StaticIpConfiguration objects are parceled at least as part of the
IpConfiguration objects that are passed to IEthernetManager when an
application sets static IP configuration on Ethernet.
Change-Id: I49991e2f591cc6cf01b503c18eb343b5929efe29
Lorenzo Colitticommited 2015-01-29 12:20:55 +00:00
setDomain() and toLinkProperties() were not setting the domains.
The setDomain() bug affected Wifi and I believe the toLinkProperties()
bug affected Ethernet and Bluetooth reverse-tethering.
(cherry picked from commit c53113b37f33c7ed19660c8ec5bfd578e8bb5409)
bug:18252947
Change-Id: I6235fcd6b875aee516efbb5f880db1a99380355b
Paul Jensenauthored and Lorenzo Colitticommited 2015-01-29 17:12:35 +09:00
In K and earlier, we would connect to a network where the gateway
was not covered by the subnet mask of the IP address. This is an
invalid configuration, but it used to work, and other OSes appear
to accept it too, so support it.
Bug: 19067207
(cherry picked from commit 2dfb79a54adeb4bcf1f62332a9db467fce302ced)
Change-Id: I80088f291466dbd5a47f360dcc1620acee5cf57e
Lorenzo Colitticommited 2015-01-28 20:36:37 +09:00
Most of this logic is simply removed from ConnectivityService.
The captive portal detection is now done by the NetworkMonitor.
The notification logic is still left in ConnectivityService as
it's used by both the NetworkMonitor and telephony's mobile
provisioning logic.
bug:17324098
Change-Id: Ibd1c42b1a75795f90a6483d3d0a5a14f88b193d8
Now that we support unreachable routes, use those to block
address families on VPNs. This is a much more elegant solution.
Also update LinkProperties when IP addresses are added and
removed, fixing a TODO.
Bug: 17462989
Change-Id: Ib749d84710dca70d672350b9f129bb91419ec77e
Lorenzo Colitticommited 2014-09-23 10:48:28 +09:00
The BT and Wifi mechanisms for enabling Tethering did their own
permission checks. This set of changes unifies the check into
a ConnectivityManager function so they can be kept in sync.
bug:17435527
Change-Id: I8c157a5acf56ffbddd349cb6a45160ae7be8541b
Robert Greenwaltcommited 2014-09-17 16:18:12 -07:00
Currently just valid/invalid based on NetworkMonitor findings.
Changed NetworkMonitor to start out in default state since starting in Offline causes
a spurious invalid report at creation time.
Added some logging.
bug:17395269
Change-Id: I9ae650b561834d8f8979033744d97df852e76df9
Robert Greenwaltcommited 2014-09-14 07:43:10 -07:00
HttpHandler and HttpsHandler classes have a lot of bug fixes baked into
them that the Network.openConnection() API should be using, for example
disabling SPDY support.
bug:17420465
Change-Id: I9f1472753a542d1dd6bffde3a60c37a9145098aa
Future HTTP requests could use an old socket that's bound to a different Network
causing unexpected results. DNS results could also not be appropriate.
bug:17283566
bug:17432215
Change-Id: I88b40b723c7b442000cafe8ce8b9d989d8995991
Network Factories are allowed to go below, but networks need to be
constrained. Allowing the network to go below 0 meant that -1 could
sometimes leak through and foul the logic.
The core of 17361330 will be fixed when we stop sending scores for
listens to NetworkFactories, but it exposed this issue too. Summary:
1 - add a network listener. This isn't a request so it's not sent
to networks.
2 - alter your score (ethernet sets score to -1 when the link goes
down) (16:07:39.782)
3 - a bug in ConnectivityService causes score changes to get sent for
all network requests and network listeners causing NetworkFactories
to no see 2 entities. This bug will be fixed by a pending change
(https://googleplex-android-review.googlesource.com/#/c/540840/).
This causes the ethernet NetworkFactory to see two entities, both
served by networks of score -1. (16:07:39.989)
4 - disconnect Ethernet - this only sends 0 scores for known
requests, not network listeners. Had it been sent for both entities
they both would have evaluated that the networkfactory score (-1)
was lower than the request score (0) and both released their
refcount. (16:08:03.147)
5 - this means the listener is tracked by the EthernetNetworkFactory
with a score of -1 while the factory itself has a score of -1 so the
network release isn't called.
bug:17361330
Change-Id: Ife34ca0f9c233dd3c3df80f6fea580af43afcdeb
Robert Greenwaltcommited 2014-09-10 10:39:37 -07:00
Using reflection you could do this and it would crash the system.
Thanks, ServiceFuzzer!
bug:17379629
Change-Id: I8b470bda78a69761ccd92496746f5d295b5d07f2
Robert Greenwaltcommited 2014-09-03 20:57:41 -07:00
This constructor does nothing, including doing nothing with its
only argument. This causes it to return a NetworkInfo for
TYPE_MOBILE no matter what was passed in.
Bug: 16610051
Change-Id: I4ccd5ec050f7824fb06496c00fcd7901defeb7bd
Lorenzo Colitticommited 2014-08-29 18:34:49 -07:00
If we don't do this, per-network HTTP requests will go over the
wrong network if any previous HTTP request was made by the same
app on another network.
Bug: 17300006
Change-Id: I1854c16dee6adb9e81fb12b097577439d69a644e
Lorenzo Colitticommited 2014-08-29 18:13:19 -07:00
This makes tethered clients use the correct DNS servers when
tethering to non-default networks like the DUN APN.
Bug: 16357676
Change-Id: I8933b6de198a92c2aaf0291931ace8966ddba275
Lorenzo Colitticommited 2014-08-29 10:21:58 -07:00
This reverts commit e0101cd and removes the related NetworkMonitor code.
The thinking is the broadcasts are not robust enough as they rely on apps
working together and are not sufficiently tested.
bug:17115050
Change-Id: I433032867cc4fea7191a1b13842b16825dc74df4
-The ability to launch VPNs is now sticky; once approved by the user,
further approvals are not needed UNLESS the connection is revoked in
Quick Settings.
-The old persistent notification has been removed in favor of the new
Quick Settings UI.
-The name of the VPN app is now pulled from the label of the VPN
service rather than the app itself, if one is set.
Bug: 12878887
Bug: 16578022
Change-Id: I102a14c05db26ee3aef030cda971e5165f078a91
LinkProperties can represent way more complicated configurations
than what we can actually apply to interfaces. This makes it
error-prone to use it to represent static configuration, both
when trying to apply configuration coming from LinkProperties
and when trying to save configuration from current
LinkProperties.
Instead, move static configuration (IPv4 only, since we don't
support static IPv6 configuration) into a separate
StaticIpConfiguration class.
Bug: 16114392
Bug: 16893413
Change-Id: Ib33f35c004e30b6067bb20235ffa43c247d174df
Lorenzo Colitticommited 2014-08-19 11:59:43 -07:00
Add logic to obtain the mtu from the network PCO parameter and set it to kernel
when the mobile data connection is established. When there is no PCO mtu configured
from the network, the mtu size defined in the corresponding APN will be used. In case
no mtu size is defined for an APN used for data connection, the MCC/MNC based MTU
defined in the framework overaly will be applied.
bug:17046179
Change-Id: I6465d4b8f2076aaa380ae3617fb3f24adbe136d4
w19976authored and Robert Greenwaltcommited 2014-08-14 20:34:13 -07:00
This addresses a TODO and also makes it possible to create
routes to destinations that are not valid LinkAddresses, such as
multicast addresses.
Bug: 16875580
Change-Id: Id4c77b00dc3064bf27d78cdcbbe035e645748cfe
Lorenzo Colitticommited 2014-08-13 21:17:20 +09:00
Some devices use clatd for catching raw IPv4 traffic when running on
a pure-IPv6 carrier network. In those situations, the per-UID
stats are accounted against the clat iface, so framework users need
to combine both the "base" and "stacked" iface usage together.
This also means that policy rules (like restricting background data
or battery saver) need to apply to the stacked ifaces.
Finally, we need to massage stats data slightly:
-- Currently xt_qtaguid double-counts the clatd traffic *leaving*
the device; both against the original UID on the clat iface, and
against UID 0 on the final egress interface.
-- All clatd traffic *arriving* at the device is missing the extra
IPv6 packet header overhead when accounted against the final UID.
Bug: 12249687, 15459248, 16296564
Change-Id: I0ee59d96831f52782de7a980e4cce9b061902fff
If Socket.connect() times out, the socket cannot be used any
more - any attempt to do so fails with EBADF. Use a new
socket for each IP address.
Bug: 16664129
Change-Id: If3616df86f7c2da0eabd30dca5db65d0da85cb17
Lorenzo Colittiauthored and Paul Jensencommited 2014-07-30 17:31:04 +00:00
Starting with startUsingNetworkFeature and stop.
Figure it's easier to code review incremental changes.
Change-Id: I19aee65e740858c3a9a2a1a785663f6fee094334
Robert Greenwaltcommited 2014-07-28 11:34:36 -07:00
Bypassable VPNs grab all traffic by default (just like secure VPNs), but:
+ They allow all apps to choose other networks using the multinetwork APIs.
If these other networks are insecure ("untrusted"), they will enforce that the
app holds the necessary permissions, such as CHANGE_NETWORK_STATE.
+ They support consistent routing. If an app has an existing connection over
some other network when the bypassable VPN comes up, it's not interrupted.
Bug: 15347374
Change-Id: Iaee9c6f6fa8103215738570d2b65d3fcf10343f3
It was calling into dead ConnectivityService code rather than using
the new ConnectivityManager shim code.
bug:15221541
Change-Id: I1e3eea8a658a162ce36673ed1cf7b1e7e4372c42
Robert Greenwaltcommited 2014-07-24 14:39:51 -07:00
ConnectivityManager.requestNetwork pass TYPE_NONE to
sendRequestForNetwork which prevents it from being used with legacy API
requestRouteToHostAddress. This CL infers the legacy network type
automatically from the network capabilities.
b/16324360
Change-Id: I591d38f875f42f56e8cfc157db2069c9eee0ee26
Lorenzo Colitti
commited 
Paul Jensen
authored and
Neil Fuller
commited 
Robert Greenwalt
commited 
Android (Google) Code Review
commited 
Ang Li
commited 
Jason Monk
commited 
Jeff Davidson
commited 
w19976
authored and
Jeff Sharkey
commited 
Dan Sandler
commited 
Sreeram Ramachandran
commited 
Ye Wen
commited