when IPv4 address added
Test: clatd restarts after "adb shell killall clatd"
Change-Id: I3dc66d155aa27606681f3473daf2170434d8c6d0
Lorenzo Colitticommited 2019-02-25 11:42:00 +09:00
1. Remove "throws Exception" from the signature so it can be used
in tests that do not already throw Exception.
2. Update comment to reflect the fact that TCP buffer sizes are
set on default network switch, not on connect.
3. Move into the method a class-level static constant that is
only used in that method.
Test: atest ConnectivityServiceTest
Change-Id: Ic2e4fbedc23065efc20e45ea84996b577a8e94b6
Lorenzo Colitticommited 2019-02-25 11:41:50 +09:00
Bug: 122652441
Test: atest com.android.server.connectivity.VpnTest
Test: Establish a IPv4 VPN with minimal routes and check
(dumpsys connectivity) the VPN network does not have INTERNET
capability.
Change-Id: Ic7f19ebb7b7f78a6ffb2a8ec3fc3eca5e5421f57
Junyu Lai
authored and
android-build-merger
commited 
lucaslin
authored and
Treehugger Robot
authored and
Gerrit Code Review
commited 
Luke Huang
authored and
Varun Anand
authored and
Remi NGUYEN VAN
authored and
Ian Kasprzak
authored and
Xiao Ma
authored and
Chalard Jean
authored and
Lorenzo Colitti
commited 
Etan Cohen
commited 
Brett Chabot
authored and
Android (Google) Code Review
commited 
Rubin Xu
authored and