Removing "mWifiTetherRequested" because it might cause Wi-Fi tethering
to not have an upstream if P2P is turned on. The issue could be
recovered when the upstream's capabilities or link properties change,
tethering calls "chooseUpstreamType" to select an upstream. If none of
the above situations happen, Wi-Fi tethering won't have an upstream.
1. When Wifi P2P is enabled and tethering enters TetherModeAliveState.
2. Turning on wifi tethering, TetherModeAliveState would first receive
EVENT_IFACE_SERVING_STATE_INACTIVE when wifi tethering's IpServer
is created and enters IpServer's InitialState. Then it will call
updateUpstreamWanted and change mUpstreamWanted from false to true
before wifi tethering's IpServer actually enters TetheredState.
3. When TetherModeAliveState receives EVENT_IFACE_SERVING_STATE_ACTIVE,
which is triggered by wifi tethering's IpServer entering
TetheredState, it won't call chooseUpstreamType() because
mUpstreamWanted is already true.
case EVENT_IFACE_SERVING_STATE_ACTIVE: {
IpServer who = (IpServer) message.obj;
if (VDBG) Log.d(TAG, "Tether Mode requested by " + who);
handleInterfaceServingStateActive(message.arg1, who);
who.sendMessage(IpServer.CMD_TETHER_CONNECTION_CHANGED,
mCurrentUpstreamIfaceSet);
// If there has been a change and an upstream is now
// desired, kick off the selection process.
final boolean previousUpstreamWanted = updateUpstreamWanted();
if (!previousUpstreamWanted && mUpstreamWanted) {
chooseUpstreamType(true);
}
mWifiTetherRequested is only used to check upstreamWanted() and only be
used in TetherModeAliveState so that it is
safe to remove mWifiTetherRequested and always use mForwardedDownstreams
to check whether upstream is needed for TetherModeAliveState because all
the Tethered IpServer is added to mForwardedDownstreams when it enter
Tethered State and be removed from mForwardedDownstreams when it exit
Tethered State.
This change also move the upstreamWanted() function inside TetherMainSM
to prevent it from being used incorrectly outside of TetherMainSM.
Bug: 329552689
Test: atest TetheringTests
Change-Id: I6842170f455b280dd79aae039a1117d5e6d677f3
If P2P is enabled first then turn on wifi tethering, it doesn't have
upstream.
Bug: 329552689
Test: atest TetheringTests
Change-Id: Ia39031167a3cf7751ae549ea5ce147cb9cb87607
This CL is created as a best effort to migrate test targets
to the new android ownership model. If you find incorrect or unnecessary
attribution in this CL, please create a separate CL to fix that.
For more details please refer to the link below,
<add g3 doc link>
Bug: 304529413
Test: N/A
Change-Id: I243f17b3f0ad7af9ffa15ca242456e36688733f5
Merged-In: I243f17b3f0ad7af9ffa15ca242456e36688733f5
The logic is currently disabled by default, adding a flag so
that we can compare result with A/B rollout. Tethering only read
this flag once when it is created.
Bug: 319212113
Test: atest TetheringTests
Change-Id: I656b0389e56d29dd691738ee3abfa6418746846f
This reverts commit cf11be9eb2.
Reason for revert: avoid some IpServer(s) running the new sync state machine while others use the async state machine.
Bug: 319212113
Change-Id: Ib086a7ccd102f38e579c79f94aceae9971f1853a
Mark Chienauthored and Markcommited 2024-01-22 11:34:14 +00:00
This change includes:
1. Refactor the logic in Tethering#dump into utils class.
2. Move the utils class to a common place which could be referenced
from other sub-modules.
3. Add @MonitorThreadLeak annotation to enforce
there is no thread leak problem.
Test: atest FrameworksNetTests NetworkStaticLibTests
Test: atest ConnectivityCoverageTests:com.android.networkstack.tethering.TetheringTest#testDumpTetheringLog
Test: adb shell dumpsys tethering (with hardcoded exception)
Fix: 312669345
Change-Id: Ia6fdfeeec2110afa0ec9e056e9db3843748845c3
The logic is currently disabled by default, adding a flag so
that we can compare result with A/B rollout.
Test: atest TetheringTests
Change-Id: If640b9a172b97aa67c49b2976cdef118218f1e0f
This fix the code review comment from aosp/2319853 that getXXX functions
should be renamed to makeXXX because it's actually creating the object.
Test: TH
Change-Id: Ife8e1cc3a90b835764a2dd9731388b05d8a5c964
Markauthored and Mark Chiencommited 2023-12-04 09:02:55 +00:00
Currently, PrivateAddressCoordinator always selects the /24 prefix
from the 192.168.x.x/16 range first. If the upstream is also a /24
prefix in the 192.168.x.x/16 range, there's a 1/256 chance of a
conflict (192.168.0.x/24 ~ 192.168.255.x/24). Since 192.168.x.x/16
is a popular range for home and small business networks, we should
randomize the starting prefix range to reduce the chance of a
conflict. The /8, /12, and /16 range selection rates are 0.39%,
5.86%, and 93.7%, respectively (see the inline comments for how
the rates are calculated).
The chance of selecting a /24 prefix is:
- 10.0.0.0/8: 1/(256*256) * 93.7% = 0.001429%
- 172.16.0.0/12: 1/(16*256) * 5.86% = 0.00143%
- 192.168.0.0/16: 1/256 * 0.39% = 0.001523%
Note: This change is currently turned off by the
tether_force_random_prefix_base_selection flag. We'll run experiments
to make sure tethering stays reliable with this change enabled.
Bug: 312647670
Test: atest TetheringTests
Change-Id: Iea03fdcf0fccad95410e79ae87fcb046d75da457
Instead of passing state machine to UpstreamNetworkMonitor, wrapped it
by an interface would have two benefits:
1. Easier for testing.
2. Isolate state machine operation in callback.
Test: atest TetheringTests
Change-Id: I2a97fd5cbc8c49df8c3c98428c6570916ab31ea5
1. assertEquals syntax is (expected, actual) and not the other way
around
2. use assertArrayEquals to compare arrays
Test: atest TetheringTests
Bug: 312072637
Change-Id: I5eb0c270323253f648d3a8fd488506b9ad1ca6a1
TetherUpstream6Key#src64 should be stored in network order. Use
a big-endian ByteBuffer to retrieve a value stored in network order
is actually converts it into native order, which is little-endian in
Android.
In this CL, we changed it to use byte[] instead of long to store the
top 64-bits of the source prefix.
Test: atest TetheringTests
manual test with IPv6-only tethering upstream, check BPF stats.
Bug: 312072637
Change-Id: I79f9282d5eda28328aa6a764ea92b086d6285133
Preparing for refactor of IpServer and BpfCoordinator. All BPF related
code are planned to migrate from IpServer to BpfCoordinator. This CL
moves BPF related tests from IpServerTest to BpfCoordinatorTest first.
Test: atest TetheringTests
Bug: 294025403
Change-Id: I000f27c463368202dbbe2ace188c8c5146669096
This reverts commit 55ccfe19e2.
Reason for revert: this must be introducing some sort of race
it appears to cause
atest EthernetTetheringTest 'NetdBinderTest#TetherForwardAddRemove'
to no longer reliably pass.
Change-Id: I5281ab3f42c5ce268d97a12db24a6768db3f4354
Maciej Żenczykowskiauthored and Gerrit Code Reviewcommited 2023-10-28 02:10:52 +00:00
BPF needs upstream prefixes information to filter spoofing IPv6 source
addresses carried in downstream traffic.
We retrieve prefixes from upstream interface's LinkProperties and pass
it to the BpfCoordinator. Forwarding rules will also be updated when
upstream interface's IPv6 link addresses change.
Test: atest TetheringTests
Bug: 261923493
Change-Id: If8cfc3b191e520ca838654d1b5211ab9e9ec021d
As state transitions always occur after a message has been processed,
calling transitionTo only under processMessage makes the flow easier
to understand and less error-prone.
The risk of this change is very minimal since it is only about
handling the error, but tethering will stop regardless.
Test: atest TetheringTests
Change-Id: I56c6cf6cc989464ee84a8333ac131afc808a3d95
This can make it easier to adopt SM shim replacement in follow up change,
as both SyncSM and AsyncSM will process the same message without any
difference.
This change also fix a problem that bring up downstream before it's
IpServer completely disabled.
Previous:
CMD_NOTIFY_PREFIX_CONFLICT -> requestEnableTethering(false) ->
requestEnableTethering(true) -> IpServer stopped ->
reportTetherStateChanged(downstream inactive) -> IpServer started
-> reportTetherStateChanged(downstream active)
New:
CMD_NOTIFY_PREFIX_CONFLICT -> requestEnableTethering(false) ->
IpServer stopped -> reportTetherStateChanged(downstream inactive)
-> requestEnableTethering(true) -> IpServer started
-> reportTetherStateChanged(downstream active)
Test: atest MtsTetheringTestLatestSdk
Change-Id: Ibe22b300c56125359f4fa452bd01a0a2381fda23
When tethering restarts due to an IP conflict, it starts to
bring up downstream before its IpServer is completely disabled.
Test: atest TetheringTests
Change-Id: I0b0f0bf1bb9ac8421c05fe512d5082d095fa7180
The problem is that the test releases mHotspotIpServer’s prefix before testing mUsbIpServer, which means that mUsbIpServer might choose the same address as mHotspotIpServer’s.
To fix this, we need to test that mUsbIpServer and mHotspotIpServer have different addresses before calling releaseDownstream(mHotspotIpServer).
Change-Id: Id7f7bbfeda841ec9b97e24c0f11893fa37b9ef54
Test: TH
Bug: 300127195
A initial test for SyncStateMachine, will add more tests in the
following changes.
Test: atest SyncStateMachineTest
Change-Id: Ie6dbbe22bfef40b1675d50243d14d0a235df1e3a
Currently, Ipv6UpstreamRule is added follows the adding of
Ipv6DownstreamRule when it is the first rule from a downstream
interface to the upstream interface.
This CL changed it to:
1. Upstream interface change updates both IPv6 upstream and downstream
forwarding rules.
2. Neighbor events updates only IPv6 downstream forwarding rules.
Data limit setting on the upstream interface is now depend on the
upstream rules instead of the downstream rules. This CL also updates
corresponding test cases in IpServerTest and BpfCoordinatorTest.
Test: atest TetheringTests
Bug: 261923493
Change-Id: I5b4df64a3d276afb7a24bbef3a0432f53377e8b2
This CL also updates not to use isTetheringFeatureEnabled for
TETHER_FORCE_UPSTREAM_AUTOMATIC_VERSION which is wrongly configured in
Connectivity namespace.
Test: m
Bug: 279108992
Change-Id: If4f3a57c749bbaeb85454c31248c5bc5feaab936
In current code, IpServer will ensure bpf offload is supported before
calling BpfCoordinator's APIs. But those APIs already have the same
checks inside the function. This CL removed duplicated checks in
IpServer.
After this change, the BPF offload support status is only determined
inside BpfCoordinator and it won't change during the life cycle of
Tethering. Tethering initializes mBpfCoordinator just once in the
constructor. After that point, the value of isUsingBpf can never
change, because mIsBpfEnabled is final and
mBpfCoordinatorShim.isInitialized() is either always true (api30) or
can either never change (api31).
Also fixed a bug in IpServerTest upon this change.
Test: atest TetheringTests
Bug: 261923493
Change-Id: I50f231a83bf678b90eae4fd9bfa6035e86978bb3
Replaced startUpstreamIpv6Forwarding and stopUpstreamIpv6Forwarding
with add/remove Ipv6UpstreamRule. This is a preparation for following
CLs which will pass the upstream's prefixes to the bpf map. We might
have more than one upstream rules.
Also renamed Ipv6ForwardingRule to Ipv6DownstreamRule since we have
defined the Ipv6UpstreamRule.
No logic changes are being made in this CL.
Test: atest TetheringTests
Bug: 261923493
Change-Id: I022f97c2daf468bbd4a4279a069ccf498013e7e7
This patch is based on aosp/2535559 from maze@.
Add source prefix into the upstream key such that only packets which
source IPv6 address matches it will be forwarded to the upstream
interface.
In this patch, the source prefix is set to zero so there is no
behavior changes. Next CL in patch series will use the real source
prefixes retrieved from upstream interface.
Test: atest TetheringTests
Bug: 261923493
Change-Id: I43d068a29b937c7dfeb6fab632a8effb47ee2263
Mark Chien
commited 
Aditya Choudhary
commited 
Gerrit Code Review
commited 
Junyu Lai
commited 
Treehugger Robot
authored and
KH Shi
authored and
Chalard Jean
commited 
Maciej Żenczykowski
authored and
Motomu Utsumi
commited