power_supply.h requires to forward declare few structures. One of them is done
at the top of the file and other one just before it is used. Declare them
together for better readability.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Viresh Kumarauthored and Sebastian Reichelcommited 2014-09-16 11:01:28 +02:00
Usually PMIC's come with coulomb counting mechanism which can be
used to implement a Fuel Gauginig solution in Software itself.
One of key input to these SW Fuel Gauge solutioons is the boot up
parameters like boot voltage and boot current.
This patch adds the VOLTAGE_BOOT and CURRENT_BOOT power supply attributes
to report bootup voltage and current.
This patch also adds CALIBRATE power supply attribute which useful is
for calibrating the battery/coulomb counter.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Ramakrishna Pallalaauthored and Sebastian Reichelcommited 2014-09-06 21:05:04 +02:00
Add new power supply properties for input current, charge termination
current, min and max temperature
POWER_SUPPLY_PROP_TEMP_MIN - minimum operatable temperature
POWER_SUPPLY_PROP_TEMP_MAX - maximum operatable temperature
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT - input current limit programmed
by charger. Indicates the input current for a charging source.
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT - Charge termination current used
to detect the end of charge condition
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Jenny TCauthored and Sebastian Reichelcommited 2014-07-18 23:40:23 +02:00
Currently, all the power supply devices are registered with wakeup source,
this results in that every power_supply_changed() invocation brings
the system out of suspend-to-freeze state.
This is overkill as some device drivers, e.g. ACPI battery driver,
have the ability to check the device status and wake up the system
from sleeping only when necessary.
Thus introduce a new API which allows device to be registered
w/o wakeup source.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zhang Ruiauthored and Rafael J. Wysockicommited 2014-05-30 13:45:25 +02:00
Add method to get power supply by device tree phandle.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Sebastian Reichelauthored and Anton Vorontsovcommited 2013-12-23 18:21:11 -08:00
This patch adds a notifier chain to the power_supply, this helps drivers
in other subsystem to listen to changes in power supply subsystem.
This would help to take some actions in those drivers on changing the
power supply properties. One such scenario is to increase/decrease system
performance based on the battery capacity/voltage. Another scenario is to
adjust the h/w peak current detection voltage/current thresholds based on
battery voltage/capacity. The notifier helps drivers to listen to changes
in power_suppy susbystem without polling the power_supply properties
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Pali Rohárauthored and Anton Vorontsovcommited 2013-12-01 14:27:24 -08:00
This patch, originally authored by Arve Hjonnevag and Todd Poynor,
prevents the system from entering suspend mode until the power supply
plug, unplug, or any other change of state event is fully processed. This
guarantees that the screen lights up and displays the battery charging
state. The implementation uses the power supply wakeup_source object.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Arve Hjonnevag <arve@android.com>
Cc: Todd Poynor <toddpoynor@google.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Zoran Markovicauthored and Anton Vorontsovcommited 2013-08-27 18:42:48 -07:00
Similar to linux/device.h, move of_node struct member out of the #ifdef
CONFIG_OF so that the drivers won't have to mess with #ifdefs in .c files.
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Anton Vorontsovcommited 2013-06-28 18:20:52 -07:00
With this patch the power_supply_core will try to populate supplied_from
hierarchy from the device tree.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Rhyland Kleinauthored and Anton Vorontsovcommited 2013-04-16 18:51:16 -07:00
This patch adds support for supplies to register a list of char *'s which
represent the list of supplies which supply them. This is the opposite as
the supplied_to list.
This change maintains support for supplied_to until all drivers which make
use of it already are converted.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Rhyland Kleinauthored and Anton Vorontsovcommited 2013-04-16 18:35:31 -07:00
Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers all
over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
If you need me to provide a merged tree to handle these resolutions,
please let me know.
Other than those patches, there's not much here, some minor fixes and
updates.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlEmV0cACgkQMUfUDdst+yncCQCfbmnQZju7kzWXk6PjdFuKspT9
weAAoMCzcAtEzzc4LXuUxxG/sXBVBCjW
=yWAQ
-----END PGP SIGNATURE-----
Merge tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core patches from Greg Kroah-Hartman:
"Here is the big driver core merge for 3.9-rc1
There are two major series here, both of which touch lots of drivers
all over the kernel, and will cause you some merge conflicts:
- add a new function called devm_ioremap_resource() to properly be
able to check return values.
- remove CONFIG_EXPERIMENTAL
Other than those patches, there's not much here, some minor fixes and
updates"
Fix up trivial conflicts
* tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits)
base: memory: fix soft/hard_offline_page permissions
drivercore: Fix ordering between deferred_probe and exiting initcalls
backlight: fix class_find_device() arguments
TTY: mark tty_get_device call with the proper const values
driver-core: constify data for class_find_device()
firmware: Ignore abort check when no user-helper is used
firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER
firmware: Make user-mode helper optional
firmware: Refactoring for splitting user-mode helper code
Driver core: treat unregistered bus_types as having no devices
watchdog: Convert to devm_ioremap_resource()
thermal: Convert to devm_ioremap_resource()
spi: Convert to devm_ioremap_resource()
power: Convert to devm_ioremap_resource()
mtd: Convert to devm_ioremap_resource()
mmc: Convert to devm_ioremap_resource()
mfd: Convert to devm_ioremap_resource()
media: Convert to devm_ioremap_resource()
iommu: Convert to devm_ioremap_resource()
drm: Convert to devm_ioremap_resource()
...
All in-kernel users of class_find_device() don't really need mutable
data for match callback.
In two places (kernel/power/suspend_test.c, drivers/scsi/osd/osd_uld.c)
this patch changes match callbacks to use const search data.
The const is propagated to rtc_class_open() and power_supply_get_by_name()
parameters.
Note that there's a dev reference leak in suspend_test.c that's not
touched in this patch.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michał Mirosławauthored and Greg Kroah-Hartmancommited 2013-02-06 12:18:56 -08:00
As most of the charger chips come with two kinds of safety features
related to timing:
1. Watchdog Timer (interms of seconds/mins)
2. Safety Timer (interms of hours)
This patch adds these to fault causes in POWER_SUPPLY_PROP_HEALTH_* enums
so that whenever there is either watchdog timeout or safety timer timeout
driver could notify the user space accurately about the fault and will
also be helpful for debug.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2013-01-05 18:51:18 -08:00
This patch registers the power supply as a cooling device if the power
supply has support for charge throttling.
Now with this change low level drivers need not register with thermal
framework as it is automatically done by power supply framework.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2012-11-17 20:32:33 -08:00
Add support for power supply attributes CHARGE_CONTROL_LIMIT
and CHARGE_CONTROL_LIMIT_MAX.
These new attributes will enable the user space to implement
custom charging algorithms based on platform state.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2012-11-17 20:21:43 -08:00
There are different types of chargers avalibale like AC, Solar, USB,
etc.. Even in USB we have different types SDP/DCP/CDP/ACA and all these
chargers have different o/p ratings. For example SDP supports only 500mA
of charge current whereas AC charger can support upto 8A or more.
Similarly batteries also come with charge current and voltage ratings
and these ratings vary depending on its capacity and the technology
used.
This patch adds two new power supply properties
CONSTANT_CHARGE_CURRENT_MAX and CONSTANT_CHARGE_CURRENT_MAX.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2012-08-22 21:59:15 -07:00
It is possible that users can use non-standard chargers or use invalid
batteries especially with mobile devices.
This patch adds a new power supply property called 'AUTHENTIC' to
indicate this to the user(user space).
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2012-08-22 19:56:37 -07:00
Minimum and maximum alerts on power supply properties will help or allow
the user space to "proactively" create policies like connect/disconnect
charger or stop/start the user apps based on capacity or temperature
parameters.
These parameters can be used to avoid unnecessary polling from user space
and even from kernel space if the underlying HW can support INT triggers
(ex: max17042/47).
This patch adds the following power supply alert type properties:
CAPACITY_ALERT_MIN
CAPACITY_ALERT_MAX
TEMP_ALERT_MIN
TEMP_ALERT_MAX
TEMP_AMBIENT_ALERT_MIN
TEMP_AMBIENT_ALERT_MAX
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2012-07-13 20:41:58 -07:00
Constant Charge Current(CC) is charging parameter which limit the
maximum current which can be pumped into the battery during charge cycle.
Constant Charge Voltage(CV) is also charging parameter which limit the
maximum voltage that battery can reach during charge cycle.
It is very common practice that at low or high temperatures we
do not charge the batteries upto it's fullest charge voltage
to avoid battery and user safety issues.
These sysfs properties will be useful for debug and to implement
certain user space policies like "Charging limited due to OverTemp".
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2012-06-19 16:46:58 -07:00
Battery and charger contribute to Thermals in most of the embedded
devices. So, it makes sense to identify them as Thermal zones in a
particular platform.
This patch registers a thermal zone if the power supply is reporting
a temperature property. The thermal zone will be used by platform's
thermal management solution.
Signed-off-by: Jenny TC <jenny.tc@intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Jenny TCauthored and Anton Vorontsovcommited 2012-06-17 21:25:39 -07:00
On Mon, Apr 02, 2012 at 01:53:23PM +1000, Benjamin Herrenschmidt wrote:
> > drivers/built-in.o: In function `.nouveau_pm_trigger':
> > (.text+0xa56e8): undefined reference to `.power_supply_is_system_supplied'
> >
> > nouveau probably needs to depends on CONFIG_POWER_SUPPLY to force a module
> > build with the latter is =m
>
> Ok, not that trivial...
>
> The problem is more like POWER_SUPPLY should be a bool, not a tristate.
>
> If you think about it: you don't want things like nouveau to depend on a
> random subsystem like that, people will never get it. In fact,
> POWER_SUPPLY provides empty inline stubs when not enabled, so that's
> really designed to not have depends...
>
> However that -cannot- work if POWER_SUPPLY is modular and the drivers
> who use it are not.
>
> The only fixes here that make sense I can think of
> that don't also involve Kconfig horrors are:
>
> - Ugly: in power_supply.h, use the extern variant if
>
> defined(CONFIG_POWER_SUPPLY) ||
> (defined(CONFIG_POWER_SUPPLY_MODULE) && defined(MODULE))
>
> IE. use the stub if power supply is a module and what is being built is
> built-in. Of course that's not only ugly, it somewhat sucks from a user
> perspective as the subsystem now exists but can't be used by some
> drivers...
>
> - Better: Just make the bloody thing a bool :-) The power supply
> framework itself is small enough, just make it a boolean option and
> avoid the problem entirely. The actual power supply sub drivers can
> remain modular of course.
Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Anton Vorontsovcommited 2012-05-04 21:15:52 -07:00
This adds a new sysfs file called 'voltage_ocv' which gives the
Open Circuit Voltage of the battery.
This property can be used for platform shutdown policies and
can be useful for initial capacity estimations.
Note: This patch is generated against linux-next branch.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Ramakrishna Pallalaauthored and Anton Vorontsovcommited 2012-05-04 20:44:29 -07:00
The <linux/device.h> header includes a lot of stuff, and
it in turn gets a lot of use just for the basic "struct device"
which appears so often.
Clean up the users as follows:
1) For those headers only needing "struct device" as a pointer
in fcn args, replace the include with exactly that.
2) For headers not really using anything from device.h, simply
delete the include altogether.
3) For headers relying on getting device.h implicitly before
being included themselves, now explicitly include device.h
4) For files in which doing #1 or #2 uncovers an implicit
dependency on some other header, fix by explicitly adding
the required header(s).
Any C files that were implicitly relying on device.h to be
present have already been dealt with in advance.
Total removals from #1 and #2: 51. Total additions coming
from #3: 9. Total other implicit dependencies from #4: 7.
As of 3.3-rc1, there were 110, so a net removal of 42 gives
about a 38% reduction in device.h presence in include/*
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
For the default value of power supply type, "unknown" is added.
With default prop value, supply type property can be displayed
as default - "Unknown".
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Kim, Miloauthored and Anton Vorontsovcommited 2012-01-04 09:05:51 +04:00
If a power supply has a scope of "Device", then allow the power supply
to indicate what device it actually powers. This is represented in the
power supply's sysfs directory as a symlink named "powers", which points to
the sysfs directory of the powered device.
If the device has children, then the sub-devices are also powered by
the same power supply.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Richard Hughes <richard@hughsie.com>
Jeremy Fitzhardingecommited 2011-12-09 09:52:07 -08:00
This adds a "scope" attribute to a power_supply, which indicates how
much of the system it powers. It appears in sysfs as "scope" or in
the uevent file as POWER_SUPPLY_SCOPE=. There are presently three
possible values:
Unknown - unknown power topology
System - the power supply powers the whole system
Device - it powers a specific device, or tree of devices
A power supply which doesn't have a "scope" attribute should be assumed to
have "System" scope.
In general, usermode should assume that loss of all System-scoped power
supplies will power off the whole system, but any single one is sufficient
to power the system.
Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Richard Hughes <richard@hughsie.com>
Jeremy Fitzhardingecommited 2011-12-09 09:42:05 -08:00
Update the power_supply_is_watt_property function to include POWER_NOW.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Rhyland Kleinauthored and Anton Vorontsovcommited 2011-03-01 22:27:26 +03:00
Add new trigger to power_supply LEDs. It will blink when battery is
charging, and stay solid when battery is charged. It's usefull to
indicate battery state when there's only one LED available.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Vasily Khoruzhickauthored and Anton Vorontsovcommited 2011-01-31 16:31:51 +03:00
Adding support for charge properties for gas gauge.
Also ensuring that battery mode is correct now for energy as well as
charge properties by setting it on the fly.
I also added 2 functions to power_supply.h to help identify the units for
specific properties more easily by power supplies.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Rhyland Kleinauthored and Anton Vorontsovcommited 2011-01-31 16:18:33 +03:00
USB only gives the maximum current allowed to draw.
Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Heikki Krogerusauthored and Anton Vorontsovcommited 2010-10-06 17:37:22 +04:00
This adds power supply types for USB chargers defined in
Battery Charging Specification 1.1.
Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Heikki Krogerusauthored and Anton Vorontsovcommited 2010-10-06 17:37:09 +04:00
This patch adds support for writeable power supply properties and
exposes them as writeable to sysfs.
A power supply implementation must implement two new function calls in
order to use that feature:
int set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val);
int property_is_writeable(struct power_supply *psy,
enum power_supply_property psp);
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Matt Reimer <mreimer@vpop.net>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Daniel Mackauthored and Anton Vorontsovcommited 2010-05-19 12:14:42 +04:00
This fixes a race between power supply device and initial
attributes creation, plus makes it possible to implement
writable properties.
[Daniel Mack - removed superflous return statement
and dropped .mode attribute from POWER_SUPPLY_ATTR]
Suggested-by: Greg KH <gregkh@suse.de>
Suggested-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
Anton Vorontsovcommited 2010-05-19 12:14:28 +04:00
This adds a function that indicates that a battery is fully charged.
It also includes functions to get a power_supply device from the class
of registered devices by name reference. These can be used to find a
specific battery to call power_supply_set_battery_charged() on.
Some battery drivers might need this information to calibrate
themselves.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Ian Molton <spyro@f2s.com>
Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Matt Reimer <mreimer@vpop.net>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Daniel Mackauthored and Anton Vorontsovcommited 2009-07-30 17:49:15 +04:00
This adds a new sysfs file called 'charge_type' which displays the
type of charging (unknown, n/a, trickle charge, or fast charging).
This allows things like battery diagnostics to determine what the
battery/EC is doing without resorting to changing the 'status' sysfs
output.
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Andres Salomonauthored and Anton Vorontsovcommited 2009-07-02 18:14:37 +04:00
This reverts commit 8efe444038 and
4cbc76eadf.
Richard@laptop.org was apparently using CAPACITY_LEVEL for debugging
battery/EC problems, and was upset that it was removed. This readds it.
Conflicts:
Documentation/power_supply_class.txt
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Andres Salomonauthored and Anton Vorontsovcommited 2009-07-01 02:44:03 +04:00
ACPI has smart batteries, which work in units of energy and measure
rate of (dis)charge as power, thus it is not appropriate to export it
as a current_now. Current_now will still be exported to allow
for userland applications to match.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Alexey Starikovskiyauthored and Len Browncommited 2009-03-27 22:23:52 -04:00
Some systems are able to report problems with batteries being under
temperature.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
Mark Brownauthored and Samuel Ortizcommited 2009-01-04 12:17:39 +01:00
Certain drivers benefit from knowing whether the system is on ac or
battery, for instance when determining which backlight registers to
read. This adds a simple call to determine whether there's an online
power supply other than any batteries.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Matthew Garrettauthored and Anton Vorontsovcommited 2008-09-01 02:42:54 +04:00
This adds PROP_CHARGE_COUNTER to the power supply class (documenting it
as well). The OLPC battery driver uses this for spitting out its ACR
values (in uAh). We have some rounding errors (the data sheet claims
416.7, the math actually works out to 416.666667, so we're forced to
choose between overflows or precision loss. I chose precision loss,
and stuck w/ data sheet values), but I don't think anyone will care
that much.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Andres Salomonauthored and Anton Vorontsovcommited 2008-05-13 12:27:11 +04:00
egrep serial /proc/acpi/battery/BAT0/info
serial number: 32090
serial number can tell you from the imminent danger
of beeing set on fire.
Signed-off-by: maximilian attems <max@stro.at>
Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
maximilian attemsauthored and Len Browncommited 2008-02-05 21:15:50 -05:00
Add LiMn (one of the most common for small non-rechargable batteries)
battery technology and voltage_min/_max properties support.
Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
Dmitry Baryshkovauthored and Anton Vorontsovcommited 2008-02-02 02:43:00 +03:00
The CAPACITY_LEVEL stuff defines various levels of charge; however, what
is the difference between them? What differentiates between HIGH and NORMAL,
LOW and CRITICAL, etc?
As it appears that these are fairly arbitrary, we end up making such policy
decisions in the kernel (or in hardware). This is the sort of decision that
should be made in userspace, not in the kernel.
If the hardware does not support _CAPACITY and it cannot be easily calculated,
then perhaps the driver should register a custom CAPACITY_LEVEL attribute;
however, userspace should not become accustomed to looking for such a thing,
and we should certainly not encourage drivers to provide CAPACITY_LEVEL
stubs.
The following removes support for POWER_SUPPLY_PROP_CAPACITY_LEVEL. The
OLPC battery driver is the only driver making use of this, so it's
removed from there as well.
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Andres Salomonauthored and Anton Vorontsovcommited 2008-02-02 02:42:59 +03:00
This class is result of "external power" and "battery" classes merge,
as suggested by David Woodhouse. He also implemented uevent support.
Here how userspace seeing it now:
# ls /sys/class/power\ supply/
ac main-battery usb
# cat /sys/class/power\ supply/ac/type
AC
# cat /sys/class/power\ supply/usb/type
USB
# cat /sys/class/power\ supply/main-battery/type
Battery
# cat /sys/class/power\ supply/ac/online
1
# cat /sys/class/power\ supply/usb/online
0
# cat /sys/class/power\ supply/main-battery/status
Charging
# cat /sys/class/leds/h5400\:red-left/trigger
none h5400-radio timer hwtimer ac-online usb-online
main-battery-charging-or-full [main-battery-charging]
main-battery-full
Signed-off-by: Anton Vorontsov <cbou@mail.ru>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Anton Vorontsovauthored and David Woodhousecommited 2007-07-10 11:25:44 +01:00
Viresh Kumar
authored and
Sebastian Reichel
commited 
Ramakrishna Pallala
authored and
Jenny TC
authored and
Zhang Rui
authored and
Rafael J. Wysocki
commited 
Sebastian Reichel
authored and
Anton Vorontsov
commited 
Pali Rohár
authored and
Zoran Markovic
authored and
Rhyland Klein
authored and
Linus Torvalds
commited 
Michał Mirosław
authored and
Greg Kroah-Hartman
commited 
Anton Vorontsov
commited 
Anton Vorontsov
commited 
Paul Gortmaker
commited 
Kim, Milo
authored and
Jeremy Fitzhardinge
commited 
Vasily Khoruzhick
authored and
Heikki Krogerus
authored and
Daniel Mack
authored and
Alexey Starikovskiy
authored and
Len Brown
commited 
Andres Salomon
authored and
Mark Brown
authored and
Samuel Ortiz
commited 
Matthew Garrett
authored and
Andres Salomon
authored and
maximilian attems
authored and
Dmitry Baryshkov
authored and
Andres Salomon
authored and
Anton Vorontsov
authored and
David Woodhouse
commited