VBUS can be detected via a dedicated PMIC pin. Add support
for reporting the VBUS status.
Change-Id: If1739017f33a502df1c15ca720f9df830e66bfbd
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
* 4.9/tmp-8cca21f:
Linux 4.9.65
mm/pagewalk.c: report holes in hugetlb ranges
coda: fix 'kernel memory exposure attempt' in fsync
mm/page_alloc.c: broken deferred calculation
ipmi: fix unsigned long underflow
ocfs2: should wait dio before inode lock in ocfs2_setattr()
ocfs2: fix cluster hang after a node dies
dmaengine: dmatest: warn user when dma test times out
serial: 8250_fintek: Fix finding base_port with activated SuperIO
serial: omap: Fix EFR write on RTS deassertion
ima: do not update security.ima if appraisal status is not INTEGRITY_PASS
crypto: dh - Fix double free of ctx->p
crypto: dh - fix memleak in setkey
net/sctp: Always set scope_id in sctp_inet6_skb_msgname
fealnx: Fix building error on MIPS
sctp: do not peel off an assoc from one netns to another one
af_netlink: ensure that NLMSG_DONE never fails in dumps
vlan: fix a use-after-free in vlan_device_event()
net: usb: asix: fill null-ptr-deref in asix_suspend
qmi_wwan: Add missing skb_reset_mac_header-call
net: qmi_wwan: fix divide by 0 on bad descriptors
net: cdc_ether: fix divide by 0 on bad descriptors
bonding: discard lowest hash bit for 802.3ad layer3+4
netfilter/ipvs: clear ipvs_property flag when SKB net namespace changed
tcp: do not mangle skb->cb[] in tcp_make_synack()
net: vrf: correct FRA_L3MDEV encode type
tcp_nv: fix division by zero in tcpnv_acked()
Linux 4.9.64
staging: greybus: spilib: fix use-after-free after deregistration
brcmfmac: don't preset all channels as disabled
x86/MCE/AMD: Always give panic severity for UC errors in kernel context
USB: serial: garmin_gps: fix memory leak on probe errors
USB: serial: garmin_gps: fix I/O after failed probe and remove
USB: serial: qcserial: add pid/vid for Sierra Wireless EM7355 fw update
usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
USB: Add delay-init quirk for Corsair K70 LUX keyboards
USB: usbfs: compute urb->actual_length for isochronous
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
Revert "dt-bindings: Add LEGO MINDSTORMS EV3 compatible specification"
Revert "dt-bindings: Add vendor prefix for LEGO"
uapi: fix linux/rds.h userspace compilation errors
uapi: fix linux/rds.h userspace compilation error
Revert "uapi: fix linux/rds.h userspace compilation errors"
Revert "crypto: xts - Add ECB dependency"
MIPS: Netlogic: Exclude netlogic,xlp-pic code from XLR builds
MIPS: traps: Ensure L1 & L2 ECC checking match for CM3 systems
MIPS: init: Ensure reserved memory regions are not added to bootmem
MIPS: init: Ensure bootmem does not corrupt reserved memory
MIPS: End asm function prologue macros with .insn
staging: greybus: add host device function pointer checks
staging: wilc1000: Fix endian sparse warning
staging: rtl8712: fixed little endian problem
ixgbe: do not disable FEC from the driver
ixgbe: add mask for 64 RSS queues
ixgbe: Reduce I2C retry count on X550 devices
ixgbe: Fix reporting of 100Mb capability
ixgbe: handle close/suspend race with netif_device_detach/present
ixgbe: fix AER error handling
ixgbe: Configure advertised speeds correctly for KR/KX backplane
arm64: dts: NS2: reserve memory for Nitro firmware
ALSA: hda/realtek - Add new codec ID ALC299
gpu: drm: mgag200: mgag200_main:- Handle error from pci_iomap
backlight: adp5520: Fix error handling in adp5520_bl_probe()
backlight: lcd: Fix race condition during register
drm/omap: panel-sony-acx565akm.c: Add MODULE_ALIAS
ALSA: vx: Fix possible transfer overflow
ALSA: vx: Don't try to update capture stream before running
power: supply: axp288_fuel_gauge: Read 12 bit values 2 registers at a time
power: supply: axp288_fuel_gauge: Read 15 bit values 2 registers at a time
rtc: rx8010: change lock mechanism
scsi: lpfc: Clear the VendorVersion in the PLOGI/PLOGI ACC payload
scsi: lpfc: Correct issue leading to oops during link reset
scsi: lpfc: Correct host name in symbolic_name field
scsi: lpfc: FCoE VPort enable-disable does not bring up the VPort
scsi: lpfc: Add missing memory barrier
x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers
staging: rtl8188eu: fix incorrect ERROR tags from logs
tcp: provide timestamps for partial writes
scsi: ufs: add capability to keep auto bkops always enabled
scsi: ufs-qcom: Fix module autoload
igb: Fix hw_dbg logging in igb_update_flash_i210
igb: close/suspend race in netif_device_detach
igb: reset the PHY before reading the PHY ID
drm/sti: sti_vtg: Handle return NULL error from devm_ioremap_nocache
ata: SATA_MV should depend on HAS_DMA
ata: SATA_HIGHBANK should depend on HAS_DMA
ata: ATA_BMDMA should depend on HAS_DMA
ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC
ARM: dts: Fix omap3 off mode pull defines
ARM: OMAP2+: Fix init for multiple quirks for the same SoC
ARM: dts: Fix am335x and dm814x scm syscon to probe children
ARM: dts: Fix compatible for ti81xx uarts for 8250
fm10k: request reset when mbx->state changes
extcon: palmas: Check the parent instance to prevent the NULL
extcon: Remove potential problem when calling extcon_register_notifier()
Bluetooth: btusb: fix QCA Rome suspend/resume
arm: crypto: reduce priority of bit-sliced AES cipher
media: dib0700: fix invalid dvb_detach argument
media: imon: Fix null-ptr-deref in imon_probe
Linux 4.9.63
misc: panel: properly restore atomic counter on error path
qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2)
target/iscsi: Fix iSCSI task reassignment handling
brcmfmac: remove setting IBSS mode when stopping AP
security/keys: add CONFIG_KEYS_COMPAT to Kconfig
netfilter: nat: Revert "netfilter: nat: convert nat bysrc hash to rhashtable"
netfilter: nat: avoid use of nf_conn_nat extension
Revert "ARM: dts: imx53-qsb-common: fix FEC pinmux config"
ALSA: seq: Cancel pending autoload work at unbinding device
Input: ims-psu - check if CDC union descriptor is sane
usb: usbtest: fix NULL pointer dereference
mac80211: don't compare TKIP TX MIC key in reinstall prevention
mac80211: use constant time comparison with keys
mac80211: accept key reinstall without changing anything
ppp: fix race in ppp device destruction
net_sched: avoid matching qdisc with zero handle
sctp: reset owner sk for data chunks on out queues when migrating a sock
tun: allow positive return values on dev_get_valid_name() call
ip6_gre: update dst pmtu if dev mtu has been updated by toobig in __gre6_xmit
ip6_gre: only increase err_count for some certain type icmpv6 in ip6gre_err
ipip: only increase err_count for some certain type icmp in ipip_err
tap: double-free in error path in tap_open()
net/unix: don't show information about sockets from other namespaces
tcp/dccp: fix other lockdep splats accessing ireq_opt
tcp/dccp: fix lockdep splat in inet_csk_route_req()
sctp: full support for ipv6 ip_nonlocal_bind & IP_FREEBIND
ipv6: flowlabel: do not leave opt->tot_len with garbage
soreuseport: fix initialization race
packet: avoid panic in packet_getsockopt()
tcp/dccp: fix ireq->opt races
sctp: add the missing sock_owned_by_user check in sctp_icmp_redirect
tun: call dev_get_valid_name() before register_netdevice()
l2tp: check ps->sock before running pppol2tp_session_ioctl()
tcp: fix tcp_mtu_probe() vs highest_sack
net: call cgroup_sk_alloc() earlier in sk_clone_lock()
netlink: do not set cb_running if dump's start() errs
ipv6: addrconf: increment ifp refcount before ipv6_del_addr()
tun/tap: sanitize TUNSETSNDBUF input
gso: fix payload length when gso_size is zero
FROMLIST: binder: fix proc->files use-after-free
Conflicts:
drivers/scsi/ufs/ufshcd.h
include/net/netfilter/nf_conntrack.h
Change-Id: I38fd3aa5f077a7bde0a8de4ebe9dc9316075f199
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
[ Upstream commit 9fe172b9be532acc23e35ba693700383ab775e66 ]
extcon-palmas must be child of palmas and expects parent's
drvdata to be valid. Check for non NULL parent drvdata and
fail if it is NULL. Not doing so will result in a NULL
pointer dereference later in the probe() parent drvdata
is NULL (e.g. misplaced extcon-palmas node in device tree).
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Roger Quadrosauthored and Greg Kroah-Hartmancommited 2017-11-21 09:23:21 +01:00
[ Upstream commit 01b4c9a1ae07a25d208cad0da7dd288007a22984 ]
This patch removes the potential problem of extcon_register_notifier()
when edev parameter is NULL. When edev is NULL, this function returns
the first extcon device which includes the sepecific external connector
of second paramter. But, it don't guarantee the same operation in all cases.
To remove this confusion and potential problem, this patch fixes it.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chanwoo Choiauthored and Greg Kroah-Hartmancommited 2017-11-21 09:23:21 +01:00
* 4.9/tmp-05a906d:
Linux 4.9.56
Revert "socket, bpf: fix possible use after free"
Linux 4.9.55
KVM: x86: fix singlestepping over syscall
f2fs: don't allow encrypted operations without keys
ext4: don't allow encrypted operations without keys
ext4: Don't clear SGID when inheriting ACLs
ext4: fix data corruption for mmap writes
vfs: deny copy_file_range() for non regular files
sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs
mmc: core: add driver strength selection when selecting hs400es
nvme-pci: Use PCI bus address for data/queues in CMB
drm/i915/bios: ignore HDMI on port A
brcmfmac: setup passive scan if requested by user-space
brcmfmac: add length check in brcmf_cfg80211_escan_handler()
scsi: sd: Do not override max_sectors_kb sysfs setting
iwlwifi: add workaround to disable wide channels in 5GHz
iwlwifi: mvm: use IWL_HCMD_NOCOPY for MCAST_FILTER_CMD
netlink: fix nla_put_{u8,u16,u32} for KASAN
rocker: fix rocker_tlv_put_* functions for KASAN
HID: wacom: bits shifted too much for 9th and 10th buttons
HID: wacom: Always increment hdev refcount within wacom_get_hdev_data
HID: wacom: leds: Don't try to control the EKR's read-only LEDs
HID: i2c-hid: allocate hid buffers for real worst case
ftrace: Fix kmemleak in unregister_ftrace_graph
stm class: Fix a use-after-free
Drivers: hv: fcopy: restore correct transfer length
driver core: platform: Don't read past the end of "driver_override" buffer
percpu: make this_cpu_generic_read() atomic w.r.t. interrupts
powerpc/tm: Fix illegal TM state in signal handler
powerpc/64s: Use emergency stack for kernel TM Bad Thing program checks
socket, bpf: fix possible use after free
net: rtnetlink: fix info leak in RTM_GETSTATS call
tipc: use only positive error codes in messages
ip6_tunnel: update mtu properly for ARPHRD_ETHER tunnel device in tx path
ip6_gre: ip6gre_tap device should keep dst
netlink: do not proceed if dump's start() errs
net: Set sk_prot_creator when cloning sockets to the right proto
packet: only test po->has_vnet_hdr once in packet_snd
packet: in packet_do_bind, test fanout with bind_lock held
net: dsa: Fix network device registration order
tun: bail out from tun_get_user() if the skb is empty
l2tp: fix race condition in l2tp_tunnel_delete
l2tp: Avoid schedule while atomic in exit_net
vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmit
net: qcom/emac: specify the correct size when mapping a DMA buffer
net_sched: always reset qdisc backlog in qdisc_reset()
isdn/i4l: fetch the ppp_write buffer in one shot
bpf: one perf event close won't free bpf program attached by another perf event
packet: hold bind lock when rebinding to fanout hook
net: emac: Fix napi poll list corruption
tcp: fastopen: fix on syn-data transmit failure
net/sched: cls_matchall: fix crash when used with classful qdisc
ip6_tunnel: do not allow loading ip6_tunnel if ipv6 is disabled in cmdline
net: phy: Fix mask value write on gmii2rgmii converter speed register
ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_header
udpv6: Fix the checksum computation when HW checksum does not apply
tcp: fix data delivery rate
bpf/verifier: reject BPF_ALU64|BPF_END
tcp: update skb->skb_mstamp more carefully
sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
net: sched: fix use-after-free in tcf_action_destroy and tcf_del_walker
mlxsw: spectrum: Prevent mirred-related crash on removal
ALSA: usx2y: Suppress kernel warning at page allocation failures
Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members"
ALSA: compress: Remove unused variable
lsm: fix smack_inode_removexattr and xattr_getsecurity memleak
lib/ratelimit.c: use deferred printk() version
mm, oom_reaper: skip mm structs with mmu notifiers
staging: vchiq_2835_arm: Fix NULL ptr dereference in free_pagelist
uwb: ensure that endpoint is interrupt
uwb: properly check kthread_run return value
iio: adc: mcp320x: Fix oops on module unload
iio: adc: mcp320x: Fix readout of negative voltages
iio: ad7793: Fix the serial interface reset
IIO: BME280: Updates to Humidity readings need ctrl_reg write!
iio: core: Return error for failed read_reg
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
iio: ad_sigma_delta: Implement a dedicated reset function
iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
Revert "xhci: Limit USB2 port wake support for AMD Promontory hosts"
xhci: set missing SuperSpeedPlus Link Protocol bit in roothub descriptor
xhci: Fix sleeping with spin_lock_irq() held in ASmedia 1042A workaround
xhci: fix finding correct bus_state structure for USB 3.1 hosts
USB: fix out-of-bounds in usb_set_configuration
usb: Increase quirk delay for USB devices
USB: core: harden cdc_parse_cdc_header
USB: uas: fix bug in handling of alternate settings
USB: g_mass_storage: Fix deadlock when driver is unbound
usb: gadget: mass_storage: set msg_registered after msg registered
USB: devio: Don't corrupt user memory
USB: dummy-hcd: Fix erroneous synchronization change
USB: dummy-hcd: fix infinite-loop resubmission bug
USB: dummy-hcd: fix connection failures (wrong speed)
USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponse
usb: pci-quirks.c: Corrected timeout values used in handshake
ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
usb-storage: fix bogus hardware error messages for ATA pass-thru devices
usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
usb: gadget: udc: renesas_usb3: Fix return value of usb3_write_pipe()
usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value
usb: gadget: udc: renesas_usb3: fix for no-data control transfer
usb: gadget: udc: atmel: set vbus irqflags explicitly
USB: gadgetfs: fix copy_to_user while holding spinlock
USB: gadgetfs: Fix crash caused by inadequate synchronization
Linux 4.9.54
s390/mm: make pmdp_invalidate() do invalidation only
ttpci: address stringop overflow warning
ALSA: au88x0: avoid theoretical uninitialized access
ASoC: rt5660: remove double const
ASoC: rt5659: drop double const
ASoC: rt5514: fix gcc-7 warning
ARM: remove duplicate 'const' annotations'
IB/qib: fix false-postive maybe-uninitialized warning
tools/power turbostat: bugfix: GFXMHz column not changing
ARM: dts: BCM5301X: Fix memory start address
libata: transport: Remove circular dependency at free time
ASoC: wm_adsp: Return an error on write to a disabled volatile control
xfs: remove kmem_zalloc_greedy
i2c: meson: fix wrong variable usage in meson_i2c_put_data
netfilter: nf_tables: set pktinfo->thoff at AH header if found
md/raid10: submit bio directly to replacement disk
rds: ib: add error handle
mm/cgroup: avoid panic when init with low memory
iommu/io-pgtable-arm: Check for leaf entry before dereferencing it
x86/acpi: Restore the order of CPU IDs
cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
ibmvnic: Free tx/rx scrq pointer array when releasing sub-crqs
nfs: make nfs4_cb_sv_ops static
parisc: perf: Fix potential NULL pointer dereference
netfilter: nfnl_cthelper: fix incorrect helper->expect_class_max
nvme-rdma: handle cpu unplug when re-establishing the controller
MIPS: smp-cps: Fix retrieval of VPE mask on big endian CPUs
exynos-gsc: Do not swap cb/cr for semi planar formats
iommu/exynos: Block SYSMMU while invalidating FLPD cache
MIPS: IRQ Stack: Unwind IRQ stack onto task stack
netfilter: invoke synchronize_rcu after set the _hook_ to NULL
drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
kasan: do not sanitize kexec purgatory
hugetlbfs: initialize shared policy as part of inode allocation
sata_via: Enable hotplug only on VT6421
Btrfs: fix potential use-after-free for cloned bio
Btrfs: fix segmentation fault when doing dio read
bridge: netlink: register netdevice before executing changelink
mmc: sdio: fix alignment issue in struct sdio_func
qed: Fix possible system hang in the dcbnl-getdcbx() path.
net: dsa: b53: Include IMP/CPU port in dumb forwarding mode
udp: disable inner UDP checksum offloads in IPsec case
usb: plusb: Add support for PL-27A1
team: fix memory leaks
net/packet: check length in getsockopt() called with PACKET_HDRLEN
net: core: Prevent from dereferencing null pointer when releasing SKB
lkdtm: Fix Oops when unloading the module
mips: ath79: clock:- Unmap region obtained by of_iomap
MIPS: Lantiq: Fix another request_mem_region() return code check
HID: wacom: release the resources before leaving despite devm
drm: mali-dp: Fix transposed horizontal/vertical flip
drm: mali-dp: Fix destination size handling when rotating
ASoC: dapm: fix some pointer error handling
rtl8xxxu: Add additional USB IDs for rtl8192eu devices
usb: chipidea: vbus event may exist before starting gadget
iommu/arm-smmu: Set privileged attribute to 'default' instead of 'unprivileged'
spi: pxa2xx: Add support for Intel Gemini Lake
ath10k: prevent sta pointer rcu violation
audit: log 32-bit socketcalls
ASoC: dapm: handle probe deferrals
partitions/efi: Fix integer overflow in GPT size calculation
sfc: get PIO buffer size from the NIC
USB: serial: mos7840: fix control-message error handling
USB: serial: mos7720: fix control-message error handling
drm/amdkfd: fix improper return value on error
arm: dts: mt2701: Add subsystem clock controller device nodes
IB/ipoib: Replace list_del of the neigh->list with list_del_init
IB/ipoib: rtnl_unlock can not come after free_netdev
IB/ipoib: Fix deadlock over vlan_mutex
serial: 8250_port: Remove dangerous pr_debug()
tty: goldfish: Fix a parameter of a call to free_irq
serial: 8250: moxa: Store num_ports in brd
drm/i915/psr: disable psr2 for resolution greater than 32X20
ARM: 8635/1: nommu: allow enabling REMAP_VECTORS_TO_RAM
IB/rxe: Fix a MR reference leak in check_rkey()
IB/rxe: Add a runtime check in alloc_index()
iio: adc: hx711: Add DT binding for avia,hx711
iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications
iio: adc: imx25-gcq: Fix module autoload
hwmon: (gl520sm) Fix overflows and crash seen when writing into limit attributes
usb: make the MTK XHCI driver compile for older MIPS SoCs
clk/axs10x: Clear init field in driver probe
sh_eth: use correct name for ECMR_MPDE bit
reset: ti_syscon: fix a ti_syscon_reset_status issue
extcon: axp288: Use vbus-valid instead of -present to determine cable presence
igb: re-assign hw address pointer on reset after PCI error
ARM: dts: am335x-chilisom: Wakeup from RTC-only state by power on event
scsi: be2iscsi: Add checks to validate CID alloc/free
power: supply: axp288_fuel_gauge: Fix fuel_gauge_reg_readb return on error
MIPS: ralink: Fix incorrect assignment on ralink_soc
MIPS: ralink: Fix a typo in the pinmux setup.
MIPS: Ensure bss section ends on a long-aligned address
ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for msiof nodes
RDS: RDMA: Fix the composite message user notification
clk: sunxi-ng: fix PLL_CPUX adjusting on H3
ARM: dts: exynos: Add CPU OPPs for Exynos4412 Prime
drm/i915: Fix the overlay frontbuffer tracking
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
drm: bridge: add DT bindings for TI ths8135
drm_fourcc: Fix DRM_FORMAT_MOD_LINEAR #define
FROMLIST: binder: fix use-after-free in binder_transaction()
FROMLIST: binder: fix an ret value override
FROMLIST: binder: fix memory corruption in binder_transaction binder
Conflicts:
mm/oom_kill.c
sound/usb/card.c
Change-Id: I8b32fbdaa2be959a4149cf07d0bda16b75eeacbc
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
[ Upstream commit 5757aca10146061befd168dab37fb0db1ccd8f73 ]
The vbus-present bit in the power status register also gets set to 1
when a usb-host cable (id-pin shorted to ground) is plugged in and a 5v
boost converter is supplying 5v to the otg usb bus.
This causes a "disconnect or unknown or ID event" warning in dmesg as
well as the extcon device to report the last detected charger cable
type as being connected even though none is connected.
This commit switches to checking the vbus-valid bit instead, which is
only 1 when both vbus is present and the vbus-path is enabled in the
vbus-path control register (the vbus-path gets disabled when a usb-host
cable is detected, to avoid the pmic drawing power from the 5v boost
converter).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goedeauthored and Greg Kroah-Hartmancommited 2017-10-08 10:26:03 +02:00
extcon-gpio driver currently doesn't support passing the platfroom data via
device tree, we are adding this support so extcon-gpio driver can be used
with platforms using the DT from platform data. We are also fixing the
issue where we were passing the supported_cable incorrect way to
extcon_dev_allocate() API.
Change-Id: I035c2f6c43d6c5140bc9a3088da7c1b3f2f108f1
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Driver can now work with both ID and VBUS pins or either one of
them.
There can be the following 3 cases
1) Both ID and VBUS GPIOs are available:
ID = LOW -> USB_HOST active, USB inactive
ID = HIGH -> USB_HOST inactive, USB state is same as VBUS.
2) Only ID GPIO is available:
ID = LOW -> USB_HOST active, USB inactive
ID = HIGH -> USB_HOST inactive, USB active
3) Only VBUS GPIO is available:
VBUS = LOW -> USB_HOST inactive, USB inactive
VBUS = HIGH -> USB_HOST inactive, USB active
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Change-Id: I5082959fb71679ffeafc3a8db48a714b8617467b
Git-commit: 541332a13b1ded42097ba96c52c7bc70931e528c
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
[jackp@codeaurora.org: Fixed checkpatch.pl style warnings]
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Roger Quadrosauthored and Jack Phamcommited 2017-04-12 13:21:23 -07:00
commit 5b11ebedd6a8bb4271b796e498cd15c0fe1133b6 upstream.
Function get_zeroed_page() returns a NULL pointer if there is no enough
memory. In function extcon_sync(), it returns 0 if the call to
get_zeroed_page() fails. The return value 0 indicates success in the
context, which is incosistent with the execution status. This patch
fixes the bug by returning -ENOMEM.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188611
Signed-off-by: Pan Bian <bianpan2016@163.com>
Fixes: a580982f08
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bianauthored and Greg Kroah-Hartmancommited 2017-01-19 20:18:03 +01:00
The driver was changed after submission to use the new style APIs
like extcon_set_state(). Unfortunately, that only sets the state,
and doesn't notify any consumers that the cable state has
changed. Use extcon_set_state_sync() here instead so that we
notify cable consumers of the state change. This fixes USB
host-device role switching on the db8074 platform.
Fixes: 38085c987f ("extcon: Add support for qcom SPMI PMIC USB id detection hardware")
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stephen Boydauthored and Chanwoo Choicommited 2016-10-26 16:04:29 +09:00
Some Qualcomm PMICs have a misc device that performs USB id pin
detection via an interrupt. When the interrupt triggers, we
should read the interrupt line to see if it has gone high or low.
If the interrupt is low then the ID pin is grounded, and if the
interrupt is high then the ID pin is being held high.
Cc: Roger Quadros <rogerq@ti.com>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
[cw00.choi: Edited the driver description and added the author information]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stephen Boydauthored and Chanwoo Choicommited 2016-09-13 11:26:26 +09:00
This patch alters the renamed extcon API to set the state of the external
connectors instead of deprecated extcon_set_cable_state_().
Because the patch[1] modifies the function name to maintain the function
naming pattern.
- extcon_set_cable_state_() -> extcon_set_state_sync()
- extcon_get_cable_state_() -> extcon_get_state()
[1] https://lkml.org/lkml/2016/8/4/729
- extcon: Rename the extcon_set/get_state() to maintain the function naming pattern
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Roger Quadros <rogerq@ti.com>
This patch fixes the spelling mistake in dev_dbg messages.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
[cw00.choi: Modify the patch title/description]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Colin Ian Kingauthored and Chanwoo Choicommited 2016-09-13 11:26:26 +09:00
Change my email address to kernel.org instead of Samsung one for the
purpose of any future contact. The copyrights remain untouched and are
attributed to Samsung.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Krzysztof Kozlowskiauthored and Chanwoo Choicommited 2016-09-13 11:26:26 +09:00
This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1].
The Wireless Power Transfer is the transmission of electronical energy
from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG.
[1] https://en.wikipedia.org/wiki/Wireless_power_transfer
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:57 +05:30
This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device.
The HMD device is usually for USB connector type So, the HMD connector
has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB.
[1] https://en.wikipedia.org/wiki/Head-mounted_display
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:56 +05:30
Add EXTCON_DISP_DP for the Display external connector. For Type-C
connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
Alt Mode on USB Type-C Standard). The Type-C support both normal
and flipped orientation, so add a property to extcon.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Chris Zhongauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:55 +05:30
This patch adds the synchronization extcon APIs to support the notifications
for both state and property. When extcon_*_sync() functions is called,
the extcon informs the information from extcon provider to extcon client.
The extcon driver may need to change the both state and multiple properties
at the same time. After setting the data of a external connector,
the extcon send the notification to client driver with the extcon_*_sync().
The list of new extcon APIs as following:
- extcon_sync() : Send the notification for each external connector to
synchronize the information between extcon provider driver
and extcon client driver.
- extcon_set_state_sync() : Set the state of external connector with noti.
- extcon_set_property_sync() : Set the property of external connector with noti.
For example,
case 1, change the state of external connector and synchronized the data.
extcon_set_state_sync(edev, EXTCON_USB, 1);
case 2, change both the state and property of external connector
and synchronized the data.
extcon_set_state(edev, EXTCON_USB, 1);
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1);
extcon_sync(edev, EXTCON_USB);
case 3, change the property of external connector and synchronized the data.
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
extcon_sync(edev, EXTCON_USB);
case 4, change the property of external connector and synchronized the data.
extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:54 +05:30
This patch just renames the existing extcon_get/set_cable_state_()
as following because of maintaining the function naming pattern
like as extcon APIs for property.
- extcon_set_cable_state_() -> extcon_set_state()
- extcon_get_cable_state_() -> extcon_get_state()
But, this patch remains the old extcon_set/get_cable_state_() functions
to prevent the build break. After altering new APIs, remove the old APIs.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:53 +05:30
This patch adds the support of the property capability setting. This function
decides the supported properties of each external connector on extcon provider
driver.
Ths list of new extcon APIs to get/set the capability of property as following:
- int extcon_get_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
- int extcon_set_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:52 +05:30
This patch support the extcon property for the external connector
because each external connector might have the property according to
the H/W design and the specific characteristics.
- EXTCON_PROP_USB_[property name]
- EXTCON_PROP_CHG_[property name]
- EXTCON_PROP_JACK_[property name]
- EXTCON_PROP_DISP_[property name]
Add the new extcon APIs to get/set the property value as following:
- int extcon_get_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value *prop_val)
- int extcon_set_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value prop_val)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:51 +05:30
This patch adds the new extcon type to group the each connecotr
into following five category. This type would be used to handle
the connectors as a group unit instead of a connector unit.
- EXTCON_TYPE_USB : USB connector
- EXTCON_TYPE_CHG : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector
Also, each external connector is possible to belong to one more extcon type.
In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:51 +05:30
This patch fixes below compilation warning:-
drivers/extcon/extcon.c: In function extcon_register_notifier:
drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized]
if (idx >= 0) {
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[cw00.choi : Modify the patch title using the a captical letter for first char]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Maninder Singhauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:50 +05:30
This patch restrict the usage of extcon_update_state() in the extcon
core because the extcon_update_state() use the bit masking to change
the state of external connector. When this function is used in device drivers,
it may occur the probelm with the handling mistake of bit masking.
Also, this patch removes the extcon_get/set_state() functions because these
functions use the bit masking which is reluctant way. Instead, extcon
provides the extcon_set/get_cable_state_() functions.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:49 +05:30
This patch removes the state_store() which change the state of external
connectors with bit masking on user-space. It is wrong access to modify
the change the state of external connectors.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:48 +05:30
This patch removes the usage of extcon_set_state() because it uses
the bit masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set_cable_state_() with extcon id.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:47 +05:30
This patch removes the usage of extcon_set_state() because it uses the bit
masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set/get_cable_state_() with extcon id.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:46 +05:30
This patch remvoes the usage of extcon_update_state() because
the extcon_update_state() use directly the bit masking calculation
to change the state of external connector without the unique id of
external connector. It makes the code diffcult to read it.
So, this patch uses the extcon_set_cable_state_() instead.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Chanwoo Choiauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:45 +05:30
There is no need for a semi-colon at the end of a switch statement so
remove it.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Charles Keepaxauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:44 +05:30
Sometimes drivers may call this API and expect it to fail because
the extcon they're looking for is optional. Let's move these
prints to debug level so it doesn't look like there's a problem
when there isn't one.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stephen Boydauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:43 +05:30
Update cable state during boot to avoid any missing
external cable events occurred before driver initialisation.
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Venkat Reddy Tallaauthored and Kishon Vijay Abraham Icommited 2016-09-10 16:48:42 +05:30
This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1].
The Wireless Power Transfer is the transmission of electronical energy
from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG.
[1] https://en.wikipedia.org/wiki/Wireless_power_transfer
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device.
The HMD device is usually for USB connector type So, the HMD connector
has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB.
[1] https://en.wikipedia.org/wiki/Head-mounted_display
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Add EXTCON_DISP_DP for the Display external connector. For Type-C
connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
Alt Mode on USB Type-C Standard). The Type-C support both normal
and flipped orientation, so add a property to extcon.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Chris Zhongauthored and Chanwoo Choicommited 2016-08-08 11:17:23 +09:00
This patch adds the synchronization extcon APIs to support the notifications
for both state and property. When extcon_*_sync() functions is called,
the extcon informs the information from extcon provider to extcon client.
The extcon driver may need to change the both state and multiple properties
at the same time. After setting the data of a external connector,
the extcon send the notification to client driver with the extcon_*_sync().
The list of new extcon APIs as following:
- extcon_sync() : Send the notification for each external connector to
synchronize the information between extcon provider driver
and extcon client driver.
- extcon_set_state_sync() : Set the state of external connector with noti.
- extcon_set_property_sync() : Set the property of external connector with noti.
For example,
case 1, change the state of external connector and synchronized the data.
extcon_set_state_sync(edev, EXTCON_USB, 1);
case 2, change both the state and property of external connector
and synchronized the data.
extcon_set_state(edev, EXTCON_USB, 1);
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1);
extcon_sync(edev, EXTCON_USB);
case 3, change the property of external connector and synchronized the data.
extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
extcon_sync(edev, EXTCON_USB);
case 4, change the property of external connector and synchronized the data.
extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch just renames the existing extcon_get/set_cable_state_()
as following because of maintaining the function naming pattern
like as extcon APIs for property.
- extcon_set_cable_state_() -> extcon_set_state()
- extcon_get_cable_state_() -> extcon_get_state()
But, this patch remains the old extcon_set/get_cable_state_() functions
to prevent the build break. After altering new APIs, remove the old APIs.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch adds the support of the property capability setting. This function
decides the supported properties of each external connector on extcon provider
driver.
Ths list of new extcon APIs to get/set the capability of property as following:
- int extcon_get_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
- int extcon_set_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop);
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch support the extcon property for the external connector
because each external connector might have the property according to
the H/W design and the specific characteristics.
- EXTCON_PROP_USB_[property name]
- EXTCON_PROP_CHG_[property name]
- EXTCON_PROP_JACK_[property name]
- EXTCON_PROP_DISP_[property name]
Add the new extcon APIs to get/set the property value as following:
- int extcon_get_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value *prop_val)
- int extcon_set_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value prop_val)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch adds the new extcon type to group the each connecotr
into following five category. This type would be used to handle
the connectors as a group unit instead of a connector unit.
- EXTCON_TYPE_USB : USB connector
- EXTCON_TYPE_CHG : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector
Also, each external connector is possible to belong to one more extcon type.
In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
This patch fixes below compilation warning:-
drivers/extcon/extcon.c: In function extcon_register_notifier:
drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized]
if (idx >= 0) {
Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[cw00.choi : Modify the patch title using the a captical letter for first char]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Maninder Singhauthored and Chanwoo Choicommited 2016-08-08 10:58:37 +09:00
This patch restrict the usage of extcon_update_state() in the extcon
core because the extcon_update_state() use the bit masking to change
the state of external connector. When this function is used in device drivers,
it may occur the probelm with the handling mistake of bit masking.
Also, this patch removes the extcon_get/set_state() functions because these
functions use the bit masking which is reluctant way. Instead, extcon
provides the extcon_set/get_cable_state_() functions.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the state_store() which change the state of external
connectors with bit masking on user-space. It is wrong access to modify
the change the state of external connectors.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the usage of extcon_set_state() because it uses
the bit masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set_cable_state_() with extcon id.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch removes the usage of extcon_set_state() because it uses the bit
masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set/get_cable_state_() with extcon id.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This patch remvoes the usage of extcon_update_state() because
the extcon_update_state() use directly the bit masking calculation
to change the state of external connector without the unique id of
external connector. It makes the code diffcult to read it.
So, this patch uses the extcon_set_cable_state_() instead.
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
There is no need for a semi-colon at the end of a switch statement so
remove it.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Charles Keepaxauthored and Chanwoo Choicommited 2016-08-08 10:58:35 +09:00
Sometimes drivers may call this API and expect it to fail because
the extcon they're looking for is optional. Let's move these
prints to debug level so it doesn't look like there's a problem
when there isn't one.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Stephen Boydauthored and Chanwoo Choicommited 2016-08-08 10:58:35 +09:00
Update cable state during boot to avoid any missing
external cable events occurred before driver initialisation.
Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Venkat Reddy Tallaauthored and Chanwoo Choicommited 2016-08-08 10:58:35 +09:00
Anirudh Ghayal
commited 
Kyle Yan
commited 
Roger Quadros
authored and
Greg Kroah-Hartman
commited 
Chanwoo Choi
authored and
Hans de Goede
authored and
Mayank Rana
commited 
Subhash Jadavani
commited 
Jack Pham
commited 
Pan Bian
authored and
Stephen Boyd
authored and
Kishon Vijay Abraham I
commited 
Colin Ian King
authored and
Krzysztof Kozlowski
authored and
Chris Zhong
authored and
Maninder Singh
authored and
Charles Keepax
authored and
Venkat Reddy Talla
authored and