Linus Torvalds
988adfdffd
Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
...
Pull drm updates from Dave Airlie:
"Highlights:
- AMD KFD driver merge
This is the AMD HSA interface for exposing a lowlevel interface for
GPGPU use. They have an open source userspace built on top of this
interface, and the code looks as good as it was going to get out of
tree.
- Initial atomic modesetting work
The need for an atomic modesetting interface to allow userspace to
try and send a complete set of modesetting state to the driver has
arisen, and been suffering from neglect this past year. No more,
the start of the common code and changes for msm driver to use it
are in this tree. Ongoing work to get the userspace ioctl finished
and the code clean will probably wait until next kernel.
- DisplayID 1.3 and tiled monitor exposed to userspace.
Tiled monitor property is now exposed for userspace to make use of.
- Rockchip drm driver merged.
- imx gpu driver moved out of staging
Other stuff:
- core:
panel - MIPI DSI + new panels.
expose suggested x/y properties for virtual GPUs
- i915:
Initial Skylake (SKL) support
gen3/4 reset work
start of dri1/ums removal
infoframe tracking
fixes for lots of things.
- nouveau:
tegra k1 voltage support
GM204 modesetting support
GT21x memory reclocking work
- radeon:
CI dpm fixes
GPUVM improvements
Initial DPM fan control
- rcar-du:
HDMI support added
removed some support for old boards
slave encoder driver for Analog Devices adv7511
- exynos:
Exynos4415 SoC support
- msm:
a4xx gpu support
atomic helper conversion
- tegra:
iommu support
universal plane support
ganged-mode DSI support
- sti:
HDMI i2c improvements
- vmwgfx:
some late fixes.
- qxl:
use suggested x/y properties"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
drm: sti: fix module compilation issue
drm/i915: save/restore GMBUS freq across suspend/resume on gen4
drm: sti: correctly cleanup CRTC and planes
drm: sti: add HQVDP plane
drm: sti: add cursor plane
drm: sti: enable auxiliary CRTC
drm: sti: fix delay in VTG programming
drm: sti: prepare sti_tvout to support auxiliary crtc
drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
drm: sti: fix hdmi avi infoframe
drm: sti: remove event lock while disabling vblank
drm: sti: simplify gdp code
drm: sti: clear all mixer control
drm: sti: remove gpio for HDMI hot plug detection
drm: sti: allow to change hdmi ddc i2c adapter
drm/doc: Document drm_add_modes_noedid() usage
drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
drm: Zero out DRM object memory upon cleanup
drm/i915/bdw: Fix the write setting up the WIZ hashing mode
...
2014-12-15 15:52:01 -08:00
..
ad5449.h
ad5755.h
ad7266.h
ad7291.h
staging:iio:ad7291: Move out of staging
2014-07-08 21:17:30 +01:00
ad7298.h
staging:iio: Move the ad7298 driver out of staging
2012-11-19 22:22:15 +00:00
ad7303.h
iio:dac: Add support for the AD7303
2013-06-11 20:25:58 +01:00
ad7791.h
ad7793.h
staging:iio: Move ad7793 driver out of staging
2012-11-30 12:57:08 +00:00
ad7887.h
adau17x1.h
ASoC: Add ADAU1381/ADAU1781 audio CODEC support
2014-05-27 20:54:51 +01:00
adau1977.h
ASoC: Add ADAU1977 CODEC driver
2014-02-19 13:36:15 +09:00
ads7828.h
hwmon: (ads7828) driver cleanup
2012-12-05 10:55:54 -08:00
arm-ux500-pm.h
ARM: ux500: move PM-related PRCMU functions to machine
2013-04-08 13:57:53 +02:00
asoc-imx-ssi.h
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c.h
ASoC: Samsung: Add quirk for internal DMA
2014-11-07 10:38:17 +00:00
asoc-s3c24xx_simtec.h
ASoC: s3c24xx: Remove invalid file reference
2014-02-25 21:29:31 +09:00
asoc-ti-mcbsp.h
ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h
2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h
ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion
2014-01-07 15:36:09 +00:00
at24.h
misc: (at24) move header to linux/platform_data/
2013-09-30 06:02:34 +02:00
at91_adc.h
iio: adc: at91_adc: Add support for touchscreens without TSMR
2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h
ata: pata_samsung_cf: removes s5pc100 related ata codes
2014-06-30 10:48:08 -04:00
atmel.h
TTY/Serial driver patches for 3.16-rc1
2014-06-03 09:01:02 -07:00
bcmgenet.h
net: bcmgenet: enable driver to work without a device tree
2014-12-08 20:26:59 -05:00
bd6107.h
backlight: Add ROHM BD6107 backlight driver
2013-07-16 13:01:19 +09:00
brcmfmac-sdio.h
brcmfmac: abstract tx packet processing functions
2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h
staging/bluetooth: Add hci_h4p driver
2014-02-07 10:13:53 -08:00
camera-mx2.h
camera-mx3.h
[media] V4L2: mx3_camera: add support for asynchronous subdevice registration
2013-08-18 09:06:37 -03:00
camera-pxa.h
camera-rcar.h
[media] V4L2: soc_camera: Renesas R-Car VIN driver
2013-08-18 09:01:10 -03:00
clk-integrator.h
ARM: integrator: switch to fetch clocks from device tree
2014-02-13 11:20:42 +01:00
clk-lpss.h
ACPI / LPSS: register clock device for Lynxpoint DMA properly
2013-05-14 10:23:58 +05:30
clk-realview.h
clk-u300.h
clk-ux500.h
clk: ux500: Copy u8500_clk_init() ready for DT enablement
2013-09-26 11:05:26 +02:00
coda.h
media: coda: use genalloc API
2013-04-29 18:28:13 -07:00
crypto-atmel.h
ARM: AT91SAM9G45: same platform data structure for all crypto peripherals
2013-03-10 16:46:41 +08:00
crypto-ux500.h
cyttsp4.h
Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
2013-06-30 21:24:21 -07:00
davinci_asp.h
ASoC: davinci-mcasp: Rename platform data struct
2014-02-03 18:26:59 +00:00
db8500_thermal.h
Thermal: Add ST-Ericsson DB8500 thermal driver.
2012-11-15 20:50:34 +08:00
dma-atmel.h
dmaengine: at_hdmac: extend hardware handshaking interface identification
2013-07-05 11:40:29 +05:30
dma-coh901318.h
dma: coh901318: create a proper platform data file
2013-01-07 17:35:57 +01:00
dma-dw.h
dmaengine: dw: split dma-dw.h to platform and private parts
2014-10-15 20:31:04 +05:30
dma-ep93xx.h
dma-imx-sdma.h
dma: imx-sdma: Add sdma firmware version 2 support
2013-12-16 09:18:47 +05:30
dma-imx.h
dmaengine: imx-sdma: Add a new DMATYPE for SAI
2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h
dma: Cleanup dma-mmp_tdma.h header
2014-01-13 13:30:30 +05:30
dma-mv_xor.h
dma: mv_xor: Cleanup in dma-mv_xor.h header
2014-01-13 13:30:31 +05:30
dma-rcar-audmapp.h
shdma: add R-Car Audio DMAC peri peri driver
2014-03-29 19:38:09 +05:30
dma-rcar-hpbdma.h
dma: add driver for R-Car HPB-DMAC
2013-09-02 17:35:55 +05:30
dma-s3c24xx.h
ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442
2013-10-21 05:32:48 +09:00
dma-ste-dma40.h
dmaengine: ste_dma40: Allow memcpy channels to be configured from DT
2013-06-04 11:12:11 +02:00
dmtimer-omap.h
ARM: OMAP: Add platform data header for DMTIMERs
2012-11-16 10:35:08 -06:00
drv260x-pdata.h
Input: drv260x - add TI drv260x haptics driver
2014-08-19 22:19:28 -07:00
dwc3-omap.h
usb: dwc3: omap: remove platform data associated with dwc3-omap
2013-03-18 11:16:38 +02:00
edma.h
ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue
2014-07-28 17:03:13 +05:30
efm32-spi.h
spi: new controller driver for efm32 SoCs
2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h
nand: omap2: Remove horrible ifdefs to fix module probe
2014-09-22 11:37:51 -07:00
emif_plat.h
memory: emif: Handle devices which are not rated for >85C
2013-03-25 13:18:12 -07:00
eth-netx.h
net: Cleanup in eth-netx.h
2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h
Add support for GMT G762/G763 PWM fan controllers
2013-06-27 10:31:42 -07:00
gpio-davinci.h
gpio: remove obsolete tnetv107x driver
2014-03-05 10:44:44 +08:00
gpio-dwapb.h
GPIO: gpio-dwapb: Enable platform driver binding to MFD driver
2014-09-23 17:51:37 +02:00
gpio-em.h
gpio: em: Add pinctrl support
2013-07-21 17:24:41 +02:00
gpio-lpc32xx.h
ARM: lpc32xx: move custom GPIO header
2013-12-03 11:26:06 +01:00
gpio-omap.h
gpio-rcar.h
gpio-rcar: Add RCAR_GP_PIN macro
2013-06-04 21:03:56 +09:00
gpio-ts5500.h
gpio: add TS-5500 DIO blocks support
2012-12-10 11:23:25 +01:00
gpio_backlight.h
backlight: Add GPIO-based backlight driver
2013-07-16 13:01:05 +09:00
hsmmc-omap.h
mmc: omap_hsmmc: remove unused slot_id parameter
2014-11-26 14:30:56 +01:00
hwmon-s3c.h
hwmon: (s3c) Trivial cleanup in hwmon-s3c.h
2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h
i2c: i2c-cbus-gpio: introduce driver
2012-11-19 09:57:16 +01:00
i2c-davinci.h
i2c-designware.h
i2c: designware: add support of platform data to set I2C mode
2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-nuc900.h
i2c-s3c2410.h
i2c: s3c2410: Trivial cleanup in header file
2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h
watchdog: add Intel MID watchdog driver support
2014-06-10 21:48:16 +02:00
invensense_mpu6050.h
Invensense MPU6050 Device Driver.
2013-02-10 17:42:43 +00:00
iommu-omap.h
iommu/omap: Remove platform data da_start and da_end fields
2014-07-29 12:39:56 +02:00
ipmmu-vmsa.h
iommu: Add driver for Renesas VMSA-compatible IPMMU
2014-05-26 11:18:21 +02:00
irda-pxaficp.h
irq-renesas-intc-irqpin.h
irqchip: intc-irqpin: GPL header for platform data
2013-03-18 21:26:06 +09:00
irq-renesas-irqc.h
irqchip: Renesas IRQC driver
2013-03-18 21:26:06 +09:00
isl9305.h
regulator: isl9305: Add Intersil ISL9305/H driver
2014-09-06 12:43:05 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h
keypad-ep93xx.h
Input: keypad-ep93xx - cleanup header file
2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h
Input: keypad-omap - cleanup header file
2013-12-27 17:20:22 -08:00
keypad-pxa27x.h
Input: pxa27x-keypad - use matrix_keymap for matrix keys
2013-06-18 22:56:51 -07:00
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h
leds: kirkwood: Cleanup in header files
2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h
leds: kirkwood: Cleanup in header files
2014-01-27 17:28:51 -08:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h
leds: lp55xx: handle enable pin in driver
2013-10-25 10:13:25 -07:00
leds-omap.h
leds-pca963x.h
leds-pca9633: Rename to leds-pca963x
2013-08-26 17:22:14 -07:00
leds-s3c24xx.h
leds: leds-s3c24xx: Trivial cleanup in header file
2014-02-27 09:57:11 -08:00
lm3630a_bl.h
backlight: lm3630: apply chip revision
2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h
backlight: lp855x: Add supply regulator to lp855x
2014-12-09 09:24:45 +00:00
lp8727.h
lp8755.h
regulator: lp8755: new driver for LP8755
2012-12-24 16:32:34 +00:00
lv5207lp.h
backlight: Add Sanyo LV5207LP backlight driver
2013-07-16 13:01:10 +09:00
macb.h
mailbox-omap.h
ARM: OMAP2+: add user and fifo info to mailbox platform data
2013-06-11 11:41:30 -05:00
max197.h
hwmon: (max197) add include guard
2014-01-14 21:36:53 -08:00
max3421-hcd.h
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
2014-05-29 11:19:30 -07:00
max6697.h
hwmon: Driver for Maxim MAX6697 and compatibles
2013-02-06 09:57:56 -08:00
mfd-mcp-sa11x0.h
mfd: Cleanup mfd-mcp-sa11x0.h header
2014-01-21 08:28:59 +00:00
microread.h
NFC: Initial support for Inside Secure microread
2013-02-03 20:37:42 +01:00
mmc-atmel-mci.h
mmc: atmel-mci: move mach header to platform_data
2014-11-10 12:40:37 +01:00
mmc-davinci.h
ARM: davinci: mmc: derive version information from device name
2013-04-03 09:42:16 +05:30
mmc-esdhc-imx.h
mmc: sdhci-esdhc-imx: add delay line setting support
2013-10-21 15:58:13 -04:00
mmc-msm_sdcc.h
mmc: msm: Cleanup mmc-msm_sdcc.h header
2014-02-25 15:43:15 -05:00
mmc-mvsdio.h
mmc: mvsdio: Cleanup mmc-mvsdio.h header
2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h
ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
2014-11-26 14:30:53 +01:00
mmc-pxamci.h
ARM: pxa: propagate errors from regulator_enable() to pxamci
2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
mmc-sdhci-s3c.h
mmc: sdhci-s3c: remove platform dependencies
2013-04-19 13:51:23 +02:00
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
msm_serial_hs.h
mtd-davinci-aemif.h
ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif
2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h
nand: omap2: Add support for flash-based bad block table
2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h
mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding
2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h
mtd: nand: s3c2410: Trivial cleanup in header file
2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h
mtd: omap2: Cleanup header files
2014-01-11 11:39:18 -08:00
mtd-orion_nand.h
mtd: orion: Cleanup mtd-orion_nand.h header
2014-01-11 11:39:23 -08:00
mv_usb.h
usb: mv_usb: remove clock name from pdata
2013-04-02 11:42:47 +03:00
net-cw1200.h
cw1200: rename the cw1200 platform definition header
2013-06-03 15:54:56 -04:00
ntc_thermistor.h
hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS
2014-08-04 07:01:35 -07:00
omap-twl4030.h
ASoC: omap-twl4030: Update the header file to support more boards
2012-12-07 12:54:31 +09:00
omap-wd-timer.h
omap1_bl.h
omap_drm.h
pca953x.h
gpio: (gpio-pca953x) move header to linux/platform_data/
2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h
pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.
2013-09-19 14:37:27 +02:00
pinctrl-single.h
pinctrl: single: Add support for auxdata
2013-10-10 15:30:47 -07:00
pn544.h
nfc: Fix FSF address in file headers
2013-12-11 10:56:21 -05:00
pxa2xx_udc.h
ARM: move udc_pxa2xx.h to linux/platform_data
2012-11-16 11:35:30 +00:00
pxa_sdhci.h
mmc: sdhci-pxav3: Move private driver data to driver source
2014-11-10 12:40:31 +01:00
remoteproc-omap.h
remoteproc/omap: fix a sparse warning
2013-07-01 15:30:51 +03:00
s3c-hsotg.h
ARM defconfigs: add missing inclusions of linux/platform_device.h
2013-02-14 15:14:32 -08:00
s3c-hsudc.h
sa11x0-serial.h
ARM: move serial_sa1100.h header file to linux/platform_data
2012-11-16 11:35:29 +00:00
sc18is602.h
serial-imx.h
serial: imx: Remove init() and exit() platform callbacks
2014-02-28 16:36:45 -08:00
serial-omap.h
ARM: OMAP: serial: remove last vestige of DTR_gpio support.
2014-11-10 09:06:44 -08:00
serial-sccnxp.h
Revert "serial: sccnxp: Add DT support"
2013-08-02 15:25:19 +08:00
sh_ipmmu.h
iommu/shmobile: Add iommu driver for Renesas IPMMU modules
2013-02-06 10:57:25 +01:00
shmob_drm.h
sht15.h
hwmon: (sht15) add include guard
2014-01-14 21:36:53 -08:00
shtc1.h
hwmon: add support for Sensirion SHTC1 sensor
2014-06-12 08:36:48 -07:00
si5351.h
clk: si5351: remove variant from platform_data
2014-01-27 11:20:22 -08:00
simplefb.h
fbdev changes for 3.12:
2013-09-05 09:49:32 -07:00
spi-clps711x.h
spi/clps711x: New SPI master driver
2012-12-05 23:14:38 +00:00
spi-davinci.h
ARM: davinci: move private EDMA API to arm/common
2013-06-18 10:52:03 +05:30
spi-ep93xx.h
spi-imx.h
spi-nuc900.h
spi: nuc900: Cleanup spi-nuc900.h header
2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h
spi: spi-omap2-mcspi.c: Toggle CS after each word
2013-01-26 17:00:04 +08:00
spi-s3c64xx.h
spi/s3c64xx: Trivial cleanup in header file
2014-02-16 09:59:13 +08:00
ssm2518.h
ASoC: Add ssm2518 support
2013-05-25 10:33:30 -04:00
st21nfca.h
NFC: st21nfca: Remove gpio_irq field in static and dts configuration
2014-12-02 00:29:23 +01:00
st21nfcb.h
NFC: st21nfcb: Remove gpio_irq field in static and dts configuration
2014-12-02 00:54:23 +01:00
st1232_pdata.h
Input: st1232 - add reset pin handling
2013-04-15 10:00:44 -07:00
st_sensors_pdata.h
iio: Added ST-sensors platform data to select the DRDY interrupt pin
2013-08-03 18:40:28 +01:00
syscon.h
mfd: syscon: Add platform data with a regmap config name
2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h
Input: s3c2410 - trivial cleanup in header file
2014-02-14 00:09:43 -08:00
tsl2563.h
iio:light:tsl2563 move out of staging
2013-01-27 17:37:24 +00:00
uio_dmem_genirq.h
uio_pruss.h
usb-davinci.h
usb-ehci-mxc.h
ARM: imx: move EHCI platform defines out of platform_data header
2014-07-18 16:10:04 +08:00
usb-ehci-orion.h
usb: ehci: Cleanup usb-ehci-orion.h header
2014-01-03 12:37:57 -08:00
usb-musb-ux500.h
usb: musb: ux500: move channel number knowledge into the driver
2013-06-04 11:12:02 +02:00
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap.h
mfd: omap-usb-host: override number of ports from platform data
2013-02-13 13:22:49 +02:00
usb-omap1.h
usb: omap1: add extcon to platform data
2013-12-06 14:36:37 -06:00
usb-pxa3xx-ulpi.h
usb-rcar-gen2-phy.h
usb: phy: Add RCAR Gen2 USB phy
2013-10-10 11:59:48 -05:00
usb-rcar-phy.h
phy-rcar-usb: add R8A7778 support
2013-06-11 16:11:16 +09:00
usb-s3c2410_udc.h
usb3503.h
usb: misc: usb3503: Add to select the ports to disable
2013-05-30 21:32:52 +09:00
ux500_wdt.h
watchdog: Add support for ux500_wdt watchdog
2013-02-14 00:22:53 +01:00
video-clcd-versatile.h
video: fix up versatile CLCD helper move
2014-07-23 17:41:00 +02:00
video-ep93xx.h
video: ep93xx: Cleanup video-ep93xx.h header
2014-01-17 10:57:41 +02:00
video-imxfb.h
video: imxfb: Remove unused fields from platform data structure
2014-02-28 12:35:22 +02:00
video-msm_fb.h
video: msm: Cleanup video-msm_fb.h header
2014-01-17 10:57:42 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h
video: pxa: Cleanup video-pxafb.h header
2014-01-17 10:57:42 +02:00
video_s3c.h
video/s3c: move platform_data out of arch/arm
2013-04-11 14:49:20 +03:00
voltage-omap.h
vsp1.h
[media] v4l: vsp1: Add LUT support
2013-12-11 09:25:20 -02:00
wiznet.h
zforce_ts.h
Input: add driver for Neonode zForce based touchscreens
2013-10-31 08:46:08 -07:00