Michal Malý
eb2addd404
USB: serial: option: Ignore card reader interface on Huawei E1750
...
Hi,
my Huawei 3G modem has an embedded Smart Card reader which causes
trouble when the modem is being detected (a bunch of "<warn> (ttyUSBx):
open blocked by driver for more than 7 seconds!" in messages.log). This
trivial patch corrects the problem for me. The modem identifies itself
as "12d1:1406 Huawei Technologies Co., Ltd. E1750" in lsusb although the
description on the body says "Model E173u-1"
Signed-off-by: Michal Malý <madcatxster@prifuk.cz>
Cc: Bjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-30 19:00:35 -07:00
..
aircable.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
ark3116.c
USB: serial: make minor allocation dynamic
2013-06-17 13:30:02 -07:00
belkin_sa.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
belkin_sa.h
bus.c
Driver core patches for 3.12-rc1
2013-09-03 11:37:15 -07:00
ch341.c
USB: ch341: fix TIOCMIWAIT and disconnect
2013-03-25 13:50:52 -07:00
console.c
USB: console: remove unnecessary operations test
2013-07-23 16:24:32 -07:00
cp210x.c
Merge 3.11-rc3 into usb-next
2013-07-29 07:43:16 -07:00
cyberjack.c
USB: cyberjack: fix disconnect handling
2013-03-25 13:48:26 -07:00
cypress_m8.c
USB: serial: set drain delay at port probe
2013-07-23 16:21:50 -07:00
cypress_m8.h
USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device
2013-06-03 10:33:10 -07:00
digi_acceleport.c
USB: serial: ports: add minor and port number
2013-06-10 14:46:40 -07:00
empeg.c
USB: serial: remove driver version information
2012-10-31 12:48:06 -07:00
ezusb_convert.pl
f81232.c
USB: serial: set drain delay at port probe
2013-07-23 16:21:50 -07:00
ftdi_sio.c
USB: serial: clean up attribute permissions
2013-08-25 15:12:03 -07:00
ftdi_sio.h
USB: ftdi_sio: add support for FT-X series devices
2012-03-14 15:43:05 -07:00
ftdi_sio_ids.h
USB: serial: ftdi_sio: add more RT Systems ftdi devices
2013-07-29 13:38:38 -07:00
garmin_gps.c
USB: serial: ports: add minor and port number
2013-06-10 14:46:40 -07:00
generic.c
USB: serial: remove hupping check from tiocmiwait
2013-07-23 16:21:50 -07:00
io_16654.h
io_edgeport.c
USB: io_edgeport: remove unused defines
2013-07-23 16:28:22 -07:00
io_edgeport.h
io_ionsp.h
io_tables.h
USB: io_edgeport: switch to generic TIOCMIWAIT implementation
2013-03-25 13:50:53 -07:00
io_ti.c
USB: serial: clean up attribute permissions
2013-08-25 15:12:03 -07:00
io_ti.h
io_usbvend.h
ipaq.c
USB: serial: remove driver version information
2012-10-31 12:48:06 -07:00
ipw.c
USB: serial: remove driver version information
2012-10-31 12:48:06 -07:00
ir-usb.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
iuu_phoenix.c
USB: serial: clean up attribute permissions
2013-08-25 15:12:03 -07:00
iuu_phoenix.h
Kconfig
USB: fix typo in usb serial simple driver Kconfig
2013-09-17 09:36:10 -07:00
keyspan.c
Merge 3.11-rc6 into usb-next
2013-08-18 20:33:01 -07:00
keyspan.h
USB: keyspan: fix NULL-pointer dereferences and memory leaks
2012-10-25 09:37:13 -07:00
keyspan_pda.c
USB patches for 3.10-rc1
2013-04-29 12:19:23 -07:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
kl5kusb105.c
USB: kl5kusb105: always disable uart on close
2013-03-25 13:54:31 -07:00
kl5kusb105.h
kobil_sct.c
USB: kobil_sct: use port interrupt-out urb
2013-04-17 10:05:35 -07:00
kobil_sct.h
Makefile
USB: serial: move the "simple" drivers into usb-serial-simple.c
2013-08-12 12:14:52 -07:00
Makefile-keyspan_pda_fw
mct_u232.c
USB: mct_u232: clean up read implementation
2013-04-17 10:05:35 -07:00
mct_u232.h
metro-usb.c
USB: serial: ports: add minor and port number
2013-06-10 14:46:40 -07:00
mos7720.c
USB: mos7720: fix big-endian control requests
2013-08-19 17:02:11 -07:00
mos7840.c
Merge 3.11-rc6 into usb-next
2013-08-18 20:33:01 -07:00
navman.c
TTY: switch tty_flip_buffer_push
2013-01-15 22:30:15 -08:00
omninet.c
USB: omninet: switch to generic read implementation
2013-04-17 10:05:34 -07:00
opticon.c
USB: serial: make minor allocation dynamic
2013-06-17 13:30:02 -07:00
option.c
USB: serial: option: Ignore card reader interface on Huawei E1750
2013-09-30 19:00:35 -07:00
oti6858.c
USB: oti6858: do not call set_termios with uninitialised data
2013-07-23 16:24:33 -07:00
oti6858.h
pl2303.c
USB: pl2303: distinguish between original and cloned HX chips
2013-09-17 09:36:10 -07:00
pl2303.h
USB: serial: pl2303: rm duplicate id
2011-11-15 10:06:15 -08:00
qcaux.c
qcaux: add Franklin U600
2013-03-11 11:09:17 -07:00
qcserial.c
USB: option,qcserial: move Novatel Gobi1K IDs to qcserial
2013-06-24 16:21:53 -07:00
quatech2.c
USB: quatech2: fix port DMA-buffer allocations
2013-08-14 13:51:02 -07:00
safe_serial.c
USB: safe_serial: remove vendor/product module parameters
2013-07-23 16:28:23 -07:00
sierra.c
USB: serial: ports: add minor and port number
2013-06-10 14:46:40 -07:00
spcp8x5.c
USB: serial: set drain delay at port probe
2013-07-23 16:21:50 -07:00
ssu100.c
USB: serial: make minor allocation dynamic
2013-06-17 13:30:02 -07:00
symbolserial.c
USB: symbolserial: move private-data allocation to port_probe
2013-04-17 10:05:35 -07:00
ti_usb_3410_5052.c
Merge 3.11-rc6 into usb-next
2013-08-18 20:33:01 -07:00
ti_usb_3410_5052.h
USB: serial: ti_usb_3410_5052: new device id for Abbot strip port cable
2013-06-19 15:54:45 -07:00
usb-serial-simple.c
USB: serial: fix stringify operator in usb-serial-simple
2013-08-18 13:11:06 -07:00
usb-serial.c
USB: serial: clean up dtr_rts
2013-07-23 16:21:50 -07:00
usb-wwan.h
USB: usb-wwan: fix multiple memory leaks in error paths
2012-10-25 09:37:13 -07:00
usb_debug.c
USB: serial: rework usb_serial_register/deregister_drivers()
2012-05-08 15:46:14 -07:00
usb_wwan.c
USB-Serial: Fix error handling of usb_wwan
2013-08-12 13:45:26 -07:00
visor.c
USB: visor: fix initialisation of Treo/Kyocera devices
2013-05-29 10:47:45 +09:00
visor.h
whiteheat.c
USB: serial: make minor allocation dynamic
2013-06-17 13:30:02 -07:00
whiteheat.h
wishbone-serial.c
USB: serial: wishbone-serial: fix up minor sparse warning
2013-04-11 08:45:34 -07:00
xsens_mt.c
usb: add driver for xsens motion trackers
2013-01-25 09:56:54 -08:00
zte_ev.c
USB: option,zte_ev: move most ZTE CDMA devices to zte_ev
2013-06-06 09:06:25 -07:00