* changes:
Add integration test of tethering local network agent feature
Add unit test of tethering local network agent feature
Support LocalNetworkAgent for Tethering
Treehugger Robotauthored and Gerrit Code Reviewcommited 2025-03-21 07:42:40 -07:00
Allow carrier-privileged apps to call startTethering and stopTethering
for wifi tethering with a non-null SoftApConfiguration.
Bug: 295979433
Test: atest TetheringTests CtsTetheringTests
Change-Id: I7fae1964c44902b1d500729794fc59e5bdd185e5
Quang Anh Luongcommited 2025-03-21 18:25:28 +09:00
The feature will be gradually enabled via flag rollout.
Sample ip rule output:
0: from all lookup local
10000: from all fwmark 0xc0000/0xd0000 lookup legacy_system
11000: from all iif lo oif dummy0 uidrange 0-0 lookup dummy0
11000: from all iif lo oif rmnet1 uidrange 0-0 lookup rmnet1
11000: from all iif lo oif wlan0 uidrange 0-0 lookup wlan0
16000: from all fwmark 0x10063/0x1ffff iif lo lookup local_network
16000: from all fwmark 0x10064/0x1ffff iif lo lookup rmnet1
16000: from all fwmark 0x10066/0x1ffff iif lo lookup wlan0
16000: from all fwmark 0x10063/0x1ffff iif lo lookup wlan0
17000: from all iif lo oif dummy0 lookup dummy0
17000: from all iif lo oif rmnet1 lookup rmnet1
17000: from all iif lo oif wlan0 lookup wlan0
18000: from all fwmark 0x0/0x10000 lookup legacy_system
19000: from all fwmark 0x0/0x10000 lookup legacy_network
20000: from all fwmark 0x0/0x10000 lookup local_network
20000: from all fwmark 0x0/0x10000 lookup wlan0
21000: from all iif wlan0 lookup rmnet1
23000: from all fwmark 0x64/0x1ffff iif lo lookup rmnet1
23000: from all fwmark 0x66/0x1ffff iif lo lookup wlan0
31000: from all fwmark 0x0/0xffff iif lo lookup rmnet1
32000: from all unreachable
Test: adb shell device_config put tethering tethering_local_network_agent 1
Test: atest TetheringTests:android.net.ip.IpServerTest TetheringManagerTest
Bug: 349487600
Change-Id: Iaa88dde645da917149fec0d44fff796c551bcc7e
Allow DO apps to call startTethering and stopTethering for wifi
tethering with a non-null SoftApConfiguration.
Bug: 295979433
Test: atest TetheringTests CtsTetheringTests
Change-Id: Ie5836e9e30afb2df1de0640645d696e185aa2191
Quang Anh Luongauthored and Quang Luongcommited 2025-03-19 03:30:48 -07:00
Use WifiManager.startTetheredHotspot(TetheringRequest, Executor,
SoftApCallback) to start softap. This allows for passing in the
requested SoftApConfiguration via TetheringRequest.
Bug: 216524590
Test: atest TetheringTest TetheringManagerTest
Change-Id: Ie4fb851e8b2243d233f9a8b3e18e2fa335cec307
Quang Anh Luongcommited 2025-03-17 21:13:47 +09:00
isTetheringWithSoftApConfig flag is finalized, replace it with a simple
SdkLevel.isAtLeastB() check. This also fixes any issues with reading the
flag during boot.
Bug: 216524590
Test: covered by existing tests
Change-Id: I6c2717a68fa4f3c664c9948ec19b246db5afdb8b
Quang Anh Luongcommited 2025-03-17 15:18:29 +09:00
stopTethering with a TetheringRequest should only stop tethering if
there is an existing request (pending or serving) that fuzzy-matches the
input and whose UID matches the caller (unless the caller is Settings,
which is allowed to remove any request).
If there is no existing fuzzy-matched request, return
TETHER_ERROR_UNKNOWN_REQUEST.
Note: This was originally merged as aosp/3527440 but was reverted due to
a dependency CL being reverted. Remerging this on top of the fix for the
dependency CL.
Reverted changes: /q/submissionid:3541662-revert-3527440-JRJJTQBUFC
Bug: 216524590
Test: atest TetheringTest RequestTrackerTest TetheringManagerTest
Change-Id: I99dd2433efbb82f3721aa708ab50d198f6fbcb10
Quang Luongauthored and Quang Anh Luongcommited 2025-03-17 15:18:29 +09:00
Legacy behavior will return success results to multiple startTethering
calls of the same type, even though the link layer can only support one
of those requests at a time (other than tethered AP + LOHS).
For B+, clean up this behavior by only allowing the amount of requests
that the link layer can concurrently support. To do this, we'll
introduce the concept of "fuzzy-matching" such that if a new request
fuzzy-matches an existing request (either pending or serving), this
indicates that the link layer cannot support the new request
concurrently, and we'll fail the new request with
TETHER_ERROR_DUPLICATE_REQUEST.
To keep track of serving requests, we'll store the request and it's
IpServer in RequestTracker when we call IpServer.enable(), and we'll
remove it (indexed by IpServer) when
1) Calling IpServer.onStop()
2) Calling IpServer.unwanted()
3) We detect an IpServer transition to AvailableState with error code
Note: This was originally merged as aosp/3529632 but was reverted due to
a crash when reading aconfig flags at boot. That issue has been fixed
here.
Reverted changes: /q/submissionid:3541662-revert-3527440-JRJJTQBUFC
Bug: 216524590
Test: atest TetheringTest RequestTrackerTest TetheringManagerTest
Change-Id: I87a1ed31927cda27d3b7fdd7c823b8f828f8d777
Quang Luongauthored and Quang Anh Luongcommited 2025-03-17 15:18:29 +09:00
There are currently two variants of checkAndNotifyCommonError that do
the exactly the same thing, except one uses IIntResultListener and
another uses ResultReceiver. Remove the lesser-used ResultReceiver
variant and just use the IIntResultListener instead (with a
IIntResultListener wrapper for the ResultReceiver).
Bug: 216524590
Test: covered by existing tests
Change-Id: I292a96b32cd975852a52c7953b03bcb35728db24
Quang Anh Luongcommited 2025-03-14 15:27:49 +09:00
Revert submission 3527440
Reason for revert: Droidmonitor created revert due to b/403261952. Will be verifying through ABTD before submission.
Reverted changes: /q/submissionid:3527440
Change-Id: Ife596c639899528778f53fef797749fa88596dd6
Revert submission 3527440
Reason for revert: Droidmonitor created revert due to b/403261952. Will be verifying through ABTD before submission.
Reverted changes: /q/submissionid:3527440
Change-Id: I31ae861d5151c9db7e559ba19db7f07c9545d422
Priyanka Advani (xWF)authored and Gerrit Code Reviewcommited 2025-03-13 10:22:16 -07:00
stopTethering with a TetheringRequest should only stop tethering if
there is an existing request (pending or serving) that fuzzy-matches the
input and whose UID matches the caller (unless the caller is Settings,
which is allowed to remove any request).
If there is no existing fuzzy-matched request, return
TETHER_ERROR_UNKNOWN_REQUEST.
Bug: 216524590
Test: atest TetheringTest RequestTrackerTest TetheringManagerTest
Change-Id: Ia8a8eab78fbecd38321fd0d48734855cff16febb
Quang Anh Luongcommited 2025-03-13 12:49:08 +09:00
Legacy behavior will return success results to multiple startTethering
calls of the same type, even though the link layer can only support one
of those requests at a time (other than tethered AP + LOHS).
For B+, clean up this behavior by only allowing the amount of requests
that the link layer can concurrently support. To do this, we'll
introduce the concept of "fuzzy-matching" such that if a new request
fuzzy-matches an existing request (either pending or serving), this
indicates that the link layer cannot support the new request
concurrently, and we'll fail the new request with
TETHER_ERROR_DUPLICATE_REQUEST.
To keep track of serving requests, we'll store the request and it's
IpServer in RequestTracker when we call IpServer.enable(), and we'll
remove it (indexed by IpServer) when
1) Calling IpServer.onStop()
2) Calling IpServer.unwanted()
3) We detect an IpServer transition to AvailableState with error code
Bug: 216524590
Test: atest TetheringTest RequestTrackerTest TetheringManagerTest
Change-Id: I1e193f3595a48f806fb70fd08630a12ce2631a59
Quang Anh Luongcommited 2025-03-13 11:11:17 +09:00
Replace the explicit SDK_INT checks with the helper function
SdkLevel.isAtLeastB().
Bug: 216524590
Test: covered by existing tests
Change-Id: I32ae771d5b157d97dfbe3c37caf62e734eaa250e
Quang Anh Luongcommited 2025-03-11 17:16:56 +09:00
Currently there may be multiple identical bluetooth requests waiting for
the PAN service to connect before their listeners are notified. To
simplify future code, we should only allow one pending request/listener
pair at a time, and reject every subsequent request with
TETHER_ERROR_SERVICE_UNAVAILABLE.
This should be OK because
1) Bluetooth tethering is hardly used at all
2) Settings disallows extra startTethering calls between the first call
and the bluetooth service starting
3) Apps are expected to handle TETHER_ERROR_SERVICE_UNAVAILABLE
correctly.
Bug: 216524590
Test: atest TetheringTest
Change-Id: I8375d495575715f428e893316f7cd7e5a7ebba59
Quang Anh Luongauthored and Quang Luongcommited 2025-03-10 21:02:50 -07:00
This is a no-op refactoring which inline the functionalities
to IpServer, enabling subsequent changes to move
networkAddInterface part to ConnectivityService when the
tethering is enabled.
Test: atest TetheringTests:android.net.ip.IpServerTest
atest NetdStaticLibTests:com.android.net.module.util.NetdUtilsTest
Bug: 349487600
Change-Id: I6d0e5d349691df7a15bee852d5fd1dd19f5da6f6
This is a no-op, preparatory refactoring to isolate route
modification functionality, enabling subsequent changes to move
routing control to ConnectivityService.
Test: atest TetheringTests:android.net.ip.IpServerTest
atest NetdStaticLibTests:com.android.net.module.util.NetdUtilsTest
Bug: 349487600
Change-Id: I55af07968567b173dd9f97795600390439f1b927
Pending requests should be updated via a helper class RequestTracker
and stored in a Request wrapper object. This will help out with future
changes to associate each TetheringRequest with it's own
IIntResultListener and make it easier to gate behavior changes.
Bug: 216524590
Test: atest TetheringTest RequestTrackerTest
Change-Id: Ib867e91863bdf618bb0e955eeb529cd132209d77
Quang Anh Luongcommited 2025-03-06 15:18:28 +09:00
* changes:
no-op: use stopTetheringInternal when restarting tethering on start
Use pending request when legacy tethering
no-op: Add test to verify legacyTether does not use explicit request
Quang Luongauthored and Gerrit Code Reviewcommited 2025-03-04 02:25:35 -08:00
startTethering will sometimes restart tethering if there is an existing
request of the same type but with different contents. This call is
equivalent to stopTetheringInternal, so use that instead for simplicity.
Bug: 216524590
Test: covered by existing tests
Change-Id: I224c10557c2348e2d2f971e1e3ecb11ae346d2cf
Quang Anh Luongcommited 2025-03-04 16:58:43 +09:00
Legacy tethering was changed to use it's own tethering requests
with REQUEST_TYPE_LEGACY in aosp/3465235 instead of using the pending
request as it was thought that pending requests (from startTethering)
and legacy tethering would always be mutually exclusive.
However, pre-T Bluetooth tethering actually relies on
startTethering(request) to add the pending request, and then BT service
directly calls legacyTether(iface) to start tethering. Thus we should
continue to use pending requests even for legacyTether.
Bug: 216524590
Test: atest TetheringTest
Change-Id: I0aa7b5cc6d6d54f516a07b0e89259c61e1d05f69
Quang Anh Luongcommited 2025-03-04 16:58:42 +09:00
The tether_enable_sync_sm flag has been successfully rolled out
to public stage on Pixel devices without any observed
regressions. As a result, this flag should be enabled by default
with a kill switch, allowing the feature to be deployed to all
production devices.
Test: atest TetheringTests CtsTetheringTest
Change-Id: I2f0f55c1586e1f4987b28488082c4c1f4cae0f5e
Since the feature was fully rolled out via experiment without
regression, this commit removes the flag and the corresponding
logic in PrivateAddressCoordinator. The flag is no longer
necessary and simplifies the code.
Test: atest ConnectivityCoverageTests:PrivateAddressCoordinatorTest
Fix: 312647670
Change-Id: I8781f98b7e99ed0856e9e04112056df5adca2527
Add a TetheringRequest argument to enableTetheringInternal and
sendTetherResult so we can pass the request to Wifi in a later CL.
Also pass through for TETHERING_VIRTUAL to use the request and
interface directly.
Note that removing getOrCreatePendingTetheringRequest in
setVirtualTethering is also a no-op:
- If setVirtualTethering is called from startTethering, the request
that is now passed in as a parameter is the exact same one that
was just inserted into the pending list, and which the old code
would have obtained from getOrCreatePendingTetheringRequest.
- If setVirtualTethering is called due to an IP conflict, both the
old and the new code use a placeholder request with no interface.
This codepath was already broken before this CL (and likely has
never worked).
Bug: 216524590
Test: covered by existing tests
Change-Id: I3cb9b5ed44e83bb6bbf4ed77c37cbf35e306f08b
Quang Anh Luongcommited 2025-02-13 19:09:01 +09:00
enableTetheringInternal immediately sends the tether result for all
types except for TETHERING_BLUETOOTH, which relies on
setBluetoothTethering to sends the result immediately if the Pan
service is connected, or defer the result until after the Pan service
connects.
To keep better track of the active listeners and simplify the logic for
further listener behavior changes (i.e. notifying the listener after the
link layer event), refactor the bluetooth listener to be called
immediately within enableTetheringInternal if the Pan service is
connected like the other tethering types.
Bug: 216524590
Test: covered by existing tests
Change-Id: I91196e430b44ef2391de662ff0ed6e051b453d98
Quang Anh Luongcommited 2025-02-13 18:50:27 +09:00
Currently, WIFI_AP_STATE_CHANGED for LOHS will use any pending Wifi
TetheringRequest to start the IpServer. This is a bug, since pending
Wifi requests are always for tethered SoftAP, not LOHS. This means if
there's already a pending request for tethered SoftAP, we will
mistakenly use the tethered SoftAP request for LOHS. Then, when the
WIFI_AP_STATE_CHANGED event for the tethered SoftAP arrives, the pending
request for it will already be gone.
Fix this by always having LOHS use an implicit LOHS TetheringRequest
instead of taking the request from the pending list.
Bug: 216524590
Test: atest
Change-Id: Ic349e0b0688addf6a41b3de0528d444d716846a2
Quang Anh Luongcommited 2025-02-13 10:25:20 +09:00
If there are pending pan requests for an enable but a disable request
comes (or vice versa), remove all the pending requests and pre-emptively
fail their result listeners. This simplifies the logic and helps us
keep track of which request the future link layer event should be long
to.
Technically this is an app-visible behaviour change. In particular, if
something disables bluetooth tethering while the service is
disconnected and request(s) to enable tethering are queued, then the new
code will immediately send onTetheringFailed to all those requests,
whereas the old code would wait until the service connects, enable
tethering (and send the enabler an onTetheringStarted), and then disable
it. Given that this situation is very rare, and Bluetooth tethering is
itself so uncommon (<1% of total tethering sessions) this is an
acceptable trade-off.
Bug: 216524590
Test: atest TetheringTest
Change-Id: I061733d714894b741e7d686810dd39f054e85476
Quang Anh Luongcommited 2025-02-13 10:24:42 +09:00
Add a basic implementation of stopTetheringRequest that simply stops
tethering for that specific type if it is active, or fail with
TETHER_ERROR_UNKNOWN_REQUEST if not. In the future, we will do fuzzy
matching to ensure the correct request is removed.
Bug: 216524590
Test: atest TetheringManagerTest#testStopTetheringRequest
Change-Id: Ib4a660aacdb83e645e39ceb61b7cda45bb24d89d
Quang Anh Luongcommited 2025-01-31 16:23:04 +09:00
IpServer#enable is called with both a non-null TetheringRequest and the
requestedState, but the requestedState is derived from the
TetheringRequest's connectivity scope. Remove this requestedState arg
and simply have IpServer read the connectivity scope itself.
Bug: 216524590
Test: covered by existing tests
Change-Id: I73227f5053da3a2ab35563268fc416b6dd9b1801
Quang Anh Luongcommited 2025-01-30 14:30:51 +09:00
Currently the enableIpServing->tetherInternal call stack may have a
tethering request alongside a redundant tethering type and requested
state. The redundant arguments were necessary since there may be cases
where the active request is null (e.g. back-to-back start/stop, which
removes the active request before the link layer event enables ip
serving).
This change gets rid of the redundant arguments and makes the call stack
take a non-null TetheringRequest. In case the active request is not
found, we will create a placeholder request with just the type and
connectivity scope (i.e. requested state). This should be equivalent to
the old code of sending a null request (since none of the other fields
in TetheringRequest are used), making this a no-op change.
Bug: 216524590
Test: covered by existing tests
Change-Id: I5ac83c74f5bc4aec2fe85daa9477740749d95c63
Quang Anh Luongcommited 2025-01-30 14:30:49 +09:00
mActiveTetheringRequests is a misnomer because the requests aren't
actually active yet. Rename this to mPendingTetheringRequests since
they're pending a link layer event that the iface is ready to start IP
serving.
Bug: 216524590
Test: covered by existing tests
Change-Id: Ib0c4a52e0aa72fc27b67bce25187124b20082c05
Quang Anh Luongauthored and Lorenzo Colitticommited 2025-01-29 17:15:53 +09:00
The fact that the two overloads have the same name is confusing
because one of them fetches the type and one of them has it
passed in. This means it's not obvious whether they behave
identically or not.
This is a no-op refactor.
Bug: 216524590
Test: covered by existing tests
Change-Id: Iff7d2981cb5835831f00117166035d48b44a61a4
Lorenzo Colitticommited 2025-01-29 17:11:37 +09:00
Currently, the active TetheringRequest (if any) is fetched at the
very bottom of the stack, just before enabling the IpServer.
Have the callers pass it in instead.
This CL is a no-op refactor. In particular, it ignores the fact
that the TetheringRequest can be null, and that the connectivity
scope in the request might not match the requested state, etc. -
it just documents the current behaviour (bugs included) and
leaves it unchanged. It exists only to make future changes
easier.
Bug: 216524590
Test: covered by existing tests
Change-Id: Ie8af8b718a9de1f1d5adde0ac589060dce112a27
Lorenzo Colitticommited 2025-01-29 17:11:37 +09:00
There is no safe way to invoke this method correctly since the
package might not be installed for certain user type by OEM.
Thus, improve error handling and logging into WTF counter metrics.
Test: Manual:
1. Use internal main branch
2. Modify xml under vendor/google/data/etc/sysconfig to
configure tethering only installs on the SYSTEM user
3. Mock the device as entitlement required (ag/29664886)
4. Create a secondary user which has the permission to
enable tethering (go/hsum)
5. adb shell pm list packages --user 10 | grep tether
6. m statsd_testdrive && statsd_testdrive -e 979
7. Enable tethering
Test: atest TetheringTests:EntitlementManagerTest
Bug: 382628161
Change-Id: I233cad672e41d2b4687e53e61b93dcea9eb07817
Add TetheringRequest#RequestType to distinguish the type of
TetheringRequest (i.e. from startTethering, from implicit broadcasts, or
from the legacy tether API) as well as helper methods to create these
requests. These will be used in a future CL.
Bug: 216524590
Test: build
Change-Id: Ibfda48f59e80d423c9b6ee0d244cbdab14be1bd2
Quang Anh Luongcommited 2025-01-21 17:48:38 +09:00
Treehugger Robot
authored and
Android (Google) Code Review
commited 
Junyu Lai
commited 
Gerrit Code Review
commited 
Quang Anh Luong
commited 
Priyanka Advani (xWF)
commited 
Paul Hu
commited 
Patrick Rohr
authored and
Lorenzo Colitti
commited