UDP packets can be built as:
val p = ether / ipv6 / udp / data
val p2 = ether / ipv4 / udp / data
val p3 = ether / ipv4 / udp / ipv4 / udp / data
This also gets rid of Icmp6Pkt in favor of a function call that
calculates the checksum over an L4 packet.
This does add a bit of duplication: the build() function for RA and NA
packets is identical, and UdpPkt#build() is not far off. However, subtle
differences in L4 packet format (namely the checksum and length
positions) make generalizing this code difficult. This is possible by
passing the checksum position, proto byte, and adding an abstract
function that fills in the L4 length field before performing checksum
calculation. However, this complexity is likely not worth it. If the
repetition becomes obvious once more protocols (such as ICMPv4/6 echo,
etc.) are added, this decision will be revisited.
Test: TH
Flag: EXEMPT mainline
Bug: 1000001
Change-Id: Ia78792418f29a3be091ebdc9bb2c26e45da9f2b1
Patrick Rohrauthored and Maciej Żenczykowskicommited 2025-04-07 14:22:43 -07:00
Options and fragments aren't currently supported.
Test: decoded test packet on packetor.com
Flag: EXEMPT mainline
Bug: 1000001
Change-Id: Ia3a094cb1d2b093cae2f372cc84a72ad7e107105
And integrate into EthernetManager. So it can make proper use of
PacketBuilderUtils.
Test: TH
Flag: EXEMPT mainline
Bug: 1000001
Change-Id: Ifbca38e6efde68e015c69bf919d079d1605310d1
Scapy allows building packets in order, i.e. by assembling them using
the division operator: val p = ether / ipv6 / icmpv6.
This change adds support for an identical pattern. To do so, it first
assembles all packets in order inside a packet builder class. When
build() is called, it traverses the packet list in reverse and assembles
the final packet, similar to ther original instance of the code. To
support checksum generation in the future, the code also keeps track of
the "closest pseudo header packet", i.e. the nearest encapsulating IPv6
(and soon IPv4) packet. This architecture should eventually be able to
support the creation of more complex packets, for example:
val p = ether / ipv6 / ipv6-ext / udp / ipv6 / udp.
(Note that now that I am writing this, I realize that this could
probably be significantly simplified by including IPv6 extension header
support as part of Ip6Pkt and always using the encapsulating packet for
the pseudo header...)
This code does not yet implement checksum generation.
Test: TH
Flag: EXEMPT mainline
Bug: 1000001
Change-Id: I9b0fa0e5bb66edf6928d9b96144c5ed133ebab64
In the future, we could consider adding an ICMPv6 base class that
implements common functionality between NaPkt and RaPkt. However, given
that checksumming is not currently supported, the common functionality
is limited to only a couple of lines.
Test: TH
Flag: EXEMPT mainline
Bug: 1000001
Change-Id: Id45f2ed43f45778e80b303bd356babcc93de1c3f
This commit enhances the stability of the APFv{4,6} multi-device tests by addressing several sources of flakiness and improving the test setup and validation.
Specifically, this commit:
* Increased sleep time in the test setup. This ensures APF is activated before each test, preventing unexpected behavior.
* Added sleep time in `ApfV4Test` to ensure APF remains enabled and is not disabled due to high throughput scenarios.
* Changed the validation order to first check received packets and then APF counters. This helps to more easily identify the root cause of test failures.
* Changed the Ethernet destination address from multicast to unicast in `ApfV6Test` to prevent packets from being filtered due to DTIM skip.
* Removed the `test_broadcast_arp_request_offload()` test, which was flaky due to DTIM skip and is adequately covered by the `test_unicast_arp_request_offload()` test.
Bug: 406570694
Flag: TEST_ONLY
Test: atest CtsConnectivityMultiDevicesTestCases:ApfV4Test
Test: atest CtsConnectivityMultiDevicesTestCases:ApfV6Test
Test: run cts -m CtsConnectivityMultiDevicesTestCases --skip-preconditions -t ApfV4Test --shard-count 2
Test: run cts -m CtsConnectivityMultiDevicesTestCases --skip-preconditions -t ApfV6Test --shard-count 2
Change-Id: I053509459078d0bd94e16a6bf7349b948f930e6c
Jimi Chenauthored and Yuyang Huangcommited 2025-04-02 04:31:01 -07:00
This change introduces a set of generic packet builder utility classes
that can be used in tests. The API surface aims to be similar to scapy
with a focus on ease of use.
Test: TH
Flag: EXEMPT mainline
Bug: 1
Change-Id: I9c751cece7bbad6bc38953cb52e9ab42393bab89
executeShellCommandRwe is U+. Use executeShellCommandRw which is S+
instead, and annotate methods accordingly. stderr is not used in any
instrumentation at the moment.
Bug: 405109522
Test: atest
Change-Id: I8212cb340cfb7e5ee5d0da314613b474e4f155fc
This is necessary to pass tests whatever the values of the features are.
NetworkAgentTest was updated assuming the feature was true, so
this patch revives the old code for when it's false.
TestableNetworkAgent reads the feature directly from
ConnectivityManager when it's not mocked.
Test: CtsNetTestCases
Change-Id: Ia556fbb1d1b6a38a4995b021981e2693d778bfff
CarrierConfigRule#setHoldCarrierPrivilege will try to acquire/drop the
carrier privilege, but does not wait for the result of the operation. If
a test immediately calls an API that requires carrier privilege before
the operation completes, then it will fail.
Fix this by waiting for the operation to succeed before returning.
Bug: 295979433
Test: presubmit
Change-Id: Ic7cc9e1dbc206fbc0c3b79058b5782d93e89f1d7
Quang Anh Luongcommited 2025-03-21 18:13:37 +09:00
This reverts commit 372a15220a.
Reason for revert: this is Android B+ CTS and shouldn't be run with previous release, this can help to catch human error.
Change-Id: I867c63511d4f640e07b8317506291de284efcef3
CTS tests screen-on device in the beginning, but APF is not activated after screen-off in the test setup.
This change adds 3 secs delay to ensure APF activation before test execution.
Bug: 402667362
Test: ./cts-tradefed run cts-on-gsi -m CtsConnectivityMultiDevicesTestCases -t ApfV4Test --shard-count 2
Test: atest CtsConnectivityMultiDevicesTestCases:ApfV4Test
Change-Id: I067ce792b5f89e2f0051933982ebc734607fbf98
Now that the system server has a queue doing this job,
the queue on the network agent side can be removed.
Test: ConnectivityCoverageTests, CtsNetTestCases
Change-Id: Idf0435f447cfdd28d829a867d1085771837c6f9b
Move the existing helper methods to acquire carrier privileges in
NetworkAgentTest.kt to CarrierConfigRule where it can be reused by other
CTS tests. Also reset the carrier service package override in the rule
cleanup.
Bug: 216524590
Test: atest NetworkAgentTest
Change-Id: Id907a2d641aa61838119e2be65654b9796464498
Quang Anh Luongcommited 2025-03-18 13:05:01 +09:00
Currently ConnectivityDiagnosticsCollector invokes tcpdump with -U,
which would causes the collector failed to log ending packets due to
packet buffering.
Test:
android.net.cts.TrafficStatsTest#testTrafficStatsForLocalhost
Bug: 393471251
Change-Id: Ibe2977097bdeeef9546ce9c83b1dfd695c31f6d1
Mockito extended tends to cause all kinds of issues due to the way it
injects itself into the bytecode of framework classes instead of
creating subclasses.
Use non-extended mockito as it is not actually necessary for current
tests.
Test: atest
Change-Id: Id2874309cce2778c4405b852df9a3ae816c4abcb
Patrick Rohr
commited 
Maciej Żenczykowski
commited 
Android (Google) Code Review
commited 
Treehugger Robot
authored and
Yuyang Huang
authored and
Jimi Chen
authored and
Gerrit Code Review
commited 
Remi NGUYEN VAN
commited 
Chalard Jean
commited 
Quang Anh Luong
commited 
Junyu Lai
authored and