Lendacky, Thomas
983942a5ea
amd-xgbe-phy: Fix initial mode when autoneg is disabled
...
When the ethtool command is used to set the speed of the device while
the device is down, the check to set the initial mode may fail when
the device is brought up, causing failure to bring the device up.
Update the code to set the initial mode based on the desired speed if
auto-negotiation is disabled.
This patch fixes a bug introduced by:
d9663c8c21 ("amd-xgbe-phy: Use phydev advertising field vs supported")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-26 19:47:30 -04:00
..
amd-xgbe-phy.c
amd-xgbe-phy: Fix initial mode when autoneg is disabled
2015-05-26 19:47:30 -04:00
amd.c
net: phy: replace phy_driver_register calls
2014-11-12 13:52:53 -05:00
at803x.c
net: phy: at803x: simplify using devm_gpiod_get_optional and its 4th argument
2015-04-01 12:44:04 -04:00
bcm7xxx.c
net: phy: bcm7xxx: Fix 7425 PHY ID and flags
2015-05-25 00:16:07 -04:00
bcm63xx.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
bcm87xx.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
broadcom.c
net: phy: broadcom: Add BCM54616S phy entry
2015-04-08 15:28:13 -04:00
cicada.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
davicom.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
dp83640.c
net: dp83640: fix improper double spin locking.
2015-05-25 18:21:59 -04:00
dp83640_reg.h
ptp: Added a clock driver for the National Semiconductor PHYTER.
2011-05-23 13:10:23 -07:00
et1011c.c
net: phy: replace phy_driver_register calls
2014-11-12 13:52:53 -05:00
fixed_phy.c
add fixed_phy_update_state() - update state of fixed_phy
2015-04-03 15:08:20 -04:00
icplus.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
Kconfig
net: amd-xgbe: Add hardware dependency
2015-05-09 16:24:15 -04:00
lxt.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
Makefile
net: Allow FIXED_PHY to be modular.
2014-12-16 15:02:23 -05:00
marvell.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
mdio-bcm-unimac.c
net: phy: constify of_device_id array
2015-03-17 15:00:23 -04:00
mdio-bitbang.c
Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free"
2012-11-14 22:32:15 -05:00
mdio-gpio.c
net: mdio-gpio: Allow for unspecified bus id
2015-05-10 19:42:11 -04:00
mdio-moxart.c
drivers/net: delete non-required instances of include <linux/init.h>
2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c
mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functions
2015-04-27 13:35:40 -04:00
mdio-mux-mmioreg.c
net: phy: constify of_device_id array
2015-03-17 15:00:23 -04:00
mdio-mux.c
netdev/phy: skip disabled mdio-mux nodes
2012-08-20 02:16:00 -07:00
mdio-octeon.c
net: phy: constify of_device_id array
2015-03-17 15:00:23 -04:00
mdio-sun4i.c
net: sun4i: remove empty MDIO bus reset function
2014-03-28 01:38:02 -04:00
mdio_bus.c
net: phy: avoid suspending twice a PHY
2015-01-27 00:16:51 -08:00
micrel.c
net: phy: micrel: Fix regression in kszphy_probe
2015-05-12 23:18:40 -04:00
national.c
net: phy: replace phy_driver_register calls
2014-11-12 13:52:53 -05:00
phy.c
net: phy: Make sure phy_start() always re-enables the phy interrupts
2015-05-20 12:22:08 -04:00
phy_device.c
net: phy: keep track of the PHY suspend state
2015-01-27 00:16:51 -08:00
qsemi.c
net: phy: replace phy_driver_register calls
2014-11-12 13:52:53 -05:00
realtek.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
smsc.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
spi_ks8995.c
net: phy: spi_ks8995: remove sysfs bin file by registered attribute
2014-11-04 17:18:45 -05:00
ste10Xp.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00
vitesse.c
net: phy: replace phy_drivers_register calls
2014-11-12 13:52:53 -05:00