Sometimes USER_UNLOCKED can be sent before USER_STARTED. This puts
lockdown in a bad state as it needs a fully-functioning user to tie
itself to and listen for connectivity events.
Bug: 27637943
Change-Id: I41a784a75a8c8674cb61dbba10693dd56c9396dd
Listen for ICMP6 router advertisements on networks that support
packet filters. Construct packet filters and install them to
ignore redundant future ICMP6 router advertisements.
Bug: 26238573
Change-Id: If78300b9fda257c21f3ee6533e1da7de9f897cb4
Paul Jensenauthored and Lorenzo Colitticommited 2016-03-03 17:32:01 +09:00
When the credential-encrypted private storage for the target user is
unlocked, we should try to start up VPN for them.
Bug: 27357283
Change-Id: Id9079230d00e3cea08a49ae66bd1f553416b4f54
With this it's possible for callers to:
Network network = ...
LinkProperties lp = ...
NetworkDiagnostics netdiag = new NetworkDiagnostics(network, lp, 5000);
netdiag.startMeasurements();
netdiag.waitForMeasurements();
boolean result = true;
for (Measurement m : netdiag.getMeasurements()) {
if (!m.checkSucceeded()) {
result = false;
// Additional error handling here.
}
}
return result;
Bug: 21832299
Bug: 26780890
Change-Id: Iaf7ff029e2c6a998b574c23d0dcde8d57a467a22
Slowly chipping away at TetherUtil to clean up this code.
This CL also adds an admin check to
ConnectivityService.isTetheringSupported to get parity with the
TetherUtil function before removing it.
Change-Id: Ibe7c5c9fb420d57e5458f77dad30e8a1e751a3e2
When the roaming status of the cell network changes, it is handled as
follows:
-DcActiveState gets an event (either EVENT_DATA_CONNECTION_ROAM_ON or
EVENT_DATA_CONNECTION_ROAM_OFF) and calls
NetworkAgent#sendNetworkInfo with updated NetworkInfo.
-ConnectivityService then gets an EVENT_NETWORK_INFO_CHANGED and calls
updateNetworkInfo with the new info.
With the previous code, the NetworkAgent's NetworkInfo object would be
updated internally, but because the state of the connection had not
changed from CONNECTED, the change would be considered a duplicate and
otherwise ignored.
With the new code, we call notifyIfacesChanged() when the state is the
same but the roaming status has changed. That should be all that is
necessary, as roaming is not exposed as a link property or network
capability today.
Bug: 26545456
Change-Id: I33d32d1fa84ce41dbe01542e5b498eda4b744b74
This will make it possible to find nethandles via, e.g.
"dumpsys connectivity --short".
Without this, native multinetwork API debugging requires running
"dumpsys connectivity --diag" in order to see the nethandle values.
Bug: 19537384
Change-Id: Icdd2b112523d4ecf88d5339f229e714a56d248f8
Tethering just constructs its own Looper right below where it
assigns the looper param to mLooper.
Change-Id: I2d522942eff2ad3439bb3961e78ab0625d3fa9df
This CL exposes startTethering and stopTethering functions which also
encapsulate all provisioning check logic. Right now, only silent checks
are implemented, but UI checks will come in a follow-up CL. GTS tests
and Settings changes are under the same topic ID.
BUG: 26247383
Change-Id: I65f61d899594cb3f9035d8496366af17a57a090f
Removed the dependency on KeyStore encryption by removing that flag for
VPN profiles which don't use secure credentials when saving in Settings.
Old encrypted profiles will simply fail to load untile USER_PRESENT is
sent, as before.
Bug: 26108660
Change-Id: I2677d741d54252f15cb772c94ce1b39041f1e19c
This also creates a hidden api for the captive portal server calculation
so that the Setup Wizard can use this as well.
bug:13246857
Change-Id: I4dfd0916df97cfce13252c7cc15f7bd05ed95f77
Current usage of NetworkSpecifier: network factory will match a request
if the request has either a (1) empty network specifier, or (2) a
network specifier which is identical to that of the network factory.
Note: 'matching' w.r.t. network specifier - all other matching rules
are still in effect.
Change: add rule (3) or the network specifier of the network factory
is the special string (which is defined as "*" and which user-facing
network requests aren't allowed to use).
Rationale: allows on-demand network creation.
Example:
- Can specify a Wi-Fi NetworkRequest with NetworkSpecifier="ssid"
- It will match a Wi-Fi network factory specifying NetworkSpecifier="*"
- That network factory will bring up a Wi-Fi network, connecting to the
specified SSID.
- Once the network is created it will create a NetworkAgent which will
now have a NetworkSpecifier matching that of the request (not the
match-all special string!)
That final step of making sure that the NetworkAgent matches the request
and not the match-all is critical to delivering any subsequent callbacks
correctly. I.e. your network will only get callbacks which match it.
Bug: 26192833
Change-Id: I49e3b492e0bb48a3f6e9a34e3f94f0e1cf89741f
You can now control the range of target SDKs that receivers
will be need to have in order to receive your broadcast.
Use this for CONNECTIVITY_ACTION to not allow N+ applications
to receive these broadcasts through their manifest.
Also tweak the broadcast debug output code to now include the
disposition of each receiver in the list. This is becoming
important as skipping receivers is becoming a more common
thing to have happen.
Change-Id: I251daf68575c07cbb447536286ab4e68b7015148
http://ag/572619 , which removed the 3-second CONNECTIVITY_ACTION delay,
removed its only caller, but missed removing the message declaration
and processing code.
Bug: 20013379
Change-Id: Ice573569715ba424b8bf66d1dd08184d2b4a60f1
Lorenzo Colitticommited 2015-12-10 13:08:35 +00:00
This is a partial revert of http://ag/738523 , but not a full
revert because M apps that have gone through the WRITE_SETTINGS
route to obtain permission to change network state should
continue to have permission to do so.
Specifically:
1. Change the protection level of CHANGE_NETWORK_STATE back from
"signature|preinstalled|appop|pre23" to "normal". This allows
apps that declare CHANGE_NETWORK_STATE in their manifest to
acquire it, even if they target the M SDK or above.
2. Change the ConnectivityManager permission checks so that they
first check CHANGE_NETWORK_STATE, and then ask Settings
if the app has the WRITE_SETTINGS runtime permission.
3. Slightly simplify the code in the Settings provider code that
deals specifically with the ability to change network state.
4. Make the ConnectivityService permissions checks use the
ConnectivityManager code to avoid code duplication.
5. Update the ConnectivityManager public Javadoc to list both
CHANGE_NETWORK_STATE and WRITE_SETTINGS.
Bug: 21588539
Bug: 23597341
Change-Id: Ic06a26517c95f9ad94183f6d126fd0de45de346e
Lorenzo Colitticommited 2015-10-22 08:33:45 +09:00
Play a sound and vibrate (by setting DEFAULT_ALL) only if the
user manually selected the network. This applies to both captive
portals and networks with no Internet access.
Bug: 24126143
Change-Id: Idf075d5c85f9f4b07a3431a25d1a3f7089cf1ee2
Lorenzo Colitticommited 2015-10-21 09:59:31 +09:00
This is currently being hit because Settings does not clear the
always-on VPN configuration when the corresponding VPN profile is
deleted. This will be fixed in Settings, but there's no harm in
being robust to invalid configurations here.
Bug: 23625458
Change-Id: Id185a54d5892339197cd40026df5174debd957cf
Lorenzo Colitticommited 2015-10-13 15:29:14 +09:00
In a new split system user model, owner of a restricted profile is not limited
to just user0. restrictedProfileParentId field should be used to get an owner.
Bug: 22950929
Change-Id: I928319a9450e543972237a42267eb2404e117c83
1. When registering a NetworkCallback, only update RSSI
thresholds if the request specifies a signal strength.
2. When releasing a NetworkCallback, only update RSSI
thresholds if the request specified a signal strength.
3. Add logging.
Add logging.
Bug: 21405941
Bug: 23679346
Bug: 23815756
Change-Id: I4bc42d0ab02285a7a9d14e09f8a1cd868f4d9d7f
Lorenzo Colitticommited 2015-09-15 16:00:39 +09:00
getActiveNetworkInfo() and friends already know how to augment their
results to help apps detect when network access is blocked. This
change wires up the new app-idle and device-idle firewall rules to
be reported through these APIs.
This also causes other platform tools like DownloadManager and
SyncManager to respect these new policies.
Bug: 24050462
Change-Id: Id9517b0b70be7e3ca2ab27bed8049db916e4d829
This will hopefully allow us to determine if the router does not
have our global addresses in its neighbour cache.
Bug: 23661687
Change-Id: I46734c3c719003939cfccf038457ec309a9ff967
Lorenzo Colitticommited 2015-09-10 15:49:54 +09:00
This currently fails in many different ways, but it tells us what
to fix.
Bug: 22606153
Bug: 23884210
Change-Id: If2e5ee0a8d7b26cad67d3d566ed5b1383e0db096
Lorenzo Colitticommited 2015-09-09 00:16:56 +09:00
Move SUPL CONNECTIVITY_ACTION bcasts to a different, hidden intent
to reduce the churn of apps when SUPL comes/goes.
Short term hack until SUPL moves to use the new APIs and there's
no bcast.
bug:23350688
Change-Id: I3dc14b42afa72465260aa41ccedfe1df27baabd9
Robert Greenwaltcommited 2015-09-01 15:06:04 -07:00
LTE radios take 10 seconds to power down, so we should set the
activity timeout to 10 seconds.
Bug:23294704
Change-Id: I7478b77f134b0fe2d82e39acd5c370add12735ca
Merge the CHANGE_NETWORK_STATE permission with WRITE_SETTINGS.
AndroidManifest.xml:
Raised the protection level of CHANGE_NETWORK_STATE permission from
normal to signature|appops and pre23|preinstall for compatibility
provider/Settings:
Wrote new helper methods to check if app is allowed to change network
state.
ConnectivityManager.java & ConnectivityService.java:
Replace enforcement checks for CHANGE_NETWORK_STATE with
checkAndNoteChangeNetworkStateOperations instead.
Change-Id: If8c2dd3c76a5324ca43f1d90fa17973216c2bcc5
Robin Lee
commited 
Joe Onorato
commited 
Paul Jensen
authored and
android-build-merger
commited 
Lorenzo Colitti
authored and
Erik Kline
authored and
Jeremy Klein
commited 
Jeff Davidson
commited 
Etan Cohen
authored and
Android (Google) Code Review
commited 
Udam Saini
commited 
Dianne Hackborn
commited 
Android Git Automerger
commited 
Jeff Sharkey
commited 
Jeff Sharkey
authored and
Fyodor Kupolov
commited 
Robert Greenwalt
commited 
Adam Lesinski
authored and
Billy Lau
authored and