Commit graph android_kernel_sony_sdm845/arch/x86/kernel/apic
Message SHA1
x86: apic - introduce imcr_ helpers
Impact: cleanup

Distinguish port writting magic into helpers with comments.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090412165058.535921550@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Cyrill Gorcunov   authored and   Ingo Molnar   commited 2009-04-12 19:23:53 +02:00
c0eaa4536f
x86: consolidate SMP code in io_apic.c
Impact: Cleanup

Reorganizes the code in arch/x86/kernel/io_apic.c by
combining two '#ifdef CONFIG_SMP' regions.  In addition
to making the code easier to understand the first
'#ifdef CONFIG_SMP' region is moved to a location later
in the file which will reduce the need for function
forward declarations when the code subsequently revised.

The only changes other than relocating code to a different
position in the file were the removal of the assign_irq_vector()
forward declaration which was no longer needed and some line
length reduction formatting changes.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Cc: lcm@us.ibm.com
LKML-Reference: <20090408210725.GC11159@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Gary Hade   authored and   Ingo Molnar   commited 2009-04-09 05:13:57 +02:00
e85abf8f43
Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  drivers/pci/intr_remapping.c: include acpi.h
  intel-iommu: Fix oops in device_to_iommu() when devices not found.
  intel-iommu: Handle PCI domains appropriately.
  intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges.
  x2apic/intr-remap: decouple interrupt remapping from x2apic
  x86, dmar: check if it's initialized before disable queue invalidation
  intel-iommu: set compatibility format interrupt
  Intel IOMMU Suspend/Resume Support - Interrupt Remapping
  Intel IOMMU Suspend/Resume Support - Queued Invalidation
  Intel IOMMU Suspend/Resume Support - DMAR
  intel-iommu: Add for_each_iommu() and for_each_active_iommu() macros

Linus Torvalds   commited 2009-04-06 14:26:05 -07:00
ffa009c366
Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...

Linus Torvalds   commited 2009-04-05 10:33:07 -07:00
90975ef712
x2apic/intr-remap: decouple interrupt remapping from x2apic
interrupt remapping must be enabled before enabling x2apic, but
interrupt remapping doesn't depend on x2apic, it can be used
separately. Enable interrupt remapping in init_dmars even x2apic
is not supported.

[dwmw2: Update Kconfig accordingly, fix build with INTR_REMAP && !X2APIC]

Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Han, Weidong   authored and   David Woodhouse   commited 2009-04-04 10:42:28 +01:00
d0b03bd1c6
Intel IOMMU Suspend/Resume Support - Interrupt Remapping
This patch enables suspend/resume for interrupt remapping. During suspend,
interrupt remapping is disabled. When resume, interrupt remapping is enabled
again.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

Fenghua Yu   authored and   David Woodhouse   commited 2009-04-03 21:45:59 +01:00
b24696bc55
sgi-gru: add macros for using the UV hub to send interrupts
Add macros for using the UV hub to send interrupts.  Change the IPI code
to use these macros.  These macros will also be used in additional patches
that will follow.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Jack Steiner   authored and   Linus Torvalds   commited 2009-04-02 19:05:05 -07:00
66666e50fc
Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt

Linus Torvalds   commited 2009-04-01 09:47:12 -07:00
e76e5b2c66
Merge branch 'linus' into cpumask-for-linus
Conflicts:
	arch/x86/kernel/cpu/common.c

Ingo Molnar   commited 2009-03-30 23:53:32 +02:00
65fb0d23fc
Merge branches 'x86/apic', 'x86/cleanups' and 'x86/mm' into x86/core
Ingo Molnar   commited 2009-03-28 22:27:35 +01:00
93394a761d
x86: Correct behaviour of irq affinity
Impact: get correct smp_affinity as user requested

The effect of setting desc->affinity (ie. from userspace via sysfs) has
varied over time.  In 2.6.27, the 32-bit code anded the value with
cpu_online_map, and both 32 and 64-bit did that anding whenever a cpu
was unplugged.

2.6.29 consolidated this into one routine (and fixed hotplug) but
introduced another variation: anding the affinity with cfg->domain.

We should just set it to what the user said - if possible.

(cpu_mask_to_apicid_and already takes cpu_online_mask into account)

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <49C94DDF.2010703@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Rusty Russell   authored and   Ingo Molnar   commited 2009-03-25 18:48:29 +01:00
e06b1b56f9
x86: use default_cpu_mask_to_apicid for 64bit
Impact: cleanup

Use online_mask directly on 64bit too.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49C94DAE.9070300@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Yinghai Lu   authored and   Ingo Molnar   commited 2009-03-24 22:28:38 +01:00
f56e503412
x86: fix set_extra_move_desc calling
Impact: fix bug with irq-descriptor moving when logical flat

Rusty observed:

> The effect of setting desc->affinity (ie. from userspace via sysfs) has varied
> over time.  In 2.6.27, the 32-bit code anded the value with cpu_online_map,
> and both 32 and 64-bit did that anding whenever a cpu was unplugged.
>
> 2.6.29 consolidated this into one routine (and fixed hotplug) but introduced
> another variation: anding the affinity with cfg->domain.  Is this right, or
> should we just set it to what the user said?  Or as now, indicate that we're
> restricting it.

Eric pointed out that desc->affinity should be what the user requested,
if it is at all possible to honor the user space request.

This bug got introduced by commit 22f65d31b "x86: Update io_apic.c to use
new cpumask API".

Fix it by moving the masking to before the descriptor moving ...

Reported-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
LKML-Reference: <49C94134.4000408@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Yinghai Lu   authored and   Ingo Molnar   commited 2009-03-24 22:12:10 +01:00
fa74c90733
Merge branch 'x86/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jaswinder/linux-2.6-tiptop into x86/cleanups
Ingo Molnar   commited 2009-03-24 15:20:51 +01:00
5c8cd82ed7
Merge branches 'x86/apic', 'x86/cleanups', 'x86/mm', 'x86/pat', 'x86/setup' and 'x86/signal'; commit 'v2.6.29' into x86/core
Ingo Molnar   commited 2009-03-24 15:19:45 +01:00
29219683c4
x86: apic/io_apic.c define msi_ir_chip and ir_ioapic_chip all the time
move out msi_ir_chip and ir_ioapic_chip from CONFIG_INTR_REMAP shadow

Fix:
 arch/x86/kernel/apic/io_apic.c:1431: warning: ‘msi_ir_chip’ defined but not used

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>

Jaswinder Singh Rajput   commited 2009-03-23 02:11:25 +05:30
a1e38ca5ce
x86: Fix a couple of sparse warnings in arch/x86/kernel/apic/io_apic.c
Impact: cleanup

This patch fixes the following sparse warnings:

 arch/x86/kernel/apic/io_apic.c:3602:17: warning: symbol 'hpet_msi_type'
 was not declared. Should it be static?

 arch/x86/kernel/apic/io_apic.c:3467:30: warning: Using plain integer as
 NULL pointer

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
LKML-Reference: <1237741871-5827-2-git-send-email-dmitri.vorobiev@movial.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Dmitri Vorobiev   authored and   Ingo Molnar   commited 2009-03-22 18:15:14 +01:00
1cc185211a
x86: fix IO APIC resource allocation error message
Impact: fix incorrect error message

- IO APIC resource allocation error message contains one too many "be".

- Print the error message iff there are IO APICs in the system.

I've seen this error message for some time on my x86-32 laptop...

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Alan Bartlett <ajb.stxsl@googlemail.com>
LKML-Reference: <200903202100.30789.bzolnier@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Bartlomiej Zolnierkiewicz   authored and   Ingo Molnar   commited 2009-03-20 21:02:55 +01:00
04c93ce499
x86: add x2apic_wrmsr_fence() to x2apic flush tlb paths
Impact: optimize APIC IPI related barriers

Uncached MMIO accesses for xapic are inherently serializing and hence
we don't need explicit barriers for xapic IPI paths.

x2apic MSR writes/reads don't have serializing semantics and hence need
a serializing instruction or mfence, to make all the previous memory
stores globally visisble before the x2apic msr write for IPI.

Add x2apic_wrmsr_fence() in flush tlb path to x2apic specific paths.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: "steiner@sgi.com" <steiner@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
LKML-Reference: <1237313814.27006.203.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Suresh Siddha   authored and   Ingo Molnar   commited 2009-03-18 09:36:14 +01:00
ce4e240c27
x86: fix broken irq migration logic while cleaning up multiple vectors
Impact: fix spurious IRQs

During irq migration, we send a low priority interrupt to the previous
irq destination. This happens in non interrupt-remapping case after interrupt
starts arriving at new destination and in interrupt-remapping case after
modifying and flushing the interrupt-remapping table entry caches.

This low priority irq cleanup handler can cleanup multiple vectors, as
multiple irq's can be migrated at almost the same time. While
there will be multiple invocations of irq cleanup handler (one cleanup
IPI for each irq migration), first invocation of the cleanup handler
can potentially cleanup more than one vector (as the first invocation can
see the requests for more than vector cleanup). When we cleanup multiple
vectors during the first invocation of the smp_irq_move_cleanup_interrupt(),
other vectors that are to be cleanedup can still be pending in the local
cpu's IRR (as smp_irq_move_cleanup_interrupt() runs with interrupts disabled).

When we are ready to unhook a vector corresponding to an irq, check if that
vector is registered in the local cpu's IRR. If so skip that cleanup and
do a self IPI with the cleanup vector, so that we give a chance to
service the pending vector interrupt and then cleanup that vector
allocation once we execute the lowest priority handler.

This fixes spurious interrupts seen when migrating multiple vectors
at the same time.

[ This is apparently possible even on conventional xapic, although to
  the best of our knowledge it has never been seen.  The stable
  maintainers may wish to consider this one for -stable. ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: stable@kernel.org

Suresh Siddha   authored and   H. Peter Anvin   commited 2009-03-17 16:49:30 -07:00
68a8ca593f
x86, ioapic: Fix non atomic allocation with interrupts disabled
Impact: fix possible race

save_mask_IO_APIC_setup() was using non atomic memory allocation while getting
called with interrupts disabled. Fix this by splitting this into two different
function. Allocation part save_IO_APIC_setup() now happens before
disabling interrupts.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Suresh Siddha   authored and   H. Peter Anvin   commited 2009-03-17 15:45:29 -07:00
05c3dc2c4b
x86, x2apic: cleanup ifdef CONFIG_INTR_REMAP in io_apic code
Impact: cleanup

Clean up #ifdefs and replace them with helper functions.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Suresh Siddha   authored and   H. Peter Anvin   commited 2009-03-17 15:45:07 -07:00
29b61be65a
x86, x2apic: cleanup the IO-APIC level migration with interrupt-remapping
Impact: simplification

In the current code, for level triggered migration, we need to modify the
io-apic RTE with the update vector information, along with modifying interrupt
remapping table entry(IRTE) with vector and destination. This is to ensure that
remote IRR bit inthe IOAPIC RTE gets cleared when the cpu does EOI.

With this patch, for level triggered, we eliminate the io-apic RTE modification
(with the updated vector information), by using a virtual vector (io-apic pin
number).  Real vector that is used for interrupting cpu will be coming from
the interrupt-remapping table entry. Trigger mode in the IRTE will always be
edge, and the actual level or edge trigger will be setup in the IO-APIC RTE.
So a level triggered interrupt will appear as an edge to the local apic
cpu but still as level to the IO-APIC.

With this change, level irq migration can be done by simply modifying
the interrupt-remapping table entry with out changing the io-apic RTE.
And as the interrupt appears as edge at the cpu, in addition to do the
local apic EOI, we need to do IO-APIC directed EOI to clear the remote
IRR bit in  the IO-APIC RTE.

This simplies the irq migration in the presence of interrupt-remapping.

Idea-by: Rajesh Sankaran <rajesh.sankaran@intel.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Suresh Siddha   authored and   H. Peter Anvin   commited 2009-03-17 15:44:27 -07:00
0280f7c416
x86, x2apic: fix clear_local_APIC() in the presence of x2apic
Impact: cleanup, paranoia

We were not clearing the local APIC in clear_local_APIC() in the
presence of x2apic. Fix it.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Suresh Siddha   authored and   H. Peter Anvin   commited 2009-03-17 15:43:51 -07:00
cf6567fe40
x86, x2apic: use virtual wire A mode in disable_IO_APIC() with interrupt-remapping
Impact: make kexec work with x2apic

disable_IO_APIC() gets called during crashdump aswell, which configures the
IO-APIC/LAPIC so that legacy interrupts can be delivered for the kexec'd kernel.

In the presence of interrupt-remapping, we need to change the
interrupt-remapping configuration aswell as modifying IO-APIC for virtual wire
B mode.

To keep things simple during the crash, use virtual wire A mode
(for which we don't need to touch io-apic and interrupt-remapping tables).

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Suresh Siddha   authored and   H. Peter Anvin   commited 2009-03-17 15:42:28 -07:00
7c6d9f9785
x86, x2apic: enable fault handling for intr-remapping
Impact: interface augmentation (not yet used)

Enable fault handling flow for intr-remapping aswell. Fault handling
code now shared by both dma-remapping and intr-remapping.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Suresh Siddha   authored and   H. Peter Anvin   commited 2009-03-17 15:38:59 -07:00
9d783ba042
cpumask: remove x86 cpumask_t uses.
Impact: cleanup

We are removing cpumask_t in favour of struct cpumask: mainly as a
marker of what code is now CONFIG_CPUMASK_OFFSTACK-safe.

The only non-trivial change here is vector_allocation_domain():
explicitly clear the mask and set the first word, rather than using
assignment.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Rusty Russell   commited 2009-03-13 14:49:57 +10:30
73e907de7d
cpumask: remove cpumask_t assignment from vector_allocation_domain()
Impact: cleanup

It's not legal to do assignments into cpumask_var_t; they will soon be of
variable length.

So explicitly clear the mask and set the first word, rather than using
assignment.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Rusty Russell   commited 2009-03-13 14:49:56 +10:30
5c6cb5e2b1
cpumask: clean up summit's send_IPI functions
Impact: cleanup, remove cpumask from stack

summit_send_IPI_allbutself might as well call
default_send_IPI_mask_allbutself_logical().  Also change cpumask_t to
struct cpumask and &cpu_online_map to cpu_online_mask while here.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Rusty Russell   commited 2009-03-13 14:49:55 +10:30
70ba2b6a70
cpumask: use new cpumask functions throughout x86
Impact: cleanup

1) &cpu_online_map -> cpu_online_mask
2) first_cpu/next_cpu_nr -> cpumask_first/cpumask_next
3) cpu_*_map manipulation -> init_cpu_* / set_cpu_*

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Rusty Russell   commited 2009-03-13 14:49:54 +10:30
4f0628963c
cpumask: convert arch/x86/kernel/nmi.c's backtrace_mask to a cpumask_var_t
Impact: cleanup, reduce memory usage for CONFIG_CPUMASK_OFFSTACK=y

I *think* every path calls check_nmi_watchdog before using the
watchdog, so that's the right place for the initialization.

If that's wrong, we'll get a nice NULL-deref with
CONFIG_CPUMASK_OFFSTACK=y, and have uncovered another bug.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

Rusty Russell   commited 2009-03-13 14:49:49 +10:30
fcef8576d8
cpumask: remove dangerous CPU_MASK_ALL_PTR, &CPU_MASK_ALL.: x86
Impact: cleanup

(Thanks to Al Viro for reminding me of this, via Ingo)

CPU_MASK_ALL is the (deprecated) "all bits set" cpumask, defined as so:

	#define CPU_MASK_ALL (cpumask_t) { { ... } }

Taking the address of such a temporary is questionable at best,
unfortunately 321a8e9d (cpumask: add CPU_MASK_ALL_PTR macro) added
CPU_MASK_ALL_PTR:

	#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL)

Which formalizes this practice.  One day gcc could bite us over this
usage (though we seem to have gotten away with it so far).

So replace everywhere which used &CPU_MASK_ALL or CPU_MASK_ALL_PTR
with the modern "cpu_all_mask" (a real const struct cpumask *), and remove
CPU_MASK_ALL_PTR altogether.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Mike Travis <travis@sgi.com>

Rusty Russell   commited 2009-03-13 14:49:47 +10:30
101aaca1f3
Merge branch 'x86/mce2' into x86/core
Ingo Molnar   commited 2009-03-05 21:49:25 +01:00
caab36b593
Merge branch 'x86/core' into x86/mce2
H. Peter Anvin   commited 2009-03-03 21:05:42 -08:00
2e22ea7cea
x86_32: apic/numaq_32, fix section mismatch
Remove __cpuinitdata section placement for translation_table
structure, since it is referenced from a functions within .text.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-03-02 12:00:25 +01:00
b6122b3843
x86_32: apic/summit_32, fix section mismatch
Remove __init section placement for some functions/data, so that
we don't get section mismatch warnings.

Also make inline function instead of empty setup_summit macro.

[v2]
One of them was not caught by
DEBUG_SECTION_MISMATCH=y
magic. Fix it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-03-02 12:00:25 +01:00
2fcb1f1f38
x86_32: apic/es7000_32, fix section mismatch
Remove __init section placement for some functions, so that we don't
get section mismatch warnings.

[v2]:
2 of them were not caught by
DEBUG_SECTION_MISMATCH=y
magic. Fix it.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-03-02 12:00:24 +01:00
871d78c6d9
x86_32: apic/summit_32, fix cpu_mask_to_apicid
Perform same-cluster checking even for masks with all (nr_cpu_ids)
bits set and report correct apicid on success instead.

While at it, convert it to for_each_cpu and newer cpumask api.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-03-02 11:20:34 +01:00
fae176d6e0
x86_32: apic/es7000_32, fix cpu_mask_to_apicid
Perform same-cluster checking even for masks with all (nr_cpu_ids)
bits set and report BAD_APICID on failure.

While at it, convert it to for_each_cpu.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-03-02 11:20:33 +01:00
0edc0b324a
x86_32: apic/es7000_32, cpu_mask_to_apicid cleanup
Remove es7000_cpu_mask_to_apicid_cluster completely, because it's
almost the same as es7000_cpu_mask_to_apicid except 2 code paths.
One of them is about to be removed soon, the another should be
BAD_APICID (it's a fail path).

The _cluster one was not invoked on apic->cpu_mask_to_apicid_and
anyway, since there was no _cluster_and variant.

Also use newer cpumask functions.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-03-02 11:20:33 +01:00
c2b20cbd05
x86_32: apic/bigsmp_32, de-inline functions
The ones which go only into struct apic are de-inlined
by compiler anyway, so remove the inline specifier from them.

Afterwards, remove bigsmp_setup_portio_remap completely as it
is unused.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-03-02 11:20:32 +01:00
9694cd6c17
x86: fix !ACPI build for es7000_32.c
arch/x86/kernel/apic/es7000_32.c:702: error: 'es7000_acpi_madt_oem_check_cluster' undeclared here (not in a function)

Provide a es7000_acpi_madt_oem_check_cluster() definition in the !ACPI
case too.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Ingo Molnar   commited 2009-02-26 14:35:56 +01:00
3b900d4419
x86: apic: simplify secondary CPU wakeup methods, fix
Impact: build fix

init_deasserted is only available on SMP. Make the secondary-wakeup
function conditional on SMP.

Also clean up the file some.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Ingo Molnar   commited 2009-02-26 14:11:06 +01:00
0b1da1c8fc
x86: apic: simplify secondary CPU wakeup methods
Impact: cleanup

- rename apic->wakeup_cpu  to apic->wakeup_secondary_cpu, to
  make it apparent that this is an SMP-only method

- handle NULL ->wakeup_secondary_cpus to mean the default INIT
  wakeup sequence - this allows simplification of the APIC
  driver templates.

Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Ingo Molnar   commited 2009-02-26 13:58:26 +01:00
1f5bcabf1b
x86: remove update_apic from x86_quirks
Impact: cleanup

x86_quirks->update_apic() calling looks crazy. so try to remove it:

 1. every apic take wakeup_cpu member directly
 2. separate es7000_apic to es7000_apic_cluster
 3. use uv_wakeup_cpu directly

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Yinghai Lu   authored and   Ingo Molnar   commited 2009-02-26 06:32:25 +01:00
2b6163bf57
Merge branch 'x86/core' into x86/mce2
H. Peter Anvin   commited 2009-02-24 16:11:51 -08:00
638bee71c8
x86_32: summit_32, de-inline functions
The ones which go only into struct genapic are de-inlined
by compiler anyway, so remove the inline specifier from them.

Afterwards, remove summit_setup_portio_remap completely as it
is unused.

Remove inline also from summit_cpu_mask_to_apicid, since it's
not worth it (it is used in struct genapic too).

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-02-24 22:07:51 +01:00
b5f26d0556
x86_32: summit_32, use BAD_APICID
Use BAD_APICID instead of 0xFF constants in summit_cpu_mask_to_apicid.

Also remove bogus comments about what we actually return.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Jiri Slaby   authored and   Ingo Molnar   commited 2009-02-24 22:07:51 +01:00
10b614eaa8
x86: refactor x86_quirks support
Impact: cleanup

Make x86_quirks support more transparent. The highlevel
methods are now named:

  extern void x86_quirk_pre_intr_init(void);
  extern void x86_quirk_intr_init(void);

  extern void x86_quirk_trap_init(void);

  extern void x86_quirk_pre_time_init(void);
  extern void x86_quirk_time_init(void);

This makes it clear that if some platform extension has to
do something here that it is considered ... weird, and is
discouraged.

Also remove arch_hooks.h and move it into setup.h (and other
header files where appropriate).

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Ingo Molnar   commited 2009-02-23 00:08:11 +01:00
8e6dafd6c7
Merge branch 'linus' into x86/apic
Conflicts:
	arch/x86/mach-default/setup.c

Semantic conflict resolution:
	arch/x86/kernel/setup.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

Ingo Molnar   commited 2009-02-22 20:05:19 +01:00
fc6fc7f1b1