Multiple enterprise slice can be setup within single user profile based
on different uids. So do not remove profile network preference with same
user profile but with different uids
Bug: 229644102
Test: manual system test and ConnectivityServciceTest
Change-Id: I897b643e01240958fff575de9e15182069efc698
isMangedProfile returns true for managed profiles.
But enterprise device can be fully managed like device owner.
Hence check specifically if request is coming on fully managed
device.
Bug: 226966328
Bug: 231071836
Test: ran DevicePolicyManager CTS and ConnectivityServiceTest
Change-Id: I7827466bd61e24ba9c36c3a2e25043257e2ed602
(this is safe because on pre-T none of these maps and programs are mainlined
and thus safe to access from mainline code anyway)
Test: TreeHugger, manual
Bug: 218408035
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Change-Id: I23e565d665247f33e084978890a1ee8ffe0fe568
Maciej Żenczykowskicommited 2022-04-23 09:03:06 +00:00
- For clatd start and stop, use ClatdCoordinator on T+ and Netd on S-
- Fix the unit test for T+ and S- devices
Note that mokito.verify(.., times(1)) is replaced by verify(..)
because times(1) is the default and can be omitted.
See verify in mockito/src/main/java/org/mockito/Mockito.java
Note that this commit needs to be merged with aosp/1956072.
Bug: 212345928
Test: atest FrameworksNetTests
manual test
1. Connect to ipv6-only wifi.
2. Try IPv4 traffic.
$ ping 8.8.8.8
3. Check bpf entries are added
4. Disconnect from ipv6-only wifi.
5. Check bpf entries are removed
6. testipv4.com shows 10/10
Change-Id: I7dfda6eec19de94e4258971effcd8a1210542473
A UID can be a concatenation of a UserID with a 5 digit package UID.
E.g., Bluetooth under User10 would have UID 1001002. This CL removes the
UserID (if any), before checking against BLUETOOTH_UID.
Bug: 228598338
Test: m
Change-Id: I532583345cc9ab474fc848a3ede6be9d8be9c5b0
This ensures that bluetooth can register bluetooth tethering
NetworkAgents without having to make NETWORK_FACTORY a privileged
or role permission.
Test: m
Bug: 221949454
Change-Id: I24a5da444b10dde740c1e449c8630de56946d4e1
Lorenzo Colitticommited 2022-04-06 11:15:12 +09:00
setUnderlyingNetworks() is mainly for the NetworkAgents who hold
the NETWORK_FACTORY to set its underlying networks.
And the underlying networks are only visible and useful for the
caller of getNetworkCapabilities() or the receiver of
onCapabilitiesChanged() who hold one of NETWORK_FACTORY,
NETWORK_SETTINGS and MAINLINE_NETWORK_STACK permissions.
Otherwise, the underlying networks field will be cleard before
sending.
Bug: 205738644
Test: atest CtsNetTestCases:ConnectivityManagerTest
atest CtsHostsideNetworkTests:HostsideVpnTests
atest FrameworksNetTests
Change-Id: Ife7630d9676a31ee5ab977cb1b87aec3b6fd7080
This change allows callers with the NETWORK_STACK or
PERMISSION_NETWORK_STACK to receive administrator UIDs. This will be
used by the VCN to ensure that administrator UIDs are accurately
populated, ensuring that the ConnectivityDiagnostics are triggered for
the VCN.
Bug: 193204385
Test: atest ConnectivityServiceTest
Change-Id: I3ecfbef6847dcc78adac05d0229719c97e3a220c
In some scenarios, Wi-Fi connectivity is disrupted after roam. If an application reacts to network errors by calling reportNetworkConnectivity(false), validation will immediately fail and the device will switch to cell data.
Add a way to ignore these validation failures for up to 10 seconds after Wi-Fi roams.
Bug: 216567577
Test: new unit tests
Change-Id: I58de486533bcc7c6e32b23536ae15bccb779e394
* changes:
Fix the NPE thrown when starting Ethernet service in OS lower than T.
Remove the stub ethernet service from Connectivity module.
Update hidden API files for EthernetManager API move.
Provide a stub ethernet service to build in sc-mainline-prod.
Build ethernet framework source into framework-connectivity-tiramisu
Patrick Rohrauthored and Gerrit Code Reviewcommited 2022-03-16 16:03:30 +00:00
Use int array for included and excluded uids so that uses
same data type as in PreferentialNetworkServiceConfig
Bug: 217365439
Test: ran connectivity service unit tests
Change-Id: I9ac7e6498df2fd20b8397b2c110296e019c7389e
This is useful for link layers that disconnect but know they will
reconnect to a similar network soon, and do not want the device
to switch to another network until the reconnect happens. An
example is wifi switching to another network that is on a
different subnet without the device switching to cellular data.
This works by immediately destroying the network, so the link
layer can reuse the same interface name for the new network. It
would be possible to delay destroying the network until the new
network connects, but in practice this does not seem useful,
because the if the link layer reuses the interface, then the
interface will be undergoing reconfiguration, and will likely
not be usable for app traffic.
This CL also moves the call to onNetworkDestroyed into
destroyNativeNetwork. This is needed to ensure that the new
API calls onNetworkDestroyed even though most teardown
operations have not happened. This causes onNetworkDestroyed to
happen before the netId is marked free, but that shouldn't cause
any behavioural changes because netId allocation is an
implementation detail of ConnectivityService and is not
observable by apps or system components.
Bug: 216567577
Test: builds, boots
Test: atest FrameworksNetTests FrameworksNetIntegrationTests
Test: atest CtsNetTestCases:android.net.cts.ConnectivityManagerTest
Test: atest CtsNetTestCases:android.net.cts.NetworkAgentTest#testDestroyAndAwaitReplacement
Change-Id: I9f9e022fef66b31a29cce560413321075e992756
Lorenzo Colitticommited 2022-03-14 21:52:37 +09:00
Rate-limiting cannot work because the BPF program is in the
mainline version of netd.c, which is placed into net_shared
and thus cannot run pre-T.
Disable it entirely to ensure no impact on S.
Test: atest ConnectivityCoverageTests:com.android.server.ConnectivityServiceTest on AOSP
Test: atest ConnectivityCoverageTests:com.android.server.ConnectivityServiceTest on S
Change-Id: I47521a100f8287ecdece25e810db8f3cade46778
Lorenzo Colitticommited 2022-03-07 12:21:40 +00:00
Most of the methods in BpfNetMaps are only used on T+ devices,
where BpfNetMaps never calls into netd. Remove the code in these
methods that calls into netd, because that code can never run.
The code was only written in the first place because it was
necessary when TrafficController had not yet moved to mainline.
The list of methods is:
- addNaughtyApp
- removeNaughtyApp
- addNiceApp
- removeNiceApp
- setChildChain
- replaceUidChain
- setUidRule
Test: treehugger
Change-Id: Ie7d210be2f7983178f5aa550370b9476de66e988
Lorenzo Colittiauthored and markchiencommited 2022-03-07 12:56:18 +08:00
swapActiveStatsMap is temporary added for the NetworkStatsFactory to
call BpfNetMaps#swapActiveStatsMap in tethering mainline module. Now
NetworkStatsFactory already be mainlined, calling BpfNetMaps#swapActiveStatsMap
directly.
Bug: 218494448
Test: atest ConnectivityCoverageTests
atest FrameworksNetTests
Change-Id: I3358e4ac5fb7ed0964273afdbccd1b4128ca7645
The tc police filter attaches to the clsact qdisc, so the rate limit
cannot be enabled before the qdisc is added to the interface.
The clsact qdisc is added as part of INetd#networkAddInterface, which is
called from inside updateLinkProperties.
Test: atest FrameworksNetTests:ConnectivityServiceTest
Change-Id: I0713605ff3684f8271eb3f0e29ab7116561963f1
The API won't modify the passed NetworkCapabilities and
LinkProperties, but redactNetworkCapabilitiesForPackage and
redactLinkPropertiesForPackage sound like they will. To reduce
the confusion, rename the API with prefix "getRedacted".
Also modify the javadoc to describe more about what the API will
do if the given UID doesn't have location permission.
Bug: 220367512
Test: atest CtsNetTestCases
Change-Id: I964f1062da1ae96df9b369b911486da1379b8a19
Currently, there are two EVENT_NETWORK_TESTED message types in
ConnectivityService. One is used by the ConnectivityService
handler to process validation results, and one is used by
ConnectivityDiagnosticsHandler to send connectivity reports.
The two messages have different contents so it is confusing that
they have the same integer and the same name. Rename the second
one to CMD_SEND_CONNECTIVITY_REPORT.
Test: atest ConnectivityServiceTest
Test: atest CtsNetTestCases:android.net.cts.ConnectivityDiagnosticsManagerTest
Change-Id: I77d63dad477315e1fcc7225a5ef03aff2bed8c35
Lorenzo Colitticommited 2022-02-19 02:24:02 +09:00
TestNetworkAgentWrapper does not set the interface name in its
LinkProperties causing logwtf to fail tests on -eng build.
Test: atest FrameworksNetTests:ConnectivityServiceTest on -eng build
Change-Id: Ieba0453ce897aa1052cb98f1de4c7bb099383c8d
Add some happy path logging that informs about active rate limits.
Test: TreeHugger
Bug: 218840346
Change-Id: Iddd50583ca2e90afe83a5c68611418fa794afb3f
All NetworkMonitor messages contain the netId of the source
NetworkMonitor. But the netId is in various places in the
message. It's most frequently in arg2, but sometimes it's boxed
into an Integer in obj, and sometimes it's in another object.
Always pass the netId into arg2. This allows us to write
common code at the beginning of the function that extracts the
netId and nai, and performs common actions on all messages.
Bug: 216567577
Test: atest FrameworksNetTests FrameworksNetIntegrationTests
Test: atest CtsNetTestCases:ConnectivityManageTest
Test: atest CtsNetTestCases:NetworkAgentTest
Change-Id: Idbbe3cddfc5475a2d56df387f840439dc4c9514c
Lorenzo Colitticommited 2022-02-18 00:28:01 +09:00
Sooraj Sasindran
commited 
Prerana Patil
authored and
Gerrit Code Review
commited 
Treehugger Robot
authored and
Hungming Chen
authored and
Maciej Żenczykowski
commited 
Lorenzo Colitti
authored and
Andrew Cheng
commited 
Junyu Lai
commited 
Tyler Wear
commited 
Lucas Lin
authored and
markchien
commited 
Benedict Wong
commited 
he_won.hwang
commited 
Chalard Jean
authored and
Patrick Rohr
authored and
Xiao Ma
commited 
Ken Chen
commited