Currently the captive portal check URL is generated by
concatenating scheme, "://", IP address, and port. This breaks
for IPv6 because IPv6 addresses in URLs must be enclosed in
square brackets (e.g., http://2001:db8::1/generate_204 is
invalid; should he http://[2001:db8::1]/generate_204 instead).
The resulting MalformedURLException causes isMobileOk to report
that there is no captive portal, even if there is one.
Fortunately the three-arg URL constructor already knows how to
construct URLs with IPv6 addresses. Use that instead of
generating the URL ourselves.
Bug: 10801896
Change-Id: I02605ef62f493a34f25bb405ef02b111543a76fd
Lorenzo Colitticommited 2013-10-08 14:15:14 +09:00
There are two bugs one is I was clearing the notification in
CaptivePortalTracker when entering the ActivateState. (double check
according to bug 5021626 we should be calling enter)
Second is we could have the need to display both icons but can't
because we only allow one.
The solution I'm proposing here is to allow two notifications and
have then controlled separately.
Bug: 10886908
Change-Id: I30e7130bc542535492d175640a4990c592f32806
Add the condition that the connected network needs to be TYPE_MOBILE.
This eliminates checking on connecting to secondary networks like
FOTA, MMS, SUPL ...
This reduces unnecessary attempts to bring up multiple connections at
the same time. Especially in the light of the trouble we're having with HFA
on Sprint, where we don't want to connect to any other network until HFA
has completed.
Bug: 10758001
Change-Id: Id294536b70304a51de4752bc1a4ffac734f10f1a
In checkMobileProvisioning the call to mdst.isProvisioningNetwork() is
a blocking call and during monkey testing without SIM this is causing
ANR's. Move the initial test for provisioning into isMobileOk so
checkMobileProvisioning doesn't block.
If mobile is not supported return CMP_RESULT_NO_CONNECTION.
Cleaned up some debug.
Bug: 10674404
Change-Id: I10a0e922cd6ea9790f66e2083f37e68cb0a8861f
This changes the PAC support to not broadcast the Proxy information until
the Local Proxy has started up and successfully bound to a port so that
the local proxy information can be guaranteed to be owned by the proxy.
Bug: 10459877
Change-Id: I175cd3388c758c55e341115e4a8241884b90d633
netd now tracks statistics for tethered interfaces across tethering
sessions, so switch to asking for all tethering stats. (Currently
we're double-counting all tethering data, ever since it started
tracking across sessions.)
Also catch OOME to handle corrupt stats files, which we then dump to
DropBox and then start over.
Bug: 5868832, 9796109
Change-Id: I2eb2a1bf01b993dd198597d770fe0e022466c6b9
Added a hidden API under ConnectivityManager to toggle airplane mode.
This may be a temp solution for b/10653570.
bug:10653570
Change-Id: I0b2b42230073289eb8dc6891317d62b84e26c133
Able to config network specific MTU size. Normally, the default size of MTU is 1500.
US - ATT 1410, TMUS 1440, SPRINT 1422
KR - SKT 1440, KT 1450, LGU+ 1428
JP - KDDI 1420, SoftBank 1340
CA - RGS 1430, FIDO 1430, MTS 1430, BELL 1358, SaskTel 1358
AU - TEL 1400
Bug: 10195070
Change-Id: Ie18650b37a3d44af944f2dae4aa97c04fb12cd5e
sy.yunauthored and Robert Greenwaltcommited 2013-09-06 15:26:19 -07:00
- Require a non-204 response multiple times before declaring a
redirected error and hence a warm sim.
- If there is no connection or dns don't declare its a warm-sim.
- Add printing of the http headers to try to get more information
if we still get a false positive result.
Bug: 9972012
Change-Id: Ic115685cdbbe39c2b4de88b128eaf8d2ea96b45c
I'd changed DetailedState to force ConnectivityService to treat
provisioning apn's specially. In particular so that they wouldn't
be identified they were fully connected until the provisioning
actually started. The problem is that DetailedState is a public enum
that has a CTS test and just changing the CTS to allow for the new
state (CONNECTED_TO_PROVISIONING_NETWORK) was inappropriate.
Instead I've added a new mIsConnectedToProvisioningNetwork variable
and used the DetailedState.SUSPENDED as the intermediate state.
Bug: 10620248
Change-Id: Id4a842398cad67455541ce629959351c27d83639
This change renames the LinkInfo objects to LinkQuailtyInfo. The API is
still hidden; but it can be accessed via reflection.
Bug: 10342372
Change-Id: Ieccea87c467ceae5d7f76298b137573f67396cd6
When a sim is new or it has expired it needs to be provisioned
with the carrier. Basically provisioning is associating a sim with
a user account. When a sim isn't provisioned then operators will
restrict access to the network and only allow certain addresses
or services to be used.
This set of changes allows two types of provisioning networks to be
recognized. The first is a network that causes all DNS lookups to be
redirected to a different address than was intended. This is exemplified
by how T-Mobile works.
The second technique uses a special apn for provisioning. An example is
AT&T where lwaactivate is the provisioning apn and broadband is the
normal apn. We first try broadband and if we are unable to connect we
try lwaactivate. When we see the activate we identify it as special and
the ApnContext.isProvisioningApn will return true.
In the future our plan is to create a new network type that can be added
to the apn list, but for now it identified by name.
Here is a list of significant changes:
- CaptivePortalTracker now only test WiFi networks instead of all networks
- checkMobileProvisioning checks for provisioning networks and doesn't
try to ping.
- IConnectivityManager.aidl changes:
* getProvisioningOrActiveNetworkInfo was added to and used by Manage
mobile plan in WirelessSettings so even when there is no active
network it will still allow provisioning. Otherwise it would report
no internet connection.
* setSignInErrorNotificationVisible is used by both
CaptiviePortalTracker and checkMobileProvisioning so they use the
same code for the notifications.
* checkMobileProvisioning was simplified to have only a timeout as
returning the result is now harder as we abort simultaneous call
otherwise we'd could get into loops because we now check every time
we connect to mobile.
- Enhanced MDST to handle the provisioning network.
- Added CONNECTED_TO_PROVISIONING_NETWORK to NetworkInfo to make a new
state so we don't announce to the world we're connected.
- TelephonyIntents.ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN
is sent by the low level data connection code to notify Connectivity
Service that a provisioning apn has connected. This allows CS to
handle the connection differently than a normal connection.
Bug: 10328264
Change-Id: I3925004011bb1243793c4c1b963d923dc2b00cb5
Doesn't clear the global proxy when a deprecated one is not found because
there still may be a non-deprecated global proxy present.
Bug: 10457179
Change-Id: I68e6d5aee7b4940f9315484060c7d82cb8ccfa70
This change starts tracking traffic quality data for WiFi and mobile
networks. The quality is tracked based on incidental traffic, and not
on specific measurements. Theoretical bandwidths are hard-coded, as
well as sampling interval; although sampling interval can be changed
by setting a system policy.
Bugs filed to remove shortcomings of this change -
10342372 Change LinkInfo name to something better
10342318 Move hardcoded values of MobileLinkInfo to resources
so they can be updated without changing code
Bug: 10006249
Change-Id: I83d8c7594da20fe53abbd5e1f909b1f606b035bb
1. Make addLinkAddress a no-op if the address already exists.
2. Make addLinkAddress, addStackedLink and removeStackedLink
return a boolean indicating whether something changed.
3. Add a removeLinkAddress method (currently there is no way of
removing an address).
3. Move hasIPv6Address from ConnectivityService to
LinkProperties, where it belongs.
Bug: 9625448
Bug: 10232006
Change-Id: If641d0198432a7a505e358c059171f25bc9f13d5
Lorenzo Colitticommited 2013-08-20 21:16:37 +09:00
When the system becomes loaded the PhoneApp can be delayed
significantly and a call to setEnableFailFastMobileData may not
occur because the channel between the MobileDataStateTracker (MDST)
and DcTracker (DCT) is not connected.
Solution: Add a isReady to MDST and isMobileDataStateTrackerReady to
ConnectivityService and call it from isMobileOk.
Bug: 10351868
Change-Id: I92f9d58121b88186b636cd71c2fd2ef9a28f7cf6
Move the early return outside the try {} finally so we don't call
setEnableFailFastMobileData(DctContants.DISABLED). Otherwise
referencing counting is wrong and an exception is thrown in DcTrackerBase.
Bug: 10304904
Change-Id: I5ba5121e473bada9f3daa8d6f3d3577cec8212fc
Move the early return outside the try {} finally so we don't call
setEnableFailFastMobileData(DctContants.DISABLED). Otherwise
referencing counting is wrong and an exception is thrown in DcTrackerBase.
Bug: 10304904
Change-Id: I5ba5121e473bada9f3daa8d6f3d3577cec8212fc
PAC (Proxy auto-config) files contain a single javascript function,
FindProxyForURL(url, host). It gets called to determine what proxy should be
used for a specific request.
This adds PAC support to the system. The ProxyProperties has been modified
to hold the PAC file when one is present. The Proxy method
setHttpProxySystemProperty has been modified to insert a PacProxySelector
as the default ProxySelector when it is required. This new ProxySelector
makes calls to the ConnectivityService to parse the PAC file.
The ConnectivityService and the WifiConfigStore have been modified to support
saving the extra PAC file data.
The ConnectivityService now has a class attached (PacProxyNative) that
interfaces to the native calls for PAC files. The parsing of the PAC file
is handled by libpac (which is being added to external/) which utilizes
libv8 to parse the javascript.
As a fallback to applications that don't use the java ProxySelector, the proxy
is setup to point to a local proxy server that will handle the pac parsing.
bug:10182711
Change-Id: I5eb8df893c632fd3e1b732385cb7720ad646f401
When captive portal checking completes pass back the result.
This is used to enable/disable failing fast for mobile. When
failing fast is enabled we don't check for data stalls and thus
won't be continually trying to do recovery operations, such as
restarting the radio.
Bug: 9462512
Change-Id: I0dea0eee519f8ee7f94e79d40e82c18f30d7fe2e
I needed to test the result of startUsingNetworkFeature, otherwise
on mobile networks that are slow to come up, we won't detect
warm SIMs after booting.
Bug: 9962943
Change-Id: Ib638a4e43867ecaa85d6abff65643b77a63526b6
After detecting there is a captive portal the url used in the
notification for mobile networks should be updateable via gservices.
These urls will be the same as used by CheckMp and is needed for
carriers that have specific provisioning urls such as AT&T and Verizon.
Bug: 9622647
Change-Id: Idcf4dabc72ece1dbbe1d5e5a21e550dd06fe16c7
Lorenzo Colitti
commited 
Robert Greenwalt
authored and
Android (Google) Code Review
commited 
Wink Saville
commited 
Jason Monk
authored and
Jeff Sharkey
authored and
Yuhao Zheng
commited 
Sreeram Ramachandran
authored and
sy.yun
authored and
Android Git Automerger
commited 
Vinit Deshapnde
authored and