android_packages_modules_Co.../staticlibs/testutils/host/python/apf_utils.py

199 lines
6.5 KiB
Python
Raw Normal View History

# Copyright (C) 2024 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
import re
from mobly.controllers import android_device
from mobly.controllers.android_device_lib.adb import AdbError
from net_tests_utils.host.python import adb_utils, assert_utils
# Constants.
ETHER_BROADCAST = "FFFFFFFFFFFF"
ETH_P_ETHERCAT = "88A4"
class PatternNotFoundException(Exception):
"""Raised when the given pattern cannot be found."""
class UnsupportedOperationException(Exception):
pass
def get_apf_counter(
ad: android_device.AndroidDevice, iface: str, counter_name: str
) -> int:
counters = get_apf_counters_from_dumpsys(ad, iface)
return counters.get(counter_name, 0)
def get_apf_counters_from_dumpsys(
ad: android_device.AndroidDevice, iface_name: str
) -> dict:
dumpsys = adb_utils.get_dumpsys_for_service(ad, "network_stack")
# Extract IpClient section of the specified interface.
# This takes inputs like:
# IpClient.wlan0
# ...
# IpClient.wlan1
# ...
iface_pattern = re.compile(
r"^IpClient\." + iface_name + r"\n" + r"((^\s.*\n)+)", re.MULTILINE
)
iface_result = iface_pattern.search(dumpsys)
if iface_result is None:
raise PatternNotFoundException("Cannot find IpClient for " + iface_name)
# Extract APF counters section from IpClient section, which looks like:
# APF packet counters:
# COUNTER_NAME: VALUE
# ....
apf_pattern = re.compile(
r"APF packet counters:.*\n.(\s+[A-Z_0-9]+: \d+\n)+", re.MULTILINE
)
apf_result = apf_pattern.search(iface_result.group(0))
if apf_result is None:
raise PatternNotFoundException(
"Cannot find APF counters in text: " + iface_result.group(0)
)
# Extract key-value pairs from APF counters section into a list of tuples,
# e.g. [('COUNTER1', '1'), ('COUNTER2', '2')].
counter_pattern = re.compile(r"(?P<name>[A-Z_0-9]+): (?P<value>\d+)")
counter_result = counter_pattern.findall(apf_result.group(0))
if counter_result is None:
raise PatternNotFoundException(
"Cannot extract APF counters in text: " + apf_result.group(0)
)
# Convert into a dict.
result = {}
for key, value_str in counter_result:
result[key] = int(value_str)
ad.log.debug("Getting apf counters: " + str(result))
return result
def get_hardware_address(
ad: android_device.AndroidDevice, iface_name: str
) -> str:
"""Retrieves the hardware (MAC) address for a given network interface.
Returns:
The hex representative of the MAC address in uppercase.
E.g. 12:34:56:78:90:AB
Raises:
PatternNotFoundException: If the MAC address is not found in the command
output.
"""
# Run the "ip link" command and get its output.
ip_link_output = adb_utils.adb_shell(ad, f"ip link show {iface_name}")
# Regular expression to extract the MAC address.
# Parse hardware address from ip link output like below:
# 46: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq ...
# link/ether 72:05:77:82:21:e0 brd ff:ff:ff:ff:ff:ff
pattern = r"link/ether (([0-9a-fA-F]{2}:){5}[0-9a-fA-F]{2})"
match = re.search(pattern, ip_link_output)
if match:
return match.group(1).upper() # Extract the MAC address string.
else:
raise PatternNotFoundException(
"Cannot get hardware address for " + iface_name
)
def send_broadcast_empty_ethercat_packet(
ad: android_device.AndroidDevice, iface_name: str
) -> None:
"""Transmits a broadcast empty EtherCat packet on the specified interface."""
# Get the interface's MAC address.
mac_address = get_hardware_address(ad, iface_name)
# TODO: Build packet by using scapy library.
# Ethernet header (14 bytes).
packet = ETHER_BROADCAST # Destination MAC (broadcast)
packet += mac_address.replace(":", "") # Source MAC
packet += ETH_P_ETHERCAT # EtherType (EtherCAT)
# EtherCAT header (2 bytes) + 44 bytes of zero padding.
packet += "00" * 46
# Send the packet using a raw socket.
send_raw_packet_downstream(
ad, ETH_P_ETHERCAT, iface_name, ETHER_BROADCAST, packet
)
def send_raw_packet_downstream(
ad: android_device.AndroidDevice,
packetType: str,
iface_name: str,
dst_mac: str,
packet_in_hex: str,
) -> None:
"""Sends a raw packet over the specified downstream interface.
This function constructs and sends a raw packet using the
`send-raw-packet-downstream`
command provided by NetworkStack process. It's primarily intended for testing
purposes.
Args:
ad: The AndroidDevice object representing the connected device.
packetType: The type of packet to send (e.g., "88A4" for EtherCAT).
iface_name: The name of the network interface to use (e.g., "wlan0",
"eth0").
dst_mac: The destination MAC address of the packet (e.g., "FFFFFFFFFFFF"
for broadcast).
packet_in_hex: The raw packet data starting from L2 header encoded in
hexadecimal string format.
Raises:
UnsupportedOperationException: If the NetworkStack doesn't support
the `send-raw-packet` command.
UnexpectedBehaviorException: If the command execution produces unexpected
output other than an empty response or "Unknown command".
Important Considerations:
Security: This method only works on tethering downstream interfaces due
to security restrictions.
Packet Format: The `packet_in_hex` must be a valid hexadecimal
representation of a packet starting from L2 header.
"""
cmd = (
"cmd network_stack send-raw-packet-downstream"
f" {packetType} {iface_name} {dst_mac} {packet_in_hex}"
)
# Expect no output or Unknown command if NetworkStack is too old. Throw otherwise.
try:
output = adb_utils.adb_shell(ad, cmd)
except AdbError as e:
output = str(e.stdout)
if output:
if "Unknown command" in output:
raise UnsupportedOperationException(
"send-raw-packet-downstream command is not supported."
)
raise assert_utils.UnexpectedBehaviorError(
f"Got unexpected output: {output} for command: {cmd}."
)