RaParams is populated with the upstream IPv4 MTU, rather than the IPv6
or route MTU. This change clamps that value between 1280 and 1400. 1280
as it is the minimum IPv6 MTU and 1400 to keep QUIC working. A follow up
change could improve on this by either adding the IPv6 MTU to
LinkProperties, or (possibly better) binding and connecting a UDP socket
to determine the MTU. Note that at that point the MTU in the Tether6Key
should also be fixed.
Test: TH
Flag: EXEMPT low risk
Bug: 432676104
Change-Id: I1d900039caf84c58cd04fdb52bdeaf2d1b846268
Currently, Tethering feature flags are located in
TetheringConfiguration or other classes. However,
not all flags are truly related to the tethering configuration.
Therefore, create the TetheringFeatureFlags class to centralize
and manage these feature flags more easily.
Test: m
Flag: EXEMPT refactor
Change-Id: Iadca476aba57019776061102cb2a6d8226a70200
The feature will be gradually enabled via flag rollout.
Sample ip rule output:
0: from all lookup local
10000: from all fwmark 0xc0000/0xd0000 lookup legacy_system
11000: from all iif lo oif dummy0 uidrange 0-0 lookup dummy0
11000: from all iif lo oif rmnet1 uidrange 0-0 lookup rmnet1
11000: from all iif lo oif wlan0 uidrange 0-0 lookup wlan0
16000: from all fwmark 0x10063/0x1ffff iif lo lookup local_network
16000: from all fwmark 0x10064/0x1ffff iif lo lookup rmnet1
16000: from all fwmark 0x10066/0x1ffff iif lo lookup wlan0
16000: from all fwmark 0x10063/0x1ffff iif lo lookup wlan0
17000: from all iif lo oif dummy0 lookup dummy0
17000: from all iif lo oif rmnet1 lookup rmnet1
17000: from all iif lo oif wlan0 lookup wlan0
18000: from all fwmark 0x0/0x10000 lookup legacy_system
19000: from all fwmark 0x0/0x10000 lookup legacy_network
20000: from all fwmark 0x0/0x10000 lookup local_network
20000: from all fwmark 0x0/0x10000 lookup wlan0
21000: from all iif wlan0 lookup rmnet1
23000: from all fwmark 0x64/0x1ffff iif lo lookup rmnet1
23000: from all fwmark 0x66/0x1ffff iif lo lookup wlan0
31000: from all fwmark 0x0/0xffff iif lo lookup rmnet1
32000: from all unreachable
Test: adb shell device_config put tethering tethering_local_network_agent 1
Test: atest TetheringTests:android.net.ip.IpServerTest TetheringManagerTest
Bug: 349487600
Change-Id: Iaa88dde645da917149fec0d44fff796c551bcc7e
Legacy behavior will return success results to multiple startTethering
calls of the same type, even though the link layer can only support one
of those requests at a time (other than tethered AP + LOHS).
For B+, clean up this behavior by only allowing the amount of requests
that the link layer can concurrently support. To do this, we'll
introduce the concept of "fuzzy-matching" such that if a new request
fuzzy-matches an existing request (either pending or serving), this
indicates that the link layer cannot support the new request
concurrently, and we'll fail the new request with
TETHER_ERROR_DUPLICATE_REQUEST.
To keep track of serving requests, we'll store the request and it's
IpServer in RequestTracker when we call IpServer.enable(), and we'll
remove it (indexed by IpServer) when
1) Calling IpServer.onStop()
2) Calling IpServer.unwanted()
3) We detect an IpServer transition to AvailableState with error code
Note: This was originally merged as aosp/3529632 but was reverted due to
a crash when reading aconfig flags at boot. That issue has been fixed
here.
Reverted changes: /q/submissionid:3541662-revert-3527440-JRJJTQBUFC
Bug: 216524590
Test: atest TetheringTest RequestTrackerTest TetheringManagerTest
Change-Id: I87a1ed31927cda27d3b7fdd7c823b8f828f8d777
Quang Luongauthored and Quang Anh Luongcommited 2025-03-17 15:18:29 +09:00
Revert submission 3527440
Reason for revert: Droidmonitor created revert due to b/403261952. Will be verifying through ABTD before submission.
Reverted changes: /q/submissionid:3527440
Change-Id: Ife596c639899528778f53fef797749fa88596dd6
Legacy behavior will return success results to multiple startTethering
calls of the same type, even though the link layer can only support one
of those requests at a time (other than tethered AP + LOHS).
For B+, clean up this behavior by only allowing the amount of requests
that the link layer can concurrently support. To do this, we'll
introduce the concept of "fuzzy-matching" such that if a new request
fuzzy-matches an existing request (either pending or serving), this
indicates that the link layer cannot support the new request
concurrently, and we'll fail the new request with
TETHER_ERROR_DUPLICATE_REQUEST.
To keep track of serving requests, we'll store the request and it's
IpServer in RequestTracker when we call IpServer.enable(), and we'll
remove it (indexed by IpServer) when
1) Calling IpServer.onStop()
2) Calling IpServer.unwanted()
3) We detect an IpServer transition to AvailableState with error code
Bug: 216524590
Test: atest TetheringTest RequestTrackerTest TetheringManagerTest
Change-Id: I1e193f3595a48f806fb70fd08630a12ce2631a59
Quang Anh Luongcommited 2025-03-13 11:11:17 +09:00
This is a no-op refactoring which inline the functionalities
to IpServer, enabling subsequent changes to move
networkAddInterface part to ConnectivityService when the
tethering is enabled.
Test: atest TetheringTests:android.net.ip.IpServerTest
atest NetdStaticLibTests:com.android.net.module.util.NetdUtilsTest
Bug: 349487600
Change-Id: I6d0e5d349691df7a15bee852d5fd1dd19f5da6f6
This is a no-op, preparatory refactoring to isolate route
modification functionality, enabling subsequent changes to move
routing control to ConnectivityService.
Test: atest TetheringTests:android.net.ip.IpServerTest
atest NetdStaticLibTests:com.android.net.module.util.NetdUtilsTest
Bug: 349487600
Change-Id: I55af07968567b173dd9f97795600390439f1b927
IpServer#enable is called with both a non-null TetheringRequest and the
requestedState, but the requestedState is derived from the
TetheringRequest's connectivity scope. Remove this requestedState arg
and simply have IpServer read the connectivity scope itself.
Bug: 216524590
Test: covered by existing tests
Change-Id: I73227f5053da3a2ab35563268fc416b6dd9b1801
Quang Anh Luongcommited 2025-01-30 14:30:51 +09:00
Currently the enableIpServing->tetherInternal call stack may have a
tethering request alongside a redundant tethering type and requested
state. The redundant arguments were necessary since there may be cases
where the active request is null (e.g. back-to-back start/stop, which
removes the active request before the link layer event enables ip
serving).
This change gets rid of the redundant arguments and makes the call stack
take a non-null TetheringRequest. In case the active request is not
found, we will create a placeholder request with just the type and
connectivity scope (i.e. requested state). This should be equivalent to
the old code of sending a null request (since none of the other fields
in TetheringRequest are used), making this a no-op change.
Bug: 216524590
Test: covered by existing tests
Change-Id: I5ac83c74f5bc4aec2fe85daa9477740749d95c63
Quang Anh Luongcommited 2025-01-30 14:30:49 +09:00
This reverts commit 685b8aa508.
Reason for revert: May break Bluetooth pre-T IPv4 prefix conflict handling if TetheringRequest is not specified. Instead we should add this to AOSP/3389321 when we can guarantee IpServer always has a tethering request here.
Bug: 384812983
Test: presubmit
Change-Id: I9c65e87804855fd293fa75c921de3d256caad1b3
Follow-up from aosp/3383831, some arguments are still missing,
adding them and update tests accordingly.
Test: atest NetdStaticLibTests
Bug: 349487600
Change-Id: I495291f1e57c3a32c015fc7dfa3c2e6e86663da8
This is a no-op refactoring which:
1. Updates netd utility methods to handle custom netIds.
2. Rename internal methods to reflect the functionality.
3. Import constants from TetheringManager to improve
readability.
This refactoring is a prerequisite for future changes that will
utilize a new netId for routing instead of LOCAL_NETWORK_ID.
Test: atest NetdStaticLibTests TetheringTests CtsTetheringTest
Test: adb shell ip ru && adb shell ip ro show table local_network
Bug: 349487600
Change-Id: I1f3a68d24852b6bd85ce7be2ec58746e49b67636
IpServer currently starts/stops tethering by specifying the tethering
type, but this will be a problem when we start to allow multiple
requests per type. To fix this, specify the TetheringRequest instead.
Note this CL has no functional changes.
Bug: 216524590
Test: atest TetheringTest TetheringManagerTest
Change-Id: I6bd9ceebcaa637a540435d5e91a35382f167a809
Quang Anh Luongcommited 2024-11-19 19:32:22 +09:00
Include SoftApConfiguration in TetheringEventCallback via
TetheringInterface, to allow apps to know which interfaces are created
with their SoftApConfigurations.
API-Coverage-Bug: 371133403
Bug: 216524590
Test: atest TetheringTest CtsTetheringTest
Change-Id: I1b4868ba8327bee3b03c0f21e5b4f0845f2f24a8
Quang Anh Luongcommited 2024-11-18 13:37:39 +09:00
This CL splits requestDownstreamAddress into two methods: requestStickyDownstreamAddress and requestDownstreamAddress.
- The requestStickyDownstreamAddress is equivalent to the former requestDownstreamAddress when useLastAddress=true.
- The new requestDownstreamAddress method allows allocating an address without providing the interface type and scope, which is Thread NAT64's use case.
Bug: 369282577
Change-Id: Ib839d121c7b46c492f2c4c1c61b52b5d017fa055
API
This CL refactors IpServer to allocate IPv4 address via RoutingCoordinatorManager
instead of directly talking to PrivateAddressCoordinator class.
Bug: 350699020
Change-Id: I5c68620626a3668c079234da232f0ef2beb46628
* changes:
Remove unused method TetheringConfiguration#isRandomPrefixBaseEnabled()
PrivateAddressCoordinator: introduce Dependencies class
PrivateAddressCoordinator: move the special handling of WiFi P2P dedicated IP to IpServer
Treehugger Robotauthored and Gerrit Code Reviewcommited 2024-10-08 17:07:29 +00:00
dedicated IP to IpServer
The source of
TetheringConfiguration#shouldEnableWifiP2pDedicatedIp is in the
Tethering's resources. As refactoring the code, we noticed that it will
be simpler to handle this at IpServer (constructed using
TetheringConfiguration) instead of at PrivateAddressCoordinator
(will require reflection to read the Tethering's resources).
Bug: 369282577
Change-Id: I7b766ef6a769043c2a4ca11741db5c16c5c57071
Technically, UnavailableState should not handle any messages at all (and
shouldn't exist). As the IpServer has already been removed from
mTetherStates. However, sendInterfaceState() cleans up IPv6 tethering
which eventually triggers a CMD_IPV6_TETHER_UPDATE. Instead of
preventing the CMD_IPV6_TETHER_UPDATE, ignore it for now and remove this
state entirely once we have rolled out SyncStateMachine.
Bug: 368713124
Test: TH
Change-Id: I32ae9583aa01411fa1fc299a0fc91138557b7ae2
The break is missing when processing CMD_SERVICE_FAILED_TO_START
in BaseServingState.
Test: atest TetheringTests
Change-Id: I1699da251f90ec447466266b704df24d081c40b3
On Android R, IpServer uses netd to set up tethering while on S+ it uses
RoutingCoordinator.
This CL lets Tethering own a RoutingCoordinatorService when the SDK
version <= R so IpServer can always use RoutingCoordinator instead of
netd.
Bug: 350699020
Test: CI
Change-Id: I0ed33fb050260c26be87079bed0e189716cd8782
- This CL puts RoutingCoordinator into staticlibs to make it usable by
both Tethering and ConnectivityService on R.
- This CL also changes the return type of
ConnectivityInternalApi#getRoutingCoordinatorManager() to IBinder so
it has fewer dependencies.
Bug: 350699020
Test: CI
Change-Id: Iba096e940795cd33e61c5141721394ad39e5ce6d
Replace TetheringRequestParcel with TetheringRequest in the service
code. This makes future changes easier since TetheringRequest is a
proper class and not an AIDL object.
Bug: 216524590
Test: atest TetheringTest TetheringManagerTest
Change-Id: I0cdee597d393e53feb9fe9aff4d6c67330c88599
Quang Anh Luongcommited 2024-06-26 16:25:13 +09:00
* changes:
Clean up BpfCoordinatorTest after refactors
Move upstream interface BPF support check to BpfCoordinator
Refactor BPF map update logic of upstream interface change
Centralize IP neighbor monitoring in BpfCoordinator
Get rid of BpfCoordinator#mPollingStarted
KH Shiauthored and Gerrit Code Reviewcommited 2024-06-22 12:34:34 +00:00
Removed upstream interface BPF support check from IpServer and moved
it to BpfCoordinator. The support check can be performed directly in
BpfCoordinator using the interface name.
Test: atest TetheringTests
Bug: 294025403
Change-Id: Ia51bc3ab18dd21afdca9db9199fa060aab68f768
This CL centralizes IP neighbor monitoring in the BpfCoordinator,
eliminating the need for redundant monitors in each IpServer.
Test: atest TetheringTests
Bug: 294025403
Change-Id: Ie6fbc3eeaa0ed4a34a6680714f44678e2d5b633a
Refactor IpServer/BpfCoordinator to remove mPollingStarted, and just
maintain the invariant that "data usage polling and conntrack
monitoring are running iff at least one IpServer is serving".
Test: atest TetheringTests
Bug: 294025403
Change-Id: I55064ee78e1cda12ad76b7c31496d760dcffdd76
Check out #isLoggable from frameworks/base/core/java/android/util/Log.java to
learn how to enable the log.
Bug: 329552689
Change-Id: I86ce0dae947cf56da069dfe3145ef074de11217e
Test: TH
This reverts commit cf11be9eb2.
Reason for revert: avoid some IpServer(s) running the new sync state machine while others use the async state machine.
Bug: 319212113
Change-Id: Ib086a7ccd102f38e579c79f94aceae9971f1853a
Mark Chienauthored and Markcommited 2024-01-22 11:34:14 +00:00
* changes:
Revert "Refactor RouterAdvertisementDaemon with FdEventsReader"
Revert "Refactor RouterAdvertisementDaemon to build new RA in HandlerThread"
Yuyang Huangauthored and Gerrit Code Reviewcommited 2023-12-20 08:14:12 +00:00
This reverts commit bdcd7db9d8.
Reason for revert: Design changes, don't use extra Handler in RouterAdvertisementDaemon.
Change-Id: I4888f8f22aea2cadbb6064e63f872c605025930f
This reverts commit 23a2158c38.
Reason for revert: Design changes, don't use extra Handler in RouterAdvertisementDaemon.
Change-Id: Iba829ec028e887b6625f4f972e936ca5757a7614
KH Shiauthored and Gerrit Code Reviewcommited 2023-12-20 06:25:54 +00:00
The logic is currently disabled by default, adding a flag so
that we can compare result with A/B rollout.
Test: atest TetheringTests
Change-Id: If640b9a172b97aa67c49b2976cdef118218f1e0f
HandlerThread was introduced in aosp/2493357. This patch moves the
code originally located in buildNewRa() into the HandlerThread.
Bug: 246928127
Test: atest TetheringPrivilegedTests TetheringIntegrationTests \
TetheringTests
Change-Id: I5f6df0a3a79d7f4a865cfec7f88bc28816b1db95
This patch changes the implementation of UnicastResponder in the
RouterAdvertisementDaemon with FdEventsReader. The change includes
replacing Thread with HandlerThread, create socket in non-blocking
mode (required by FdEventsReader) and use FdEventsReader to listen
to the solicited RS packets. Two commands (CMD_START & CMD_STOP)
were added to control the lifecycle of the FdEventsReader.
Bug: 246928127
Test: atest TetheringPrivilegedTests TetheringIntegrationTests \
TetheringTests
Test: Enable WiFi hotspot and connected with another Pixel client:
1. Tcpdump on the Pixel client, checking the RA packets
2. Verify IPv6 addresses were configured
3. ping6 2001:4860:4860::64
Change-Id: I6e89903df90864e3bb34d498e353d6f87193e9d6
ArraySet is designed to be more memory afficient than HashSet. It is
suitable to store small numbers of items.
Test: atest TetheringPrivilegedTests TetheringIntegrationTests \
TetheringTests
Bug: 261923493
Change-Id: I2bd2eded801cc05ce53ef9f9486b13faf1772d22
This reverts commit 55ccfe19e2.
Reason for revert: this must be introducing some sort of race
it appears to cause
atest EthernetTetheringTest 'NetdBinderTest#TetherForwardAddRemove'
to no longer reliably pass.
Change-Id: I5281ab3f42c5ce268d97a12db24a6768db3f4354
Maciej Żenczykowskiauthored and Gerrit Code Reviewcommited 2023-10-28 02:10:52 +00:00
Patrick Rohr
commited 
Paul Hu
commited 
Junyu Lai
commited 
Quang Luong
authored and
Priyanka Advani (xWF)
commited 
Gerrit Code Review
commited 
Handa Wang
commited 
Treehugger Robot
authored and
KH Shi
authored and
Mark Chien
commited 
Yuyang Huang
authored and
Motomu Utsumi
commited 
Chalard Jean
commited 
Maciej Żenczykowski
authored and