Make Proxy.validate() return valid/invalid int code, instead of throwing
exceptions. If invalid, detailed reason code is returned (currently for
Settings UI use).
bug: 13248097
Change-Id: Ic68d03f666f1cd63667afc311de7dc370d233901
Also add new API for determining whether the current data network
is active, and thus better scheduling network operations. This
API is designed to not be tied to a mobile network -- regardless
of the network, apps can use it to determine whether they should
initiate activity or wait. On non-mobile networks, it simply always
reports as the network being active.
This changed involved reworking how the idle timers are done so
that we only register an idle timer with the current default
network. This way, we can know whether we currently expect to
get callbacks about the network being active, or should just always
report that it is active. (Ultimately we need to be getting this
radio active data from the radio itself.)
Change-Id: Iaf6cc91a960d7542a70b72f87a7db26d12c4ea8e
The calling package name will be used to check if an application is a
system application when deciding if a route should be exempt from VPN
routing rules.
Bug: 12937545
Change-Id: I2c09c875fe9bb9685871a0a801ddcbb32fc17405
Add new RIL commands and generic code cleanups.
The only changes required for OMA DM support are the
addition of five new methods in ITelephony.aidl for
reading/writing NV items and performing NV config and
radio resets (requires MODIFY_PHONE_STATE), along with
the new RIL request IDs in RILConstants.java.
Bug: 12864208
Change-Id: I958d2571580d98a49936ef2e6822e5ac086acbe2
This is necessary so that the framework can know whether an IPv6
address is likely to be usable (i.e., if it's global scope and
preferred). Also, it will simplify the address notification
methods in INetworkManagementEventObserver, which currently take
the address, the flags, and the scope as separate arguments.
1. Add flags and scope to the class and update the unit test.
Use the IFA_F_* and RT_SCOPE_* constants defined by libcore.
Since most callers don't know about flags and scope, provide
constructors that default the flags to zero and determine the
scope from the address. Addresses notified by the kernel will
have these properly set. Make multicast addresses invalid.
Update the class documentation.
2. Provide an isSameAddressAs() method that compares only the
address and prefix information between two LinkAddress
objects. This is necessary because an interface can't have
two addresses with the same address/prefix but different
flags.
3. Update LinkProperties's addLinkAddress and removeLinkAddress
to identify existing addresses to add/remove using
isSameAddressAs instead of implicit equals(). Specifically:
- If addLinkAddress is called with an address that is already
present, the existing address's flags and scope are updated.
This allows, for example, an address on an interface to go
from preferred to deprecated when it expires, without it
having to be removed and re-added.
- If removeLinkAddress is called with an address that is
present but with different flags, it deletes that address
instead of failing to find a match.
4. Update the INetworkManagementEventObserver address
notification methods to take just a LinkAddress instead of
LinkAddress, flags, and scope. While I'm at it, change the
order of the arguments for consistency with the other
functions in the interface.
Change-Id: Id8fe0f09a7e8f6bee1ea3b52102178b689a9336e
Lorenzo Colitticommited 2013-12-06 13:54:35 +09:00
1. Simplify the parceling code. Since the InetAddress inside a
LinkAddress can never be null, we don't need to special-case
the case where it is.
2. Add / update method documentation.
3. Write a unit test.
Change-Id: Iba0a8cecc683d55d736419965e72ee33dd66dc22
Lorenzo Colitticommited 2013-12-03 19:46:36 +09:00
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
bug:11598568
Change-Id: Idff5ae81119d8143da096b5291ecbfbc5875cbd4
Raj Mamadgiauthored and Robert Greenwaltcommited 2013-11-14 00:08:21 +00:00
b/11598568
Adding validation for Global Proxy setting before it is
being set.
Proxy is validated at the boot time also to make sure
the value set is valid.
Change-Id: Ib93d24a80af1a329694f07c47bd81dfcc1e1b874
Signed-off-by: Raj Mamadgi <rmamadgi@sta.samsung.com>
Raj Mamadgiauthored and Ankit Somanicommited 2013-11-12 21:14:02 -05:00
Note that this CL does not change any behaviour.
At the center of this change is
CaptivePortalTracker#detectCaptivePortal(), which does nothing
except call back into ConnectivityService. Removing it allows us to
simplify code in ConnectivityService. It also allows us to remove
ConnectivityService#captivePortalCheckComplete which was only ever
called in response to this method.
While this does not change any behaviour, it preserves existing
bad behaviour, i.e, that the CAPTIVE_PORTAL_CHECK NetworkInfo
state does not correspond to actual captive portal detection.
We transition into that state and immediately (and unconditionally)
out of it and into CONNECTED.
Change-Id: Ib3797f956d2db5e3cacaaa53e899d81aa8e958af
Hold the right lock while copying info from another
NetworkInfo object to prevent changes being made to it
while the copy is in progress.
Change-Id: I1aa2c29e81e045b0359f957352c438e79e692823
Changes the PacManager to report message back to ConnectivityService
to send a broadcast once the download has completed. This allows the
ConnectivityService to store the correct proxy info for getProxy().
This made the problem arise that ProxyProperties was not handling port
while it had PAC. Added small fix for equals() and parcelization.
The combination of these fixes seems to resolve Bug: 11028616.
Bug: 11168706
Change-Id: I92d1343a8e804391ab77596b8167a2ef8d76b378
This changes the PAC support to not broadcast the Proxy information until
the Local Proxy has started up and successfully bound to a port so that
the local proxy information can be guaranteed to be owned by the proxy.
Bug: 10459877
Change-Id: I175cd3388c758c55e341115e4a8241884b90d633
netd now tracks statistics for tethered interfaces across tethering
sessions, so switch to asking for all tethering stats. (Currently
we're double-counting all tethering data, ever since it started
tracking across sessions.)
Also catch OOME to handle corrupt stats files, which we then dump to
DropBox and then start over.
Bug: 5868832, 9796109
Change-Id: I2eb2a1bf01b993dd198597d770fe0e022466c6b9
Added a hidden API under ConnectivityManager to toggle airplane mode.
This may be a temp solution for b/10653570.
bug:10653570
Change-Id: I0b2b42230073289eb8dc6891317d62b84e26c133
Able to config network specific MTU size. Normally, the default size of MTU is 1500.
US - ATT 1410, TMUS 1440, SPRINT 1422
KR - SKT 1440, KT 1450, LGU+ 1428
JP - KDDI 1420, SoftBank 1340
CA - RGS 1430, FIDO 1430, MTS 1430, BELL 1358, SaskTel 1358
AU - TEL 1400
Bug: 10195070
Change-Id: Ie18650b37a3d44af944f2dae4aa97c04fb12cd5e
sy.yunauthored and Robert Greenwaltcommited 2013-09-06 15:26:19 -07:00
I'd changed DetailedState to force ConnectivityService to treat
provisioning apn's specially. In particular so that they wouldn't
be identified they were fully connected until the provisioning
actually started. The problem is that DetailedState is a public enum
that has a CTS test and just changing the CTS to allow for the new
state (CONNECTED_TO_PROVISIONING_NETWORK) was inappropriate.
Instead I've added a new mIsConnectedToProvisioningNetwork variable
and used the DetailedState.SUSPENDED as the intermediate state.
Bug: 10620248
Change-Id: Id4a842398cad67455541ce629959351c27d83639
This change renames the LinkInfo objects to LinkQuailtyInfo. The API is
still hidden; but it can be accessed via reflection.
Bug: 10342372
Change-Id: Ieccea87c467ceae5d7f76298b137573f67396cd6
When a sim is new or it has expired it needs to be provisioned
with the carrier. Basically provisioning is associating a sim with
a user account. When a sim isn't provisioned then operators will
restrict access to the network and only allow certain addresses
or services to be used.
This set of changes allows two types of provisioning networks to be
recognized. The first is a network that causes all DNS lookups to be
redirected to a different address than was intended. This is exemplified
by how T-Mobile works.
The second technique uses a special apn for provisioning. An example is
AT&T where lwaactivate is the provisioning apn and broadband is the
normal apn. We first try broadband and if we are unable to connect we
try lwaactivate. When we see the activate we identify it as special and
the ApnContext.isProvisioningApn will return true.
In the future our plan is to create a new network type that can be added
to the apn list, but for now it identified by name.
Here is a list of significant changes:
- CaptivePortalTracker now only test WiFi networks instead of all networks
- checkMobileProvisioning checks for provisioning networks and doesn't
try to ping.
- IConnectivityManager.aidl changes:
* getProvisioningOrActiveNetworkInfo was added to and used by Manage
mobile plan in WirelessSettings so even when there is no active
network it will still allow provisioning. Otherwise it would report
no internet connection.
* setSignInErrorNotificationVisible is used by both
CaptiviePortalTracker and checkMobileProvisioning so they use the
same code for the notifications.
* checkMobileProvisioning was simplified to have only a timeout as
returning the result is now harder as we abort simultaneous call
otherwise we'd could get into loops because we now check every time
we connect to mobile.
- Enhanced MDST to handle the provisioning network.
- Added CONNECTED_TO_PROVISIONING_NETWORK to NetworkInfo to make a new
state so we don't announce to the world we're connected.
- TelephonyIntents.ACTION_DATA_CONNECTION_CONNECTED_TO_PROVISIONING_APN
is sent by the low level data connection code to notify Connectivity
Service that a provisioning apn has connected. This allows CS to
handle the connection differently than a normal connection.
Bug: 10328264
Change-Id: I3925004011bb1243793c4c1b963d923dc2b00cb5
This change starts tracking traffic quality data for WiFi and mobile
networks. The quality is tracked based on incidental traffic, and not
on specific measurements. Theoretical bandwidths are hard-coded, as
well as sampling interval; although sampling interval can be changed
by setting a system policy.
Bugs filed to remove shortcomings of this change -
10342372 Change LinkInfo name to something better
10342318 Move hardcoded values of MobileLinkInfo to resources
so they can be updated without changing code
Bug: 10006249
Change-Id: I83d8c7594da20fe53abbd5e1f909b1f606b035bb
1. Make addLinkAddress a no-op if the address already exists.
2. Make addLinkAddress, addStackedLink and removeStackedLink
return a boolean indicating whether something changed.
3. Add a removeLinkAddress method (currently there is no way of
removing an address).
3. Move hasIPv6Address from ConnectivityService to
LinkProperties, where it belongs.
Bug: 9625448
Bug: 10232006
Change-Id: If641d0198432a7a505e358c059171f25bc9f13d5
Lorenzo Colitticommited 2013-08-20 21:16:37 +09:00
Ashish Sharma
commited 
Yuhao Zheng
authored and
Android (Google) Code Review
commited 
Dianne Hackborn
commited 
Chad Brubaker
commited 
Jake Hamby
commited 
Hui Lu
authored and
Android Git Automerger
commited 
Lorenzo Colitti
authored and
Gerrit Code Review
commited 
The Android Open Source Project
commited 
John Spurlock
commited 
Robert Greenwalt
authored and
Raj Mamadgi
authored and
Ankit Somani
commited 
Narayan Kamath
commited 
Jason Monk
commited 
Jeff Sharkey
authored and
Ying Wang
commited 
sy.yun
authored and
Wink Saville
authored and
Vinit Deshapnde
authored and